Comparison of Hydrophilic Polymeric Sorbents for On-Line Solid-Phase Extraction of Polar Compounds from Aqueous Samples

Effects of pendant-like hydrophilic monomers on the adsorption properties of reversed-phase-type sorbents for solid-phase extraction

Solid-phase extraction (SPE) has been extensively employed as a pretreatment method. In SPE, reversed-phase-type sorbents have been widely applied for the pretreatment of environmental or biological samples. Hydrophilic-lipophilic balance (HLB)-type sorbents, constituting the copolymers used as reversed-phase-type sorbents, have been applied for various sample pretreatment methods. In HLB-type sorbents, the hydrophilic monomer contributes to the improved wettability of sorbents and increase of polar interactions. In this study, three pendant-like hydrophilic monomers, viz. N-vinylpyrrolidone (NVP), 4-acryloylmorpholine (AMO), and 4-vinyl-1,3-dioxolan-2-one (VDO), respectively, exhibiting different Log P values and possibly causing different polar interactions, were selected to improve the adsorption properties of polar compounds, and divinylbenzene (DVB)-based HLB-type sorbents containing each hydrophilic monomer were synthesized and examined. By the optimization of the molar ratio of DVB and the hydrophilic monomer (i.e. HLB), the inert diluent, and the degree of cross-linking, the developed sorbents exhibited higher recoveries for various polar compounds (viz. cytosine, uracil, cytidine, uridine, 2'-deoxycytidine, 2'-deoxyguanosine, adenine, thymidine, adenosine, and 2'-deoxyadenosine) compared to commercially available HLB-type sorbents.

Effects of hydrophilic monomers on sorptive properties of divinylbenzene-based reversed phase sorbents

Solid phase extraction (SPE) has been extensively used as a pretreatment method. In SPE methods, commercially available reversed phase type sorbents, which consist of macroporus styrene-divinylbenzene or copolymers including divinylbenzene (DVB) and hydrophilic monomers, have been applied to a variety of samples. The later sorbents are called hydrophilic lipophilic balanced (HLB) type sorbents. Hydrophilic monomers in hydrophilic lipophilic balanced type sorbents contribute to the increase in retention of polar compounds, because hydrophilic monomers improve the wettability and increase the interaction with polar compounds as analytes. In this study, three different methacrylate monomers (ethylene glycol dimethacrylate (EGDMA), glycerol dimethacrylate (GDMA) and trimethylolpropane trimethacrylate (TMPTMA)), which are expected to improve the retention of polar compounds, were chosen, and DVB-based copolymetric sorbents including the three monomers were newly synthesized. Among them, the sorbents including GDMA or TMPTMA gave higher recoveries to polar compounds such as uridine and adenine than that including EGDMA. The optimization studies of hydrophilic lipophilic balance, inert diluent and the purity of DVB improved the sorptive abilities of the sorbents. The developed sorbents have higher recoveries for variety of polar compounds (cytosine, uracil, cytidine, uridine, 2'-deoxycytidine, 2'-deoxyguanosine, adenine, thymidine, adenosine and 2'-deoxyadenosine) than commercially available hydrophilic lipophilic balanced type sorbents, while the recoveries for theophylline were comparable between the proposed sorbents and the commercial sorbents.

Ultra performance liquid chromatography-tandem mass spectrometry for the determination of amicarthiazol residues in soil and water samples

A reliable and rapid method has been optimized to determine the residue of amicarthiazol in soil and environmental water samples. After extraction and evaporation, the extraction was carried out with solid phase extraction (SPE) cleanup using HLB cartridge (only soil samples) and for the quantitative determination by ultra performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). The resulting residues of amicarthiazol were analyzed by a gradient separation performed on a UPLC system with a C18 column, methanol and water containing 0.1% (v v(-1)) formic acid as the mobile phase in the mode of electrospray positive ionization (ESI(+)) and multiple reaction monitoring (MRM). Results showed that the recoveries for spiked samples were 74.4-97.1% and 72.1-109.9% for soil and water, respectively, with the relative standard deviation (RSD) less than 10.2% when fortified at 10, 100 and 1000μgL(-1). The limits of detection (LODs) and the limits of quantification (LOQs) for matrix matched standards ranged from 0.073-0.425μgL(-1) and 0.243-1.42μgL(-1). The intra-day precision (n=5) and the inter-day precision over 10 days (n=10) for the amicarthiazol in soils and water samples spiked at 100μgL(-1) was 7.9% and 15.9%, respectively. Results indicated that the developed method could be a helpful tool for the controlling and monitoring of the risks posed by amicarthiazol to human health and environment safety.

Preparation and characterization of polar polymeric adsorbents with high surface area for the removal of phenol from water

Preparation of methyl methacrylate (MMA)/divinylbenzene (DVB) and ethylene glycol dimethacrylate (EGDMA)/DVB copolymers via suspension polymerization yielded precursors which possess residual vinyl groups. Post-crosslinking of appropriate dichloroethane swollen precursors without external crosslinking agent in the presence of anhydrous ferric chloride (FeCl(3)) yielded post-crosslinked resins with high surface area and suitable polarity. FT-IR spectrum indicated that increasing the proportion of MMA or EGDMA in monomer mixtures notably reduces the amount of the pendant vinyl groups onto the matrix of the precursors. Furthermore, the pendant vinyl groups of precursors were almost absent when the content of MMA and EGDMA increased to 40 mol% and 20 mol% in the monomers, respectively. The specific surface areas and pore volumes of copolymers showed a remarkable increase after post-crosslinking. Experimental results showed that isotherms of phenol adsorption onto these polymeric adsorbents could be represented by Freundlich model and Langmuir model reasonably. PDE-5 pc exhibited higher adsorption capacity of phenol than other adsorbents, which resulted from synergistic effect of larger specific surface area and polar groups onto the network. Column adsorption/desorption dynamic curves suggested that PDE-5 pc is a potential candidate for treatment of chemical effluent containing phenol and phenolic pollutants.

Enhanced adsorption of phenol from water by a novel polar post-crosslinked polymeric adsorbent

A novel post-crosslinked polymeric adsorbent PDM-2 was prepared by Friedel-Crafts reaction of pendant vinyl groups without external crosslinking agent. Both the specific surface area and the pore volume of starting copolymer PDM-1 increased significantly after post-crosslinking. Batch adsorption runs of phenol from aqueous solution onto PDM-1 and PDM-2 were investigated. Commercial macroporous resins XAD-4 and AB-8 were chosen as the comparison. Experimental results showed that isotherms of phenol adsorption onto these four polymeric adsorbents could be represented by Freundlich model reasonably. PDM-2 exhibited higher adsorption capacity of phenol than other three adsorbents, which resulted from synergistic effect of larger specific surface area and polar groups on the network. The adsorption process for phenol was proved to be exothermic and spontaneous in nature. Thermodynamic parameters such as Gibb's free energy (DeltaG), change in enthalpy (DeltaH) and change in entropy (DeltaS) were calculated. Kinetics studies indicated that phenol uptake onto PDM-1 and PDM-2 followed the pseudo-second order model and the intraparticle diffusion process was a rate-controlling step. Column adsorption runs demonstrated that nearly 100% regeneration efficiency for PDM-2 by 3BV industrial alcohol and the adsorbate phenol can be easily recovered by further distilling. Continuous column adsorption-regeneration cycles indicated negligible capacity loss of PDM-2 during operation.

Principles, developments and applications of on-line coupling of extraction with chromatography

On-line coupling of extraction and chromatographic separation allows the whole analysis to be performed in a closed system. On-line systems are particularly useful when the analytes are labile, the amount of sample is limited, or very high sensitivity is required. Many on-line systems have been developed both for liquid and for solid samples. This review discusses the different instruments that have been constructed and the factors that need to be considered in the coupling. Selected illustrative applications are described to illustrate the potential of the on-line systems.

New materials in sorptive extraction techniques for polar compounds

This paper provides an overview of the new developments in material and format technology that improve the extraction of polar compounds in several extraction techniques. They mainly include solid-phase extraction, but there are also other sorptive extraction techniques, such as stir bar sorptive extraction and solid-phase microextraction that use either fibers or in-tube devices. We focus on new synthesised materials that are both commercially available and "in-house". Most novel materials that enhance the extraction of polar compounds are hydrophilic and have large specific surface area; however, we also cover other leading technologies, such as sol-gel or monolith. We describe the morphological and chemical properties of these new sorbents so that we can better understand them and relate them to their capability of retaining polar compounds. We discuss the extraction efficiency for polar compounds when these polymers are used as sorptive material and compare them to other materials. We also mention some representative examples of applications.

Comparison of mixed-mode anion-exchange performance ofN-vinylimidazole-divinylbenzene sorbent

A newly synthesized copolymer based on N-vinylimidazole-divinylbenzene (NVIm-DVB) was evaluated as a mixed-mode anion-exchange sorbent for SPE, since the NVIm monomer apart from its hydrophilic properties can be protonated at a certain pH, and then performs as an anion-exchanger. To investigate the behavior of the NVIm-based sorbent, the SPE performance was evaluated under reversed-phase (RP), weak anion-exchange, and strong anion-exchange conditions. The results for the NVIm-DVB sorbent were also compared to commercial reference sorbents from each group: Oasis HLB, Oasis WAX, and Oasis MAX, respectively. SPE results from this evaluation showed that NVIm-DVB can be used as an RP material, compared to Oasis HLB. It also has the potential to act as a strong anion-exchange sorbent, compared to Oasis MAX, since under the proper conditions it was able to fraction and quantitatively recover a group of selected solutes.

Evaluation of a new hypercrosslinked polymer as a sorbent for solid-phase extraction of polar compounds

A new hypercrosslinked polymer (HXLGp) with hydrophilic character due to the presence of hydroxyl moieties has been tested as a sorbent for the solid-phase extraction (SPE) of several polar compounds from water samples. This new sorbent enables the on-line extraction of 300 ml of sample with recoveries higher than 80% for polar compounds such as oxamyl, methomyl or desisopropylatrazine (DIA). The HXLGp has also been compared to other commercially available sorbents such as Oasis HLB (hydrophilic macroporous), to hydrophobic hypercrosslinked resins and to a previously synthesized sorbent based on N-vinylimidazole-divinylbenzene. The results are consistently better with the new synthesized sorbent. The method was successfully applied to the on-line SPE-HPLC of tap and river water samples. The validation with river water samples provided good linearity range and detection limits between 0.03 for methomyl and 4-nitrophenol (4NP) to 0.2 microg l(-1) for phenol (Ph).