Classification of plant associated bacteria using RIF, a computationally derived DNA marker

Xanthomonas Strains Isolated from Hosts in the Family Araceae Reveal Diverse Phylogenetic Relationships and Origins

The family Araceae, comprising ornamentals including Anthurium, Dieffenbachia, Philodendron, Colocasia, and Zantedeschia, is susceptible to Xanthomonas pathogens. Previous analyses have established heterogeneity in aroid strains, yet unresolved taxonomic positions and dynamics between Xanthomonas and frequently associated Stenotrophomonas in aroids necessitate in-depth genetic investigation to resolve these complex relationships. This study utilized multilocus sequence analysis of housekeeping genes atpD, dnaA, dnaK, gltA, and gyrB to investigate 59 aroid strains, selected based on hosts, time, and geographical origins. After adding sequences from additional strains from NCBI GenBank, analysis of 161 concatenated sequences indicated that all aroid strains fell within Xanthomonas and Stenotrophomonas. Thirty-six strains isolated from Anthurium grouped under X. phaseoli, with outliers including one strain each in X. arboricola and X. sacchari and two in Stenotrophomonas. Six strains from Caladium, Dieffenbachia, and Philodendron formed host-specific subgroups within X. euvesicatoria. One strain from Dieffenbachia aligned with X. campestris, whereas strains from Colocasia, Aglaonema, and Spathiphyllum clustered with X. sacchari. Apart from the zantedeschia strain described as X. arboricola pv. zantedeschiae, two colocasia, one epipremnum, and one anthurium strain joined the X. arboricola group. Overall, this study revealed significant heterogeneity among aroid strains, with anthurium strains clustering closely despite distant geographical origins. The analysis underscores the complexity of host-pathogen specificity within Xanthomonas and emphasizes the need for further taxonomic clarification through whole-genome analysis of representative strains. The findings of this research will facilitate strain selection for inclusivity and exclusivity panels in developing diagnostic assays for X. phaseoli and xanthomonads affecting aroids.

First Report of Pectobacterium brasiliense Causing Bacterial Blackleg and Soft Rot of Potato in Pennsylvania

Potato (Solanum tuberosum) plants showing blackleg and soft rot symptoms were collected at a commercial vegetable farm near Newmanstown, PA in August 2021 (Fig. S1). The incidence of potato blackleg in the unirrigated field was about 5 to 8%, but approximately 30% in the irrigated field. The diseased stems were cut into 5 cm and surface disinfected. The stem segments were placed into a 50-mL tube containing 15 mL of sterile water for 15 min for bacterial release. The bacterial suspension was streaked on crystal violet polypectate (CVP) (Hélias et al. 2012) plates and incubated at 28°C for 48 h. Three single colonies produced pits on CVP were picked and purified. Genomic DNA of all three isolates were extracted using the FastDNA Spin Kit (MP Biomedicals, Santa Ana, CA). Polymerase chain reaction (PCR) was performed using all three extracted DNAs as a template with the primer pairs gapA 7F/938R (Cigna et al. 2017), recA F/R (Waleron et al. 2001), dnaA F/R (Schneider et al. 2011) and dnaX F/R (Sławiak et al. 2009) targeting the gapA, recA, dnaA and dnaX genes, respectively. Isolate 21PA01 was further studied as a representative isolate. PCR amplicons derived from both forward and reverse primers were sequenced and analyzed using the BLAST algorithm against the NCBI database (https://www.ncbi.nlm.nih.gov). The regions of gapA (GenBank accession No. ON989738), recA (ON989739), dnaA (OP121183), and dnaX (OP121184) had 99.86%, 100%, 98.88%, and 100% identities with Pectobacterium brasiliense strains S1.16.01.3M (MN167062.1), BL-2 (MW721598.1), IPO:4132 (CP059956.1), and BL-2 (MW721603.1), respectively. A phylogenetic maximum-likelihood tree of the concatenated genes with the length of 2551 bp was constructed to visualize the relationship among different species of Dickeya and Pectobacterium. As a result, 21PA01 was in a single monophyletic cluster with other Pectobacterium brasiliense reference strains (Fig. S2 C). To confirm the pathogen, Koch's postulates were performed. Seed pieces of potato 'Lamoka' were planted in potting mix in one-gallon plastic pots in a greenhouse. Three weeks after emergence, the stems of three plants were each injected with 10 µL of bacteria suspension of either 21PA01 at 107 CFU/mL, P. parmentieri ME175 in tryptic soy broth (TSB) at 107 CFU/mL or TSB at 2 cm above the soil line. Seven days after inoculation, stems inoculated with 21PA01 and ME175 showed black and rotten symptoms, whereas the TSB-injected control plants remained symptomless. In addition, 'Lamoka' tubers were inoculated by placing 10 µL 21PA01 and ME175 suspensions at 107 CFU/mL, and TSB in a 1-cm-deep hole poked in a tuber separately and then sealed with petroleum gel, followed by incubation in a moist chamber at 22 °C for 4 d. The 21PA01 and ME175 inoculated tubers showed soft rot symptoms, but the TSB treatment had no symptoms. Bacterial colonies were isolated from the infected stems and confirmed by the DNA sequences as described above. PCR result was negative on control plant samples. Both stem and tuber inoculation trials were repeated two times, and the results were consistent. Thus, 21PA01 was identified as Pectobacterium brasiliense. To our knowledge, this is the first report of P. brasiliense infecting potatoes in Pennsylvania, USA, although it has been reported somewhere else (van der Merwe et al. 2010, Zhao et al. 2018). This could be a new species in Northeastern US.

DNA barcoding, an effective tool for species identification: a review

DNA barcoding is a powerful taxonomic tool to identify and discover species. DNA barcoding utilizes one or more standardized short DNA regions for taxon identification. With the emergence of new sequencing techniques, such as Next-generation sequencing (NGS), ONT MinION nanopore sequencing, and Pac Bio sequencing, DNA barcoding has become more accurate, fast, and reliable. Rapid species identification by DNA barcodes has been used in a variety of fields, including forensic science, control of the food supply chain, and disease understanding. The Consortium for Barcode of Life (CBOL) presents various working groups to identify the universal barcode gene, such as COI in metazoans; rbcL, matK, and ITS in plants; ITS in fungi; 16S rRNA gene in bacteria and archaea, and creating a reference DNA barcode library. In this article, an attempt has been made to analyze the various proposed DNA barcode for different organisms, strengths & limitations, recent advancements in DNA barcoding, and methods to speed up the DNA barcode reference library construction. This study concludes that constructing a reference library with high species coverage would be a major step toward identifying species by DNA barcodes. This can be achieved in a short period of time by using advanced sequencing and data analysis methods.

Pragmatic Applications and Universality of DNA Barcoding for Substantial Organisms at Species Level: A Review to Explore a Way Forward

DNA barcodes are regarded as hereditary succession codes that serve as a recognition marker to address several queries relating to the identification, classification, community ecology, and evolution of certain functional traits in organisms. The mitochondrial cytochrome c oxidase 1 (CO1) gene as a DNA barcode is highly efficient for discriminating vertebrate and invertebrate animal species. Similarly, different specific markers are used for other organisms, including ribulose bisphosphate carboxylase (rbcL), maturase kinase (matK), transfer RNA-H and photosystem II D1-ApbsArabidopsis thaliana (trnH-psbA), and internal transcribed spacer (ITS) for plant species; 16S ribosomal RNA (16S rRNA), elongation factor Tu gene (Tuf gene), and chaperonin for bacterial strains; and nuclear ITS for fungal strains. Nevertheless, the taxon coverage of reference sequences is far from complete for genus or species-level identification. Applying the next-generation sequencing approach to the parallel acquisition of DNA barcode sequences could greatly expand the potential for library preparation or accurate identification in biodiversity research. Overall, this review articulates on the DNA barcoding technology as applied to different organisms, its universality, applicability, and innovative approach to handling DNA-based species identification.

Description of Clavibacter zhangzhiyongii sp. nov., a phytopathogenic actinobacterium isolated from barley seeds, causing leaf brown spot and decline

Clavibacter michiganensis is a Gram-stain-positive bacterium with eight subspecies, five of which have been redefined as different species on the basis of their genome sequence data. On the basis of the results of phylogenetic analysis of dnaA gene sequences, strains of members of the genus Clavibacter isolated from barley have been grouped in a separate clade from other species and subspecies of the genus Clavibacter. In this study, the biochemical, physiological, fatty acids and genetic characteristics of strains DM1T and DM3, which represented the barley isolates, were examined. On the basis of results from multi-locus sequence typing and other biochemical and physiological features, including colony colour, carbon source utilisation and enzyme activities, DM1T and DM3 are categorically differentiated from the aforementioned eight species and subspecies of the genus Clavibacter. Moreover, the results of genomic analysis reveal that the DNA G+C contents of DM1T and DM3 are 73.7 and 73.5 %, respectively, and the average nucleotide identity (ANI) values between DM1T and DM3 and other species and subspecies range from 90.4 to 92.0 %. The ANI value between DM1T and DM3 is 98.0 %. These results indicate that DM1T and DM3 are distinct from other known species and subspecies of the genus Clavibacter. Therefore, we propose a novel species, C. zhangzhiyongii, with DM1T (=CFCC 16553 T=LMG 31970T) as the type strain.

DNA barcoding of phytopathogens for disease diagnostics and bio-surveillance

DNA barcoding has proven to be a versatile tool for plant disease diagnostics in the genomics era. As the mass parallel and next generation sequencing techniques gained importance, the role of specific barcodes came under immense scrutiny. Identification and accurate classification of phytopathogens need a universal approach which has been the main application area of the concept of barcode. The present review entails a detailed description of the present status of barcode application in plant disease diagnostics. A case study on the application of Internal Transcribed Spacer (ITS) as barcode for Aspergillus and Fusarium spp. sheds light on the requirement of other potential candidates as barcodes for accurate identification. The challenges faced while barcoding novel pathogens have also been discussed with a comprehensive outline of integrating more recent technologies like meta-barcoding and genome skimming for detecting plant pathogens.

Phylogenetic Analyses of Xanthomonads Causing Bacterial Leaf Spot of Tomato and Pepper: Xanthomonas euvesicatoria Revealed Homologous Populations Despite Distant Geographical Distribution

Bacterial leaf spot of tomato and pepper (BLS), an economically important bacterial disease caused by four species of Xanthomonas (X. euvesicatoria (Xe), X. vesicatoria (Xv), X. gardneri (Xg), and X. perforans (Xp)), is a global problem and can cause over 50% crop loss under unfavorable conditions. Among the four species, Xe and Xv are prevalent worldwide. Characterization of the pathogens is crucial for disease management and regulatory purposes. In this study, we performed a multilocus sequence analysis (MLSA) with six genes (hrcN, dnaA gyrB, gapA, pdg, and hmbs) on BLS strains. Other Xanthomonas species were included to determine phylogenetic relationships within and among the tested strains. Four BLS species comprising 76 strains from different serological groups and diverse geographical locations were resolved into three major clades. BLS xanthomonads formed distinct clusters in the phylogenetic analyses. Three other xanthomonads, including X. albilineans, X. sacchari, and X. translucens pv. undolusa revealed less than 85%, 88%, and 89% average nucleotide identity (ANI), respectively, with the other species of Xanthomonas included in this study. Both antibody and MLSA data showed that Xv was clearly separated from Xe and that the latter strains were remarkably clonal, even though they originated from distant geographical locations. The Xe strains formed two separate phylogenetic groups; Xe group A1 consisted only of tomato strains, whereas Xe group A2 included strains from pepper and tomato. In contrast, the Xv group showed greater heterogeneity. Some Xv strains from South America were closely related to strains from California, while others grouped closer to a strain from Indiana and more distantly to a strain from Hawaii. Using this information molecular tests can now be devised to track distribution of clonal populations that may be introduced into new geographic areas through seeds and other infected plant materials.

Development of a robust, field-deployable loop-mediated isothermal amplification (LAMP) assay for specific detection of potato pathogen Dickeya dianthicola targeting a unique genomic region

Destructive maceration, a wide host range, and longevity in non-plant substrates has established Dickeya dianthicola (blackleg of potato) as a significant threat to potato industries worldwide. To protect these businesses, a specific and sensitive point-of-care D. dianthicola detection tool is necessary. We have developed a loop-mediated isothermal amplification (LAMP) assay for specific, sensitive, and rapid detection of D. dianthicola, which can be streamlined for point-of-care use. The developed LAMP assay targets a unique gene, alcohol dehydrogenase, of D. dianthicola. Assay specificity was assessed using strains present in inclusivity (16 D. dianthicola strains) and exclusivity panels (56 closely related, potato pathogenic, and other bacterial strains). Amplification with strains of inclusivity panel occurred, and cross-reactivity with non-target DNA was not observed. The limit of detection (LOD) was 10 CFU/ml when dilutions were made before isolating the genomic DNA; however, LOD was determined as 1 pg using 10-fold serially diluted D. dianthicola genomic DNA. Similar LOD of 1 pg was observed when serially diluted target genomic DNA was mixed with host genomic DNA. LOD (1 pg) was also calculated with 10-fold serially diluted synthetic DNA fragments containing primer target sites. Naturally and artificially inoculated plant samples were used for field adaptability tests with the field-deployable Optigene Plant Material Lysis Kit and a heat block (65°C); the results were obtained within 20 minutes. Despite the lack of method precision, no false positives or false negatives were observed. Therefore, with prepared reactions and a steady heat source, this assay can be used for rapid point-of-care detection, which is imperative for quarantine, eradication, disease management, and border protection.

Genome-informed diagnostics for specific and rapid detection of Pectobacterium species using recombinase polymerase amplification coupled with a lateral flow device

Pectobacterium species cause serious bacterial soft rot diseases worldwide on economically important fruit and vegetable crops including tomato and potato. Accurate and simple methods are essential for rapid pathogen identification and timely management of the diseases. Recombinase polymerase amplification (RPA) combined with a lateral flow device (LFD) was developed for specific detection of Pectobacterium sp. directly from infected plant materials with no need for DNA isolation. The specificity of RPA-LFD was tested with 26 Pectobacterium sp. strains and 12 non-Pectobacterium species and no false positive or false negative outcomes were observed. RPA primers and probe for host control were also developed to detect the host genome for enhanced reliability and accuracy of the developed assay. The detection limit of 10 fg was obtained with both sensitivity and spiked sensitivity assays. No inhibitory effects were observed on the RPA assay when targets (pathogen and host) were directly detected from infected potato and tomato sap. The developed RPA assay has numerous applications from routine diagnostics at point-of-care, biosecurity, surveillance and disease management to epidemiological studies. In addition, this tool can also be used to discover reservoir hosts for Pectobacterium species.

Development of a Loop-Mediated Isothermal Amplification Assay for the Detection of Dickeya spp

Dickeya and Pectobacterium spp. are responsible for soft-rotting diseases of several plant species, some with overlapping host range. On potato, symptoms caused by these pathogens cannot be clearly differentiated. Disease results in the downgrading and rejection of potato seed, thus requiring additional phytosanitary restrictions across Northern Europe and other parts of the world. In an effort to provide a more timely and accurate diagnostic to distinguish these two groups of pathogens, a method for detecting Dickeya spp. using loop-mediated isothermal amplification (LAMP) was developed. The LAMP assay can be used to test crude extracts prepared directly from symptomatic lesions. The entire test can be completed in less than 30 min, making it faster than the current diagnostic standard, the pelADE conventional polymerase chain reaction. Additionally, the LAMP assay was able to detect Dickeya DNA in samples spiked with varying amounts of Pectobacterium DNA, thus demonstrating the highly specific and sensitive nature of the assay, which can be applied on survey samples with mixed soft-rotting bacterial populations.

Detection of Goss's Wilt Pathogen Clavibacter michiganensis subsp. nebraskensis in Maize by Loop-Mediated Amplification

The Goss's wilt pathogen, Clavibacter michiganensis subsp. nebraskensis, can cause considerable losses in maize (Zea mays) production. Diagnosis of Goss's wilt currently is based on symptomology and identification of C. michiganensis subsp. nebraskensis, following isolation on a semiselective medium and/or serological testing. In an effort to provide a more efficient identification method, a loop-mediated amplification (LAMP) assay was developed to detect the tripartite ATP-independent periplasmic (TRAP)-type C4-dicarboxylate transport system large permease component and tested using strains of C. michiganensis subsp. nebraskensis, all other C. michiganensis subspecies and several genera of nontarget bacteria. Only strains of C. michiganensis subsp. nebraskensis reacted positively with the LAMP assay. The LAMP assay was then used to identify bacterial isolates from diseased maize. 16S rDNA and dnaA sequence analyses were used to confirm the identity of the maize isolates and validate assay specificity. The Cmm ImmunoStrip assay was included as a presumptive identification test of C. michiganensis subsp. nebraskensis at the species level. The Cmn-LAMP assay was further tested using symptomatic leaf tissue. The Cmn-LAMP assay was run in a hand-held real-time monitoring device (SMART-DART) and performed equally to in-lab quantitative polymerase chain reaction equipment. The Cmn-LAMP assay accurately identified C. michiganensis subsp. nebraskensis and has potential as a field test. The targeted sequence also has potential application in other molecular detection platforms.

A computer program for fast and easy typing of a partial endoglucanase gene sequence into genospecies and sequevars 1&2 of the Ralstonia solanacearum species complex

The phytopathogen Ralstonia solanacearum is a species complex that contains race 3 biovar 2 strains belonging to phylotype IIB sequevars 1 and 2 that are quarantined or select agent pathogens. Recently, the R. solanacearum species complex strains have been reclassified into three genospecies: R. solanacearum, Ralstonia pseudosolanacearum and Ralstonia syzygii. An unidentified R. solanacearum strain is considered a select agent in the US until proven to be a non-race 3 biovar 2 (non-phylotype IIB sequevars 1&2). Currently, sequevars of R. solanacearum species complex strains can only be determined by phylogenetic analysis of a partial endoglucanase (egl) sequence of approximately 700-bp in length. Such analysis, however, requires expert knowledge to properly trim the sequence, to include the correct reference strains, and to interpret the results. By comparing GenBank egl sequences of representative R. solanacearum species-complex strains, we identified genospecies- and sequevar 1 and 2-specific single nucleotide polymorphisms (SNPs). We also designed primers to amplify a shorter, 526-bp, egl fragment from R. solanacearum species complex strains for easy sequencing of the amplicon, and to facilitate direct and specific amplification of egl from R. solanacearum-infected plant samples without the need of bacterial isolation. We wrote a computer program (Ralstonia solanacearum typing program) that analyzes a minimum 400-bp user-input egl sequence from a R. solanacearum strain for egl homology and SNP content to determine 1) whether it belongs to the R. solanacearum species complex, 2) if so, to which genospecies, and 3) whether it is of the sequevar type (sequevars 1 and 2) associated with the select agent/quarantined R. solanacearum strain. The program correctly typed all 371 tested egl sequences with known sequevars, obtained either from GenBank or through personal communication. Additionally, the program successfully typed 25 R. solanacearum strains in our collection with no prior sequevar information, as well as 4 strains in infected plant samples, using their partial egl sequences amplified and sequenced with primers designed in this study. The Ralstonia solanacearum typing program does not require expertise or specific knowledge to use, gives results in seconds, and provides data interpretation for the user. The program and primers can help expert or non-expert users to quickly type an unknown R. solanacearum species-complex strain and determine whether it is a highly regulated R. solanacearum strain. The program can also serve as a confirmation method, since it is the only method that can easily and directly determine whether the strain in question is a sequevar 1 or 2 strain of R. solanacearum.

Characterizing the Genetic Diversity of the Clavibacter michiganensis subsp. michiganensis Population in New York

New York Clavibacter michiganensis subsp. michiganensis isolates, collected from disparate bacterial canker of tomato outbreaks over the past 11 years, were characterized with a multilocus sequence analysis (MLSA) scheme that differentiated the 51 isolates into 21 haplotypes with a discriminatory power of 0.944. The MLSA scheme consisted of five housekeeping genes (kdpA, sdhA, dnaA, ligA, and gyrB) and three putative pathogenicity genes (celA, tomA, and nagA). Repetitive polymerase chain reaction (PCR), with the BOX-A1R primer, confirmed the high diversity of C. michiganensis subsp. michiganensis isolates in New York by demonstrating that all six PCR patterns (A, B, 13C, 65C, 81C, and D) were present, with PCR patterns C and A being the most common. The MLSA scheme provided higher resolving power than the current repetitive-PCR approach. The plasmid profiles of New York isolates were diverse and differed from reference strain NCPPB382. PCR analysis indicated that the presence of putative pathogenicity genes varied between isolates and highlighted the ephemeral nature of pathogenicity genes in field populations of C. michiganensis subsp. michiganensis. Analysis of molecular variance between Serbian and New York C. michiganensis subsp. michiganensis isolates demonstrated that the two populations were not significantly different, with 98% genetic variation within each population and only 2% genetic variation between populations.

Seed-associated subspecies of the genus Clavibacter are clearly distinguishable from Clavibacter michiganensis subsp. michiganensis

The genus Clavibacter contains one recognized species, Clavibacter michiganensis. Clavibacter michiganensis is subdivided into subspecies based on host specificity and bacteriological characteristics, with Clavibacter michiganensis subsp. michiganensis causing bacterial canker of tomato. Clavibacter michiganensis subsp. michiganensis is often spread through contaminated seed leading to outbreaks of bacterial canker in tomato production areas worldwide. The frequent occurrence of non-pathogenic Clavibacter michiganensis subsp. michiganensis-like bacteria (CMB) is a concern for seed producers because Clavibacter michiganensis subsp. michiganensis is a quarantine organism and detection of a non-pathogenic variant may result in destruction of an otherwise healthy seed lot. A thorough biological and genetic characterization of these seed-associated CMB strains was performed using standard biochemical tests, cell wall analyses, metabolic profiling using Biolog, and single-gene and multilocus sequence analyses. Combined, these tests revealed two distinct populations of seed-associated members of the genus Clavibacter that differed from each other, as well as from all other described subspecies of Clavibacter michiganensis. DNA-DNA hybridization values are 70 % or higher, justifying placement into the single recognized species, C. michiganensis, but other analyses justify separate subspecies designations. Additionally, strains belonging to the genus Clavibacter isolated from pepper also represent a distinct population and warrant separate subspecies designation. On the basis of these data we propose subspecies designations for separate non-pathogenic subpopulations of Clavibacter michiganensis: Clavibacter michiganensis subsp. californiensis subsp. nov. and Clavibacter michiganensis subsp. chilensis subsp. nov. for seed-associated strains represented by C55(T) ( = ATCC BAA-2691(T) = CFBP 8216(T)) and ZUM3936(T) ( = ATCC BAA-2690(T) = CFBP 8217(T)), respectively. Recognition of separate subspecies is essential for improved international seed testing operations.

DNA Barcoding on Bacteria: A Review

Bacteria are omnipotent and they can be found everywhere. The study of bacterial pathogens has been happening from olden days to prevent epidemics, food spoilage, losses in agricultural production, and loss of lives. Modern techniques in DNA based species identification are considered. So, there is a need to acquire simple and quick identification technique. Hence, this review article covers the efficacy of DNA barcoding of bacteria. Routine DNA barcoding involves the production of PCR amplicons from particular regions to sequence them and these sequence data are used to identify or “barcode” that organism to make a distinction from other species.

Phylogeny and classification of Dickeya based on multilocus sequence analysis

Bacterial heart rot of pineapple reported in Hawaii in 2003 and reoccurring in 2006 was caused by an undetermined species of Dickeya. Classification of the bacterial strains isolated from infected pineapple to one of the recognized Dickeya species and their phylogenetic relationships with Dickeya were determined by a multilocus sequence analysis (MLSA), based on the partial gene sequences of dnaA, dnaJ, dnaX, gyrB and recN. Individual and concatenated gene phylogenies revealed that the strains form a clade with reference Dickeya sp. isolated from pineapple in Malaysia and are closely related to D. zeae; however, previous DNA-DNA reassociation values suggest that these strains do not meet the genomic threshold for consideration in D. zeae, and require further taxonomic analysis. An analysis of the markers used in this MLSA determined that recN was the best overall marker for resolution of species within Dickeya. Differential intraspecies resolution was observed with the other markers, suggesting that marker selection is important for defining relationships within a clade. Phylogenies produced with gene sequences from the sequenced genomes of strains D. dadantii Ech586, D. dadantii Ech703 and D. zeae Ech1591 did not place the sequenced strains with members of other well-characterized members of their respective species. The average nucleotide identity (ANI) and tetranucleotide frequencies determined for the sequenced strains corroborated the results of the MLSA that D. dadantii Ech586 and D. dadantii Ech703 should be reclassified as Dickeya zeae Ech586 and Dickeya paradisiaca Ech703, respectively, whereas D. zeae Ech1591 should be reclassified as Dickeya chrysanthemi Ech1591.

Loop-mediated amplification of the Clavibacter michiganensis subsp. michiganensis micA gene is highly specific

Loop-mediated amplification (LAMP) was used to specifically identify Clavibacter michiganensis subsp. michiganensis, causal agent of bacterial canker of tomato. LAMP primers were developed to detect micA, a chromosomally stable gene that encodes a type II lantibiotic, michiganin A, which inhibits growth of other C. michiganensis subspecies. In all, 409 bacterial strains (351 C. michiganensis subsp. michiganensis and 58 non-C. michiganensis subsp. michiganensis) from a worldwide collection were tested with LAMP to determine its specificity. LAMP results were compared with genetic profiles established using polymerase chain reaction (PCR) amplification of seven genes (dnaA, ppaJ, pat-1, chpC, tomA, ppaA, and ppaC). C. michiganensis subsp. michiganensis strains produced eight distinct profiles. The LAMP reaction identified all C. michiganensis subsp. michiganensis strains and discriminated them from other C. michiganensis subspecies and non-Clavibacter bacteria. LAMP has advantages over immunodiagnostic and other molecular detection methods because of its specificity and isothermal nature, which allows for easy field application. The LAMP reaction is also not affected by as many inhibitors as PCR. This diagnostic tool has potential to provide an easy, one-step test for rapid identification of C. michiganensis subsp. michiganensis.

Multilocus variable-number-tandem-repeats analysis (MLVA) distinguishes a clonal complex of Clavibacter michiganensis subsp. michiganensis strains isolated from recent outbreaks of bacterial wilt and canker in Belgium

BACKGROUND

Clavibacter michiganensis subsp. michiganensis (Cmm) causes bacterial wilt and canker in tomato. Cmm is present nearly in all European countries. During the last three years several local outbreaks were detected in Belgium. The lack of a convenient high-resolution strain-typing method has hampered the study of the routes of transmission of Cmm and epidemiology in tomato cultivation. In this study the genetic relatedness among a worldwide collection of Cmm strains and their relatives was approached by gyrB and dnaA gene sequencing. Further, we developed and applied a multilocus variable number of tandem repeats analysis (MLVA) scheme to discriminate among Cmm strains.

RESULTS

A phylogenetic analysis of gyrB and dnaA gene sequences of 56 Cmm strains demonstrated that Belgian Cmm strains from recent outbreaks of 2010-2012 form a genetically uniform group within the Cmm clade, and Cmm is phylogenetically distinct from other Clavibacter subspecies and from non-pathogenic Clavibacter-like strains. MLVA conducted with eight minisatellite loci detected 25 haplotypes within Cmm. All strains from Belgian outbreaks, isolated between 2010 and 2012, together with two French strains from 2010 seem to form one monomorphic group. Regardless of the isolation year, location or tomato cultivar, Belgian strains from recent outbreaks belonged to the same haplotype. On the contrary, strains from diverse geographical locations or isolated over longer periods of time formed mostly singletons.

CONCLUSIONS

We hypothesise that the introduction might have originated from one lot of seeds or contaminated tomato seedlings that was the source of the outbreak in 2010 and that these Cmm strains persisted and induced infection in 2011 and 2012. Our results demonstrate that MLVA is a promising typing technique for a local surveillance and outbreaks investigation in epidemiological studies of Cmm.