Nanometer-thick Au-films as antireflection coating for infrared light

Ultrathin 2 nm gold as impedance-matched absorber for infrared light

Thermal detectors are a cornerstone of infrared and terahertz technology due to their broad spectral range. These detectors call for efficient absorbers with a broad spectral response and minimal thermal mass. A common approach is based on impedance-matching the sheet resistance of a thin metallic film to half the free-space impedance. Thereby, one can achieve a wavelength-independent absorptivity of up to 50%. However, existing absorber films typically require a thickness of the order of tens of nanometers, which can significantly deteriorate the response of a thermal transducer. Here, we present the application of ultrathin gold (2 nm) on top of a surfactant layer of oxidized copper as an effective infrared absorber. An almost wavelength-independent and long-time stable absorptivity of 47(3)%, ranging from 2 μm to 20 μm, can be obtained. The presented absorber allows for a significant improvement of infrared/terahertz technologies in general and thermal detectors in particular.

Long-term stability and broad spectral response are highly desired features of absorbers. Here, the authors report impedance matched absorbers based on 2 nm thick gold layer operating within the mid-infrared range from 2 to 20 μm, enabling stable long term absorptivity of 47(3) % which is mostly wavelength independent.

Au quantum dots engineered room temperature crystallization and magnetic anisotropy in CoFe2O4 thin films

For the first time, this work presents a novel room temperature time-effective concept to manipulate the crystallization kinetics and magnetic responses of thin films grown on amorphous substrates. Conventionally, metal-induced crystallization is adopted to minimize the crystallization temperature of the upper-layer thin film. However, due to the limited surface area of the continuous metal under-layer, the degree of crystallization is insufficient and post-annealing is required. To expose a large surface area of the metal under-layer, we propose a simple and novel approach of using an Au nanodots array instead of a continuous metallic under-layer to obtain crystallization of upper-layer thin films. Spinel cobalt ferrite (CFO) thin film as a 'model' was deposited on an Au nano-dots array to realize this methodology. Our findings revealed that the addition of quantum-sized Au nano-dots as a metal under-layer dramatically enhanced the crystallization of the cobalt ferrite upper layer at room temperature. The appearance of major X-ray diffraction peaks with high intensity and well-defined crystallized lattice planes observed via transmission electron microscopy confirmed the crystallization of the CFO thin film deposited at room temperature on 4 nm-sized Au nano-dots. This crystallized CFO thin film exhibits 18-fold higher coercivity (H_c = 4150 Oe) and 4-fold higher saturation magnetization (M_s = 262 emu cm^-3) compared to CFO deposited without the Au under-layer. The development of this novel concept of room-temperature crystallization without the aid of additives and solvents represents a crucial breakthrough that is highly significant for exploring the green and energy-efficient synthesis of a variety of oxide and metal thin films.

Effective method to study the thickness-dependent dielectric functions of nanometal thin film

A new method for measuring the dielectric functions change with the thickness of nanometal thin films was proposed. To confirm the accuracy and reliability of the method, a nano-thin wedge-shaped gold (Au) film with continuously varied thicknesses was designed and prepared on K9 glass by direct-current-sputtering (DC-sputtering). The thicknesses and the dielectric functions in the wavelength range of 300-1100 nm of the nano-thin Au films were obtained by fitting the ellipsometric parameters with the Drude and critical points model. Results show that while the real part of the dielectric function (ϵ₁) changes marginally with increasing film thickness, the imaginary part (ϵ₂) decreases drastically with the film thickness, approaching a stable value when the film thickness increases up to about 42 nm. This method is particularly useful in the study of thickness-dependent optical properties of nano-thin film.

Real-Time Monitoring of Morphology and Optical Properties during Sputter Deposition for Tailoring Metal-Polymer Interfaces

The reproducible low-cost fabrication of functional metal-polymer nanocomposites with tailored optoelectronic properties for advanced applications remains a major challenge in applied nanotechnology. To obtain full control over the nanostructural evolution at the metal-polymer interface and its impact on optoelectronic properties, we employed combined in situ time-resolved microfocus grazing incidence small angle X-ray scattering (μGISAXS) with in situ UV/vis specular reflectance spectroscopy (SRS) during sputter deposition of gold on thin polystyrene films. On the basis of the temporal evolution of the key scattering features in the real-time μGISAXS experiment, we directly observed four different growth regimes: nucleation, isolated island growth, growth of larger aggregates via partial coalescence, and continuous layer growth. Moreover, their individual thresholds were identified with subnanometer resolution and correlated to the changes in optical properties. During sputter deposition, a change in optical reflectivity of the pristine gray-blue PS film was observed ranging from dark blue color due to the presence of isolated nanoclusters at the interface to bright red color from larger Au aggregates. We used simplified geometrical assumptions to model the evolution of average real space parameters (distance, size, density, contact angle) in excellent agreement with the qualitative observation of key scattering features. A decrease of contact angles was observed during the island-to-percolation transition and confirmed by simulations. Furthermore, a surface diffusion coefficient according to the kinetic freezing model and interfacial energy of Au on PS at room temperature were calculated based on a real-time experiment. The morphological characterization is complemented by X-ray reflectivity, optical, and electron microscopy. Our study permits a better understanding of the growth kinetics of gold clusters and their self-organization into complex nanostructures on polymer substrates. It opens up the opportunity to improve nanofabrication and tailoring of metal-polymer nanostructures for optoelectronic applications, organic photovoltaics, and plasmonic-enhanced technologies.

Terahertz-field-induced nonlinear electron delocalization in Au nanostructures

Improved control over the electromagnetic properties of metal nanostructures is indispensable for the development of next-generation integrated nanocircuits and plasmonic devices. The use of terahertz (THz)-field-induced nonlinearity is a promising approach to controlling local electromagnetic properties. Here, we demonstrate how intense THz electric fields can be used to modulate electron delocalization in percolated gold (Au) nanostructures on a picosecond time scale. We prepared both isolated and percolated Au nanostructures deposited on high resistivity Si(100) substrates. With increasing the applied THz electric fields, large opacity in the THz transmission spectra takes place in the percolated nanostructures; the maximum THz-field-induced transmittance difference, 50% more, is reached just above the percolation threshold thickness. Fitting the experimental data to a Drude-Smith model, we found furthermore that the localization parameter and the damping constant strongly depend on the applied THz-field strength. These results show that ultrafast nonlinear electron delocalization proceeds via strong electric field of THz pulses; the intense THz electric field modulates the backscattering rate of localized electrons and induces electron tunneling between Au nanostructures across the narrow insulating bridges without any material breakdown.

Optical nonreciprocity with large bandwidth in asymmetric hybrid slot waveguide coupler

On-chip broadband optical nonreciprocal transmission based on asymmetric hybrid slot waveguide (HSW) coupler is proposed. Filled with flint glass LaSF-010 and organic material DDMEBT in slots, respectively, two branches of an asymmetric HSW coupler have very distinct nonlinear coefficients, yet very close effective indexes. Since asymmetric coupler with low linear mismatch has a large free spectral range, the results show that our device has a 10-dB nonreciprocal transmission bandwidth (NTB) as large as about 66 nm corresponding to 80-mW operating power. The NTB could be even larger when the incident power is raised. This indicates over two orders of magnitude enhancement compared to previous on-chip passive schemes. Owing to the large NTB, the device also functions properly for sub-picosecond pulses. Our scheme paves a path toward practical all-optical nonreciprocal applications.

From atoms to layers: in situ gold cluster growth kinetics during sputter deposition

The adjustment of size-dependent catalytic, electrical and optical properties of gold cluster assemblies is a very significant issue in modern applied nanotechnology. We present a real-time investigation of the growth kinetics of gold nanostructures from small nuclei to a complete gold layer during magnetron sputter deposition with high time resolution by means of in situ microbeam grazing incidence small-angle X-ray scattering (μGISAXS). We specify the four-stage growth including their thresholds with sub-monolayer resolution and identify phase transitions monitored in Yoneda intensity as a material-specific characteristic. An innovative and flexible geometrical model enables the extraction of morphological real space parameters, such as cluster size and shape, correlation distance, layer porosity and surface coverage, directly from reciprocal space scattering data. This approach enables a large variety of future investigations of the influence of different process parameters on the thin metal film morphology. Furthermore, our study allows for deducing the wetting behavior of gold cluster films on solid substrates and provides a better understanding of the growth kinetics in general, which is essential for optimization of manufacturing parameters, saving energy and resources.

Near-infrared surface plasmon polariton dispersion control with hyperbolic metamaterials

We demonstrate experimentally signatures and dispersion control of surface plasmon polaritons from 1 to 1.8 µm using periodic multilayer metallo-dielectric hyperbolic metamaterials. The fabricated structures are comprised of smooth films with very low metal filling factor. The measured dispersion properties of these hyperbolic metamaterials agree well with calculations using transfer matrix, finite-difference time-domain, and effective medium approximation methods despite using only 2.5 periods. The enhancement factor in the local photonic density of states from the studied samples in the near-infrared wavelength region is determined to be 2.5-3.5. Development of this type of metamaterial is relevant to sub-wavelength imaging, spontaneous emission and thermophotovoltaic applications.

Tailoring the refractive indices of thin film polymer metallic nanoparticle nanocomposites

We demonstrate how to tailor the spatial distribution of gold nanoparticles (Au-NPs) of different sizes within polystyrene (PS) thin, supported, film hosts, thereby enabling the connection between the spatial distribution of Au-NPs within the polymer film and the optical properties to be determined. The real, n, and imaginary parts, k, of the complex refractive indices N = n(λ)+ik(λ) of the nanocomposite films were measured as a function of wavelength, λ, using multivariable angle spectroscopic ellipsometry. The surface plasmon response of films containing nearly homogeneous Au-NP distributions were well described by predictions based on classical Mie theory and the Drude model. The optical spectra of samples containing inhomogeneous nanoparticle distributions manifest features associated with differences in the size and interparticle spacings as well as the proximity and organization of nanoparticles at the substrate and free surface.

Well-confined surface plasmon polaritons for sensing applications in the near-infrared

The surface plasmon polariton (SPP) dispersion at the interface between a dielectric half-space and a layered metallodielectric metamaterial is investigated. By varying the material constituants, it is shown that the SPP resonance frequency can be readily shifted to the near-IR. Through numerical simulations, the validity domain of homogenization and the effects of the finite number of layers in the metamaterial are studied. It is found that as few as N=2 periods are sufficient for practical operation. These results reveal the potential of employing metallodielectric stacks for sensing applications in the near-IR regime.

How holes can obscure the view: suppressed transmission through an ultrathin metal film by a subwavelength hole array

If a metal film, thick enough to be totally opaque, is perforated by tiny subwavelength holes in an orderly fashion, the transmission will be enhanced extraordinarily [T. W. Ebbesen, Nature (London) 391, 667 (1998)]. Here, we investigate the transmission through an ultrathin semitransparent Au film with a square array of subwavelength holes and observe the opposite behavior: less light is transmitted through the pierced metal compared to the closed film.