Self-calibrated 3D differential phase contrast microscopy with optimized illumination

Plug-and-play DPC-based quantitative phase microscope

Point-of-care testing (POCT) plays an increasingly important role in biomedical research and health care. Quantitative phase microscopes (QPMs) with good contrast, no invasion, no labeling, high speed and automation could be effectively applied for POCT. However, most QPMs are fixed on the optical platform with bulky size, lack of timeliness, which remained challenging in POCT solutions. In this paper, we proposed a plug-and-play QPM with multimode imaging based on the quantitative differential phase contrast (qDPC) method. The system employs a programmable LED array as the light source and uses the GPU to accelerate the calculation, which can realize multi-contrast imaging with six modes. Accurate phase measurement and real-time phase imaging are implemented by the proposed qDPC algorithms for quantitative phase targets and biomedical samples. A 3D electric control platform is designed for mechanical control of field of view and focusing without manual operations. The experimental results verify the robustness and high performance of the setup. Even a rookie could finish the POCT scheme for biomedical applications at the scene using the QPM with a compact size of 140 × 165 × 250 mm3.

Recent Advances and Current Trends in Transmission Tomographic Diffraction Microscopy

Optical microscopy techniques are among the most used methods in biomedical sample characterization. In their more advanced realization, optical microscopes demonstrate resolution down to the nanometric scale. These methods rely on the use of fluorescent sample labeling in order to break the diffraction limit. However, fluorescent molecules' phototoxicity or photobleaching is not always compatible with the investigated samples. To overcome this limitation, quantitative phase imaging techniques have been proposed. Among these, holographic imaging has demonstrated its ability to image living microscopic samples without staining. However, for a 3D assessment of samples, tomographic acquisitions are needed. Tomographic Diffraction Microscopy (TDM) combines holographic acquisitions with tomographic reconstructions. Relying on a 3D synthetic aperture process, TDM allows for 3D quantitative measurements of the complex refractive index of the investigated sample. Since its initial proposition by Emil Wolf in 1969, the concept of TDM has found a lot of applications and has become one of the hot topics in biomedical imaging. This review focuses on recent achievements in TDM development. Current trends and perspectives of the technique are also discussed.

Three-dimensional refractive index estimation based on deep-inverse non-interferometric optical diffraction tomography (ODT-Deep)

Optical diffraction tomography (ODT) solves an inverse scattering problem to obtain label-free, 3D refractive index (RI) estimation of biological specimens. This work demonstrates 3D RI retrieval methods suitable for partially-coherent ODT systems supported by intensity-only measurements consisting of axial and angular illumination scanning. This framework allows for access to 3D quantitative RI contrast using a simplified non-interferometric technique. We consider a traditional iterative tomographic solver based on a multiple in-plane representation of the optical scattering process and gradient descent optimization adapted for focus-scanning systems, as well as an approach that relies solely on 3D convolutional neural networks (CNNs) to invert the scattering process. The approaches are validated using simulations of the 3D scattering potential for weak phase 3D biological samples.

Hybrid full-pose parameter calibration of a freeform illuminator for Fourier ptychographic microscopy

As a typical computational method, Fourier ptychographic microscopy (FPM) can realize high spatial resolution and quantitative phase imaging while preserving the large field of view with a low numerical aperture (NA) objective. A programmable light-emitting diode (LED) array is used as a typical illuminator in an FPM system, and the illumination parameters of each LED element are crucial to the success of the FPM reconstruction algorithm. Compared with LED arrays arranged in rectangular arrays, LED arrays with special structures such as domes or rings can effectively improve FPM imaging results and imaging efficiency. As a trade-off, their calibration difficulty is greatly increased due to the lack of geometric constraints of rectangular arrays. In this paper, we propose an effective hybrid full-pose parameter calibration method for freeform LED array illuminators, combining stereoscopic 3D imaging techniques and the geometric constraints of the microscopic platform. First, a stereovision system is used to obtain the accurate 3D position of each LED element of the freeform illuminator and to construct a rigid 3D coordinate LED array system. Then, calibration between the coordinate system of the LED array and that of the optical imaging component is realized according to the geometric features of the brightfield-to-darkfield edges. Finally, we verify the feasibility and effectiveness of the proposed method through full-pose parameter calibration of LED arrays with different arrangement rules.

Embedded parallel Fourier ptychographic microscopy reconstruction system

Fourier ptychographic microscopy (FPM) has attracted a wide range of focus for its ability of large space-bandwidth product and quantitative phase imaging. It is a typical computational imaging technique that jointly optimizes imaging hardware and reconstruction algorithms. The data redundancy and inverse problem algorithms are the sources of FPM's excellent performance. But at the same time, this large amount of data processing and complex algorithms also evidently reduce the imaging speed. To accelerate the FPM reconstruction speed, we proposed a fast FPM reconstruction framework consisting of three levels of parallel computation and implemented it with an embedded computing module. In the conventional FPM framework, the sample image is divided into multiple sub-regions to process separately because the illumination angles and defocus distances for different sub-regions may also be different. Our parallel framework first performs digital refocusing and high-resolution reconstruction for each sub-region separately and then stitches the complex sub-regions together to obtain the final high-resolution complex image. The feasibility of the proposed parallel FPM reconstruction framework is verified with different experimental results acquired with the system we built.

Quantitative Phase Imaging: Recent Advances and Expanding Potential in Biomedicine

Quantitative phase imaging (QPI) is a label-free, wide-field microscopy approach with significant opportunities for biomedical applications. QPI uses the natural phase shift of light as it passes through a transparent object, such as a mammalian cell, to quantify biomass distribution and spatial and temporal changes in biomass. Reported in cell studies more than 60 years ago, ongoing advances in QPI hardware and software are leading to numerous applications in biology, with a dramatic expansion in utility over the past two decades. Today, investigations of cell size, morphology, behavior, cellular viscoelasticity, drug efficacy, biomass accumulation and turnover, and transport mechanics are supporting studies of development, physiology, neural activity, cancer, and additional physiological processes and diseases. Here, we review the field of QPI in biology starting with underlying principles, followed by a discussion of technical approaches currently available or being developed, and end with an examination of the breadth of applications in use or under development. We comment on strengths and shortcomings for the deployment of QPI in key biomedical contexts and conclude with emerging challenges and opportunities based on combining QPI with other methodologies that expand the scope and utility of QPI even further.