An Experimental Model of Proton-Beam-Induced Radiation Dermatitis In Vivo

Radiation dermatitis (RD) is one of the most common side effects of radiation therapy. However, to date, there is a lack of both specific treatments for RD and validated experimental animal models with the use of various sources of ionizing radiation (IR) applied in clinical practice. The aim of this study was to develop and validate a model of acute RD induced using proton radiation in mice. Acute RD (Grade 2-4) was obtained with doses of 30, 40, and 50 Gy, either with or without depilation. The developed model of RD was characterized by typical histological changes in the skin after irradiation. Moreover, the depilation contributed to a skin histology alteration of the irradiated mice. The assessment of animal vital signs indicated that there was no effect of proton irradiation on the well-being or general condition of the animals. This model can be used to develop effective therapeutic agents and study the pathogenesis of radiation-induced skin toxicity, including that caused by proton irradiation.

Evaluation of monoxide film-based dosimeters for surface dose detection in electron therapy

Generally, electron therapy is applied to tumors on or close to the skin surface. However, this causes a variety of skin-related side effects. To alleviate the risk of these side effects, clinical treatment uses skin dosimeters to verify the therapeutic dose. However, dosimeters suffer from poor accuracy, because their attachment sites are approximated with the help of naked eyes. Therefore, a dosimeter based on a flexible material that can adjust to the contours of the human body is required. In this study, the reproducibility, linearity, dose-rate dependence, and percentage depth ionization (PDI) of PbO and HgO film-based dosimeters are evaluated to explore their potential as large-scale flexible dosimeters. The results demonstrate that both dosimeters deliver impressive reproducibility (within 1.5%) and linearity (≥ 0.9990). The relative standard deviations of the dose-rate dependence of the PbO and HgO dosimeters were 0.94% and 1.16% at 6 MeV, respectively, and 1.08% and 1.25% at 9 MeV, respectively, with the PbO dosimeter outperforming the 1.1% of existing diodes. The PDI analysis of the PbO and HgO dosimeters returned values of 0.014 cm (-0.074 cm) and 0.051 cm (-0.016 cm), respectively at 6 MeV (9 MeV) compared to the thimble chamber and R50. Therefore, the maximum error of each dosimeter is within the allowable range of 0.1 cm. In short, the analysis reveals that the PbO dosimeter delivers a superior performance relative to its HgO counterpart and has strong potential for use as a surface dosimeter. Thus, flexible monoxide materials have the necessary qualities to be used for dosimeters that meet the requisite quality assurance standards and can satisfy a variety of radiation-related applications as flexible functional materials.

Development and dosimetric assessment of a patient-specific elastic skin applicator for high-dose-rate brachytherapy

PURPOSE

The purpose of this study was to develop a patient-specific elastic skin applicator and to evaluate its dosimetric characteristics for high-dose-rate (HDR) brachytherapy.

METHODS AND MATERIALS

We simulated the treatment of a nonmelanoma skin cancer on the nose. An elastic skin applicator was manufactured by pouring the Dragon Skin (Smooth-On Inc., Easton, PA) with a shore hardness of 10A into an applicator mold. The rigid skin applicator was printed using high-impact polystyrene with a shore hardness of 73D. HDR plans were generated using a Freiburg Flap (FF) applicator and patient-specific rigid and elastic applicators. For dosimetric assessment, dose-volumetric parameters for target volume and normal organs were evaluated. Global gamma evaluations were performed, comparing film measurements and treatment planning system calculations with various gamma criteria. The 10% low-dose threshold was applied.

RESULTS

The V_120% values of the target volume were 56.9%, 70.3%, and 70.2% for HDR plans using FF, rigid, and elastic applicators, respectively. The maximum doses of the right eyeball were 21.7 Gy, 20.5 Gy, and 20.5 Gy for the HDR plans using FF, rigid, and elastic applicators, respectively. The average gamma passing rates were 82.5% ± 1.5%, 91.6% ± 0.8%, and 94.8% ± 0.2% for FF, rigid, and elastic applicators, respectively, with 3%/3 mm criterion.

CONCLUSIONS

Patient-specific elastic skin applicator showed better adhesion to irregular or curved body surfaces, resulting in better agreement between planned and delivered dose distributions. The applicator suggested in this study can be effectively implemented clinically.