Effect of the time-point of acid etching on the persistence of sealer residues after using different dental cleaning protocols

Sealing of pulp chamber dentin in endodontics: Influence of bond strategy and time-point application

Context

Seal the dentin of the pulp chamber during endodontic treatment to avoid interfering with the restorative treatment performed afterward.

Aims

The aim was to evaluate the effect of three adhesive systems applied in different bonding strategies (etch-and-rinse, self-etch, and universal adhesive) and time-point application (immediately after the cavity access preparation or after endodontic obturation) on the hybrid layer formation and dentinal penetrability.

Materials and Methods

Forty-eight sound molars were randomly distributed into six groups (n = 10) according to the adhesive system used: Forty-eight sound molars were randomly distributed into six groups (n = 10) according to the adhesive system used and the time-point application: Adper Scotchbond Multi-purpose (AS), Clearfil SE (CF) and Scotchbond Universal (SU) in strategy of immediate endodontic sealing (IES) or delayed endodontic sealing (DES). In IES-AS, IES-CF, and IES-SU groups, dentin sealing was performed immediately after the cavity access, while in DES-AS, DES-CF, and DES-SU, after root canal obturation. The specimens were sectioned in the long axis, in a buccal-lingual direction, and the dentinal penetrability of the adhesive systems was evaluated using confocal microscopy images. Hybrid layer formation was analyzed by scanning electron microscopy images.

Statistical Analysis Used

Dentinal penetrability data were analyzed with the ANOVA test and the Kruskal-Wallis test was performed for hybrid layer data (α = 0.05).

Results

IES-CF showed the lowest dentinal penetrability (P < 0.05), while the other protocols were similar to each other (P > 0.05). No significant differences were found between groups regarding the hybrid layer formation (P > 0.05). Immediate and DES protocols do not influence the hybrid layer formation, regardless of the bond strategy used.

Conclusions

Sealing the pulp chamber dentin before endodontic treatment can improve the bond strength of the final restoration but the formation of the hybrid layer was not influenced by the bond strategy.

Cleaning and microstructural effects of amyl acetate on pulp chamber dentin impregnated with epoxy resin-based endodontic sealer

OBJECTIVE

To evaluate the cleaning potential of 95% ethanol, acetone, and amyl acetate solutions used solely or in association, to remove epoxy resin-based sealer residues from pulp chamber dentin and their microstructural effects.

MATERIALS AND METHODS

One hundred and eighty bovine incisor specimens were divided into nine groups according to the cleaning protocol: ET (ethanol); AC (acetone); AA (amyl acetate); E1: AA+AC; E2: AA+ET; E3: AC+ET; E4: AA+AC+ET; PC (positive control), and NC (negative control). All groups were impregnated with epoxy resin-sealer, except NC. Ninety specimens were divided into groups (n = 10) for evaluation of persistence of residues and amount of open dentinal tubules by SEM analysis and evaluation of chemical compounds on the dentin surface after cleaning with electron dispersive spectroscopy. The others 90 specimens were submitted to Knoop microhardness evaluation. Persistence of residues data were submitted to the Kruskal Wallis and Dunn tests (α = 0.05). Open dentinal tubules and microhardness data were submitted to one-way ANOVA and Mann Whitney tests (α = 0.05).

RESULTS

AA and E4 protocols showed the lowest persistence of residues. E4 group had the highest incidence of open dentinal tubules. E3 and E4 groups showed no changes in the atomic ratio Ca/P, which was similar to NC group. E4 group did not present W, an element presents in all the other groups. ET and E4 protocols showed the smallest reduction in dentin microhardness.

CONCLUSIONS

The combination of amyl acetate, acetone and ethanol is the most effective and safe protocol to remove epoxy sealer residues on pulp chamber dentin. Moreover, it has the lowest microhardness reduction.

CLINICAL SIGNIFICANCE

The combined use of amyl acetate, acetone, and ethanol enhanced the cleaning of pulp chamber dentin with minimal microstructural damage.

Impact of cleansing protocols to remove endodontic sealer residues on the adhesive interface: Bonding with universal adhesive systems

OBJECTIVE

The aim of this study was to evaluate the effectiveness of cleansing protocols to remove sealer residues using different cleaning strategies and the effect of bond strength of two universal adhesives to dentin impregnated with epoxy resin-based sealer.

MATERIALS AND METHODS

Fifty bovine dentin specimens were impregnated with epoxy resin-based sealer containing calcium hydroxide (Sealer Plus) and submitted to cleansing protocols (n = 10): negative control (NC), positive control (PC), 95% ethanol (ET), xylol (XI), and amyl acetate (AA). Specimens were evaluated by scanning electron microscope (SEM). Other 100 specimens were submitted to the same protocols (n = 20). Each protocol was divided into subgroups (n = 10) according to the universal adhesive system used: Scotchbond Universal (SU); Ambar Universal (AU). Bond strength was evaluated by micro-shear bond test (μSBT). Persistence of residues data were assessed with Kruskal-Wallis and Dunn's tests. μSBT data were analyzed with two-way ANOVA (α = 5%).

RESULTS

ET presented higher persistence of residues compared to AA and XI (p < 0.05). AA and XI were similar from each other (p > 0.05). AU and SU presented similar μSBT values, regardless of the cleansing solution (p > 0.05). SU-NC presented the highest μSBT among all conditions (p < 0.05).

CONCLUSION

The bond strength of universal adhesives was not affected by different amounts of sealer residues after different cleaning protocols.

CLINICAL SIGNIFICANCE

Non-polar substances such as amyl acetate and xylol are effective for removing residues from epoxy resin-based endodontic sealers.

Microtensile bond strength to sealer-contaminated dentin after using different cleaning protocols

Background/purpose

Sealer residues on dentin may affect bonding to restorative materials. This study aimed to evaluate the bond strength to sealer-contaminated dentin after using different cleaning protocols.

Materials and methods

Freshly extracted bovine incisors were prepared and exposed the buccal pulp chamber dentin, obtaining segments measuring 5 mm × 5 mm with a height of 3 mm. The segments were randomly distributed into 4 groups (n = 7) according to different protocols. Control group: no contamination was performed. In the three experimental groups, the segments were contaminated with epoxy resin-based sealer for 5 min, and different cleaning protocols were performed. Acetone group: acetone-saturated cotton pellets were used to wipe the sealer. Ultrasound group: ultrasonic ET-20D tip cleaning. Acetone combined with ultrasound group: cleaning with acetone-saturated cotton pellets and ultrasonic tip. All segments were bonded using a self-etch adhesive. Two samples in each group were scanned by swept-source optical coherence tomography (SS-OCT) to evaluate sealer residues. A microtensile test was performed on the remaining 5 samples, which were built up with composite resin.

Results

Sealer residues were observed in 3 of 14 (21.4%) sections of acetone group by SS-OCT. Compared to the control, ultrasound alone or in combination with acetone preserved the bond strength (P > .05). The ultrasound group exhibited the highest bond strength (39.38 MPa), which differed from that of the acetone group, which provided the lowest bond strength (32.88 MPa) (P < .05).

Conclusion

Cleaning epoxy resin-based sealer-contaminated dentin surfaces using ultrasound or combined with acetone could preserve the bond strength.

Hybrid layer formation and bond strength to dentin impregnated with endodontic sealer after cleaning protocols

Aims:

This study evaluated the hybrid layer formation and bond strength of two adhesive systems, Scotchbond Universal (U) or Adper Scotchbond Multi Purpose (M), after cleaning protocols using ethanol (E) or xylol (X), to dentin impregnated with an epoxy-resin based endodontic sealer.

Settings and Design:

The study design was an Experimental in vitro study.

Methodology:

One hundred bovine dentin specimens were randomly allocated into five groups (n = 10): Computed tomography (CT) (control): Only acid etching + M; E+U; X+U; E+M. After the specimen preparation, images were obtained using confocal laser scanning microscopy to evaluate the hybrid layer formation. For microshear bond strength test, the dentin specimens were included in polyvinyl chloride tubes and four resin composite cylinders were placed on the surface. The analysis was performed 24 h after storage.

Statistical Analysis Used:

For parametric and nonparametric data, analysis of variance followed by Tukey test and Kruskal–Wallis, followed by Dunn test were, respectively, used at a significance level of 5%.

Results:

Regarding hybrid layer formation, all experimental groups were similar to each other (P > 0.05). However, CT showed higher hybrid layer formation than other groups (P < 0.05), except in relation to X+M (P > 0.05). Bond strength was statistically similar among all groups (P > 0.05).

Conclusions:

Hybrid layer formation in dentin impregnated with epoxy resin-based sealer and submitted to different cleaning protocols was similar to the control group only for X+M. No differences were found among the experimental groups. Regarding the bond strength, no effect was observed for any group.

Protocols for Mechanical Cleaning of the Post Space on the Bond Strength Between Root Dentin and Cementation System

OBJECTIVE

To evaluate the effects of mechanical versus chemical cleaning protocols for cleaning the root dentin surface before cementation of fiberglass posts for their effect on the bond strength, failure mode, and dentinal penetration of the cementing agent using an etch-and-rinse adhesive system on dentin prepared to receive a fiberglass post.

METHODS

Forty roots of bovine teeth were endodontically treated and prepared for fiber post cementation. The specimens were randomized into 4 groups of 10: Control group (CO) - irrigation with 2.5% NaOCl; DW group- irrigation with distilled water; RB group - rotating brush for cleaning root canals, and CUI group - continuous ultrasonic irrigation. The fiberglass posts were cemented, and the specimens were immersed in distilled water for 6 months. A push-out test was performed on the cervical, middle, and apical thirds of the samples. Dentinal penetration of the cementing agent and the fracture pattern were evaluated by laser confocal microscopy. Statistical analysis was performed using analysis of variance (ANOVA) and post hoc Tukey tests (α=0.05). Results: The RB and CUI groups showed significantly higher bond strength values when compared to the Control and DW groups (p<0.05). In addition, in the control and DW groups, the apical third presented lower bond strength values when compared to middle and cervical thirds.

CONCLUSION

While DW showed the highest incidence of adhesive type failure, CUI resulted in the highest dentinal penetration of the cementing agent (p<0.05). RB and CUI resulted in the highest bond strength between cementation system and root dentin. In addition, CUI favored greater dentinal penetration of fiberglass post cementing agent.

Effect of cleaning protocols on bond strength of etch-and-rinse adhesive system to dentin

Aim

This study aimed to evaluate the cleaning protocol of dentin impregnated with epoxy resin-based sealer (AH Plus) and the effects on the adhesive interface using 95% ethanol (E) or formamide solution (F) associated with microabrasion with glass microparticles (M).

Methodology

Forty dentin specimens were impregnated with sealer (AH Plus). Specimens were cleansed according to the following protocols (n = 10): G1 (E); G2 (F); G3 (E = M); and G4 (F = M). No treatment was performed in G5 (control). Specimens were subjected to standard error of the mean to evaluate the residues persistence (×500) and open dentinal tubules counting (×2000). Another fifty specimens were subjected to similar procedures and cleaning protocols. Seven days later, composite-resin-made specimens were performed on dentin using etch-and-rinse adhesive system, then submitted to microshear test.

Results

G2 and G4 showed higher residues' persistence and lower incidence of open dentinal tubules than G1 and G3 (P < 0.05). No difference was found between G1 and G3 or G2 and G4 (P > 0.05). Adhesive system bond strength was similar in all groups (P > 0.05).

Conclusions

Microabrasion negatively affected the epoxy resin-based sealer residues' removal protocols' action; all groups presented residues on the dentin surface. However, 7 days later, the protocols did not affect the bond strength of adhesive system to sealer-impregnated dentin.