Novel Methodology for Rapid Detection of KRAS Mutation Using PNA-LNA Mediated Loop-Mediated Isothermal Amplification

Innovative PNA-LB mediated allele-specific LAMP for KRAS mutation profiling on a compact lab-on-a-disc device

Tailored healthcare, an approach focused on individual patients, requires integrating emerging interdisciplinary technologies to develop accurate and user-friendly diagnostic tools. KRAS mutations, prevalent in various common cancers, are crucial determinants in selecting patients for novel KRAS inhibitor therapies. This study presents a novel state-of-the-art Lab-on-a-Disc system utilizing peptide nucleic acids-loop backward (PNA-LB) mediated allele-specific loop-mediated isothermal amplification (LAMP) for detecting the frequent G12D KRAS mutation, signifying its superiority over alternative mutation detection approaches. The designed Lab-on-a-Disc system demonstrated exceptional preclinical and technical precision, accuracy, and versatility. By applying varying cutoff values to PNA- LB LAMP reactions, the assay's sensitivity and specificity were increased by 80 % and 90 %, respectively. The device's key advantages include a robust microfluidic Lab-on-a-Disc design, precise rotary control, and a cutting-edge induction heating module. These features enable multiplexing of LAMP reactions with high reproducibility and repeatability, with CV% values less than 3.5 % and 5.5 %, respectively. The device offers several methods for accurate endpoint result detection, including naked-eye observation, RGB image analysis using Python code, and time of fluorescence (Tf) values. Preclinical specificity and sensitivity, assessed using different cutoffs for Eva-Green fluorescence Tf values and pH-sensitive dyes, demonstrated comparable performance to the best standard methods. Overall, this study represents a significant step towards tailoring treatment strategies for cancer patients through precise and efficient mutation detection technologies.

Rapid IDH1-R132 genotyping panel utilizing locked nucleic acid loop-mediated isothermal amplification

While the detection of single-nucleotide variants (SNVs) is important for evaluating human health and disease, most genotyping methods require a nucleic acid extraction step and lengthy analytical times. Here, we present a protocol which utilizes the integration of locked nucleic acids (LNAs) into self-annealing loop primers for the allelic discrimination of five isocitrate dehydrogenase 1 R132 (IDH1-R132) variants using loop-mediated isothermal amplification (LAMP). This genotyping panel was initially evaluated using purified synthetic DNA to show proof of specific SNV discrimination. Additional evaluation using glioma tumor lysates with known IDH1-R132 mutational status demonstrated specificity in approximately 35 min without the need for a nucleic acid extraction purification step. This LNA-LAMP-based genotyping assay can detect single base differences in purified nucleic acids or tissue homogenates, including instances where the variant of interest is present in an excess of background wild-type DNA. The pH-based colorimetric indicator of LNA-LAMP facilitates convenient visual interpretation of reactions, and we demonstrate successful translation to an end-point format using absorbance ratio, allowing for an alternative and objective approach for differentiating between positive and negative reactions. Importantly, the LNA-LAMP genotyping panel is highly reproducible, with no false-positive or false-negative results observed.

Versatility of reverse transcriptase loop-mediated isothermal amplification (RT-LAMP) from diagnosis of early pathological infection to mutation detection in organisms

Loop-mediated isothermal amplification (LAMP) is a rapid, state-of-the-art DNA amplification technology, used primarily for the quick diagnosis and early identification of microbial infection, caused by pathogens such as virus, bacteria and malaria. A target DNA can be amplified within 30 min using the LAMP reaction, taking place at a steady temperature. The LAMP method uses four or six primers to bind eight regions of a target DNA and has a very high specificity. The devices used for conducting LAMP are usually simple since the LAMP method is an isothermal process. When LAMP is coupled with Reverse Transcription (RT), it allows direct detection of RNA in a sample. This greatly enhances the efficiency of diagnosis of RNA viruses in a sample. Recently, the rampant spread of COVID-19 demanded such a rapid, simple, and cost-effective Point of Care Test (PoCT) for the accurate diagnosis of this pandemic. Loop-mediated isothermal amplification (LAMP) assays are not only used for the detection of microbial pathogens, but there are various other applications such as detection of genetic mutations in food and various organisms. In this review, various implementations of RT-LAMP techniques would be discussed.

A point-of-care platform for hair loss-related single nucleotide polymorphism genotyping

Rapid genotyping of single nucleotide polymorphism (SNP) is crucial for prognostics and disease management, enabling more rapid therapy selection and treatment determination. Here, we introduce a point-of-care platform for hair loss-related SNP genotyping based on allele-specific loop-mediated isothermal amplification (AS-LAMP) combined with naked-eye visualization. The specificity of the AS-LAMP assay was significantly enhanced by using mismatched allele-specific primers. AS-LAMP reaction and Schiff's reagent-based colorimetric detection were successfully performed using a thermoplastic genotyping chip. This strategy also showed potential for determining homozygotes and heterozygotes in a target sample. To assess SNP genotyping capacity, the genotyping chip was fabricated to visually detect rs6152 polymorphism of an androgen receptor gene associated with genetically induced hair loss. The genotyping platform rapidly identified the SNP within 40 min, and the detection limit was as low as 1 pg/μL of the target DNA contained in human serum. The introduced strategy showed high specificity and stability in discriminating low-abundance mutations, making it suitable as a portable and affordable point-of-care platform for rapid and accurate SNP discrimination applicable for bedside detection.

Current advances in detecting genetic and epigenetic biomarkers of colorectal cancer

Colorectal carcinoma (CRC) is the third most common cancer in terms of diagnosis and the second in terms of mortality. Recent studies have shown that various proteins, extracellular vesicles (i.e., exosomes), specific genetic variants, gene transcripts, cell-free DNA (cfDNA), circulating tumor DNA (ctDNA), microRNAs (miRNAs), long non-coding RNAs (lncRNAs), and altered epigenetic patterns, can be used to detect, and assess the prognosis of CRC. Over the last decade, a plethora of conventional methodologies (e.g., polymerase chain reaction [PCR], direct sequencing, enzyme-linked immunosorbent assay [ELISA], microarray, in situ hybridization) as well as advanced analytical methodologies (e.g., microfluidics, electrochemical biosensors, surface-enhanced Raman spectroscopy [SERS]) have been developed for analyzing genetic and epigenetic biomarkers using both optical and non-optical tools. Despite these methodologies, no gold standard detection method has yet been implemented that can analyze CRC with high specificity and sensitivity in an inexpensive, simple, and time-efficient manner. Moreover, until now, no study has critically reviewed the advantages and limitations of these methodologies. Here, an overview of the most used genetic and epigenetic biomarkers for CRC and their detection methods are discussed. Furthermore, a summary of the major biological, technical, and clinical challenges and advantages/limitations of existing techniques is also presented.

Development of a POCT detection platform based on a locked nucleic acid-enhanced ARMS-RPA-GoldMag lateral flow assay

In this study, a novel genotyping point-of-care testing (POCT) rapid detection device, the locked nucleic acid (LNA)-amplification refractory mutation system (ARMS)-recombinase polymerase amplification (RPA)-GoldMag lateral flow assay (LFA) platform, was provided by mining and synthesis based on prior technology. Research methods based on system-integrated innovation and knowledge-integrated generation have become a new trend in technology development. Here, we exploit the combination of LNA-coupled ARMS-RPA and gold nanoparticle probe technology for detection signal amplification, thus pioneering a new tool for accurate, rapid, and cost-effective genotyping. We also performed SNP typing detection and clinical validation of this new assay platform using common glucose-6-phosphate dehydrogenase (G6PD) gene single nucleotide polymorphism (SNP) loci, and the results demonstrated the high sensitivity, specificity, stability, accuracy and feasibility of the LNA-ARMS-RPA-GoldMag lateral flow assay platform. It is hoped that this new technology will make a significant contribution to the field of POCT rapid diagnosis and aim to expand the application space, reflecting its clinical application value and development prospects.

Development of a PNA-LNA-LAMP Assay to Detect an SNP Associated with QoI Resistance in Erysiphe necator

The repetitive use of quinone outside inhibitor fungicides (QoIs, strobilurins; Fungicide Resistance Action Committee [FRAC] 11) to manage grape powdery mildew has led to development of resistance in Erysiphe necator. While several point mutations in the mitochondrial cytochrome b gene are associated with resistance to QoI fungicides, the substitution of glycine to alanine at codon 143 (G143A) has been the only mutation observed in QoI-resistant field populations. Allele-specific detection methods such as digital droplet PCR and TaqMan probe-based assays can be used to detect the G143A mutation. In this study, a peptide nucleic acid-locked nucleic acid mediated loop-mediated isothermal amplification (PNA-LNA-LAMP) assay consisting of an A-143 reaction and a G-143 reaction, was designed for rapidly detecting QoI resistance in E. necator. The A-143 reaction amplifies the mutant A-143 allele faster than the wild-type G-143 allele, while the G-143 reaction amplifies the G-143 allele faster than the A-143 allele. Identification of resistant or sensitive E. necator samples was determined by which reaction had the shorter time to amplification. Sixteen single-spore QoI-resistant and -sensitive E. necator isolates were tested using both assays. Assay specificity in distinguishing the single nucleotide polymorphism (SNP) approached 100% when tested using purified DNA of QoI-sensitive and -resistant E. necator isolates. This diagnostic tool was sensitive to one-conidium equivalent of extracted DNA with an R2 value of 0.82 and 0.87 for the G-143 and A-143 reactions, respectively. This diagnostic approach was also evaluated against a TaqMan probe-based assay using 92 E. necator samples collected from vineyards. The PNA-LNA-LAMP assay detected QoI resistance in ≤30 min and showed 100% agreement with the TaqMan probe-based assay (≤1.5 h) for the QoI-sensitive and -resistant isolates. There was 73.3% agreement with the TaqMan probe-based assay when samples had mixed populations with both G-143 and A-143 alleles present. Validation of the PNA-LNA-LAMP assay was conducted in three different laboratories with different equipment. The results showed 94.4% accuracy in one laboratory and 100% accuracy in two other laboratories. The PNA-LNA-LAMP diagnostic tool was faster and required less expensive equipment relative to the previously developed TaqMan probe-based assay, making it accessible to a broader range of diagnostic laboratories for detection of QoI resistance in E. necator. This research demonstrates the utility of the PNA-LANA-LAMP for discriminating SNPs from field samples and its utility for point-of-care monitoring of plant pathogen genotypes.

Rapid extraction-free detection of the R132H isocitrate dehydrogenase mutation in glioma using colorimetric peptide nucleic acid-loop mediated isothermal amplification (CPNA-LAMP)

The R132H isocitrate dehydrogenase one (IDH1) mutation is a prognostic biomarker present in a subset of gliomas and is associated with heightened survival when paired with aggressive surgical resection. In this study, we establish proof-of-principle for rapid colorimetric detection of the IDH1-R132H mutation in tumor samples in under 1 hour without the need for a nucleic acid extraction. Colorimetric peptide nucleic acid loop-mediated isothermal amplification (CPNA-LAMP) utilizes 4 conventional LAMP primers, a blocking PNA probe complementary to the wild-type sequence, and a self-annealing loop primer complementary to the single nucleotide variant to only amplify the DNA sequence containing the mutation. This assay was evaluated using IDH1-WT or IDH1-R132H mutant synthetic DNA, wild-type or IDH1-R132H mutant U87MG cell lysates, and tumor lysates from archived patient samples in which the IDH1 status was previously determined using immunohistochemistry (IHC). Reactions were performed using a hot water bath and visually interpreted as positive by a pink-to-yellow color change. Results were subsequently verified using agarose gel electrophoresis. CPNA-LAMP successfully detected the R132H single nucleotide variant, and results from tumor lysates yielded 100% concordance with IHC results, including instances when the single nucleotide variant was limited to a portion of the tumor. Importantly, when testing the tumor lysates, there were no false positive or false negative results.

Localization of EGFR Mutations in Non-small-cell Lung Cancer Tissues Using Mutation-specific PNA-DNA Probes

BACKGROUND/AIM

Epidermal growth factor receptor (EGFR) signaling inhibitors are potent therapeutic agents for EGFR-mutant non-small-cell lung cancer, but the effects of such inhibitors on the localization of EGFR mutations in tumor tissues remain to be elucidated. Thus, a simple and efficient technology for the detection of mutations in tumor tissue specimens needs to be developed.

MATERIALS AND METHODS

Using an EGFR mutation-specific peptide nucleic acid (PNA)-DNA probe, the EGFR mutation-positive part of whole NSCLC tissues was visualized by immunofluorescence. Formalin-fixed paraffin-embedded sections obtained from A549, NCI-H1975, HCC827 and PC-9 tumors transplanted into nude mice were subjected to staining using PNA-DNA probes specific for the mRNA sequences producing the L858R, del E746-A750 and T790M mutations.

RESULTS

The probes for the L858R mutation showed intense positive staining in H1975 cells, and the probe for the del E746-A750 mutation exhibited positive staining specifically in HCC827 and PC-9 tumors. On the other hand, A549 tumors without EGFR mutation did not show any significant staining for any PNA-DNA probe. In combination staining, the addition of cytokeratin stain increased the positive staining rate of each PNA-DNA probe. In addition, the positive staining rate of the probes for the L858R mutation was comparable to that of the antibody to EGFR L858R mutated protein.

CONCLUSION

PNA-DNA probes specific for EGFR mutations might be useful tools to detect heterogeneous mutant EGFR expression in cancer tissues and efficiently evaluate the effect of EGFR signaling inhibitors on tissues of EGFR-mutant cancer.

Development of a Detection System for ESR1 Mutations in Circulating Tumour DNA Using PNA-LNA-Mediated PCR Clamping

Although circulating tumour DNA (ctDNA)-based next-generation sequencing (NGS) is a less invasive method for assessing ESR1 mutations that are essential mechanisms of endocrine therapy resistance in patients with oestrogen receptor-positive breast cancer, adequate amounts of DNA are required to assess polyclonal ESR1 mutations. By combining a peptide nucleic acid and locked nucleic acid polymerase chain reaction (PNA-LNA PCR) clamping assay, we have developed a novel detection system to screen for polyclonal ESR1 mutations in ctDNA. A validation assay was prospectively performed on clinical samples and compared with the NGS results. The PNA-LNA PCR clamp assay was validated using six and four blood samples in which ESR1 mutations were detected by NGS and no mutations were detected, respectively. The PNA-LNA assay results were comparable with those of NGS. We prospectively assessed the concordance between the PNA-LNA PCR clamp method and NGS. Using the PNA-LNA PCR clamp method, ESR1 mutations were detected in 5 out of 18 samples, including those in which mutations were not detected by NGS due to small amounts of ctDNA. The PNA-LNA PCR clamping method is a highly sensitive and minimally invasive assay for polyclonal ESR1 mutation detection in the ctDNA of patients with breast cancer.

Vivid COVID-19 LAMP is an ultrasensitive, quadruplexed test using LNA-modified primers and a zinc ion and 5-Br-PAPS colorimetric detection system

Sensitive and rapid point-of-care assays have been crucial in the global response to SARS-CoV-2. Loop-mediated isothermal amplification (LAMP) has emerged as an important diagnostic tool given its simplicity and minimal equipment requirements, although limitations exist regarding sensitivity and the methods used to detect reaction products. We describe the development of Vivid COVID-19 LAMP, which leverages a metallochromic detection system utilizing zinc ions and a zinc sensor, 5-Br-PAPS, to circumvent the limitations of classic detection systems dependent on pH indicators or magnesium chelators. We make important strides in improving RT-LAMP sensitivity by establishing principles for using LNA-modified LAMP primers, multiplexing, and conducting extensive optimizations of reaction parameters. To enable point-of-care testing, we introduce a rapid sample inactivation procedure without RNA extraction that is compatible with self-collected, non-invasive gargle samples. Our quadruplexed assay (targeting E, N, ORF1a, and RdRP) reliably detects 1 RNA copy/µl of sample (=8 copies/reaction) from extracted RNA and 2 RNA copies/µl of sample (=16 copies/reaction) directly from gargle samples, making it one of the most sensitive RT-LAMP tests and even comparable to RT-qPCR. Additionally, we demonstrate a self-contained, mobile version of our assay in a variety of high-throughput field testing scenarios on nearly 9,000 crude gargle samples. Vivid COVID-19 LAMP can be an important asset for the endemic phase of COVID-19 as well as preparing for future pandemics.

Loop-Mediated Isothermal Amplification: From Theory to Practice

Increasing the accuracy of pathogen identification and reducing the duration of analysis remain relevant for modern molecular diagnostics up to this day. In laboratory and clinical practice, detection of pathogens mostly relies on methods of nucleic acid amplification, among which the polymerase chain reaction (PCR) is considered the "gold standard." Nevertheless, in some cases, isothermal amplification methods act as an alternative to PCR diagnostics. Upon more than thirty years of the development of isothermal DNA synthesis, the appearance of loop-mediated isothermal amplification (LAMP) has enabled new directions of in-field diagnostics of bacterial and viral infections. This review examines the key characteristics of the LAMP method and corresponding features in practice. We discuss the structure of LAMP amplicons with single-stranded loops, which have the sites for primer annealing under isothermal conditions. The latest achievements in the modification of the LAMP method are analyzed, which allow considering it as a unique platform for creating the next-generation diagnostic assays.

Cationic copolymers that enhance wild-type-specific suppression in BNA-clamp PCR and preferentially increase the Tm of fully matched complementary DNA and BNA strands

Mutation detection is of major interest in molecular diagnostics, especially in the field of oncology. However, detection can be challenging as mutant alleles often coexists with excess copies of wild-type alleles. Bridged nucleic acid (BNA)-clamp PCR circumvents this challenge by preferentially suppressing the amplification of wild-type alleles and enriching rare mutant alleles. In this study, we screened cationic copolymers containing nonionic and anionic repeat units for their ability to 1) increase the Tm of double-stranded DNA, 2) avoid PCR inhibition, and 3) enhance the suppression of wild-type amplification in BNA-clamp PCR to detect the KRAS G13D mutation. The selected copolymers that met these criteria consisted of four types of amines and anionic and/or nonionic units. In BNA-clamp PCR, these copolymers increased the threshold cycle (Ct) of the wild-type allele only and enabled mutation detection from templates with a 0.01% mutant-to-wild-type ratio. Melting curve analysis with 11-mer DNA-DNA or BNA-DNA complementary strands showed that these copolymers preferentially increased the Tm of perfectly matched strands over strands containing 1-bp mismatches. These results suggested that these copolymers preferentially stabilize perfectly matched DNA and BNA strands and thereby enhance rare mutant detection in BNA-clamp PCR.

Programmable design of isothermal nucleic acid diagnostic assays through abstraction-based models

Accelerating the design of nucleic acid amplification methods remains a critical challenge in the development of molecular tools to identify biomarkers to diagnose both infectious and non-communicable diseases. Many of the principles that underpin these mechanisms are often complex and can require iterative optimisation. Here we focus on creating a generalisable isothermal nucleic acid amplification methodology, describing the systematic implementation of abstraction-based models for the algorithmic design and application of assays. We demonstrate the simplicity, ease and flexibility of our approach using a software tool that provides amplification schemes de novo, based upon a user-input target sequence. The abstraction of reaction network predicts multiple reaction pathways across different strategies, facilitating assay optimisation for specific applications, including the ready design of multiplexed tests for short nucleic acid sequence miRNAs or for difficult pathogenic targets, such as highly mutating viruses.

Detecting nucleic acids often requires choosing between different amplification mechanisms. Here the authors present a generalisable and programmable isothermal methodology, demonstrated in clinical applications, including for multiplexed detection of short miRNAs.

Design of Oligonucleotides for Allele-Specific Amplification Based on PCR and Isothermal Techniques

Single-nucleotide variations have been associated to various genetic diseases, variations on drug efficiency, and differences in cancer prognostics. The detection of these changes in nucleic acid sequences from patient samples is particularly useful for accurate diagnosis, therapeutics, and disease management. A reliable allele-specific amplification is still an important challenge for molecular-based diagnostic technologies. In the last years, allele-specific primers have been designed for promoting the enrichment of certain variants, based on a higher stability of primer/template duplexes. Also, several methods are based on the addition of a blocking oligonucleotide that prevent the amplification of a specific variant, enabling that other DNA variants can be observed. In this context, genotyping methods based on isothermal amplification techniques are increasing, especially those assays aimed to be deployed at point-of-care applications. The correct selection of target sequences is crucial for reaching the required analytical performances, in terms of reaction time, amplification yield, and selectivity. The present chapter describes the design criteria for the selection of primers and blockers for relevant PCR approaches and novel isothermal strategies. Several successful examples are provided in order to highlight the main design restrictions and the potential to be extended to other applications.

Fluorescent and colorimetric RT-LAMP as a rapid and specific qualitative method for chronic myeloid leukemia diagnosis

The detection of BCR-ABL1 mRNA transcripts is essential to molecular chronic myeloid leukemia (CML) diagnosis. In most cases, the RT-qPCR technique is performed as the gold standard diagnosis tool for clinical cases. However, this method requires expensive reagents and equipment, such as a real-time thermal cycler, probes and master mix. Consequently, the development and validation of simple and low-cost methods are essential for a rapid CML diagnosis in less specialized and equipped centers. In this study, we develop and demonstrate an accessible, rapid, and low-cost method using RT-LAMP for BCR-ABL1 detection in both cell lines and CML clinical samples, using fluorescent and colorimetric assays. Both methods demonstrated diagnostic specificity of 100% and while diagnostic sensitivity reaches more than 90% in samples with RT-qPCR cycle threshold above 31. The obtained data indicates that the proposed method here described is a cheaper, robust and specific approach for CML diagnosis with outstanding performance, especially for CML diagnostic procedure where present high BCR-ABL1 expression.

Rapid diagnosis of seven high-risk human papillomavirus subtypes by a novel loop-mediated isothermal amplification method

Current human papillomavirus (HPV) detection methods require complex instruments, skilled staff and have a high cost. Therefore, novel testing approaches are needed which are easy to implement, highly sensitive, and low cost. Loop-mediated isothermal amplification (LAMP) is an isothermal amplification technique. In this study, according to the conditions in China, a novel LAMP method for detecting seven high-risk HPV subtypes (16, 18, 33, 39, 45, 52, and 58) was designed and evaluated. The DNA from plasmid and cervical specimens was extracted using Chelex 100 and measured by qPCR and LAMP assay. LAMP products were observed under ultraviolet light. HPV sequences were successfully amplified and a plateau time of 19-75 min was maintained. The concentration of positive reactions ranged between 20 copies/μL and 200000 copies/μL. Additionally, there was no cross-reactivity between HPV16, 18, 33, 39, 45, 52, 58, 31, 35, 45, 51, 56, 59, 66, or 68. For clinical samples, the LAMP assay had high sensitivity and specificity for HPV16, 18, 33, 39, 45, 52, and 58. However, 5% (72/1447) of the samples tested yielded false-positive results. In conclusion, the novel LAMP assay for HPV16, 18, 33, 39, 45, 52, and 58 has high sensitivity and specificity, a low cost, and is simple and rapid to perform. The LAMP assay can improve HPV detection in resource-limited settings, especially in primary care hospitals and rural areas.

Marker-Assisted Selection for Pollen-Free Somatic Plants of Sugi (Japanese Cedar, Cryptomeria japonica): A Simple and Effective Methodology for Selecting Male-Sterile Mutants With ms1-1 and ms1-2

Pollen allergy caused by sugi (Japanese cedar, Cryptomeria japonica) is a serious problem in Japan. One of the measures against pollinosis is the use of male-sterile plants (MSPs; pollen-free plants). In this context, the development of a novel technique for the efficient production of sugi MSPs, which combines marker-assisted selection (MAS) with somatic embryogenesis (SE), was recently reported by our research group. To improve the efficiency of MSP production, in this paper we report improved MAS for male-sterile individuals from embryogenic cells, cotyledonary embryos, and somatic plants of sugi using a newly developed marker in the form of the causative mutation of MS1 itself, selecting individuals with ms1-1 and ms1-2 male-sterile mutations. We also describe simplified methods for extracting DNA from different plant materials and for MAS using LAMP diagnostics. Finally, we show that MAS can be efficiently performed using the one-step indel genotyping (ING) marker developed in this study and using InstaGene for DNA extraction. The combination of SE and 100% accurate marker selection during the embryogenic cell stage enables the mass production of MS1 male-sterile sugi seedlings.

Loop-Primer Endonuclease Cleavage-Loop-Mediated Isothermal Amplification Technology for Multiplex Pathogen Detection and Single-Nucleotide Polymorphism Identification

Loop-mediated isothermal amplification (LAMP) provides effective diagnostic technology for infectious disease pathogen identification and is compatible with inexpensive instrumentation for use in disease-prevalent developing regions. However, simultaneous multiple-target detection and single-nucleotide polymorphism (SNP) identification, essential properties of nucleic acid diagnostics, are difficult to achieve using LAMP. This study introduces loop-primer endonuclease cleavage (LEC)-LAMP, a singleplex or multiplex LAMP technology with single-base specificity for variable SNP identification. We developed a singleplex LEC-LAMP Neisseria meningitidis assay that demonstrated complete analytical specificity and a limit of detection of 3.1 genome copies per reaction. Small-scale clinical testing of this assay demonstrated 100% diagnostic specificity and sensitivity when assessed with anonymized DNA extracts from confirmed cases of bacterial meningitis infection. The single-base specificity of this assay indicated effective SNP identification properties when challenged with DNA templates containing SNPs located within a specific six-base region. This assay was modified to generate an allele-specific LEC-LAMP N. meningitidis assay that successfully demonstrated single-tube differentiation of wild-type and mutant allele templates. The singleplex assay was further modified to generate a multiplex LEC-LAMP assay that successfully demonstrated simultaneous multiple-target detection of three bacterial targets, N. meningitidis, Streptococcus pneumonia, and Hemophilus influenzae. LEC-LAMP is the first report of single-tube, real-time, singleplex or multiplex LAMP technology with single-base specificity for variable SNP identification.

Allele-Specific Recombinase Polymerase Amplification to Detect Sickle Cell Disease in Low-Resource Settings

Sickle cell disease (SCD) is a group of common, life-threatening disorders caused by a point mutation in the β globin gene. Early diagnosis through newborn and early childhood screening, parental education, and preventive treatments are known to reduce mortality. However, the cost and complexity of conventional diagnostic methods limit the feasibility of early diagnosis for SCD in resource-limited areas worldwide. Although several point-of-care tests are commercially available, most are antibody-based tests, which cannot be used in patients who have recently received a blood transfusion. Here, we describe the development of a rapid, low-cost nucleic acid test that uses real-time fluorescence to detect the point mutation encoding hemoglobin S (HbS) in one round of isothermal recombinase polymerase amplification (RPA). When tested with a set of clinical samples from SCD patients and healthy volunteers, our assay demonstrated 100% sensitivity for both the β^A globin and β^S globin alleles and 94.7 and 97.1% specificities for the β^A globin allele and β^S globin allele, respectively (n = 91). Finally, we demonstrate proof-of-concept sample-to-answer genotyping of genomic DNA from capillary blood using an alkaline lysis procedure and direct input of diluted lysate into RPA. The workflow is performed in <30 min at a cost of <$5 USD on a commercially available benchtop fluorimeter and an open-source miniature fluorimeter. This study demonstrates the potential utility of a rapid, sample-to-answer nucleic acid test for SCD that may be implemented near the point of care and could be adapted to other disease-causing point mutations in genomic DNA.

Advances in Mutation Detection Using Loop-Mediated Isothermal Amplification

Detection of mutations and single-nucleotide polymorphisms is highly important for diagnostic applications. Loop-mediated isothermal amplification (LAMP) is a powerful technique for the rapid and sensitive detection of nucleic acids. However, LAMP traditionally does not possess the ability to resolve single-nucleotide differences within the target sequence. Because of its speed and isothermal nature, LAMP is ideally suited for point-of-care applications in resource-limited settings. Recently, different approaches have been developed and applied to enable single-nucleotide differentiation within target sequences. This Mini-Review highlights advancements in mutation detection using LAMP. Methods involving primer design and modification to enable sequence differentiation are discussed. In addition, the development of probe-based detection methods for mutation detection are also covered.

A Fast, Naked-Eye Assay for Varietal Traceability in the Durum Wheat Production Chain

The development of a colorimetric mono-varietal discriminating assay, aimed at improving traceability and quality control checks of durum wheat products, is described. A single nucleotide polymorphism (SNP) was identified as a reliable marker for wheat varietal discrimination, and a rapid test for easy and clear identification of specific wheat varieties was developed. Notably, an approach based on the loop-mediated isothermal amplification reaction (LAMP) as an SNP discrimination tool, in combination with naked-eye visualization of the results, was designed and optimized. Our assay was proven to be effective in the detection of adulterated food products, including both substitution and mixing with different crop varieties.

Validation of PfSNP-LAMP-Lateral Flow Dipstick for Detection of Single Nucleotide Polymorphism Associated with Pyrimethamine Resistance in Plasmodium falciparum

The loop-mediated isothermal amplification coupled with lateral flow dipstick (PfSNP-LAMP-LFD) was recently developed to detect single nucleotide polymorphism (AAT → ATT), corresponding to substitution of asparagine to isoleucine at amino acid position 51 in the P. falciparumdhfr-ts gene associated with antifolate resistance. In this present study, the PfSNP-LAMP-LFD was validated on 128 clinical malaria samples of broad ranged parasite densities (10 to 87,634 parasites per microliter of blood). The results showed 100% accuracy for the detection of single nucleotide polymorphism for N51I mutation. Indeed, the high prevalence of N51I in the Pfdhfr-ts gene detected in the clinical samples is in line with reports of widespread antifolate resistant P. falciparum in Thailand. The relationship between enzyme choice and reaction time was observed to have an effect on PfSNP-LAMP-LFD specificity; however, the method yielded consistent results once the conditions have been optimized. The results demonstrate that PfSNP-LAMP-LFD is a simple method with sufficient sensitivity and specificity to be deployed in routine surveillance of antifolate resistance molecular marker and inform antimalarial management policy.

A novel peptide nucleic acid- and loop-mediated isothermal amplification assay for the detection of mutations in the 23S rRNA gene of Treponema pallidum

Introduction. Macrolides could be a potential alternative treatment for Treponema pallidum infections in patients; however, macrolide-resistant T. pallidum is spreading rapidly worldwide.Hypothesis/Gap Statement. There are presently no alternatives to serological tests for syphilis that can be used to evaluate therapeutic effects due to the fact that T. pallidum cannot be cultured in vitro.Aim. In this study, we constructed a method for rapidly identifying T. pallidum and confirming macrolide resistance by using loop-mediated isothermal amplification (LAMP) with peptide nucleic acids (PNAs).Methodology. A set of LAMP primers was designed to span nucleotide positions 2058 and 2059 in 23S rRNA. A PNA clamping probe was also designed to be complementary to the wild-type sequence (A2058/A2059) and positioned to interfere with both the annealing of the 3' end of the backward inner primer and the concomitant extension. Prior to the LAMP assay, swab samples from suspected syphilitic lesions were boiled for DNA extraction.Results. The assay had an equivalent detection limit of 1.0×10¹ copies/reaction and showed specificity against 38 pathogens. In the presence of a 4 µM PNA probe, LAMP amplified up to 1.0×101 copies/reaction using plasmids harbouring the complementary mutant sequences (A2058G or A2059G), whereas amplification was completely blocked for the wild-type sequence up to a concentration of 1.0×10³ copies/reaction. For the 66 PCR-positive clinical specimens, the overall detection rate via LAMP was 93.9 % (62/66). Amplification was successful for all 53 mutant samples and was incomplete for all nine WT samples by the PNA-mediated LAMP assays.Conclusion. We developed a PNA-mediated LAMP method that enabled us to rapidly identify T. pallidum and determine its macrolide susceptibility via a culture-independent protocol.

Rapid detection of rifampicin-resistant Mycobacterium tuberculosis, based on isothermal DNA amplification and DNA chromatography

Rapid and easy detection of nucleotide point mutations in bacterial pathogens associated with drug resistance is essential for the proper use of antimicrobials. Here, we developed a rapid and simple method for the detection of mutations using Loop-mediated isothermal amplification (LAMP) combined with the single-tag hybridization (STH) chromatographic printed array strips (PAS) method. This procedure is able to detect four mutations (C1349 T, A1295C, G1303 T, A1304 T) in Rifampicin Resistance Determining Region (RRDR) of rifampicin-resistant Mycobacterium tuberculosis (RR-TB), simultaneously. LAMP reactions contained a LAMP primer and eight allele-specific primers for each mutation. The allele-specific primers products were detected by nucleic acid chromatography using PAS. Four detection lines were detected there, one of which was detected at different positions depend on the wild type and the mutant type. We carried out the four mutations detection using 31 genomic DNA (2 A1295T, 1 G1303 T, 6 A1304 T, 22 C1349 T) from clinical isolate. The mutations have been confirmed by sequence analysis. The detection results were completely consistent with the sequence analysis. In the present study, four mutations could be detected, but only 60% of RR-TB could be detected with these four. It is expected that the detection rate will increase by adding more mutant primers. The combined LAMP and STH chromatographic PAS method is a simple and rapid method for detecting point mutations in clinical isolates as a point-of-care testing (POCT) technique. In addition, it does not require special equipment and can meet the demand in areas where drug-resistant bacteria are endemic, such as developing countries.

Optical and theoretical study of strand recognition by nucleic acid probes

Detection of nucleic acids is crucial to the study of their basic properties and consequently to applying this knowledge to the determination of pathologies such as cancer. In this work, our goal is to determine new trends for creating diagnostic tools for cancer driver mutations. Herein, we study a library of natural and modified oligonucleotide duplexes by a combination of optical and theoretical methods. We report a profound effect of additives on the duplexes, including nucleic acids as an active crowder. Unpredictably and inconsistent with DNA+LNA/RNA duplexes, locked nucleic acids contribute poorly to mismatch discrimination in the DNA+LNA/DNA duplexes. We develop a theoretical framework that explains poor mismatch discrimination in KRAS oncogene. We implement our findings in a bead-bait genotyping assay to detect mutated human cancer RNA. The performance of rationally designed probes in this assay is superior to the LNA-primer polymerase chain reaction, and it agrees with sequencing data.

Loop Mediated Isothermal Amplification: A Promising Tool for Screening Genetic Mutations

Mutation screening is elemental for clinical diagnosis and in determining therapeutic strategies. Nucleic acid-based techniques are considered to be the most accurate tools in genetic diagnosis. One such technique is loop-mediated isothermal amplification (LAMP) assay, which has seen tremendous applications in recent years. The advantages of the assay lie in its rapidity, efficiency, sensitivity, and cost. It works in isothermal conditions and amplifies the target gene using DNA polymerases that have strand displacement activity. To date, the assay has been widely used in different fields of research, including pathogen detection, crop development, and disease diagnosis. However, despite the potential, its application in mutation screening has been minimal. This review highlights the LAMP assay and its variants that have been developed for screening single-nucleotide polymorphisms and gene translocations in cancer.

<p>Establishment and Evaluation of a Novel Method Based on Loop-Mediated Isothermal Amplification for the Rapid Diagnosis of Thalassemia Genes</p>

Purpose

Currently, thalassemia is commonly detected using gap-polymerase chain reaction (PCR) and deoxyribonucleic acid (DNA) reverse dot blot, which have high requirements of space, instruments, and personnel. Therefore, it is necessary to develop a new method for thalassemia detection with high sensitivity, low cost, and simple and fast operation. In this study, we aimed to design and evaluate a new method for detecting three α-thalassemia genes including –Southeast Asian (SEA), -α3.7, and -α4.2 and five β-thalassemia genes including 654M, 41/42M, −28M, 17M, and 27/28M based on loop-mediated isothermal amplification (LAMP).

Methods

Primer sequences were designed using Primer Explorer V4 software. Blood samples (5 mL) were collected from all participants in EDTA. DNA was extracted using Chelex 100 and was subjected to LAMP. LAMP products were detected by fluorescence development in ultraviolet light.

Results

We found that LAMP assays for positive samples of thalassemia reached a plateau before 60 minutes, whereas the negative control samples entered the plateau after 70 minutes or showed no amplification. The concentration range of positive reactions was between 20–60 pg/μL and 20–60 ng/μL. Additionally, there were no cross-reactivities among 8 thalassemia subtypes. For clinical samples, the positive sample tube showed strong green fluorescence, whereas the negative tube showed light green fluorescence. According to these results, the LAMP method has high sensitivity for detecting thalassemia (252/254). However, 43 false-positive results were obtained in the LAMP test. The LAMP assay was also of low cost and with simple and fast operation.

Conclusion

The novel LAMP assay can be completed within 60 min using a heating block or a water bath, and the result can be read visually based on color change to detect thalassemia. The LAMP assay fulfills the requirements of field application and resource-limited areas, especially those with primary hospitals and rural areas.

Enhanced SNP-sensing using DNA-templated reactions through confined hybridization of minimal substrates (CHOMS)

DNA or RNA templated reactions are attractive for nucleic acid sensing and imaging. As for any hybridization-based sensing, there is a tradeoff between sensitivity (detection threshold) and resolution (single nucleotide discrimination). Longer probes afford better sensitivity but compromise single nucleotide resolution due to the small thermodynamic penalty of a single mismatch. Herein we report a design that overcomes this tradeoff. The reaction is leveraged on the hybridization of a minimal substrate (covering 4 nucleotides) which is confined by two guide DNAs functionalized respectively with a ruthenium photocatalyst. The use of a catalytic reaction is essential to bypass the exchange of guide DNAs while achieving signal amplification through substrate turnover. The guide DNAs restrain the reaction to a unique site and enhance the hybridization of short substrates by providing two π-stacking interactions. The reaction was shown to enable the detection of SNPs and SNVs down to 50 pM with a discrimination factor ranging from 24 to 309 (median 82, 27 examples from 3 oncogenes). The clinical diagnostic potential of the technology was demonstrated with the analysis of RAS amplicons obtained directly from cell culture.

AS-LAMP: A New and Alternative Method for Genotyping

In recent decades, different methods have been introduced for the genotyping of Single Nucleotide Polymorphisms (SNPs) and mutations in nucleic acid sequences. These methods have several applications ranging from agriculture to medicine. The Loop-mediated isothermal amplification (LAMP) method was first introduced by Notomi et al. Since then, different methods derived from LAMP have been extensively applied in detecting pathogens. The LAMP method is an isothermal technique that amplifies the target DNA segment using four different primers that have been uniquely designed for recognizing six distinct zones on the objective gene; the process of reaction continues at a constant temperature via a strand displacement reaction. Amplifying and detecting the targeted zone can be accomplished in one stage. Although the LAMP method is mostly used for pathogen detection, several studies have used this method for genotyping. The present article reviewed various studies that used the LAMP method for SNP detection. The outcomes indicated that the LAMP technique could be a reliable and alternative technique for genotyping. Further studies are recommended to use this approach for genotyping.

Selective cross-linking behavior of oligodeoxyribonucleotides containing 2'-O-[N-(4,5',8-trimethylpsoralen-4'-ylmethylcarbamoyl)]adenosine to mutant H-ras DNA

Point mutations are well characterized activators of oncogenes but are often indistinguishable using common gene technologies. In general, the precise sites of point-mutated oncogenes are difficult to distinguish under physiological conditions primarily because single nucleotide mismatch do not affect the annealing temperatures of DNA probes sufficiently. To address this limitation, we developed photo-responsive oligodeoxyribonucleotides containing 2'-O-[N-(4,5',8-trimethylpsoralen-4'-ylmethylcarbamoyl)]adenosine (Ps-amd-Oligo), which can be used to selectively manipulate and identify genes with point mutations. Here we present time course analyses of the photo-cross-linking efficiency of Ps-amd-Oligo with DNA and RNA and show promising selectivity for the oncogene H-ras.

Loop-mediated isothermal amplification (LAMP): Expansion of its practical application as a tool to achieve universal health coverage

Since its invention in 2000, loop-mediated isothermal amplification (LAMP) has attracted great interest from researchers and has been used as a simple and rapid diagnostic tool for detection of infectious and non-infectious diseases. Here we review the recent circumstances and outcomes of these applications of LAMP to show the potential of LAMP as a tool for achieving universal health coverage (UHC). A future application of LAMP, such as in an automated multiplex format, is also discussed.

Discrimination of haplotype in mitochondrial DNA mixtures using LNA-mediated PCR clamping

Locked nucleic acid (LNA) has been widely used for various genetic analyses, and has many benefits, in terms of the specificity or sensitivity of amplification, because LNA-containing primers/probes form more stable duplexes with template DNA than probes lacking LNA. Here, we developed a new method for discriminating HV1 haplotypes from mitochondrial DNA (mtDNA) mixtures by applying PCR clamping using LNA. PCR clamping is based on the selective inhibition of amplification using LNA-containing probes, which can discriminate single-nucleotide differences. Before designing probes, we selected 171 sequences with single-nucleotide variations from the HV1 region, and evaluated the specificity of LNA-containing probes for them by predicting Tm values. The differences of Tm between mismatched and exactly matched probe-template duplexes depended markedly on the type of LNA nucleotides for discriminating single-nucleotide differences, and the cytosine LNA nucleotide at the site of variations in the probes was most effective to discriminate these differences. For mixture analysis, each probe targeted one or two variations (16209C, 16217C, 16257A/16261T, 16297C/16298C, 16304C, 16362C, or 16362T) that are particularly common in the Japanese population, and seven designed probes completely inhibited the amplification of exactly matched templates. We prepared mixed samples by mixing DNA from two individuals at a ratio of 1:9, 1:4, 1:1, 4:1, or 9:1, and then performed Sanger sequencing analysis after PCR clamping with each probe. Our method distinguished each haplotype at lower ratios from two-person mixtures, and enabled sensitive detection at 12 pg of total DNA including 600 copies of mtDNA. Moreover, we analyzed three-person mixtures with representative sequences, and detected the minor haplotype of one individual present at a rate of 10% by adding two selected probes. The ability to discriminate haplotypes in mixed samples by using LNA-mediated PCR clamping indicates the potential value of mtDNA analysis in criminal investigations.

Detection of Ser450Leu mutation in rpoB gene of Mycobacterium tuberculosis by allele-specific loop-mediated isothermal DNA amplification method

To identify genetic mutations a rather time-consuming and expensive method of polymerase chain reaction (PCR) is widely used. The aim of the present work was to evaluate the possibility of using the two schemes of the method of allele-specific isothermal loop amplification (LAMP) to detect the TCG/TTG (S450L) mutation in the rpoB gene of Mycobacterium tuberculosis. 48 clinical isolates of M. tuberculosis and 11 samples of sputum were used, randomized and obtained in the microbiological laboratory of the city of Novosibirsk from incident patients. It is shown that the use of an analysis scheme using the allele-specific primer FIP compared to F3 has the best resolution: the difference between the amplification time of the mutation and the wild type allele was 22 ± 2,4 versus 13 ± 4,1 minutes (p = 0,0011). When using 100 DNA genomic equivalents a true positive signal (amplification of the rpoB gene with a mutation using the corresponding allele-specific primer) was detected after 29,4 ± 3,4 minutes. A positive signal was visualized after adding SYBR Green I to the reaction, both when illuminated with daylight and when using a UV transilluminator. Using the developed method the DNA sample of 20 RIFR isolates from M. tuberculosis was analyzed containing the Ser450Leu mutation in the rpoB gene, 10 RIFR isolates containing other mutations in the rpoB gene and 18 RIFs isolates without any mutations; the presence of mutations in the samples was determined using classical Sanger sequencing. The sensitivity and specificity of LAMP for detecting a Ser450Leu mutation in the rpoB gene was 100%. This approach allows the use of crude lysates of mycobacteria as DNA, which reduces the total analysis time to 1,5 hour.

Single-step, high-specificity detection of single nucleotide mutation by primer-activatable loop-mediated isothermal amplification (PA-LAMP)

Loop-mediated isothermal amplification (LAMP) is a useful platform for nucleic acids detection in point-of-care (POC) situations, and development of single-step, close-tube LAMP reactions for specific detection of single nucleotide mutations (SNMs) remains a challenge. We develop a novel primer-activatable LAMP (PA-LAMP) strategy that enables highly specific and sensitive SNM detection using single-step, close-tube reactions. This strategy designs a terminal-blocked inner primer with a ribonucleotide insertion, which is cleaved and activated specifically to perfectly matched targets by ribonuclease (RNase) H2, to realize efficient amplification of mutant genes. It has shown dynamic responses of mutant target in a linear range from 220 aM to 22 pM with a lowest detectable concentration of 22 aM. It also demonstrates very high specificity in identifying the mutant in a large excess of the wild-type with a discrimination ratio as high as ∼10,000. It has been successfully applied to mutation detection of genomic DNA in tumor cells. The PA-LAMP strategy provides a useful, portable and affordable POC platform for highly sensitive and specific detection of genetic mutations in clinical applications.

Allele-Specific Isothermal Amplification Method Using Unmodified Self-Stabilizing Competitive Primers

Rapid and specific detection of single nucleotide polymorphisms (SNPs) related to drug resistance in infectious diseases is crucial for accurate prognostics, therapeutics and disease management at point-of-care. Here, we present a novel amplification method and provide universal guidelines for the detection of SNPs at isothermal conditions. This method, called USS-sbLAMP, consists of SNP-based loop-mediated isothermal amplification (sbLAMP) primers and unmodified self-stabilizing (USS) competitive primers that robustly delay or prevent unspecific amplification. Both sets of primers are incorporated into the same reaction mixture, but always targeting different alleles; one set specific to the wild type allele and the other to the mutant allele. The mechanism of action relies on thermodynamically favored hybridization of totally complementary primers, enabling allele-specific amplification. We successfully validate our method by detecting SNPs, C580Y and Y493H, in the Plasmodium falciparum kelch 13 gene that are responsible for resistance to artemisinin-based combination therapies currently used globally in the treatment of malaria. USS-sbLAMP primers can efficiently discriminate between SNPs with high sensitivity (limit of detection of 5 × 10¹ copies per reaction), efficiency, specificity and rapidness (<35 min) with the capability of quantitative measurements for point-of-care diagnosis, treatment guidance, and epidemiological reporting of drug-resistance.

Peptide nucleic acid (PNA) probe-based analysis to detect filaggrin mutations in atopic dermatitis patients

Atopic dermatitis (AD) is a chronic inflammatory skin disease whose prevalence is increasing worldwide. Filaggrin (FLG) is essential for the development of the skin barrier, and its genetic mutations are major predisposing factors for AD. In this study, we developed a convenient and practical method to detect FLG mutations in AD patients using peptide nucleic acid (PNA) probes labelled with fluorescent markers for rapid analysis. Fluorescence melting curve analysis (FMCA) precisely identified FLG mutations based on the distinct difference in the melting temperatures of the wild-type and mutant allele. Moreover, PNA probe-based FMCA easily and accurately verified patient samples with both heterozygote and homozygote FLG mutations, providing a high-throughput method to reliable screen AD patients. Our method provides a convenient, rapid and accurate diagnostic tool to identify potential AD patients allowing for early preventive treatment, leading to lower incidence rates of AD, and reducing total healthcare expenses.

Rapid detection of CALR type 1 and type 2 mutations using PNA-LNA clamping loop-mediated isothermal amplification on a CD-like microfluidic chip

Bleeding and thrombosis represent common complications in myeloproliferative neoplasms (MPN) and significantly contribute to morbidity and mortality. Molecular markers, including CALR mutations, were considered not only as diagnostic markers, but also as risk factors for bleeding and thrombosis associated with MPN, especially for patients in remote primary hospitals. We sought to develop an easy-to-use assay for the rapid detection of CALR type 1 (CALR-1) and type 2 (CALR-2) mutations in Philadelphia chromosome-negative MPN patients. Peptide nucleic acid-locked nucleic acid (PNA-LNA) clamping loop-mediated isothermal amplification (LAMP) assays were established, which were integrated into a centrifugal compact disc (CD) microfluidic platform. A total of 158 clinical blood samples were tested simultaneously by this microfluidic platform and an in-house real time PCR assay. The detection performance of the LAMP arrays was validated and conflicting results were identified by Sanger sequencing. The results suggested that the LAMP methods we developed exhibited good sensitivity, specificity, and precision. By real time fluorescence assay the detection limit for CALR-1 and CALR-2 mutations could reach as low as 1% and 0.5% respectively, and 10% and 5% respectively by visual method. There were no nonspecific background amplifications among different detection systems. For the CALR-1 and CALR-2 LAMP detection systems, intra-batch CV values of 1% mutated plasmid were 10.56% and 10.51% respectively, and the inter-batch CV values were 19.55% and 18.39%, respectively. The products were all analyzed by melting curve analysis and electrophoresis followed by Sanger sequencing analysis, which were consistent with the database sequences. The microfluidic platform could complete rapid detection of CALR-1/2 mutations within 60 min. The results of clinical samples detected by our CD-like microfluidic chipLAMP assay and rtPCR assay suggested that 133 samples were CALR wild type, 15 were CALR-1 mutation type, and 9 were CALR-2 mutation type. The correlation coefficient value (Kendall's tau_b) of the two assays was 0.99. Interestingly, by the newly established detection platform, we were surprised to find that one patient of Chinese origin harbored both CALR-1 and CALR-2 mutations. This result was verified by Sanger sequencing analysis. The LAMP detection systems developed herein displayed good sensitivity, specificity, and stability. Additionally, the detection results could be directly judged by color changes of the reaction systems without any auxiliary equipment. Thus, the platform we developed has the potential of being widely used in remote and economically undeveloped areas in the future.

Pixelated spatial gene expression analysis from tissue

Here, we present a technique that performs on-chip picoliter real-time reverse transcriptase loop mediated isothermal amplification (RT-LAMP) reactions on a histological tissue section without any analyte purification while preserving the native spatial location of the nucleic acid molecules. We demonstrate this method by amplifying TOP2A messenger RNA (mRNA) in a prostate cancer xenograft with 100 µm spatial resolution and by visualizing the variation in threshold time of amplification across the tissue. The on-chip reaction was validated by mRNA fluorescence in situ hybridization (mFISH) from cells in the tissue section. The entire process, from tissue loading on microchip to results from RT-LAMP can be carried out in less than 2 h. We anticipate that this technique, with its ease of use, fast turnaround, and quantitative molecular outputs, would become an invaluable tissue analysis tool for researchers and clinicians in the biomedical arena.

Spatial localization of genetic information is important for tissue heterogeneity but difficult to capture with current analytical techniques. Here the authors present “Pixelated RT-LAMP”, an approach that uses parallel on-chip reactions to provide the distribution of target sequences directly from tissue.

Novel Application of Loop-mediated Isothermal Amplification for Rapid Detection of Gene Translocation

Identification of fusion genes in cancer is essential for pathological diagnosis and clinical therapy. Although methods for detection of fusion genes, such as fluorescence in situ hybridization (FISH) and real-time polymerase chain reaction (PCR), have been developed in last two decades, these methods are not ideal for detection of these genetic alterations owing to their high cost and time-consuming procedures. In this study, we developed novel application for detection of gene translocations using loop-mediated isothermal amplification (LAMP). We verified the amplified DNA products of echinoderm microtubule-associated protein-like 4 and anaplastic lymphoma kinase (EML4-ALK), synaptotagmin and synovial sarcoma, X breakpoint (SYT-SSX), and immunoglobulin heavy chain gene and B cell leukemia/lymphoma 2 (IgH/BCL2) by real-time PCR, agarose-gel electrophoresis, and the naked eye after the LAMP procedure. Fusion genes were detected in samples diluted 103 times within 60 min. Because of the advantages of rapid amplification, simple operation, and easy detection without requiring sophisticated equipment or technical skill, LAMP may have potential applications as an on-site analytical approach in hospitals for pathological diagnosis and decision making regarding appropriate therapeutic approachs.

Loop-mediated isothermal amplification (LAMP) as an alternative to PCR: A rapid on-site detection of gene doping

Innovation in medical research has been diverted at multiple occasions to enhance human performance. The predicted great progress in gene therapy has raised some concerns regarding its misuse in the world of sports (gene doping) for several years now. Even though there is no evidence that gene doping has ever been used in sports, the continuous improvement of gene therapy techniques increases the likelihood of abuse. Therefore, since 2004, efforts have been invested by the anti-doping community and WADA for the development of detection methods. Several nested PCR and qPCR-based strategies exploiting the absence of introns in the transgenic DNA have been proposed for the long-term detection of transgene in blood. Despite their great sensitivity, those protocols are hampered by limitations of the techniques that can be cumbersome and costly. The purpose of this perspective is to describe a new approach based on loop-mediated isothermal amplification (LAMP) for the detection of gene doping. This protocol enables a rapid and simple method to amplify nucleic acids with a high sensitivity and specificity and with a simple visual detection of the results. LAMP is already being used in clinical application for the detection of viruses or mutations. Therefore, this technique has the potential to be further developed for the detection of foreign genetic material in elite athletes. Copyright © 2017 John Wiley & Sons, Ltd.

Peptide Nucleic Acid-Based Biosensors for Cancer Diagnosis

The monitoring of DNA and RNA biomarkers freely circulating in the blood constitutes the basis of innovative cancer detection methods based on liquid biopsy. Such methods are expected to provide new opportunities for a better understanding of cancer disease at the molecular level, thus contributing to improved patient outcomes. Advanced biosensors can advance possibilities for cancer-related nucleic acid biomarkers detection. In this context, peptide nucleic acids (PNAs) play an important role in the fabrication of highly sensitive biosensors. This review provides an overview of recently described PNA-based biosensors for cancer biomarker detection. One of the most striking features of the described detection approaches is represented by the possibility to detect target nucleic acids at the ultra-low concentration with the capability to identify single-base mutations.

A novel diagnostic method for malaria using loop-mediated isothermal amplification (LAMP) and MinION™ nanopore sequencer

BACKGROUND

A simple and accurate molecular diagnostic method for malaria is urgently needed due to the limitations of conventional microscopic examination. In this study, we demonstrate a new diagnostic procedure for human malaria using loop mediated isothermal amplification (LAMP) and the MinION™ nanopore sequencer.

METHODS

We generated specific LAMP primers targeting the 18S-rRNA gene of all five human Plasmodium species including two P. ovale subspecies (P. falciparum, P. vivax, P. ovale wallikeri, P. ovale curtisi, P. knowlesi and P. malariae) and examined human blood samples collected from 63 malaria patients in Indonesia. Additionally, we performed amplicon sequencing of our LAMP products using MinION™ nanopore sequencer to identify each Plasmodium species.

RESULTS

Our LAMP method allowed amplification of all targeted 18S-rRNA genes of the reference plasmids with detection limits of 10-100 copies per reaction. Among the 63 clinical samples, 54 and 55 samples were positive by nested PCR and our LAMP method, respectively. Identification of the Plasmodium species by LAMP amplicon sequencing analysis using the MinION™ was consistent with the reference plasmid sequences and the results of nested PCR.

CONCLUSIONS

Our diagnostic method combined with LAMP and MinION™ could become a simple and accurate tool for the identification of human Plasmodium species, even in resource-limited situations.

Development of a highly resolved loop-mediated isothermal amplification method to detect the N526K ftsI mutation of β-lactamase-negative ampicillin-resistant Haemophilus influenzae

Rapid and easy detection of sequence polymorphisms, including nucleotide point mutations of bacterial pathogens responsible for amino acid substitutions linked to drug resistance, is essential for the proper use of antimicrobial agents. Here, a detection method using loop-mediated amplification (LAMP) combined with amplification refractory mutation system (ARMS) to accurately distinguish a different single nucleotide in the target sequence was established, named ARMS-SNP LAMP. This procedure is capable of species-specific detection of a nucleotide (1578T) in the ftsI gene on Haemophilus influenzae without amplifying the sequence carrying the point mutations (T1578G/A) in β-lactamase-negative ampicillin resistant (BLNAR) strains. Reactions were performed at 61°C for 45min. Successful target gene amplifications were detected by measuring real-time turbidity using a turbidimeter and visual detection. The assay had a detection limit of 10.0pg of genomic DNA per reaction and showed specificity against 52 types of pathogens, whereas amplifications were completely blocked in even 100.0ng/μL of genomic DNA with point mutations at T1578G and T1578A. The expected ARMS-SNP LAMP products were confirmed through identical melting curves in real-time LAMP procedures. This novel procedure was also used to analyze 57 clinical isolates of H. influenzae. All 25 clinical isolates with the naïve sequence of 1578T gave positive results. In addition, concordant negative results were obtained for 31 of the BLNAR strains with the T1578G mutation and one strain with the T1578A mutation. The ARMS-SNP LAMP method is a simple and rapid method for SNP-genotyping of a clinical isolate as point-of-care testing (POCT) technology. It is suitable for use in both resource-limited situations and well-equipped clinical settings because of its simplicity and convenience.

A novel detection procedure for mutations in the 23S rRNA gene of Mycoplasma pneumoniae with peptide nucleic acid-mediated loop-mediated isothermal amplification assay

Rapid and easy detection of a single nucleotide point mutation of bacterial genes, which is directly linked to drug susceptibility, is essential for the proper use of antimicrobial agents. Here, we established a detection method using a peptide nucleic acid mediated loop-mediated amplification (LAMP) assay for macrolide (ML)-susceptible Mycoplasma pneumoniae. This assay specifically detected the absence of missense mutations encoding the central loop of domain V in the gene encoding 23S rRNA, which can reduce the affinity for MLs and subsequently generate ML-resistant strains of M. pneumoniae. Reactions were performed at 62°C for 60min and targeted gene amplifications were detected by real-time turbidity with a turbidimeter and naked-eye inspection of a color change. The assay had an equivalent detection limit of 100.0fg of DNA with the turbidimeter and showed specificity against 54 types of pathogens, whereas amplification was completely blocked, even at 100.0pg of DNA per reaction, in the presence of point mutations at 2063A and 2064A. The expected LAMP products were confirmed through identical melting curves in real-time LAMP procedures. This method would be a simple and rapid protocol for single nucleotide polymorphism genotyping as point-of-care testing technology without amplification of the sequences carrying the point mutations 2063A and 2064A in ML-resistant M. pneumoniae strains.

Wild‑type blocking pcr coupled with internal competitive amplified fragment improved the detection of rare mutation of KRAS

Mutant KRAS proto-oncogene GTPase (KRAS) serves an important role in predicting the development, diagnosis, treatment and efficacy of targeted drug therapies for colorectal cancer. To improve the detection efficacy of trace amount of mutant KRAS, the locked nucleic acid-based method was modified in the present study. Internal competitive amplification fragments were used to improve the inhibition of wild-type KRAS with a wild-type blocking (WTB) probe and specifically amplify the trace amounts of mutant KRAS. The modified method, quantitative clamp-based polymerase chain reaction technology using WTB coupled with internal competitive reference to enhance the amplification specificity, named WIRE-PCR, completely blocked the amplification of wild-type KRAS in 50–150 ng DNA templates. The added internal competitive amplified fragments were amplified together with the target gene, which were used to reduce base mismatch due to the high number of cycles in PCR and quantify the total amount of DNA. The results demonstrated that WIRE-PCR facilitated the detection of mutated alleles at a single molecular level. In the colorectal biopsies from 50 patients with suspected colorectal cancer, 18 cases (36%) contained mutant KRAS, and the amount of mutant DNA accounted for 18.6–64.2% of the total DNA. WIRE-PCR is a simple, rapid and low-cost quantitative analysis method for the detection of trace amounts of the mutant KRAS.