Homogenization of initial cell distribution by secondary flow of medium improves cell culture efficiency

Titanium Culture Vessel Presenting Temperature Gradation for the Thermotolerance Estimation of Cells

Hyperthermia can be induced to exploit the thermal intolerance of cancer cells, which is worse than that of normal cells, as a potential noninvasive cancer treatment. To develop an effective hyperthermia treatment, thermal cytotoxicity of cells should be comprehensively investigated. However, to conduct such investigations, the culture temperature must be accurately regulated. We previously reported a culture system in which the culture temperature could be accurately regulated by employing metallic culture vessels. However, appropriate temperature conditions for hyperthermia depend on the cell species. Consequently, several experiments need to be conducted, which is a bottleneck of inducing hyperthermia. Hence, we developed a cell culture system with temperature gradation on a metallic culture surface. Michigan Cancer Foundation-7 cells and normal human dermal fibroblasts were used as cancer and normal cell models, respectively. Normal cells showed stronger thermal tolerance; this was because the novel system immediately exhibited a temperature gradation. Thus, the developed culture system can be used to investigate the optimum thermal conditions for effective hyperthermia treatment. Furthermore, as the reactions of cultured cells can be effectively assessed with the present results, further research involving the thermal stimulation of cells is possible.

Development of accurate temperature regulation culture system with metallic culture vessel demonstrates different thermal cytotoxicity in cancer and normal cells

Hyperthermia has been studied as a noninvasive cancer treatment. Cancer cells show stronger thermal cytotoxicity than normal cells, which is exploited in hyperthermia. However, the absence of methods evaluating the thermal cytotoxicity in cells prevents the development of hyperthermia. To investigate the thermal cytotoxicity, culture temperature should be regulated. We, thus, developed a culture system regulating culture temperature immediately and accurately by employing metallic culture vessels. Michigan Cancer Foundation-7 cells and normal human dermal fibroblasts were used for models of cancer and normal cells. The findings showed cancer cells showed stronger thermal cytotoxicity than normal cells, which is quantitatively different from previous reports. This difference might be due to regulated culture temperature. The thermal stimulus condition (43 °C/30 min) was, further, focused for assays. The mRNA expression involving apoptosis changed dramatically in cancer cells, indicating the strong apoptotic trend. In contrast, the mRNA expression of heat shock protein (HSP) of normal cells upon the thermal stimulus was stronger than cancer cells. Furthermore, exclusively in normal cells, HSP localization to nucleus was confirmed. These movement of HSP confer thermotolerance to cells, which is consistent with the different thermal cytotoxicity between cancer and normal cells. In summary, our developed system can be used to develop hyperthermia treatment.

Acoustic streaming induced by MHz-frequency ultrasound extends the volume limit of cell suspension culture

Large-scale cell suspension culture technology opens up opportunities for numerous medical and bioengineering applications. For these purposes, scale-up of the culture system is paramount. For initial small-scale culture, a simple static suspension culture (SSC) is generally employed. However, cell sedimentation due to the lack of agitation limits the culture volume feasible for SSC. Thus, when scaling up, cell suspensions must be manually transferred from the culture flask to another vessel suitable for agitation, which increases the risk of contamination and human error. Ideally, the number of culture transfer steps should be kept to a minimum. The present study describes the fabrication of an ultrasonic suspension culture system that stirs cell suspensions with the use of acoustic streaming generated by ultrasound irradiation at a MHz frequency. This system was applied to 100-mL suspension cultures of Chinese hamster ovary cells-a volume ten-fold larger than that generally used. The cell proliferation rate in this system was 1.88/day when applying an input voltage of 40 V to the ultrasonic transducer, while that of the SSC was 1.14/day. Hence, the proposed method can extend the volume limit of static cell suspension cultures, thereby reducing the number of cell culture transfer steps.

Suspension culture in a T-flask with acoustic flow induced by ultrasonic irradiation

Suspension culture is an essential large-scale cell culture technique for biopharmaceutical development and regenerative medicine. To transition from monolayer culture on the culture surface of a flask to suspension culture in a bioreactor, a pre-specified cell number must first be reached. During this period of preparation for suspension culture, static suspension culture in a flask is generally performed because the medium volume is not large enough to use a paddle to circulate the medium. However, drawbacks to this static method include cell sedimentation, leading to high cell density near the bottom and resulting in oxygen and nutrient deficiencies. Here, we propose a suspension culture method with acoustic streaming induced by ultrasonic waves in a T-flask to create a more homogeneous distribution of oxygen, nutrients, and waste products during the preparation period preceding large-scale suspension culture in a bioreactor. To demonstrate the performance of the ultrasonic method, Chinese hamster ovary cells were cultured for 72 h. Results showed that, on average, the cell proliferation was improved by 40% compared with the static method. Thus, the culture time required to achieve a 1000-fold increase could be reduced by 32 h (a 14% reduction) compared with the static method. Furthermore, the ultrasonic irradiation did not compromise the metabolic activity of the cells cultured using the ultrasonic method. These results demonstrate the effectiveness of the ultrasonic method for accelerating the transition to large-scale suspension culture.

Detachment of RAW264.7 macrophages from a culture dish using ultrasound excited by a Langevin transducer

To study the relationship between macrophages and antigens, an efficient culture method for macrophages is important. During culture, macrophages adhering to the culture surface are difficult to harvest by general trypsinization. Thus, prolonged trypsinization or cell scraping has been used to detach macrophages. However, prolonged trypsinization has a negative effect on cell viability, and the detachment efficiency with cell scrapers depends highly on the skill of a technician. Therefore, we developed a macrophage-detaching method by combining trypsin-EDTA and ultrasonic vibration to detach cells from a ubiquitous culture vessel. We fabricated a device that propagated ultrasound to a φ-35-mm culture dish from underneath. To demonstrate our concept, RAW264.7 cells were used as model cells and exposed to several detaching conditions to evaluate the effects of our developed method. In addition to the proposed method, as traditional detaching methods, simple trypsinization with trypsin-EDTA and manual cell scraping were performed. Furthermore, to determine the optimal intensity of the ultrasound, input voltages into the ultrasound transducer of 200, 225, and 250 V were used. As a result, the number of live cells detached by the developed method with an input amplitude of 225 V was approximately 4.8 times more than that by simple trypsinization and approximately 4.3 times more than that by scraping. Furthermore, the proliferation and phagocytosis level of the cells were increased by the developed method at 225 V, while no significant difference was found in metabolism. Thus, the developed method improves culture efficiency and cell functions without causing metabolic disorders.