A largely tunable CFBG-based dispersion compensator with fixed center wavelength

High-speed ADC based on photonic time-stretched technology with dispersion-tunable CFBG

We propose a photonic time-stretched analog-to-digital converter (PTS-ADC) based on dispersion-tunable chirped fiber Bragg grating (CFBG), by demonstrating a economical ADC system with seven different stretch factors. The stretch factors are tunable by changing the dispersion of CFBG, in order to obtain different sampling points. Accordingly, the total sampling rate of the system can be improved. Only a single channel is required to increase the sampling rate and achieve the effect of multi-channel sampling. Finally, seven groups of different stretch factors ranging from 1.882 to 2.206 are obtained, which are equivalent to seven groups of different sampling points. We successfully recover the input radio frequency (RF) signals with frequencies from 2 GHz to 10 GHz. In addition, the sampling points are increased by 14.4 times and the equivalent sampling rate is increased to 288 GSa/s. The proposed scheme is suitable for commercial microwave radar systems, which can obtain a much higher sampling rate at a low cost.

Reflection spectra of etched FBGs under the influence of axial contraction and stress-induced index change

We present a new theoretical model for the broadband reflection spectra of etched FBGs which includes the effects of axial contraction and stress-induced index change. The reflection spectra of the etched FBGs with several different taper profiles are simulated based on the proposed model. In our observation, decaying exponential profile produces a broadband reflection spectrum with good uniformity over the range of 1540-1560 nm. An etched FBG with similar taper profile is fabricated and the experimental result shows good agreement with the theoretical model.

Optically tunable chirped fiber Bragg grating

This work presents an optically tunable chirped fiber Bragg grating (CFBG). The CFBG is obtained by a side-polished fiber Bragg grating (SPFBG) whose thickness of the residual cladding layer in the polished area (D(RC)) varies with position along the length of the grating, which is coated with a photoresponsive liquid crystal (LC) overlay. The reflection spectrum of the CFBG is tuned by refractive index (RI) modulation, which comes from the phase transition of the overlaid photoresponsive LC under ultraviolet (UV) light irradiation. The broadening in the reflection spectrum and corresponding shift in the central wavelength are observed with UV light irradiation density of 0.64mW/mm. During the phase transition of the photoresponsive LC, the RI increase of the overlaid LC leads to the change of the CFBG reflection spectrum and the change is reversible and repeatable. The optically tunable CFBGs have potential use in optical DWDM system and an all-fiber telecommunication system.

Fabricating fiber Bragg gratings with two phase masks based on reconstruction-equivalent-chirp technique

Based on reconstruction-equivalent-chirp (REC) technique, a novel solution for fabricating low-cost long fiber Bragg gratings (FBGs) with desired properties is proposed and initially studied. A proof-of-concept experiment is demonstrated with two conventional uniform phase masks and a submicron-precision translation stage, successfully. It is shown that the original phase shift (OPS) caused by phase mismatch of the two phase masks can be compensated by the equivalent phase shift (EPS) at the ±1st channels of sampled FBGs, separately. Furthermore, as an example, a π phase-shifted FBG of about 90 mm is fabricated by using these two 50mm-long uniform phase masks based on the presented method.

Tunable microwave generation based on a dual-wavelength single-longitudinal-mode fiber laser using a phase-shifted grating on a triangular cantilever

Frequency tunable microwave signal generation, based on a dual-wavelength single-longitudinal-mode (SLM) erbium-doped fiber (EDF) laser, incorporating a phase-shifted fiber Bragg grating (PS-FBG) with two π-phase shifts, is demonstrated. In the proposed configuration, the PS-FBG with two ultranarrow transmission bands is embedded in a triangular cantilever to serve as a wavelength spacing tunable filter with a fixed center wavelength by applying various strains on the cantilever. A section of unpumped EDF is employed as a saturable absorber to ensure SLM operation in each of the two lasing lines. By beating the two wavelengths at a photodiode, a tunable microwave signal ranging from 8.835 to 24.360 GHz is successfully achieved.

Optimization of distributed resistive metal film heaters in thermally tunable dispersion compensators for high-bit-rate communication systems

Tunable dispersion compensators are an essential component for optical networks operating at 40 Gbits/s and beyond. One fiber-based tunable dispersion compensator that has proved to be effective consists of a chirped fiber Bragg grating tuned by a thin-film distributed resistive heating element. We describe several modifications to the heater design that minimize temperature-induced higher-order dispersion, eliminate the need for a second stabilization heater when the device is operated at constant ambient temperature, and significantly lower its maximum operating temperature. We demonstrate a tunable dispersion compensator with a single thin-film heater that provides over 500 ps/nm of tunable dispersion over a fixed 100-GHz bandwidth with a maximum operating temperature of less than 125 degrees C above ambient.