A New Class of Materials with Promising Thermoelectric Properties: MNiSn (M = Ti, Zr, Hf)

Half-Heusler phase TmNiSb under pressure: intrinsic phase separation, thermoelectric performance and structural transition

Half-Heusler (HH) phase TmNiSb was obtained by arc-melting combined with high-pressure high-temperature sintering in conditions: p = 5.5 GPa, [Formula: see text] = 20, 250, 500, 750, and 1000 [Formula: see text]C. Within pressing temperatures 20-750 [Formula: see text]C the samples maintained HH structure, however, we observed intrinsic phase separation. The material divided into three phases: stoichiometric TmNiSb, nickel-deficient phase TmNi[Formula: see text]Sb, and thulium-rich phase Tm(NiSb)[Formula: see text]. For TmNiSb sample sintered at 1000 [Formula: see text]C, we report structural transition to LiGaGe-type structure (P[Formula: see text]mc, a = 4.367(3) Å, c = 7.138(7) Å). Interpretation of the transition is supported by X-ray powder diffraction, electron back-scattered diffraction, ab-initio calculations of Gibbs energy and phonon dispersion relations. Electrical resistivity measured for HH samples with phase separation shown non-degenerate behavior. Obtained energy gaps for HH samples were narrow ([Formula: see text] 260 meV), while the average hole effective masses in range 0.8-2.5[Formula: see text]. TmNiSb sample pressed at 750 [Formula: see text]C achieved the biggest power factor among the series, 13 [Formula: see text]WK[Formula: see text]cm[Formula: see text], which proves that the intrinsic phase separation is not detrimental for the electronic transport.

Transport properties of Heusler compounds and alloys

Heusler compounds are a large group of intermetallic compositions with versatile material properties. In recent times, they are found to be important for their practical applications in the fields of spintronics and shape memory effect. Interestingly, their physical properties can be easily tuned by varying the valence electron concentration through proper doping and substitution. Empirical laws concerning the valence electron concentration, such as Slater-Pauling or Hume-Rothery rules are found to be useful in predicting their electronic, magnetic and structural properties quite accurately. Electrical transport measurements are simple laboratory-based techniques to gather a handful of information on the electronic properties of metals and semiconductors. The present review aimed to provide a comprehensive view of the transport in 3dand 4dtransition metal-based bulk Heusler compositions. The main emphasis is given on resistivity, magnetoresistance, Hall effect, thermopower and spin-dependent transport in spintronics devices. The review primarily focuses on magnetic Heusler compounds and alloys, albeit it also addresses several non-magnetic materials showing superconductivity or large thermopower.

Pressure-Induced Enhancement of Thermoelectric Figure of Merit and Structural Phase Transition in TiNiSn

Half-Heusler thermoelectric materials are potential candidates for high thermoelectric efficiency. We report high-pressure thermoelectric and structural property measurements, density functional theory calculations on the half-Heusler material TiNiSn, and an increase of 15% in the relative dimensionless figure of merit, ZT, around 3 GPa. Thermal and electrical properties were measured utilizing a specialized sample cell assembly designed for the Paris-Edinburgh large-volume press to a maximum pressure of 3.5 GPa. High-pressure structural measurements performed up to 50 GPa in a diamond-anvil cell indicated the emergence of a new high-pressure phase around 20 GPa. A first-principles structure search performed using an ab initio random structure search approach identified the high-pressure phase as an orthorhombic type, in good agreement with the experimental results.

Thermal and Electronic Transport Properties of the Half-Heusler Phase ScNiSb

Thermoelectric properties of the half-Heusler phase ScNiSb (space group F 4 ¯ 3m) were studied on a polycrystalline single-phase sample obtained by arc-melting and spark-plasma-sintering techniques. Measurements of the thermopower, electrical resistivity, and thermal conductivity were performed in the wide temperature range 2-950 K. The material appeared as a p-type conductor, with a fairly large, positive Seebeck coefficient of about 240 μV K^-1 near 450 K. Nevertheless, the measured electrical resistivity values were relatively high (83 μΩm at 350 K), resulting in a rather small magnitude of the power factor (less than 1 × 10^-3 W m^-1 K^-2) in the temperature range examined. Furthermore, the thermal conductivity was high, with a local minimum of about 6 W m^-1 K^-1 occurring near 600 K. As a result, the dimensionless thermoelectric figure of merit showed a maximum of 0.1 at 810 K. This work suggests that ScNiSb could be a promising base compound for obtaining thermoelectric materials for energy conversion at high temperatures.

On the Phase Separation in n-Type Thermoelectric Half-Heusler Materials

Half-Heusler compounds have been in focus as potential materials for thermoelectric energy conversion in the mid-temperature range, e.g., as in automotive or industrial waste heat recovery, for more than ten years now. Because of their mechanical and thermal stability, these compounds are advantageous for common thermoelectric materials such as Bi2Te3, SiGe, clathrates or filled skutterudites. A further advantage lies in the tunability of Heusler compounds, allowing one to avoid expensive and toxic elements. Half-Heusler compounds usually exhibit a high electrical conductivity σ, resulting in high power factors. The main drawback of half-Heusler compounds is their high lattice thermal conductivity. Here, we present a detailed study of the phase separation in an n-type Heusler materials system, showing that the TixZryHfzNiSn system is not a solid solution. We also show that this phase separation is key to the thermoelectric high efficiency of n-type Heusler materials. These results strongly underline the importance of phase separation as a powerful tool for designing highly efficient materials for thermoelectric applications that fulfill the industrial demands of a thermoelectric converter.

Thermoelectric properties of half-Heusler ZrNiPb by using first principles calculations

We investigate the electronic structures and thermoelectric properties of a recently synthesized half-Heusler ZrNiPb compound by using a generalized gradient approximation (GGA) and GGA plus spin–orbit coupling (GGA + SOC).

Half-Heusler (TiZrHf)NiSn Unileg Module with High Powder Density

(TiZrHf)NiSn half-Heusler compounds were prepared by arc melting and their thermoelectric properties characterized in the temperature range between 325 K and 857 K, resulting in a Figure of Merit ZT ≈ 0.45. Furthermore, the prepared samples were used to construct a unileg module. This module was characterized in a homemade thermoelectric module measurement stand and yielded 275 mW/cm² and a maximum volumetric power density of 700 mW/cm³. This was reached using normal silver paint as a contacting material; from an improved contacting, much higher power yields are to be expected.

Electronic Structure of Complex Bismuth Chalcogenides and Other Narrow-Gap Thermoelectric Materials

There is considerable current effort to discover new thermoelectric materials with a high figure of merit Z. Some of these new materials are narrow-gap semiconductors with rather complex crystal structures. In this paper we discuss the results of electronic structure calculations in two classes of such systems. The first class consists of BaBiTe3, a structural and chemical derivative of the well-studied Bi2Te3. Similarities and differences in the band structures of these two systems are discussed. The second class consists of half-Heusler or “stuffed”-NaCl compounds MNiX, where M is Y, La, Lu, Yb, and X is a pnictogen; As, Sb, Bi. To understand the physical reason behind the energy gap formation, we compare the electronic structure of YNiSb with that of an isoelectronic system ZrNiSn, another isostructural compound of thermoelectric interest. These calculations were carried out within density functional theory (in generalized gradient approximation) using self-consistent full-potential LAPW method. Energy gaps and effective masses associated with the conduction band minimum and valence band maximum have been calculated and these quantities have been used to estimate transport properties. Large room temperature thermopower values in Bi2Te3 and BaBiTe3 can be understood in terms of multiple conduction and valence band extrema whereas similar large values in ZrNiSn and other half-Heusler compounds can be ascribed to large electron and hole effective mass.