Efficient CO2-reducing activity of NAD-dependent formate dehydrogenase from Thiobacillus sp. KNK65MA for formate production from CO2 gas

From formate oxidation to CO₂ reduction: The role of formate dehydrogenase in sustainable carbon utilization

The escalation of global climate change and environmental degradation has made it imperative to develop innovative strategies to mitigate carbon dioxide (CO₂) emissions and enhance its utilization. Formate dehydrogenase (FDH) is a key enzyme capable of catalyzing the reversible conversion between CO₂ and formate. Due to its critical role in sustainable carbon recycling processes, FDH has garnered significant attention in recent times. This review offers a thorough analysis of FDH, emphasizing its dual function of converting one carbon (C1) substrates and providing reducing power. Recent advancements in utilizing FDH for CO₂ reduction, both in vitro and in vivo, underscoring its potential to facilitate carbon capture and conversion under mild conditions. Additionally, this review discusses the limitations of FDH in C1 metabolism and proposes targeted strategies to address these challenges. Future research should focus on achieving a balance between energy production and carbon assimilation, mediated by FDH activity. Ultimately, this work aims to offer both theoretical insights and practical guidance, advancing microbial engineering for CO₂ reduction and resource recycling, and contributing to the development of sustainable carbon utilization technologies.

Multienzymatic Platform for Coupling a CCU Strategy to Waste Valorization: CO2 from the Iron and Steel Industry and Crude Glycerol from Biodiesel Production

Ongoing climate crisis demands the development of carbon capture and utilization (CCU) technologies that emphasize simplicity, eco-sustainability, and cost-effectiveness. Enzymatic CO2 reduction emerges as an alternative to biotransforming this cheap raw material into high-value products under milder conditions. This work proposes a multienzymatic platform to reduce CO2 to formate by formate dehydrogenase (FDH) and oxidize glycerol to dihydroxyacetone (DHA) by glycerol dehydrogenase (GlyDH), allowing for efficient cofactor regeneration. Through studies such as pH operating range, enzyme stability, FDH/GlyDH ratio, and reaction medium engineering to achieve optimal soluble CO2 concentrations, the reaction with a gas mixture of 24% CO2 yielded 5.7 mM formate and 6 mM DHA after 30 h, achieving a 92.3% CO2 conversion. To evaluate the feasibility under industrially relevant conditions, a synthetic gas mixture mimicking the composition of the iron and steel industry off-gases (24.5% CO2) and crude glycerol (64% v/v) from biodiesel production was tested as substrates. The simultaneous production was successful, yielding 3.1 mM formate and 4.4 mM DHA. Formic acid was subsequently purified using liquid-liquid extraction, employing the green solvent 2-methyltetrahydrofuran (2-MTHF). For the first time to our knowledge, a CCU strategy has been successfully coupled with industrial waste valorization, obtaining two high-value molecules by means of a robust, profitable, and easily manageable multienzymatic system.

Identifying a key spot for electron mediator-interaction to tailor CO dehydrogenase's affinity

Fe‒S cluster-harboring enzymes, such as carbon monoxide dehydrogenases (CODH), employ sophisticated artificial electron mediators like viologens to serve as potent biocatalysts capable of cleaning-up industrial off-gases at stunning reaction rates. Unraveling the interplay between these enzymes and their associated mediators is essential for improving the efficiency of CODHs. Here we show the electron mediator-interaction site on ChCODHs (Ch, Carboxydothermus hydrogenoformans) using a systematic approach that leverages the viologen-reactive characteristics of superficial aromatic residues. By enhancing mediator-interaction (R57G/N59L) near the D-cluster, the strategically tailored variants exhibit a ten-fold increase in ethyl viologen affinity relative to the wild-type without sacrificing the turn-over rate (kcat). Viologen-complexed structures reveal the pivotal positions of surface phenylalanine residues, serving as external conduits for the D-cluster to/from viologen. One variant (R57G/N59L/A559W) can treat a broad spectrum of waste gases (from steel-process and plastic-gasification) containing O2. Decoding mediator interactions will facilitate the development of industrially high-efficient biocatalysts encompassing gas-utilizing enzymes.

Effect of pH on metabolic pathway shift in fermentation and electro-fermentation of xylose by Clostridium autoethanogenum

Clostridium autoethanogenum can to convert waste gases (CO2, CO, H2) and xylose from hydrolyzed biomass into acetate, lactate, formate, ethanol and 2,3-butanediol, being a candidate for the transformation of waste streams of lignocellulosic biorefineries. Electro-fermentation (EF) modify the pattern of traditional fermentations resulting in improved product yields as has been shown when using Clostridium strains. The aim of this work was to evaluate the influence of pH on microbial growth and product distribution during fermentation and EF of xylose by C. autoethanogenum DSM10061. Fermentation and EF were carried out in a H-type reactor at three controlled pH: 5.0, 5.5 and 5.8, and at a fixed potential of -600 mV (versus Ag/AgCl) in the EF. The experiments showed that maximum biomass concentration increased as the pH increased in fermentation and EF. In accordance with maximum biomass reached, the highest substrate conversion was observed at pH 5.8 for both systems, with 76.80 % in fermentation and 96.18 % in EF. Moreover, the highest concentrations of acetic acid (1.41 ± 0.07 g L-1) and ethanol (1.45 ± 0.15 g L-1) were obtained at the end of cultures in the EF at pH 5.8. The production of lactic and formic acid decreased by the application of the external potential regardless of the pH value, reaching the lowest productivity at pH 5.8. In contrast, the specific productivity of acetic acid and ethanol was lower in both fermentation and EF at the lowest pH. Furthermore, the presence of 0.06 g L-1 of 2,3-butanediol was only detected in EF at pH 5.8. The results revealed that EF modulated microbial metabolism, which can be explained by a possible increased generation of NADP+/NADPH cofactors, which would redirect the metabolic pathway to more reduced products.

A high catalytic efficiency and chemotolerant formate dehydrogenase from Bacillus simplex

NAD+ -dependent formate dehydrogenase (FDH) catalyzes the conversion of formate and NAD+ to produce carbon dioxide and NADH. The reaction is biotechnologically important because FDH is widely used for NADH regeneration in various enzymatic syntheses. However, major drawbacks of this versatile enzyme in industrial applications are its low activity, requiring its utilization in large amounts to achieve optimal process conditions. Here, FDH from Bacillus simplex (BsFDH) was characterized for its biochemical and catalytic properties in comparison to FDH from Pseudomonas sp. 101 (PsFDH), a commonly used FDH in various biocatalytic reactions. The data revealed that BsFDH possesses high formate oxidizing activity with a kcat value of 15.3 ± 1.9 s-1 at 25°C compared to 7.7 ± 1.0 s-1 for PsFDH. At the optimum temperature (60°C), BsFDH exhibited 6-fold greater activity than PsFDH. The BsFDH displayed higher pH stability and a superior tolerance toward sodium azide and H2 O2 inactivation, showing a 200-fold higher Ki value for azide inhibition and remaining stable in the presence of 0.5% H2 O2 compared to PsFDH. The application of BsFDH as a cofactor regeneration system for the detoxification of 4-nitrophenol by the reaction of HadA, which produced a H2 O2 byproduct was demonstrated. The biocatalytic cascades using BsFDH demonstrated a distinct superior conversion activity because the system tolerated H2 O2 well. Altogether, the data showed that BsFDH is a robust enzyme suitable for future application in industrial biotechnology.

Insights into Enzyme Reactions with Redox Cofactors in Biological Conversion of CO2

Carbon dioxide (CO2) is the most abundant component of greenhouse gases (GHGs) and directly creates environmental issues such as global warming and climate change. Carbon capture and storage have been proposed mainly to solve the problem of increasing CO2 concentration in the atmosphere; however, more emphasis has recently been placed on its use. Among the many methods of using CO2, one of the key environmentally friendly technologies involves biologically converting CO2 into other organic substances such as biofuels, chemicals, and biomass via various metabolic pathways. Although an efficient biocatalyst for industrial applications has not yet been developed, biological CO2 conversion is the needed direction. To this end, this review briefly summarizes seven known natural CO2 fixation pathways according to carbon number and describes recent studies in which natural CO2 assimilation systems have been applied to heterogeneous in vivo and in vitro systems. In addition, studies on the production of methanol through the reduction of CO2 are introduced. The importance of redox cofactors, which are often overlooked in the CO2 assimilation reaction by enzymes, is presented; methods for their recycling are proposed. Although more research is needed, biological CO2 conversion will play an important role in reducing GHG emissions and producing useful substances in terms of resource cycling.

Structural analysis of wild-type and Val120Thr mutant Candida boidinii formate dehydrogenase by X-ray crystallography

Candida boidinii NAD+-dependent formate dehydrogenase (CbFDH) has gained significant attention for its potential application in the production of biofuels and various industrial chemicals from inorganic carbon dioxide. The present study reports the atomic X-ray crystal structures of wild-type CbFDH at cryogenic and ambient temperatures, as well as that of the Val120Thr mutant at cryogenic temperature, determined at the Turkish Light Source `Turkish DeLight'. The structures reveal new hydrogen bonds between Thr120 and water molecules in the active site of the mutant CbFDH, suggesting increased stability of the active site and more efficient electron transfer during the reaction. Further experimental data is needed to test these hypotheses. Collectively, these findings provide invaluable insights into future protein-engineering efforts that could potentially enhance the efficiency and effectiveness of CbFDH.

Renewable Hydrogen Production and Storage Via Enzymatic Interconversion of CO2 and Formate with Electrochemical Cofactor Regeneration

The urgent need to reduce CO2 emissions has motivated the development of CO2 capture and utilization technologies. An emerging application is CO2 transformation into storage chemicals for clean energy carriers. Formic acid (FA), a valuable product of CO2 reduction, is an excellent hydrogen carrier. CO2 conversion to FA, followed by H2 release from FA, are conventionally chemically catalyzed. Biocatalysts offer a highly specific and less energy-intensive alternative. CO2 conversion to formate is catalyzed by formate dehydrogenase (FDH), which usually requires a cofactor to function. Several FDHs have been incorporated in bioelectrochemical systems where formate is produced by the biocathode and the cofactor is electrochemically regenerated. H2 production from formate is also catalyzed by several microorganisms possessing either formate hydrogenlyase or hydrogen-dependent CO2 reductase complexes. Combination of these two processes can lead to a CO2 -recycling cycle for H2 production, storage, and release with potentially lower environmental impact than conventional methods.

Stable and Reusable Fe3 O4 /ZIF-8 Composite for Encapsulation of FDH Enzyme under Mild Conditions Applicable to CO2 Reduction

The enzymatic reduction of carbon dioxide presents limited applicability due to denaturation and the impossibility of biocatalyst recovery; disadvantages that can be minimized by its immobilization. Here, a recyclable bio-composed system was constructed by in-situ encapsulation under mild conditions using formate dehydrogenase in a ZIF-8 metalorganic framework (MOF) in the presence of magnetite. The partial dissolution of ZIF-8 in the enzyme's operation medium can be relatively inhibited if the concentration of magnetic support used exceeds 10 mg mL-1 . The bio-friendly environment for immobilization does not harm the integrity of the biocatalyst, and the production of formic acid is improved 3.4-fold compared to the free enzyme because the MOFs act as concentrators of the enzymatic cofactor. Furthermore, the bio-composed system retains 86 % of its activity after a long time of five cycles, thus indicating an excellent magnetic recovery and a good reusability.

Direct Biocatalytic Processes for CO2 Capture as a Green Tool to Produce Value-Added Chemicals

Direct biocatalytic processes for CO₂ capture and transformation in value-added chemicals may be considered a useful tool for reducing the concentration of this greenhouse gas in the atmosphere. Among the other enzymes, carbonic anhydrase (CA) and formate dehydrogenase (FDH) are two key biocatalysts suitable for this challenge, facilitating the uptake of carbon dioxide from the atmosphere in complementary ways. Carbonic anhydrases accelerate CO₂ uptake by promoting its solubility in water in the form of hydrogen carbonate as the first step in converting the gas into a species widely used in carbon capture storage and its utilization processes (CCSU), particularly in carbonation and mineralization methods. On the other hand, formate dehydrogenases represent the biocatalytic machinery evolved by certain organisms to convert CO₂ into enriched, reduced, and easily transportable hydrogen species, such as formic acid, via enzymatic cascade systems that obtain energy from chemical species, electrochemical sources, or light. Formic acid is the basis for fixing C₁-carbon species to other, more reduced molecules. In this review, the state-of-the-art of both methods of CO₂ uptake is assessed, highlighting the biotechnological approaches that have been developed using both enzymes.

Trends in Research and Development for CO2 Capture and Sequestration

Technological and medical advances over the past few decades epitomize human capabilities. However, the increased life expectancies and concomitant land-use changes have significantly contributed to the release of ∼830 gigatons of CO₂ into the atmosphere over the last three decades, an amount comparable to the prior two and a half centuries of CO₂ emissions. The United Nations has adopted a pledge to achieve "net zero", i.e., yearly removing as much CO₂ from the atmosphere as the amount emitted due to human activities, by the year 2050. Attaining this goal will require a concerted effort by scientists, policy makers, and industries all around the globe. The development of novel materials on industrial scales to selectively remove CO₂ from mixtures of gases makes it possible to mitigate CO₂ emissions using a multipronged approach. Broadly, the CO₂ present in the atmosphere can be captured using materials and processes for biological, chemical, and geological technologies that can sequester CO₂ while also reducing our dependence on fossil-fuel reserves. In this review, we used the curated literature available in the CAS Content Collection to present a systematic analysis of the various approaches taken by scientists and industrialists to restore carbon balance in the environment. Our analysis highlights the latest trends alongside the associated challenges.

Recent Applications and Strategies to Enhance Performance of Electrochemical Reduction of CO2 Gas into Value-Added Chemicals Catalyzed by Whole-Cell Biocatalysts

Carbon dioxide (CO2) is one of the major greenhouse gases that has been shown to cause global warming. Decreasing CO2 emissions plays an important role to minimize the impact of climate change. The utilization of CO2 gas as a cheap and sustainable source to produce higher value-added chemicals such as formic acid, methanol, methane, and acetic acid has been attracting much attention. The electrochemical reduction of CO2 catalyzed by whole-cell biocatalysts is a promising process for the production of value-added chemicals because it does not require costly enzyme purification steps and the supply of exogenous cofactors such as NADH. This study covered the recent applications of the diversity of microorganisms (pure cultures such as Shewanella oneidensis MR1, Sporomusa species, and Clostridium species and mixed cultures) as whole-cell biocatalysts to produce a wide range of value-added chemicals including methane, carboxylates (e.g., formate, acetate, butyrate, caproate), alcohols (e.g., ethanol, butanol), and bioplastics (e.g., Polyhydroxy butyrate). Remarkably, this study provided insights into the molecular levels of the proteins/enzymes (e.g., formate hydrogenases for CO2 reduction into formate and electron-transporting proteins such as c-type cytochromes) of microorganisms which are involved in the electrochemical reduction of CO2 into value-added chemicals for the suitable application of the microorganism in the chemical reduction of CO2 and enhancing the catalytic efficiency of the microorganisms toward the reaction. Moreover, this study provided some strategies to enhance the performance of the reduction of CO2 to produce value-added chemicals catalyzed by whole-cell biocatalysts.

Paving the way for synthetic C1 - Metabolism in Pseudomonas putida through the reductive glycine pathway

One-carbon (C1) compounds such as methanol, formate, and CO₂ are alternative, sustainable microbial feedstocks for the biobased production of chemicals and fuels. In this study, we engineered the carbon metabolism of the industrially important bacterium Pseudomonas putida to modularly assimilate these three substrates through the reductive glycine pathway. First, we demonstrated the functionality of the C1-assimilation module by coupling the growth of auxotrophic strains to formate assimilation. Next, we extended the module in the auxotrophic strains from formate to methanol-dependent growth using both NAD and PQQ-dependent methanol dehydrogenases. Finally, we demonstrated, for the first time, engineered CO₂-dependent formation of part of the biomass through CO₂ reduction to formate by the native formate dehydrogenase, which required short-term evolution to rebalance the cellular NADH/NAD ⁺ ratio. This research paves the way to further engineer P. putida towards full growth on formate, methanol, and CO₂ as sole feedstocks, thereby substantially expanding its potential as a sustainable and versatile cell factory.

Life in Multi-Extreme Environments: Brines, Osmotic and Hydrostatic Pressure─A Physicochemical View

Elucidating the details of the formation, stability, interactions, and reactivity of biomolecular systems under extreme environmental conditions, including high salt concentrations in brines and high osmotic and high hydrostatic pressures, is of fundamental biological, astrobiological, and biotechnological importance. Bacteria and archaea are able to survive in the deep ocean or subsurface of Earth, where pressures of up to 1 kbar are reached. The deep subsurface of Mars may host high concentrations of ions in brines, such as perchlorates, but we know little about how these conditions and the resulting osmotic stress conditions would affect the habitability of such environments for cellular life. We discuss the combined effects of osmotic (salts, organic cosolvents) and hydrostatic pressures on the structure, stability, and reactivity of biomolecular systems, including membranes, proteins, and nucleic acids. To this end, a variety of biophysical techniques have been applied, including calorimetry, UV/vis, FTIR and fluorescence spectroscopy, and neutron and X-ray scattering, in conjunction with high pressure techniques. Knowledge of these effects is essential to our understanding of life exposed to such harsh conditions, and of the physical limits of life in general. Finally, we discuss strategies that not only help us understand the adaptive mechanisms of organisms that thrive in such harsh geological settings but could also have important ramifications in biotechnological and pharmaceutical applications.

Improving the Enzymatic Cascade of Reactions for the Reduction of CO2 to CH3OH in Water: From Enzymes Immobilization Strategies to Cofactor Regeneration and Cofactor Suppression

The need to decrease the concentration of CO2 in the atmosphere has led to the search for strategies to reuse such molecule as a building block for chemicals and materials or a source of carbon for fuels. The enzymatic cascade of reactions that produce the reduction of CO2 to methanol seems to be a very attractive way of reusing CO2; however, it is still far away from a potential industrial application. In this review, a summary was made of all the advances that have been made in research on such a process, particularly on two salient points: enzyme immobilization and cofactor regeneration. A brief overview of the process is initially given, with a focus on the enzymes and the cofactor, followed by a discussion of all the advances that have been made in research, on the two salient points reported above. In particular, the enzymatic regeneration of NADH is compared to the chemical, electrochemical, and photochemical conversion of NAD+ into NADH. The enzymatic regeneration, while being the most used, has several drawbacks in the cost and life of enzymes that suggest attempting alternative solutions. The reduction in the amount of NADH used (by converting CO2 electrochemically into formate) or even the substitution of NADH with less expensive mimetic molecules is discussed in the text. Such an approach is part of the attempt made to take stock of the situation and identify the points on which work still needs to be conducted to reach an exploitation level of the entire process.

Turtle ants harbor metabolically versatile microbiomes with conserved functions across development and phylogeny

Gut bacterial symbionts can support animal nutrition by facilitating digestion and providing valuable metabolites. However, changes in symbiotic roles between immature and adult stages are not well documented, especially in ants. Here, we explored the metabolic capabilities of microbiomes sampled from herbivorous turtle ant (Cephalotes sp.) larvae and adult workers through (meta)genomic screening and in vitro metabolic assays. We reveal that larval guts harbor bacterial symbionts with impressive metabolic capabilities, including catabolism of plant and fungal recalcitrant dietary fibers and energy-generating fermentation. Additionally, several members of the specialized adult gut microbiome, sampled downstream of an anatomical barrier that dams large food particles, show a conserved potential to depolymerize many dietary fibers. Symbionts from both life stages have the genomic capacity to recycle nitrogen and synthesize amino acids and B-vitamins. With help of their gut symbionts, including several bacteria likely acquired from the environment, turtle ant larvae may aid colony digestion and contribute to colony-wide nitrogen, B-vitamin and energy budgets. In addition, the conserved nature of the digestive capacities among adult-associated symbionts suggests that nutritional ecology of turtle ant colonies has long been shaped by specialized, behaviorally-transferred gut bacteria with over 45 million years of residency.

Formate Dehydrogenase Improves the Resistance to Formic Acid and Acetic Acid Simultaneously in Saccharomyces cerevisiae

Bioethanol from lignocellulosic biomass is a promising and sustainable strategy to meet the energy demand and to be carbon neutral. Nevertheless, the damage of lignocellulose-derived inhibitors to microorganisms is still the main bottleneck. Developing robust strains is critical for lignocellulosic ethanol production. An evolved strain with a stronger tolerance to formate and acetate was obtained after adaptive laboratory evolution (ALE) in the formate. Transcriptional analysis was conducted to reveal the possible resistance mechanisms to weak acids, and fdh coding for formate dehydrogenase was selected as the target to verify whether it was related to resistance enhancement in Saccharomyces cerevisiae F3. Engineered S. cerevisiae FA with fdh overexpression exhibited boosted tolerance to both formate and acetate, but the resistance mechanism to formate and acetate was different. When formate exists, it breaks down by formate dehydrogenase into carbon dioxide (CO₂) to relieve its inhibition. When there was acetate without formate, FDH1 converted CO₂ from glucose fermentation to formate and ATP and enhanced cell viability. Together, fdh overexpression alone can improve the tolerance to both formate and acetate with a higher cell viability and ATP, which provides a novel strategy for robustness strain construction to produce lignocellulosic ethanol.

Newly explored formate dehydrogenases from Clostridium species catalyze carbon dioxide to formate

With concerns over global warming and climate change, many efforts have been devoted to mitigate atmospheric CO₂ level. As a CO₂ utilization strategy, formate dehydrogenase (FDH) from Clostridium species were explored to discover O₂-tolerant and efficient FDHs that can catalyze CO₂ to formate (i.e. CO₂ reductase). With FDH from Clostridium ljungdahlii (ClFDH) that plays as a CO₂ reductase previously reported as the reference, FDH from C.autoethanogenum (CaFDH), C. coskatii (CcFDH), and C. ragsdalei (CrFDH) were newly discovered via genome-mining. The FDHs were expressed in Escherichia coli and the recombinant FDHs successfully catalyzed CO₂ reduction with a specific activity of 15 U g^-1-CaFDH, 17 U g^-1-CcFDH, and 8.7 U g^-1-CrFDH. Interestingly, all FDHs newly discovered retain their catalytic activity under aerobic condition, although Clostridium species are strict anaerobe. The results discussed herein can contribute to biocatalytic CO₂ utilization.

No competitive inhibition of bicarbonate or carbonate for formate dehydrogenase from Candida boidinii -catalyzed CO2 reduction

Formate dehydrogenase from Candida boidinii (CbFDH) reversibly catalyzes the formate to CO2 with the redox coupling NAD+/NADH. While many studies on CbFDH-catalyzed formate oxidation in the presence of NAD+ are...

CO2 to Methanol: A Highly Efficient Enzyme Cascade

Carbon dioxide (CO₂) has been increasingly regarded not only as a greenhouse gas but also as a valuable feedstock for carbon-based chemicals. In particular, biological approaches have drawn attention as models for the production of value-added products, as CO₂ conversion serves many natural processes. Enzymatic CO₂ reduction in vitro is a very promising route to produce fossil free and bio-based fuel alternatives, such as methanol. In this chapter, the advances in constructing competitive multi-enzymatic systems for the reduction of CO₂ to methanol are discussed. Different integrated methods are presented, aiming to address technological challenges, such as the cost effectiveness, need for material regeneration and reuse and improving product yields of the process.

Carbonic anhydrase/formate dehydrogenase bienzymatic system for CO2 capture, utilization and storage

In order to establish carbon capture, utilization, and storage (CCUS) technology, a system consisting of two different biocatalysts (formate dehydrogenase from Candida boidinii; CbFDH and carbonic anhydrase from bovine erythrocytes; CA) is developed.

Boosting the kinetic efficiency of formate dehydrogenase by combining the effects of temperature, high pressure and co-solvent mixtures

The application of co-solvents and high pressure has been shown to be an efficient means to modify the kinetics of enzyme-catalyzed reactions without compromising enzyme stability, which is often limited by temperature modulation. In this work, the high-pressure stopped-flow methodology was applied in conjunction with fast UV/Vis detection to investigate kinetic parameters of formate dehydrogenase reaction (FDH), which is used in biotechnology for cofactor recycling systems. Complementary FTIR spectroscopic and differential scanning fluorimetric studies were performed to reveal pressure and temperature effects on the structure and stability of the FDH. In neat buffer solution, the kinetic efficiency increases by one order of magnitude by increasing the temperature from 25° to 45 °C and the pressure from ambient up to the kbar range. The addition of particular co-solvents further doubled the kinetic efficiency of the reaction, in particular the compatible osmolyte trimethylamine-N-oxide and its mixtures with the macromolecular crowding agent dextran. The thermodynamic model PC-SAFT was successfully applied within a simplified activity-based Michaelis-Menten framework to predict the effects of co-solvents on the kinetic efficiency by accounting for interactions involving substrate, co-solvent, water, and FDH. Especially mixtures of the co-solvents at high concentrations were beneficial for the kinetic efficiency and for the unfolding temperature.

The challenges of using NAD+-dependent formate dehydrogenases for CO2 conversion

In recent years, CO₂ reduction and utilization have been proposed as an innovative solution for global warming and the ever-growing energy and raw material demands. In contrast to various classical methods, including chemical, electrochemical, and photochemical methods, enzymatic methods offer a green and sustainable option for CO₂ conversion. In addition, enzymatic hydrogenation of CO₂ into platform chemicals could be used to produce economically useful hydrogen storage materials, making it a win-win strategy. The thermodynamic and kinetic stability of the CO₂ molecule makes its utilization a challenging task. However, Nicotine adenine dinucleotide (NAD⁺)-dependent formate dehydrogenases (FDHs), which have high selectivity and specificity, are attractive catalysts to overcome this issue and convert CO₂ into fuels and renewable chemicals. It is necessary to improve the stability, cofactor necessity, and CO₂ conversion efficiency of these enzymes, such as by combining them with appropriate hybrid systems. However, metal-independent, NAD⁺-dependent FDHs, and their CO₂ reduction activity have received limited attention to date. This review outlines the CO₂ reduction ability of these enzymes as well as their properties, reaction mechanisms, immobilization strategies, and integration with electrochemical and photochemical systems for the production of formic acid or formate. The biotechnological applications of FDH, future perspectives, barriers to CO₂ reduction with FDH, and aspects that must be further developed are briefly summarized. We propose that constructing hybrid systems that include NAD⁺-dependent FDHs is a promising approach to convert CO₂ and strengthen the sustainable carbon bio-economy.

Cell-free chemoenzymatic starch synthesis from carbon dioxide

[Figure: see text].

Enzymes, In Vivo Biocatalysis, and Metabolic Engineering for Enabling a Circular Economy and Sustainability

Since the industrial revolution, the rapid growth and development of global industries have depended largely upon the utilization of coal-derived chemicals, and more recently, the utilization of petroleum-based chemicals. These developments have followed a linear economy model (produce, consume, and dispose). As the world is facing a serious threat from the climate change crisis, a more sustainable solution for manufacturing, i.e., circular economy in which waste from the same or different industries can be used as feedstocks or resources for production offers an attractive industrial/business model. In nature, biological systems, i.e., microorganisms routinely use their enzymes and metabolic pathways to convert organic and inorganic wastes to synthesize biochemicals and energy required for their growth. Therefore, an understanding of how selected enzymes convert biobased feedstocks into special (bio)chemicals serves as an important basis from which to build on for applications in biocatalysis, metabolic engineering, and synthetic biology to enable biobased processes that are greener and cleaner for the environment. This review article highlights the current state of knowledge regarding the enzymatic reactions used in converting biobased wastes (lignocellulosic biomass, sugar, phenolic acid, triglyceride, fatty acid, and glycerol) and greenhouse gases (CO₂ and CH₄) into value-added products and discusses the current progress made in their metabolic engineering. The commercial aspects and life cycle assessment of products from enzymatic and metabolic engineering are also discussed. Continued development in the field of metabolic engineering would offer diversified solutions which are sustainable and renewable for manufacturing valuable chemicals.

Enzymes for Efficient CO2 Conversion

The accumulation of carbon dioxide in the atmosphere as a result of human activities has caused a number of adverse circumstances in the world. For this reason, the proposed solutions lie within the aim of reducing carbon dioxide emissions have been quite valuable. However, as the human activity continues to increase on this planet, the possibility of reducing carbon dioxide emissions decreases with the use of conventional methods. The emergence of compounds than can be used in different fields by converting the released carbon dioxide into different chemicals will construct a fundamental solution to the problem. Although electro-catalysis or photolithography methods have emerged for this purpose, they have not been able to achieve successful results. Alternatively, another proposed solution are enzyme based systems. Among the enzyme-based systems, pyruvate decarboxylase, carbonic anhydrase and dehydrogenases have been the most studied enzymes. Pyruvate dehydrogenase and carbonic anhydrase have either been an expensive method or were incapable of producing the desired result due to the reaction cascade they catalyze. However, the studies reporting the production of industrial chemicals from carbon dioxide using dehydrogenases and in particular, the formate dehydrogenase enzyme, have been remarkable. Moreover, reported studies have shown the existence of more active and stable enzymes, especially the dehydrogenase family that can be identified from the biome. In addition to this, their redesign through protein engineering can have an immense contribution to the increased use of enzyme-based methods in CO₂ reduction, resulting in an enormous expansion of the industrial capacity.

Effect of Met/Leu substitutions on the stability of NAD+-dependent formate dehydrogenases from Gossypium hirsutum

NAD⁺-dependent formate dehydrogenases (FDHs) are extensively used in the regeneration of NAD(P)H and the reduction of CO₂ to formate. In addition to their industrial importance, FDHs also play a crucial role in the maintenance of a reducing environment to combat oxidative stress in plants. Therefore, it is important to investigate the response of NAD⁺-dependent FDH against both temperature and H₂O₂, to understand the defense mechanisms, and to increase its stability under oxidative stress conditions. In the present study, we characterized the oxidative and thermal stability of NAD⁺-dependent FDH isolated from cotton, Gossypium hirsutum (GhFDH), by investigating the effect of Met/Leu substitutions in the positions of 225, 234, and 243. Results showed that the single mutant, M234L (0.72 s^-1 mM^-1), and the triple mutant, M225L/M234L/M243L (0.55 s^-1 mM^-1), have higher catalytic efficiency than the native enzyme. Substitution of methionine by leucine on the position of 243 increased the free energy gain by 670 J mol^-1. The most remarkable results in chemical stability were seen for double and triple mutants, cumulatively. Double and triple substitution of Met to Leu (M225L/M243L and M225L/M243L/M234L) reduce the k^ef_in by a factor of 2 (12.3×10^-5 and 12.8×10^-5 s^-1, respectively.Key points• The closer the residue to NAD⁺, in which we substituted methionine to leucine, the lower the stability against H₂O₂ we observed.• The significant gain in the T_m value for the M243L mutant was observed as +5°C.• Residue 234 occupies a critical position for oxidation defense mechanisms. Graphical abstract (a) Methionine amino acids on the protein surface are susceptible to oxidative stress and can be converted to methionine sulfoxide by reactive oxygen derivatives (such as hydrogen peroxide). Therefore, they are critical regions in the change of protein conformation and loss of activity. (b) Replacing the amino acid methionine, which is susceptible to oxidation due to the sulfur group, with the oxidation-resistant leucine amino acid is an important strategy in increasing oxidative stability.

Immobilization of formate dehydrogenase in metal organic frameworks for enhanced conversion of carbon dioxide to formate

Hydrogenation of carbon dioxide (CO₂) to formic acid by the enzyme formate dehydrogenase (FDH) is a promising technology for reducing CO₂ concentrations in an environmentally friendly manner. However, the easy separation of FDH with enhanced stability and reusability is essential to the practical and economical implementation of the process. To achieve this, the enzyme must be used in an immobilized form. However, conventional immobilization by physical adsorption is prone to leaching, resulting in low stability. Although other immobilization methods (such as chemical adsorption) enhance stability, they generally result in low activity. In addition, mass transfer limitations are a major problem with most conventional immobilized enzymes. In this review paper, the effectiveness of metal organic frameworks (MOFs) is assessed as a promising alternative support for FDH immobilization. Kinetic mechanisms and stability of wild FDH from various sources were assessed and compared to those of cloned and genetically modified FDH. Various techniques for the synthesis of MOFs and different immobilization strategies are presented, with special emphasis on in situ and post synthetic immobilization of FDH in MOFs for CO₂ hydrogenation.

Synthesis and characterization of ordered mesoporous silicas for the immobilization of formate dehydrogenase (FDH)

This work studied the influence of the pore size and morphology of the mesoporous silica as support for formate dehydrogenase (FDH), the first enzyme of a multi-enzymatic cascade system to produce methanol, which catalyzes the reduction of carbon dioxide to formic acid. Specifically, a set of mesoporous silicas was modified with glyoxyl groups to immobilize covalently the FDH obtained from Candida boidinii. Three types of mesoporous silicas with different textural properties were synthesized and used as supports: i) SBA-15 (D_P = 4 nm); ii) MCF with 0.5 wt% mesitylene/pluronic ratio (D_P = 20 nm) and iii) MCF with 0.75 wt% mesitylene/pluronic ratio (D_P = 25 nm). As a whole, the immobilized FDH on MCF_0.75 exhibited higher thermal stability than the free enzyme, with 75% of residual activity after 24 h at 50 °C. FDH/MCF_0.5 exhibited the best immobilization yields: 69.4% of the enzyme supplied was covalently bound to the support. Interestingly, the specific activity increased as a function of the pore size of support and then the FDH/MCF_0.75 exhibited the highest specific activity (namely, 1.05 IU/g_MCF0.75) with an immobilization yield of 52.1%. Furthermore, it was noted that the immobilization yield and the specific activity of the FDH/MCF_0.75 varied as a function of the supported enzyme: as the enzyme loading increased the immobilization yield decreased while the specific activity increased. Finally, the reuse test has been carried out, and a residual activity greater than 70% was found after 5 cycles of reaction.

Catalytic bias in oxidation-reduction catalysis

Cataytic bias refers to the propensity of a reaction catalyst to effect a different rate acceleration in one direction versus the other in a chemical reaction under non-equilibrium conditions. In biocatalysis, the inherent bias of an enzyme is often advantagous to augment the innate thermodynamics of a reaction to promote efficiency and fidelity in the coordination of catabolic and anabolic pathways. In industrial chemical catalysis a directional cataltyic bias is a sought after property in facilitating the engineering of systems that couple catalysis with harvest and storage of for example fine chemicals or energy compounds. Interestingly, there is little information about catalytic bias in biocatalysis likely in large part due to difficulties in developing tractible assays sensitive enough to study detailed kinetics. For oxidation-reduction reactions, colorimetric redox indicators exist in a range of reduction potentials to provide a mechanism to study both directions of reactions in a fairly facile manner. The current short review attempts to define catalytic bias conceptually and to develop model systems for defining the parameters that control catalytic bias in enzyme catalyzed oxidation-reduction catalysis.

Visible-light driven reduction of CO2 to formate by a water-soluble zinc porphyrin and formate dehydrogenase system with electron-mediated amino and carbamoyl group-modified viologen

Visible-light-driven CO₂ reduction to formate with a system consisting of water-soluble zinc porphyrin, formate dehydrogenase from Candida boidinii and 1-amino-1′-carbamoyl-4,4′-bipyridinium salt as an electron mediator in the presence of triethanolamine was developed.

Visible-light-driven CO2 reduction to formate with a system of water-soluble zinc porphyrin and formate dehydrogenase in ionic liquid/aqueous media

Visible-light-driven CO₂ reduction to formate with a system consisting of water-soluble zinc tetraphenylporphyrin tetrasulfonate (ZnTPPS), formate dehydrogenase from Candida boidinii (CbFDH) and methylviologen (MV) in the presence of triethanolamine (TEOA) as an electron donor in an ionic liquid, 1-ethyl-3-methylimidazolium dimethyl phosphate ([EMlm][Me₂PO₄])/aqueous media was investigated. The catalytic activity of CbFDH for formate oxidation to CO₂ and CO₂ reduction to formate did not decrease significantly even in [EMlm][Me₂PO₄]/aqueous media, compared with that in aqueous media. The visible-light-driven MV reduction by the photosensitization of ZnTPPS in [EMlm][Me₂PO₄]/aqueous media proceeds more efficiently than in the aqueous media system. In the visible-light-driven CO₂ reduction to formate system of ZnTPPS, MV and CbFDH with [EMlm][Me₂PO₄]/aqueous media, moreover, the formate production concentration after 180 min decreased by only 20% as compared with the system in aqueous media.

Recent Advances in Developing Artificial Autotrophic Microorganism for Reinforcing CO2 Fixation

With the goal of achieving carbon sequestration, emission reduction and cleaner production, biological methods have been employed to convert carbon dioxide (CO2) into fuels and chemicals. However, natural autotrophic organisms are not suitable cell factories due to their poor carbon fixation efficiency and poor growth rate. Heterotrophic microorganisms are promising candidates, since they have been proven to be efficient biofuel and chemical production chassis. This review first briefly summarizes six naturally occurring CO2 fixation pathways, and then focuses on recent advances in artificially designing efficient CO2 fixation pathways. Moreover, this review discusses the transformation of heterotrophic microorganisms into hemiautotrophic microorganisms and delves further into fully autotrophic microorganisms (artificial autotrophy) by use of synthetic biological tools and strategies. Rapid developments in artificial autotrophy have laid a solid foundation for the development of efficient carbon fixation cell factories. Finally, this review highlights future directions toward large-scale applications. Artificial autotrophic microbial cell factories need further improvements in terms of CO2 fixation pathways, reducing power supply, compartmentalization and host selection.

Effect of Metal Ions on the Activity of Ten NAD-Dependent Formate Dehydrogenases

NAD-dependent formate dehydrogenase (FDH) enzymes are frequently used in industrial and scientific applications. FDH is a reversible enzyme that reduces the NAD molecule to NADH and produces CO₂ by oxidation of the formate ion, whereas it causes CO₂ reduction in the reverse reaction. Some transition metal elements - Fe³⁺, Mo⁶⁺ and W^{6 +} - can be found in the FDH structure of anaerobic and archaeal microorganisms, and these enzymes require cations and other redox-active cofactors for their FDH activity. While NAD-dependent FDHs do not necessarily require any metal cations, the presence of various metal cations can still affect FDH activities. To study the effect of 11 different metal ions, NAD-dependent FDH enzymes from ten different microorganisms were tested: Ancylobacter aquaticus (AaFDH), Candida boidinii (CboFDH), Candida methylica (CmFDH), Ceriporiopsis subvermispora (CsFDH), Chaetomium thermophilum (CtFDH), Moraxella sp. (MsFDH), Myceliophthora thermophila (MtFDH), Paracoccus sp. (PsFDH), Saccharomyces cerevisiae (ScFDH) and Thiobacillus sp. (TsFDH). It was found that metal ions (mainly Cu²⁺ and Zn²⁺) could have quite strong inhibition effects on several enzymes in the forward reaction, whereas several cations (Li⁺, Mg²⁺, Mn²⁺, Fe³⁺ and W⁶⁺) could increase the forward reaction of two FDHs. The highest activity increase (1.97 fold) was caused by Fe³⁺ in AaFDH. The effect on the reverse reaction was minimal. The modelled structures of ten FDHs showed that the active site is formed by 15 highly conserved amino acid residues spatially settling around the formate binding site in a conserved way. However, the residue differences at some of the sites close to the substrate do not explain the activity differences. The active site space is very tight, excluding water molecules, as observed in earlier studies. Structural examination indicated that smaller metal ions might be spaced close to the active site to affect the reaction. Metal ion size showed partial correlation to the effect on inhibition or activation. Affinity of the substrate may also affect the sensitivity to the metal's effect. In addition, amino acid differences on the protein surface may also be important for the metal ion effect.

Conserved Amino Acid Residues that Affect Structural Stability of Candida boidinii Formate Dehydrogenase

The NAD⁺-dependent formate dehydrogenase (FDH; EC 1.2.1.2) from Candida boidinii (CboFDH) has been extensively used in NAD(H)-dependent industrial biocatalysis as well as in the production of renewable fuels and chemicals from carbon dioxide. In the present work, the effect of amino acid residues Phe285, Gln287, and His311 on structural stability was investigated by site-directed mutagenesis. The wild-type and mutant enzymes (Gln287Glu, His311Gln, and Phe285Thr/His311Gln) were cloned and expressed in Escherichia coli. Circular dichroism (CD) spectroscopy was used to determine the effect of each mutation on thermostability. The results showed the decisive roles of Phe285, Gln287, and His311 on enhancing the enzyme's thermostability. The melting temperatures for the wild-type and the mutant enzymes Gln287Glu, His311Gln, and Phe285Thr/His311Gln were 64, 70, 77, and 73 °C, respectively. The effects of pH and temperature on catalytic activity of the wild-type and mutant enzymes were also investigated. Interestingly, the mutant enzyme His311Gln exhibits a large shift of pH optimum at the basic pH range (1 pH unit) and substantial increase of the optimum temperature (25 °C). The present work supports the multifunctional role of the conserved residues Phe285, Gln287, and His311 and further underlines their pivotal roles as targets in protein engineering studies.

How does methylviologen cation radical supply two electrons to the formate dehydrogenase in the catalytic reduction process of CO2 to formate?

Formate dehydrogenase from Candida boidinii (EC.1.2.1.2; CbFDH) is a commercially available enzyme and can be easily handled as a catalyst for the CO₂ reduction to formate in the presence of NADH, single-electron reduced methylviologen (MV⁺˙) and so on. It was found that the formate oxidation to CO₂ with CbFDH was suppressed using the oxidized MV as a co-enzyme and the single-electron reduced MV (MV⁺˙) was effective for the catalytic activity of CbFDH for the CO₂ reduction to formate compared with that using the natural co-enzyme of NADH [Y. Amao, Chem. Lett., 2017, 46, 780-788]. The CO₂ reduction to formate catalyzed by CbFDH requires two molecules of the MV⁺˙. In order to clarify the two-electron reduction process using MV⁺˙ in the CO₂ reduction to formate catalyzed with CbFDH, we attempted enzyme reaction kinetics, electrochemical and quantum chemical analyses. Kinetic parameters obtained from the enzymatic kinetic analysis metric revealed an index of affinity of MV⁺˙ for CbFDH in the CO₂ reduction to formate. From the results of the electrochemical analysis, it was predicted that only one molecule of MV⁺˙ was bound to CbFDH, and the MV bound to CbFDH was to be necessarily re-reduced by the electron source outside of CbFDH to supply the second electron in the CO₂ reduction to formate. From the results of docking simulation and density functional theory (DFT) calculations, it was indicated that one molecule of MV bound to the position close to CO₂ in the inner part of the substrate binding pocket of CbFDH contributed to the two-electron CO₂ reduction to formate.

Elevated conversion of CO2 to versatile formate by a newly discovered formate dehydrogenase from Rhodobacter aestuarii

Due to climate change, recent research interests have increased towards CO₂ utilization as a strategy to mitigate the atmospheric CO₂ level. Herein, we aimed to explore formate dehydrogenases (FDHs) from chemoautotroph to discover an efficient and O₂-tolerant biocatalyst for catalyzing the CO₂ reduction to a versatile formate. Through genome-mining and phylogenetic analysis, the FDH from Rhodobacter aestuarii (RaFDH) was newly discovered as a promising O₂-tolernat CO₂ reductase and was successfully expressed in Escherichia coli. In this study, the optimum conditions and turnover rates of RaFDH were examined for CO₂ reduction and formate oxidation. In particular, the RaFDH-driven CO₂ reduction far surpassed the formate oxidation with a turnover rate of 48.3 and 15.6 min^-1, respectively. The outstanding superiority of RaFDH towards CO₂ reduction can be applicable for constructing a feasible electroenzymatic system that produce a versatile formate from CO₂ as a cheap, abundant, and renewable resource.

High-level heterologous expression of active Chaetomium thermophilum FDH in Pichia pastoris

Nowadays, the use of formate dehydrogenase (FDH, EC 1.17.1.9) is well established as a means of NADH regeneration from NAD⁺ via the coupled conversion of formate into carbon dioxide. Recent studies have been reported that specifically Chaetomium thermophilum FDH (CtFDH) is the most efficient FDH catalyzing this reaction in reverse (i.e. using CO₂ as a substrate to produce formate, and thereby regenerating NAD⁺). However, to date the production of active CtFDH at high protein expression levels has received relatively little attention. In this study, we have tested the effect of batch and high cell density fermentation (HCDF) strategies in a small stirred fermenter, as well as the effect of supplementing the medium with casamino acids, on the expressed level of secreted CtFDH using P. pastoris. We have established that the amount of expressed CtFDH was indeed enhanced via a HCDF strategy and that extracellular protease activity was eliminated via the addition of casamino acids into the fermentation medium. On this basis, secreted CtFDH in an active form can be easily separated from the fermentation and can be used for subsequent biotechnological applications.