Multicenter international assessment of a SARS-CoV-2 RT-LAMP test for point of care clinical application

Development and field validation of a reverse transcription loop-mediated isothermal amplification assay (RT-LAMP) for the rapid detection of chikungunya virus in patient and mosquito samples

OBJECTIVES

We aimed to develop a reverse transcription loop-mediated isothermal amplification (RT-LAMP) platform for the rapid detection of chikungunya virus (CHIKV) in both patient and mosquito samples from Brazil.

METHODS

We optimized an RT-LAMP assay and then evaluated the specificity and sensitivity using visual detection. In comparison with the RT-qPCR reference method, we validated the utility of this assay as a molecular diagnostic test in a reference laboratory for arbovirus diagnostics using 100 serum samples collected from suspected CHIKV cases.

RESULTS

Our RT-LAMP assay specifically detected CHIKV without cross-reactivity against other arboviruses. The limit of detection of our RT-LAMP was estimated in -1.18 PFU (confidence interval [CI] ranging from -2.08 to 0.45), resulting in a similar analytical sensitivity when directly compared with the reference standard RT-qPCR assay. Then, we demonstrate the ability of our RT-LAMP assay to detect the virus in different human specimens (serum, urine, and saliva), and crude lysate of Aedes aegypti mosquitoes in as little as 20-30 minutes and without a separate RNA isolation step. Lastly, we showed that our RT-LAMP assay could be lyophilized and reactivated by adding water, indicating potential for room-temperature storage. Our RT-LAMP had a clinical sensitivity of 100% (95% CI, 90.97-100.00%), clinical specificity of 96.72% (95% CI, 88.65-99.60%), and overall accuracy of 98.00% (95% CI, 92.96-99.76%).

DISCUSSION

Taken together, these findings indicate that the RT-LAMP assay reported here solves important practical drawbacks to the deployment of molecular diagnostics in the field and can be used to improve testing capacity, particularly in low- and middle-income countries.

Clinical and laboratory diagnosis of Mayaro virus (MAYV): Current status and opportunities for further development

The recent outbreaks related to Mayaro virus (MAYV) infection in the Americas have brought this neglected virus as a potential threat to global public health. Given the range of symptoms that can be associated with MAYV infection, it can be challenging to diagnose individuals based on clinical signs, especially in countries with simultaneous circulation of other mosquito-borne viruses, such as dengue virus (DENV) and chikungunya virus (CHIKV). With this challenge in mind, laboratory-based diagnosis assumes a critical role in the introduction of measures to help prevent virus dissemination and to adequately treat patients. In this review, we provide an overview of the clinical features reported in infected patients and currently available laboratory tools that are used for MAYV diagnosis, discussing their advances, advantages, and limitations to apply in the field. Moreover, we explore novel point-of-care (PoC) diagnostic platforms that can provide de-centralised diagnostics for use in areas with limited laboratory infrastructure.

Quantitative mRNA expression measurement at home

mRNA measurement is dominated by RT-PCR, which requires expensive laboratory equipment and personnel with advanced degrees. Loop-mediated isothermal amplification (LAMP) is a versatile technique for detecting target DNA and RNA. The sensitivity of LAMP in early reports has been below that of the standard RT-PCR tests. Here, we report the use of a fluorescence-based RT-LAMP protocol to measure CDX2 expression patterns, which match extremely well to the standards of sophisticated RT-PCR techniques (r = 0.99, p < 0.001). The assay works on diverse sample types such as cDNA, mRNA, and direct tissue sample testing in 25 min compared to more than 3 h for RT-PCR. We have developed a new protocol for designing RT-LAMP primers that reduce false positives due to self-amplification and improve quantification. A simple device with a 3D-printed box enables the measurement of mRNA expression at home, outdoors, and point-of-care setting.

Polymerase chain reaction-positivity and predictors for SARS-CoV-2 infection among diagnosed cases' in North West Ethiopia

Background

The lack of sophisticated diagnosing equipment for polymerase chain reaction (PCR) during the incidence of variant types of COVID-19 underestimates the morbidity and mortality patterns of this pandemic. Thus, this study aimed to estimate seropositive and confirmatory predictors for COVID-19 suspected and tested cases through polymerase chain reaction (RT-PCR) in two diagnosing.

Methods

A facility-based descriptive cross-sectional study was employed among COVID-19 suspected cases from January 2, 2022, to June 9, 2022. The data were collected both using a structured interviewees and nasopharyngeal (NP) swabs. The nasal swab (NS) was analyzed in the laboratory for RNA detection of the virus using PCR. The collected data were entered into Epi Data version 4.2 and then exported to STATA (SE) version R-14 software for further analysis. multivariable logistic regression was used to assess the associated risk.

Results

A total of 285 suspected cases have participated in this study. The overall mean (±SD) age of the participants was 37.5 (±18.5) years. The majority, 174 (61.1%) of the tested groups were symptomatic when diagnosed. The positivity of RT-PCR for suspected and COVID-19 diagnosed cases were confirmed in 62/285 (21.75%). In multivariable analysis, they were aged 26-50 years (adjusted odds ratio [AOR] = 4.2, 95% confidence interval [CI] = 1.5-10.75), had comorbidity (AOR = 5.8; 95% CI = 2.1-12.2), and cigarette smokers (AOR = 13.5; 95% CI = 5.3-36.6) were significantly associated with developing COVID-19 infection.

Conclusion

More than two in every nine suspected cases were positive RT-PCR tests, and the infectivity of COVID-19 was significantly associated with age 25-50 years, comorbidities, and cigarette smoking. The deployment of high-quality diagnostic kits like RT-PCR is crucial for the early detection and risk stratification of suspected cases.

PATHPOD - A loop-mediated isothermal amplification (LAMP)-based point-of-care system for rapid clinical detection of SARS-CoV-2 in hospitals in Denmark

Sensitive and rapid detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has been a vital goal in the ongoing COVID-19 pandemic. We present in this comprehensive work, for the first time, detailed fabrication and clinical validation of a point of care (PoC) device for rapid, onsite detection of SARS-CoV-2 using a real-time reverse-transcription loop-mediated isothermal amplification (RT-LAMP) reaction on a polymer cartridge. The PoC system, namely PATHPOD, consisting of a standalone device (weight less than 1.2 kg) and a cartridge, can perform the detection of 10 different samples and two controls in less than 50 min, which is much more rapid than the golden standard real-time reverse-transcription Polymerase Chain Reaction (RT-PCR), typically taking 16-48 h. The novel total internal reflection (TIR) scheme and the reactions inside the cartridge in the PoC device allow monitoring of the diagnostic results in real-time and onsite. The analytical sensitivity and specificity of the PoC test are comparable with the current RT-PCR, with a limit of detection (LOD) down to 30-50 viral genome copies. The robustness of the PATHPOD PoC system has been confirmed by analyzing 398 clinical samples initially examined in two hospitals in Denmark. The clinical sensitivity and specificity of these tests are discussed.

A fully integrated duplex RT-LAMP device for the detection of viral infections

Respiratory viruses can cause epidemics or pandemics, which are worldwide outbreaks of disease. The severity of these events varies depending on the virus, its characteristics, along with environmental factors. The frequency of epidemics and pandemics caused by respiratory viruses is difficult to predict, but the potential severity of such events underlines the importance of continued monitoring, research, and preparation for emerging infectious diseases. To help improve pandemic preparedness, we created a fully integrated duplex reverse transcription loop-mediated isothermal amplification (RT-LAMP) device targeting two respiratory viruses, influenza A/X-31 virus and bovine coronavirus, as a replacement for SARS-CoV-2. This device can be adapted to any other respiratory virus. In this study, we showed and evaluated a prototype of a microfluidic system, and showed that duplex RT-LAMP can detect and distinguish between the two viruses, with LoDs of 2,000 copies/ml for bovine coronavirus and 200 copies/ml for influenza A/X-31 virus.

Clinical and laboratory diagnosis of monkeypox (mpox): Current status and future directions

The emergence and rapid spread of the monkeypox virus (MPXV) to non-endemic countries has brought this once obscure pathogen to the forefront of global public health. Given the range of conditions that cause similar skin lesions, and because the clinical manifestation may often be atypical in the current mpox outbreak, it can be challenging to diagnose patients based on clinical signs and symptoms. With this perspective in mind, laboratory-based diagnosis assumes a critical role for the clinical management, along with the implementation of countermeasures. Here, we review the clinical features reported in mpox patients, the available laboratory tests for mpox diagnosis, and discuss the principles, advances, advantages, and drawbacks of each assay. We also highlight the diagnostic platforms with the potential to guide ongoing clinical response, particularly those that increase diagnostic capacity in low- and middle-income countries. With the outlook of this evolving research area, we hope to provide a resource to the community and inspire more research and the development of diagnostic alternatives with applications to this and future public health crises.

Development of loop-mediated isothermal amplification (LAMP) assays using five primers reduces the false-positive rate in COVID-19 diagnosis

The reverse-transcription loop-mediated isothermal amplification (RT-LAMP) is a cheaper and faster testing alternative for detecting SARS-CoV-2. However, a high false-positive rate due to misamplification is one of the major limitations. To overcome misamplifications, we developed colorimetric and fluorometric RT-LAMP assays using five LAMP primers, instead of six. The gold-standard RT-PCR technique verified the assays' performance. Compared to other primer sets with six primers (N, S, and RdRp), the E-ID1 primer set, including five primers, performed superbly on both colorimetric and fluorometric assays. The sensitivity of colorimetric and fluorometric assays was 89.5% and 92.2%, respectively, with a limit of detection of 20 copies/µL. The colorimetric RT-LAMP had a specificity of 97.2% and an accuracy of 94.5%, while the fluorometric RT-LAMP obtained 99% and 96.7%, respectively. No misamplification was evident even after 120 min, which is crucial for the success of this technique. These findings are important to support the use of RT-LAMP in the healthcare systems in fighting COVID-19.

Efficient multiplexing and variant discrimination in reverse-transcription loop-mediated isothermal amplification with sequence-specific hybridization probes

Loop-mediated isothermal amplification (LAMP) has proven a robust and reliable nucleic acid amplification method that is well suited for simplified and rapid molecular diagnostics. Various approaches have emerged for sequence-specific detection of LAMP products, but with limitations to their widespread utility or applicability for single-nucleotide polymorphism detection and multiplexing. Here we demonstrate the use of simple hybridization probes (as used for qPCR) that enable simple multiplexing and SARS-CoV-2 variant typing in reverse-transcription LAMP. This approach requires no modification to the LAMP primers and is amenable to the detection of single-nucleotide polymorphisms and small sequence changes, which is usually difficult in LAMP. By extending LAMP’s ability to be utilized for multitarget and single-base change detection, we hope to increase its potential to enable more and better molecular diagnostic testing.

SARS-CoV-2 detection methods: A comprehensive review

The ongoing novel COVID-19 has remained the center of attention, since its declaration as a pandemic in March 2020, due to its rapid and uncontrollable worldwide spread. Diagnostic tests are the first line of defense against the transmission of this infectious disease among individuals, with reverse-transcription quantitative polymerase chain reaction (RT-qPCR) being the approved gold standard for showing high sensitivity and specificity in detecting SARS-CoV-2. However, alternative tests are being invested due to the global demand for facilities, reagents, and healthcare workers needed for rapid population-based testing. Also, the rapid evolution of the viral genome and the emergence of new variants necessitates updating the existing methods. Scientists are aiming to improve tests to be affordable, simple, fast, and at the same time accurate, and efficient, as well as friendly user testing. The current diagnostic methods are either molecular-based that detect nucleic acids abundance, like RT-qPCR and reverse-transcription loop-mediated isothermal amplification (RT-LAMP); or immunologically based that detect the presence of antigens or antibodies in patients’ specimens, like enzyme-linked immunosorbent assay (ELISA), lateral flow assay (LFA), chemiluminescent immunoassay (CLIA), and neutralization assay. In addition to these strategies, sensor-based or CRISPR applications are promising tools for the rapid detection of SARS-CoV-2. This review summarizes the most recent updates on the SARS-CoV-2 detection methods with their limitations. It will guide researchers, epidemiologists, and clinicians in identifying a more rapid, reliable, and sensitive method of diagnosing SARS-CoV-2 including the most recent variant of concern Omicron.

Development and Validation of Reverse Transcriptase Loop-Mediated Isothermal Amplification (RT-LAMP) as a Simple and Rapid Diagnostic Tool for SARS-CoV-2 Detection

Since the COVID-19 pandemic outbreak in the world, many countries have searched for quick diagnostic tools to detect the virus. There are many ways to design diagnostic assays; however, each may have its limitations. A quick, sensitive, specific, and simple approach is essential for highly rapidly transmitted infections, such as SARS-CoV-2. This study aimed to develop a rapid and cost-effective diagnostic tool using a one-step Reverse Transcriptase Loop-Mediated Isothermal Amplification (RT-LAMP) approach. The results were observed using the naked eye within 30–60 min using turbidity or colorimetric analysis. The sensitivity, specificity, and lowest limit of detection (LoD) for SARS-CoV-2 RNA against the RT-LAMP assay were assessed. This assay was also verified and validated against commercial quantitative RT-PCR used by health authorities in Saudi Arabia. Furthermore, a quick and direct sampling from the saliva, or buccal cavity, was applied after simple modification, using proteinase K and heating at 98 °C for 5 min to avoid routine RNA extraction. This rapid single-tube diagnostic tool detected COVID-19 with an accuracy rate of 95% for both genes (ORF1a and N) and an LoD for the ORF1a and N genes as 39 and 25 copies/reaction, respectively. It can be potentially used as a high-throughput national screening for different respiratory-based infections within the Middle East region, such as the MERS virus or major zoonotic pathogens such as Mycobacterium paratuberculosis and Brucella spp., particularly in remote and rural areas where lab equipment is limited.

Two Years into the COVID-19 Pandemic: Lessons Learned

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is a highly transmissible and virulent human-infecting coronavirus that emerged in late December 2019 in Wuhan, China, causing a respiratory disease called coronavirus disease 2019 (COVID-19), which has massively impacted global public health and caused widespread disruption to daily life. The crisis caused by COVID-19 has mobilized scientists and public health authorities across the world to rapidly improve our knowledge about this devastating disease, shedding light on its management and control, and spawned the development of new countermeasures. Here we provide an overview of the state of the art of knowledge gained in the last 2 years about the virus and COVID-19, including its origin and natural reservoir hosts, viral etiology, epidemiology, modes of transmission, clinical manifestations, pathophysiology, diagnosis, treatment, prevention, emerging variants, and vaccines, highlighting important differences from previously known highly pathogenic coronaviruses. We also discuss selected key discoveries from each topic and underline the gaps of knowledge for future investigations.