Thermosensitive Intravitreal In Situ Implant of Cefuroxime Based on Poloxamer 407 and Hyaluronic Acid

The main method of treatment and prevention of endophthalmitis is a combination of intravitreal and topical administration of antibiotics, such as cefuroxime moxifloxacin or vancomycin. However, this method is ineffective due to the rapid elimination of the drug. This problem can be solved with the help of intravitreal in situ injection systems, which are injected with a syringe into the vitreous body and provide prolonged action of the drug at the focus of inflammation. Under the influence of temperature, the liquid drug undergoes a phase transition and turns into a gel after injection. This ensures its prolonged action. The study aimed to develop an intravitreal in situ cefuroxime delivery system for the treatment of endophthalmitis based on a thermosensitive biodegradable composition of poloxamer 407 and hyaluronic acid. A combination of poloxamer Kolliphor® P407, Kolliphor® P188, and PrincipHYAL® hyaluronic acids of different molecular weights was used as a delivery system. The potency of cefuroxime solid dispersion with polyvinylpyrrolidone-10000, polyethylene glycol-400, and polyethylene glycol-1500 in a 1:2 ratio was studied for prolonged action compared to cefuroxime substance. The experimental formulations were studied for the parameters of gelation temperature in a long-term test (4 months), pH, and release of cefuroxime using dialysis bags. To study the distribution parameter in the vitreous body, an in vitro model (1/13) was developed, which was a hollow agar sphere filled with 1% (w/v) polyacrylate gel. For the superior formulations, a HET-CAM test (chorioallantoic membrane test) was performed to determine the absence of irritant effects. According to the study results, a formulation containing a solid dispersion of cefuroxime:PEG-400 (1:2), the matrix of which contained 18% (w/v) Kolliphor® P407 poloxamer, 3% (w/v) Kolliphor® P188 poloxamer, and 0.5% (w/v) hyaluronic acid (1400-1800), was selected. This sample had an average gelation temperature of 34.6 °C, pH 6.7 ± 0.5, and a pronounced prolonged effect. Only 7.6% was released in 3 h of the experiment, whereas about 38% of cefuroxime was released in 72 h. No irritant effect on the chorioallantoic membrane was observed for any formulations studied.

Effects of Flow Hydrodynamics and Eye Movements on Intraocular Drug Clearance

New in vitro prototypes (PK-Eye™) were tested with and without eye movement to understand diffusion and convection effects on intraocular clearance. Port placement in front ((i) ciliary inflow model) and behind the model lens ((ii) posterior inflow model) was used to study bevacizumab (1.25 mg/50 µL) and dexamethasone (0.1 mg/100 µL) in phosphate-buffered saline (PBS, pH 7.4) and simulated vitreal fluid (SVF). Dexamethasone was studied in a (iii) retinal-choroid-sclera (RCS) outflow model (with ciliary inflow and two outflow pathways). Ciliary vs. posterior inflow placement did not affect the half-life for dexamethasone at 2.0 µL/min using PBS (4.7 days vs. 4.8 days) and SVF (4.9 days with ciliary inflow), but it did decrease the half-life for bevacizumab in PBS (20.4 days vs. 2.4 days) and SVF (19.2 days vs. 10.8 days). Eye movement only affected the half-life of dexamethasone in both media. Dexamethasone in the RCS model showed approximately 20% and 75% clearance from the RCS and anterior outflows, respectively. The half-life of the protein was comparable to human data in the posterior inflow model. Shorter half-life values for a protein in a ciliary inflow model can be achieved with other eye movements. The RCS flow model with eye movement was comparable to human half-life data for dexamethasone.

The EyeFlowCell: Development of a 3D-Printed Dissolution Test Setup for Intravitreal Dosage Forms

An in vitro dissolution model, the so-called EyeFlowCell (EFC), was developed to test intravitreal dosage forms, simulating parameters such as the gel-like consistency of the vitreous body. The developed model consists of a stereolithography 3D-printed flow-through cell with a polyacrylamide (PAA) gel as its core. This gel needed to be coated with an agarose sheath because of its low viscosity. Drug release from hydroxypropyl methylcellulose-based implants containing either triamcinolone acetonide or fluorescein sodium was studied in the EFC using a schematic eye movement by the EyeMovementSystem (EyeMoS). For comparison, studies were performed in USP apparatus 4 and USP apparatus 7. Significantly slower drug release was observed in the PAA gel for both model drugs compared with the compendial methods. Drug release from fluorescein sodium-containing model implants was completed after 40 min in USP apparatus 4, whereas drug release in the gel-based EFC lasted 72 h. Drug release from triamcinolone acetonide-containing model implants was completed after 35 min in USP apparatus 4 and after 150 min in USP apparatus 7, whereas this was delayed until 96 h in the EFC. These results suggest that compendial release methods may overestimate the drug release rate in the human vitreous body. Using a gel-based in vitro release system such as the EFC may better predict drug release.

In vitro dissolution testing models of ocular implants for posterior segment drug delivery

The delivery of drugs to the posterior segment of the eye remains a tremendously difficult task. Prolonged treatment in conventional intravitreal therapy requires injections that are administered frequently due to the rapid clearance of the drug molecules. As an alternative, intraocular implants can offer drug release for long-term therapy. However, one of the several challenges in developing intraocular implants is selecting an appropriate in vitro dissolution testing model. In order to determine the efficacy of ocular implants in drug release, multiple in vitro test models were emerging. While these in vitro models may be used to analyse drug release profiles, the findings may not predict in vivo retinal drug exposure as this is influenced by metabolic and physiological factors. This review considers various types of in vitro test methods used to test drug release of ocular implants. Importantly, it discusses the challenges and factors that must be considered in the development and testing of the implants in an in vitro setup.

Vitreous substitutes: An overview of the properties, importance, and development

Vitreous or vitreous humor is a complex transparent gel that fills the space between the lens and retina of an eye and acts as a transparent medium that allows light to pass through it to reach the photoreceptor layer (retina) of the eye. The vitreous humor is removed in ocular surgery (vitrectomy) for pathologies like retinal detachment, macular hole, diabetes-related vitreous hemorrhage detachment, and ocular trauma. Since the vitreous is not actively regenerated or replenished, there is a need for a vitreous substitute to fill the vitreous cavity to provide a temporary or permanent tamponade to the retina following some vitreoretinal surgeries. An ideal vitreous substitute could probably be left inside the eye forever. The vitreous humor is transparent, biocompatible, viscoelastic and highly hydrophilic; polymeric hydrogels with these properties can be a potential candidate to be used as vitreous substitutes. To meet the tremendous demand for the vitreous substitute, many scientists all over the world have developed various kinds of vitreous substitutes or tamponade agent. Vitreous substitutes, whatsoever developed till date, are associated with several advantages and disadvantages, and there is no ideal vitreous substitute available till date. This review highlights the polymer-based vitreous substitutes developed so far, along with their advantages and limitations. The gas-based and oil-based substitutes have also been discussed but very briefly.

Validation of hyaluronic acid-agar-based hydrogels as vitreous humor mimetics for in vitro drug and particle migration evaluations

Artificial vitreous humor holds immense potential for use in in vitro intravitreal drug delivery assays. In this study, we investigated rheological properties and drug or nanoparticle migration in hyaluronic acid (HA) - agar based hydrogels and compared these characteristics with bovine vitreous humor. Gel compositions identified in literature containing HA (0.7-5.0 mg/ml) and agar (0.95-4.0 mg/ml) were classified as either high (VH), medium (VM) or low (VL) polymer load. Viscoelastic behavior was evaluated using oscillatory rheology, and migration of differently sized and charged polystyrene nanoparticles (NPs) through the different gels was determined via multiple particle tracking. Comparable rheological behaviour was observed between VL and bovine vitreous. Tracking evaluations revealed that increasing particle size and gel viscosity slowed NP migration. Additionally, 100 nm anionic NPs migrated slower than neutral NPs in VL and VM, while cationic NPs were immobile in all gels. Finally, distribution and clearance of sodium fluorescein was used to model drug mobility through the gels using a custom-built eye model. Flow and angular movement only influenced drug migration in VL and VM, but not VH. Finally, VL and VM demonstrated to have the most similar sodium fluorescein clearance to that of bovine vitreous humor. Together, these evaluations demonstrate that low viscosity HA-agar gels can be used to approximate nanoparticle and drug migration through biological vitreous humor.

Hydrodynamics of Intravitreal Injections into Liquid Vitreous Substitutes

Intravitreal injections have become the cornerstone of retinal care and one of the most commonly performed procedures across all medical specialties. The impact of hydrodynamic forces of intravitreal solutions when injected into vitreous or vitreous substitutes has not been well described. While computational models do exist, they tend to underestimate the starting surface area of an injected bolus of a drug. Here, we report the dispersion profile of a dye bolus (50 µL) injected into different vitreous substitutes of varying viscosities, surface tensions, and volumetric densities. A novel 3D printed in vitro model of the vitreous cavity of the eye was designed to visualize the dispersion profile of solutions when injected into the following vitreous substitutes—balanced salt solution (BSS), sodium hyaluronate (HA), and silicone oils (SO)—using a 30G needle with a Reynolds number (Re) for injection ranging from approximately 189 to 677. Larger bolus surface areas were associated with faster injection speeds, lower viscosity of vitreous substitutes, and smaller difference in interfacial surface tensions. Boluses exhibited buoyancy when injected into standard S1000. The hydrodynamic properties of liquid vitreous substitutes influence the initial injected bolus dispersion profile and should be taken into account when simulating drug dispersion following intravitreal injection at a preclinical stage of development, to better inform formulations and performance.

Ocular Drug Delivery: A Special Focus on the Thermosensitive Approach

The bioavailability of ophthalmic therapeutics is reduced because of the presence of physiological barriers whose primary function is to hinder the entry of exogenous agents, therefore also decreasing the bioavailability of locally administered drugs. Consequently, repeated ocular administrations are required. Hence, the development of drug delivery systems that ensure suitable drug concentration for prolonged times in different ocular tissues is certainly of great importance. This objective can be partially achieved using thermosensitive drug delivery systems that, owing to their ability of changing their state in response to temperature variations, from room to body temperature, may increase drug bioavailability. In the case of topical instillation, in situ forming gels increase pre-corneal drug residence time as a consequence of their enhanced adhesion to the corneal surface. Otherwise, in the case of intraocular and periocular, i.e., subconjunctival, retrobulbar, peribulbar administration, among others, they have the undoubted advantage of being easily injectable and, owing to their sudden thickening at body temperature, have the ability to form an in situ drug reservoir. As a result, the frequency of administration can be reduced, also favoring the patient’s adhesion to therapy. In the main section of this review, we discuss some of the most common treatment options for ocular diseases, with a special focus on posterior segment treatments, and summarize the most recent improvement deriving from thermosensitive drug delivery strategies. Aside from this, an additional section describes the most widespread in vitro models employed to evaluate the functionality of novel ophthalmic drug delivery systems.

Influence of Siluron® insertion on model drug distribution in the simulated vitreous body

Biorelevant in vitro test systems may be helpful to understand the in vivo behaviour of modern intravitreal dosage forms such as implants and injections. The already presented Vitreous Model (VM) in combination with the Eye Movement System (EyeMoS) was used to simulate the situation after a vitrectomy in combination with Siluron® silicone oil (SO) insertion in vitro and to investigate the distribution of the model drug fluorescein sodium (FS) within the modified VM. The state after a vitrectomy was simulated in vitro by replacing half the volume of the gelled vitreous substitute by SO. Under consideration of simulated eye movements the position of SO towards the simulated vitreous body was examined. Furthermore, the influence of two different injection techniques was studied. On the one hand, FS was injected directly into the gel and on the other hand the injection was set through the gel in order to directly reach the SO. Independent of the injection technique, it was shown that the model drug distributed almost exclusively into the gel and not into the SO. This can be explained with the backflow of FS into the gel and the lack of solubility in the SO. Using the modified VM and EyeMoS, the in vitro characterization of drug release and distribution behaviour of intravitreal injections can be performed under consideration of a simulated vitrectomy.