Matrix production and organization by endothelial colony forming cells in mechanically strained engineered tissue constructs

Healthy and diseased in vitro models of vascular systems

Irregular hemodynamics affects the progression of various vascular diseases, such atherosclerosis or aneurysms. Despite the extensive hemodynamics studies on animal models, the inter-species differences between humans and animals hamper the translation of such findings. Recent advances in vascular tissue engineering and the suitability of in vitro models for interim analysis have increased the use of in vitro human vascular tissue models. Although the effect of flow on endothelial cell (EC) pathophysiology and EC-flow interactions have been vastly studied in two-dimensional systems, they cannot be used to understand the effect of other micro- and macro-environmental parameters associated with vessel wall diseases. To generate an ideal in vitro model of the vascular system, essential criteria should be included: 1) the presence of smooth muscle cells or perivascular cells underneath an EC monolayer, 2) an elastic mechanical response of tissue to pulsatile flow pressure, 3) flow conditions that accurately mimic the hemodynamics of diseases, and 4) geometrical features required for pathophysiological flow. In this paper, we review currently available in vitro models that include flow dynamics and discuss studies that have tried to address the criteria mentioned above. Finally, we critically review in vitro fluidic models of atherosclerosis, aneurysm, and thrombosis.

A Pulsatile Flow System to Engineer Aneurysm and Atherosclerosis Mimetic Extracellular Matrix

Alterations of blood flow patterns strongly correlate with arterial wall diseases such as atherosclerosis and aneurysm. Here, a simple, pumpless, close-loop, easy-to-replicate, and miniaturized flow device is introduced to concurrently expose 3D engineered vascular smooth muscle tissues to high-velocity pulsatile flow versus low-velocity disturbed flow conditions. Two flow regimes are distinguished, one that promotes elastin and impairs collagen I assembly, while the other impairs elastin and promotes collagen assembly. This latter extracellular matrix (ECM) composition shares characteristics with aneurysmal or atherosclerotic tissue phenotypes, thus recapitulating crucial hallmarks of flow-induced tissue morphogenesis in vessel walls. It is shown that the mRNA levels of ECM of collagens and elastin are not affected by the differential flow conditions. Instead, the differential gene expression of matrix metalloproteinase (MMP) and their inhibitors (TIMPs) is flow-dependent, and thus drives the alterations in ECM composition. In further support, treatment with doxycycline, an MMP inhibitor and a clinically used drug to treat vascular diseases, halts the effect of low-velocity flow on the ECM remodeling. This illustrates how the platform can be exploited for drug efficacy studies by providing crucial mechanistic insights into how different therapeutic interventions may affect tissue growth and ECM assembly.

Layer-specific cell differentiation in bi-layered vascular grafts under flow perfusion

Bioengineered grafts have the potential to overcome the limitations of autologous and non-resorbable synthetic vessels as vascular substitutes. However, one of the challenges in creating these living grafts is to induce and maintain multiple cell phenotypes with a biomimetic organization. Our biomimetic grafts with heterotypic design hold promises for functional neovessel regeneration by guiding the layered cellular and tissue organization into a native-like structure. In this study, a perfusable two-compartment bioreactor chamber was designed for the further maturation of these vascular grafts, with a compartmentalized exposure of the graft's luminal and outer layer to cell-specific media. We used the system for a co-culture of endothelial colony forming cells and multipotent mesenchymal stromal cells (MSCs) in the vascular grafts, produced by combining electrospinning and melt electrowriting. It was demonstrated that the targeted cell phenotypes (i.e. endothelial cells (ECs) and vascular smooth muscle cells (vSMCs), respectively) could be induced and maintained during flow perfusion. The confluent luminal layer of ECs showed flow responsiveness, as indicated by the upregulation of COX-2, KLF2, and eNOS, as well as through stress fiber remodeling and cell elongation. In the outer layer, the circumferentially oriented, multi-layered structure of MSCs could be successfully differentiated into vSM-like cells using TGFβ, as indicated by the upregulation of αSMA, calponin, collagen IV, and (tropo)elastin, without affecting the endothelial monolayer. The cellular layers inhibited diffusion between the outer and the inner medium reservoirs. This implies tightly sealed cellular layers in the constructs, resulting in truly separated bioreactor compartments, ensuring the exposure of the inner endothelium and the outer smooth muscle-like layer to cell-specific media. In conclusion, using this system, we successfully induced layer-specific cell differentiation with a native-like cell organization. This co-culture system enables the creation of biomimetic neovessels, and as such can be exploited to investigate and improve bioengineered vascular grafts.

Suppression of T cells by mesenchymal and cardiac progenitor cells is partly mediated via extracellular vesicles

Adverse remodeling after myocardial infarction (MI) is strongly influenced by T cells. Stem cell therapy after MI, using mesenchymal stem cells (MSC) or cardiomyocyte progenitor cells (CMPC), improved cardiac function, despite low cell retention and limited differentiation. As MSC secrete many factors affecting T cell proliferation and function, we hypothesized the immune response could be affected as one of the targets of stem cell therapy. Therefore, we studied the immunosuppressive properties of human BM-MSC and CMPC and their extracellular vesicles (EVs) in co-culture with activated T cells. Proliferation of T cells, measured by carboxyfluorescein succinimidyl ester dilution, was significantly reduced in the presence of BM-MSC and CMPC. The inflammatory cytokine panel of the T cells in co-culture, measured by Luminex assay, changed, with strong downregulation of IFN-gamma and TNF-alpha. The effect on proliferation was observed in both direct cell contact and transwell co-culture systems. Transfer of conditioned medium to unrelated T cells abrogated proliferation in these cells. EVs isolated from the conditioned medium of BM-MSC and CMPC prevented T cell proliferation in a dose-dependent fashion. Progenitor cells presence induces up- and downregulation of multiple previously unreported pathways in T cells. In conclusion, both BM-MSC and CMPC have a strong capacity for in vitro immunosuppression. This effect is mediated by paracrine factors, such as extracellular vesicles. Besides proliferation, many additional pathways are influenced by both BM-MSC and CMPC.

Large strain stimulation promotes extracellular matrix production and stiffness in an elastomeric scaffold model

Mechanical conditioning of engineered tissue constructs is widely recognized as one of the most relevant methods to enhance tissue accretion and microstructure, leading to improved mechanical behaviors. The understanding of the underlying mechanisms remains rather limited, restricting the development of in silico models of these phenomena, and the translation of engineered tissues into clinical application. In the present study, we examined the role of large strip-biaxial strains (up to 50%) on ECM synthesis by vascular smooth muscle cells (VSMCs) micro-integrated into electrospun polyester urethane urea (PEUU) constructs over the course of 3 weeks. Experimental results indicated that VSMC biosynthetic behavior was quite sensitive to tissue strain maximum level, and that collagen was the primary ECM component synthesized. Moreover, we found that while a 30% peak strain level achieved maximum ECM synthesis rate, further increases in strain level lead to a reduction in ECM biosynthesis. Subsequent mechanical analysis of the formed collagen fiber network was performed by removing the scaffold mechanical responses using a strain-energy based approach, showing that the denovo collagen also demonstrated mechanical behaviors substantially better than previously obtained with small strain training and comparable to mature collagenous tissues. We conclude that the application of large deformations can play a critical role not only in the quantity of ECM synthesis (i.e. the rate of mass production), but also on the modulation of the stiffness of the newly formed ECM constituents. The improved understanding of the process of growth and development of ECM in these mechano-sensitive cell-scaffold systems will lead to more rational design and manufacturing of engineered tissues operating under highly demanding mechanical environments.

Environmental Influences on Endothelial to Mesenchymal Transition in Developing Implanted Cardiovascular Tissue-Engineered Grafts

Tissue-engineered grafts for cardiovascular structures experience biochemical stimuli and mechanical forces that influence tissue development after implantation such as the immunological response, oxidative stress, hemodynamic shear stress, and mechanical strain. Endothelial cells are a cell source of major interest in vascular tissue engineering because of their ability to form a luminal antithrombotic monolayer. In addition, through their ability to undergo endothelial to mesenchymal transition (EndMT), endothelial cells may yield a cell type capable of increased production and remodeling of the extracellular matrix (ECM). ECM is of major importance to the mechanical function of all cardiovascular structures. Tissue engineering approaches may employ EndMT to recapitulate, in part, the embryonic development of cardiovascular structures. Improved understanding of how the environment of an implanted graft could influence EndMT in endothelial cells may lead to novel tissue engineering strategies. This review presents an overview of biochemical and mechanical stimuli capable of influencing EndMT, discusses the influence of these stimuli as found in the direct environment of cardiovascular grafts, and discusses approaches to employ EndMT in tissue-engineered constructs.

Dental pulp stem cells differentiation into retinal ganglion-like cells in a three dimensional network

The loss of retinal ganglion cells (RGCs) in majority of retinal degenerative diseases is the first seen pathological event. A lot of studies aim to discover suitable cell sources to replace lost and damaged RGCs. Among them dental pulp stem cells (DPSCs) have a great potential of differentiating into neuronal lineages as well as RGCs. Moreover, three-dimensional (3D) networks and its distribution for growing and differentiation of stem cells as much as possible mimic to native tissue holds great potential in retinal tissue engineering. In this study, we isolate DPSCs from rat incisors and validate them with flow cytometry. Briefly, we differentiated cells using DMEM/F12 containing FGF2, Shh and 0.5% FBS into retinal ganglion-like cells (RGLCs) in two conditions; 3D state in biocompatible fibrin hydrogel and two-dimensional (2D) or conventional culture in polystyrene plates. Immuncytochemical and gene expression analysis revealed the expression of Pax6, Atoh7 and BRN3B increased in 3D fibrin culture compared to 2D conventional culture. In combination, these data demonstrate that using 3D networks can resemble near natural tissue properties for effective generating RGCs which used to treat neurodegenerative diseases such as glaucoma.

Colorful protein-based fluorescent probes for collagen imaging

Real-time visualization of collagen is important in studies on tissue formation and remodeling in the research fields of developmental biology and tissue engineering. Our group has previously reported on a fluorescent probe for the specific imaging of collagen in live tissue in situ, consisting of the native collagen binding protein CNA35 labeled with fluorescent dye Oregon Green 488 (CNA35-OG488). The CNA35-OG488 probe has become widely used for collagen imaging. To allow for the use of CNA35-based probes in a broader range of applications, we here present a toolbox of six genetically-encoded collagen probes which are fusions of CNA35 to fluorescent proteins that span the visible spectrum: mTurquoise2, EGFP, mAmetrine, LSSmOrange, tdTomato and mCherry. While CNA35-OG488 requires a chemical conjugation step for labeling with the fluorescent dye, these protein-based probes can be easily produced in high yields by expression in E. coli and purified in one step using Ni2+-affinity chromatography. The probes all bind specifically to collagen, both in vitro and in porcine pericardial tissue. Some first applications of the probes are shown in multicolor imaging of engineered tissue and two-photon imaging of collagen in human skin. The fully-genetic encoding of the new probes makes them easily accessible to all scientists interested in collagen formation and remodeling.