Three-dimensional (3D) brain microphysiological system for organophosphates and neurochemical agent toxicity screening

Effects of the nerve agent VX on hiPSC-derived motor neurons

Poisoning with the organophosphorus nerve agent VX can be life-threatening due to limitations of the standard therapy with atropine and oximes. To date, the underlying pathomechanism of VX affecting the neuromuscular junction has not been fully elucidated structurally. Results of recent studies investigating the effects of VX were obtained from cells of animal origin or immortalized cell lines limiting their translation to humans. To overcome this limitation, motor neurons (MN) of this study were differentiated from in-house feeder- and integration-free-derived human-induced pluripotent stem cells (hiPSC) by application of standardized and antibiotic-free differentiation media with the aim to mimic human embryogenesis as closely as possible. For testing VX sensitivity, MN were initially exposed once to 400 µM, 600 µM, 800 µM, or 1000 µM VX and cultured for 5 days followed by analysis of changes in viability and neurite outgrowth as well as at the gene and protein level using µLC-ESI MS/HR MS, XTT, IncuCyte, qRT-PCR, and Western Blot. For the first time, VX was shown to trigger neuronal cell death and decline in neurite outgrowth in hiPSC-derived MN in a time- and concentration-dependent manner involving the activation of the intrinsic as well as the extrinsic pathway of apoptosis. Consistent with this, MN morphology and neurite network were altered time and concentration-dependently. Thus, MN represent a valuable tool for further investigation of the pathomechanism after VX exposure. These findings might set the course for the development of a promising human neuromuscular test model and patient-specific therapies in the future.

Cortical spheroid on perfusable microvascular network in a microfluidic device

Human induced pluripotent stem cell (hiPSC)-derived brain spheroids can recapitulate the complex cytoarchitecture of the brain, as well as the genetic/epigenetic footprint of human brain development. However, hiPSC-derived 3D models such as spheroid and organoids does not have a perfusable microvascular network, which plays a vital role in maintaining homeostasis in vivo. With the critical balance of positive and negative angiogenic modulators, 3D microvascular network can be achieved by angiogenesis. This paper reports on a microfluidic-based three-dimensional, cortical spheroid grafted on the vascular-network. Vascular network was formed by inducing angiogenic sprouting using concentration gradient-driven angiogenic factors in the microfluidic device. We investigate critical factors for angiogenic vascular network formation with spheroid placement, including 1) a PKCα activator, phorbol-12-myristate-13-acetate (PMA); 2) orientation of endothelial cells under perfusion and permeability of vascular network; 3) effect of extracellular matrix (ECM) types and their densities on angiogenesis; and 4) integration with cortical spheroid on vascular network. This paper demonstrates proof of concept for the potential utility of a membrane-free in vitro cortical spheroid tissue construct with perfusable microvascular network that can be scaled up to a high throughput platform. It can provide a cost-effective alternative platform to animal testing by modeling brain diseases and disorders, and screening drugs.

The suitability of a polydimethylsiloxane-based (PDMS) microfluidic two compartment system for the toxicokinetic analysis of organophosphorus compounds

Organ-on-a-chip platforms are an emerging technology in experimental and regulatory toxicology (species-specific differences, ethical considerations). They address gaps between in vivo and in vitro models. However, there are still certain limitations considering material, setup and applicability. The current study examined the suitability of a commercially available polydimethylsiloxane-based (PDMS) organ-chip for the toxicokinetic characterization of the highly toxic nerve agent VX and the organophosphate pesticide parathion. The respective concentrations of 1000 µmol/L and 100 µmol/L VX and parathion were chosen deliberately high in order to study concentrations even if high compound absorption by PDMS might occur. Neuronal and liver spheroids, totaling 2 × 106 cells were used to study concentration changes of VX and parathion. In addition, VX enantiomers were quantified. The current study suggests a significant absorption of VX, respectively parathion by PDMS. This might require future investigation of alternative materials or coatings to limit absorption for organophosphorus compounds in toxicokinetic studies.

Towards Novel Biomimetic In Vitro Models of the Blood-Brain Barrier for Drug Permeability Evaluation

Current available animal and in vitro cell-based models for studying brain-related pathologies and drug evaluation face several limitations since they are unable to reproduce the unique architecture and physiology of the human blood-brain barrier. Because of that, promising preclinical drug candidates often fail in clinical trials due to their inability to penetrate the blood-brain barrier (BBB). Therefore, novel models that allow us to successfully predict drug permeability through the BBB would accelerate the implementation of much-needed therapies for glioblastoma, Alzheimer's disease, and further disorders. In line with this, organ-on-chip models of the BBB are an interesting alternative to traditional models. These microfluidic models provide the necessary support to recreate the architecture of the BBB and mimic the fluidic conditions of the cerebral microvasculature. Herein, the most recent advances in organ-on-chip models for the BBB are reviewed, focusing on their potential to provide robust and reliable data regarding drug candidate ability to reach the brain parenchyma. We point out recent achievements and challenges to overcome in order to advance in more biomimetic in vitro experimental models based on OOO technology. The minimum requirements that should be met to be considered biomimetic (cellular types, fluid flow, and tissular architecture), and consequently, a solid alternative to in vitro traditional models or animals.

From cells to organoids: The evolution of blood-brain barrier technology for modelling drug delivery in brain cancer

Brain cancer remains the deadliest cancer. The blood-brain barrier (BBB) is impenetrable to most drugs and is a complex 3D network of multiple cell types including endothelial cells, astrocytes, and pericytes. In brain cancers, the BBB becomes disrupted during tumor progression and forms the blood-brain tumor barrier (BBTB). To advance therapeutic development, there is a critical need for physiologically relevant BBB in vitro models. 3D cell systems are emerging as valuable preclinical models to accelerate discoveries for diseases. Given the versatility and capability of 3D cell models, their potential for modelling the BBB and BBTB is reviewed. Technological advances of BBB models and challenges of in vitro modelling the BBTB, and application of these models as tools for assessing therapeutics and nano drug delivery, are discussed. Quantitative, in vitro BBB models that are predictive of effective brain cancer therapies will be invaluable for accelerating advancing new treatments to the clinic.

An Overview of Physiologically-Based Pharmacokinetic Models for Forensic Science

A physiologically-based pharmacokinetic (PBPK) model represents the structural components of the body with physiologically relevant compartments connected via blood flow rates described by mathematical equations to determine drug disposition. PBPK models are used in the pharmaceutical sector for drug development, precision medicine, and the chemical industry to predict safe levels of exposure during the registration of chemical substances. However, one area of application where PBPK models have been scarcely used is forensic science. In this review, we give an overview of PBPK models successfully developed for several illicit drugs and environmental chemicals that could be applied for forensic interpretation, highlighting the gaps, uncertainties, and limitations.

A 3D Bioprinted in vitro Model of Neuroblastoma Recapitulates Dynamic Tumor-Endothelial Cell Interactions Contributing to Solid Tumor Aggressive Behavior

Neuroblastoma (NB) is the most common extracranial tumor in children resulting in substantial morbidity and mortality. A deeper understanding of the NB tumor microenvironment (TME) remains an area of active research but there is a lack of reliable and biomimetic experimental models. This study utilizes a 3D bioprinting approach, in combination with NB spheroids, to create an in vitro vascular model of NB for exploring the tumor function within an endothelialized microenvironment. A gelatin methacryloyl (gelMA) bioink is used to create multi-channel cubic tumor analogues with high printing fidelity and mechanical tunability. Human-derived NB spheroids and human umbilical vein endothelial cells (HUVECs) are incorporated into the biomanufactured gelMA and cocultured under static versus dynamic conditions, demonstrating high levels of survival and growth. Quantification of NB-EC integration and tumor cell migration suggested an increased aggressive behavior of NB when cultured in bioprinted endothelialized models, when cocultured with HUVECs, and also as a result of dynamic culture. This model also allowed for the assessment of metabolic, cytokine, and gene expression profiles of NB spheroids under varying TME conditions. These results establish a high throughput research enabling platform to study the TME-mediated cellular-molecular mechanisms of tumor growth, aggression, and response to therapy.

A Three-Dimensional Brain-on-a-Chip Using Human iPSC-Derived GABAergic Neurons and Astrocytes

Brain-on-a-chip is a miniaturized engineering platform to mimic the structural and functional aspects of brain tissue. We describe a method to construct a three-dimensional (3D) brain-on-a-chip in this chapter. We firstly portray the method of a brain-on-a-chip model with cocultured mice neurons, microglia, and astrocytes to mimic brain tissue and membrane-free perfusion with endothelial cells, in which we successfully build the blood-brain barrier to screen neurotoxicity. Then we describe a method to construct a brain-on-a-chip with human induced pluripotent stem cell (iPSC)-derived neurons and astrocytes to simulate human brain behavior. This platform consists of neuronal tissue with extracellular matrix (ECM)-embedded GABAergic neurons and astrocytes and a perfusion channel with dynamic flow. We also include the broader applicability test of this model using an organophosphate (OP), malathion, to induce acute and chronic neurotoxicity, and then using butyrylcholinesterase (BuChE) as an exogenous bioscavenger of OP. Following the methods listed in this chapter, we are able to measure the neurotoxic effects on construct integrity, viability, and total AChE and BuChE activity.

Microphysiological Systems: Stakeholder Challenges to Adoption in Drug Development

Microphysiological systems (MPS) or tissue chips/organs-on-chips are novel in vitro models that emulate human physiology at the most basic functional level. In this review, we discuss various hurdles to widespread adoption of MPS technology focusing on issues from multiple stakeholder sectors, e.g., academic MPS developers, commercial suppliers of platforms, the pharmaceutical and biotechnology industries, and regulatory organizations. Broad adoption of MPS technology has thus far been limited by a gap in translation between platform developers, end-users, regulatory agencies, and the pharmaceutical industry. In this brief review, we offer a perspective on the existing barriers and how end-users may help surmount these obstacles to achieve broader adoption of MPS technology.

The Combination of Cell Cultured Technology and In Silico Model to Inform the Drug Development

Human-derived in vitro models can provide high-throughput efficacy and toxicity data without a species gap in drug development. Challenges are still encountered regarding the full utilisation of massive data in clinical settings. The lack of translated methods hinders the reliable prediction of clinical outcomes. Therefore, in this study, in silico models were proposed to tackle these obstacles from in vitro to in vivo translation, and the current major cell culture methods were introduced, such as human-induced pluripotent stem cells (hiPSCs), 3D cells, organoids, and microphysiological systems (MPS). Furthermore, the role and applications of several in silico models were summarised, including the physiologically based pharmacokinetic model (PBPK), pharmacokinetic/pharmacodynamic model (PK/PD), quantitative systems pharmacology model (QSP), and virtual clinical trials. These credible translation cases will provide templates for subsequent in vitro to in vivo translation. We believe that synergising high-quality in vitro data with existing models can better guide drug development and clinical use.

Microphysiological systems: What it takes for community adoption

Microphysiological systems (MPS) are promising in vitro tools which could substantially improve the drug development process, particularly for underserved patient populations such as those with rare diseases, neural disorders, and diseases impacting pediatric populations. Currently, one of the major goals of the National Institutes of Health MPS program, led by the National Center for Advancing Translational Sciences (NCATS), is to demonstrate the utility of this emerging technology and help support the path to community adoption. However, community adoption of MPS technology has been hindered by a variety of factors including biological and technological challenges in device creation, issues with validation and standardization of MPS technology, and potential complications related to commercialization. In this brief Minireview, we offer an NCATS perspective on what current barriers exist to MPS adoption and provide an outlook on the future path to adoption of these in vitro tools.

Honing the Double-Edged Sword: Improving Human iPSC-Microglia Models

Human induced Pluripotent Stem Cell (hiPSC) models are a valuable new tool for research into neurodegenerative diseases. Neuroinflammation is now recognized as a key process in neurodegenerative disease and aging, and microglia are central players in this. A plethora of hiPSC-derived microglial models have been published recently to explore neuroinflammation, ranging from monoculture through to xenotransplantation. However, combining physiological relevance, reproducibility, and scalability into one model is still a challenge. We examine key features of the in vitro microglial environment, especially media composition, extracellular matrix, and co-culture, to identify areas for improvement in current hiPSC-microglia models.

Inhibition of Acetylcholinesterase by Wood Creosote and Simple Phenolic Compounds

Anisakiasis is common in countries where raw or incompletely cooked marine fish are consumed. Currently, effective therapeutic methods to treat anisakiasis are unavailable. A recent study found that wood creosote inactivates the movement of Anisakis species. Essential oil of Origanum compactum containing carvacrol and thymol, which are similar to the constituents of wood creosote, was reported to inactivate Anisakis by inhibiting its acetylcholinesterase. We examined whether wood creosote can also inhibit acetylcholinesterase. We examined the effect of components of wood creosote using the same experimental method. A computer simulation experiment (molecular docking) was also performed. Here, we demonstrate that wood creosote inactivated acetylcholinesterase in a dose-dependent manner with an IC₅₀ of 0.25 mg/mL. Components of wood creosote were also tested individually: 5-methylguaiacol, p-cresol, guaiacol, o-cresol, 2,4-dimethylphenol, m-cresol, phenol and 4-methylguaiacol inactivated the enzyme with an IC₅₀ of 14.0, 5.6, 17.0, 6.3, 3.9, 10.0, 15.2 and 27.2 mM, respectively. The mechanism of acetylcholinesterase inactivation was analyzed using a computer-based molecular docking simulation, which employed a three-dimensional structure of acetylcholinesterase and above phenolic compounds as docking ligands. The simulation indicated that the phenolic compounds bind to the active site of the enzyme, thereby competitively blocking entry of the substrate acetylcholine. These findings suggest that the mechanism for the inactivation of Anisakis movement by wood creosote is due to inhibition of acetylcholinesterase needed for motor neuron activity.

Emerging Neuroblastoma 3D In Vitro Models for Pre-Clinical Assessments

The potential of tumor three-dimensional (3D) in vitro models for the validation of existing or novel anti-cancer therapies has been largely recognized. During the last decade, diverse in vitro 3D cell systems have been proposed as a bridging link between two-dimensional (2D) cell cultures and in vivo animal models, both considered gold standards in pre-clinical settings. The latest awareness about the power of tailored therapies and cell-based therapies in eradicating tumor cells raises the need for versatile 3D cell culture systems through which we might rapidly understand the specificity of promising anti-cancer approaches. Yet, a faithful reproduction of the complex tumor microenvironment is demanding as it implies a suitable organization of several cell types and extracellular matrix components. The proposed 3D tumor models discussed here are expected to offer the required structural complexity while also assuring cost-effectiveness during pre-selection of the most promising therapies. As neuroblastoma is an extremely heterogenous extracranial solid tumor, translation from 2D cultures into innovative 3D in vitro systems is particularly challenging. In recent years, the number of 3D in vitro models mimicking native neuroblastoma tumors has been rapidly increasing. However, in vitro platforms that efficiently sustain patient-derived tumor cell growth, thus allowing comprehensive drug discovery studies on tailored therapies, are still lacking. In this review, the latest neuroblastoma 3D in vitro models are presented and their applicability for a more accurate prediction of therapy outcomes is discussed.

Microphysiological Systems for Neurodegenerative Diseases in Central Nervous System

Neurodegenerative diseases are among the most severe problems in aging societies. Various conventional experimental models, including 2D and animal models, have been used to investigate the pathogenesis of (and therapeutic mechanisms for) neurodegenerative diseases. However, the physiological gap between humans and the current models remains a hurdle to determining the complexity of an irreversible dysfunction in a neurodegenerative disease. Therefore, preclinical research requires advanced experimental models, i.e., those more physiologically relevant to the native nervous system, to bridge the gap between preclinical stages and patients. The neural microphysiological system (neural MPS) has emerged as an approach to summarizing the anatomical, biochemical, and pathological physiology of the nervous system for investigation of neurodegenerative diseases. This review introduces the components (such as cells and materials) and fabrication methods for designing a neural MPS. Moreover, the review discusses future perspectives for improving the physiological relevance to native neural systems.

Three-dimensional brain-on-chip model using human iPSC-derived GABAergic neurons and astrocytes: Butyrylcholinesterase post-treatment for acute malathion exposure

Organophosphates (OPs) induce acute and chronic neurotoxicity, primarily by inhibiting acetylcholinesterase (AChE) activity as well as by necrosis, and apoptosis. Butyrylcholinesterase (BuChE), an exogenous bioscavenger of OPs, can be used as a treatment for OP exposure. It is prerequisite to develop in vitro brain models that can study BuChE post-treatment for acute OP exposure. In this study, we developed a three-dimensional (3D) brain-on-chip platform with human induced pluripotent stem cell (iPSC)-derived neurons and astrocytes to simulate human brain behavior. The platform consists of two compartments: 1) a hydrogel embedded with human iPSC-derived GABAergic neurons and astrocytes and 2) a perfusion channel with dynamic medium flow. The brain tissue constructs were exposed to Malathion (MT) at various concentrations and then treated with BuChE after 20 minutes of MT exposure. Results show that the iPSC-derived neurons and astrocytes directly interacted and formed synapses in the 3D matrix, and that treatment with BuChE improved viability after MT exposure up to a concentration of 10⁻³ M. We conclude that the 3D brain-on-chip platform with human iPSC-derived brain cells is a suitable model to study the neurotoxicity of OP exposure and evaluate therapeutic compounds for treatment.