Medium-term evaluation of the bond strength and dentin penetration of self-adhesive resin cements to root dentin

BACKGROUND

Medium-term evaluate the bond strength and tag formation in root dentin using self-adhesive cements Maxcem Elite (MCE), Relyx U200 (RU2), SeT PP (SPP) and Megalink (MGL) compared to conventional cement Relyx ARC (ARC) for glass fibre post cementation.

MATERIALS AND METHODS

One hundred bovine incisors roots were endodontically treated and divided into 5 groups (n = 20) according to the cementation system: MCE, RU2, SPP, MGL and ARC. All cementation systems were evaluated at 24 h (1) and 12 months (2) after post cementation. Specimens from the cervical, middle and apical thirds of the root were submitted to push-out bond strength test and confocal laser microscopy to verify the dentin penetration. The adhesive failure mode was classified as adhesive, cohesive and mixed. Data were analysed by one-way ANOVA and Tukey tests (α = 5%).

RESULTS

ARC-1 and ARC-12 showed the highest bond strength (P < 0.05). ARC showed the greatest tag extension, regardless of the third (P < 0.05). The most frequent failure mode in the 24-h analysis was cohesive, regardless of the cement used. For the 12-month analysis, mixed failure was the most frequent.

CONCLUSION

Conventional cement (ARC) showed the highest bond strength and tag extension, regardless of the evaluation period. In all cementation systems, the bond strength decreased after 12 months. © 2023 Australian Dental Association.

Surface and intra-pulpal temperature variation during tooth whitening photoactivated with LED/laser

This study evaluated the variation of surface and intra-pulpal temperature, during bleaching protocol, using LED/laser. The 35% (HP35), 15% (HP15) and 6% (HP6) gels were used associated with LED/laser applied every 1 min for 30 min in a human canine. The evaluation of surface temperature variation (∆Ts) was performed using a pHmeter and the intra-pulpal temperature variation (∆Ti) was performed using a digital thermometer, at times of 1-, 5-, 10- 15- and 30-min. Statistical analysis was performed using the two-way repeated measures ANOVA test and Bonferroni post-hoc test was used at a significance level of 5%. HP35 and HP15 showed greater temperature variation than HP6 up to 10 min of surface evaluation, showing no differences between them. In the intra-pulpal evaluation, no group showed differences throughout the procedure.

Effect of aging and cementation systems on the bond strength to root dentin after fiber post cementation

This study evaluated the effect of aging and cementation of fiber posts using glass ionomer and resin cements on push-out bond strength, failure mode, and resin tag formation. One hundred and twenty bovine incisors were used. After post-space preparation, the specimens were randomly allocated into 12 groups (n = 10) according to the cementation system used: GC - GC Gold Label Luting & Lining); RL - RelyX Luting 2; MC - MaxCem Elite; RU - RelyX U200 and the aging periods (24 hours, 6 months, and 12 months). Slices from the cervical, middle, and apical thirds were obtained and analyzed by push-out bond strength test and confocal laser scanning microscopy. One-way ANOVA and Tukey's post-hoc test was used at a significance level of 5%. For the push-out bond strength test, no differences among GC, RU, and MC in the cervical and middle thirds were observed, regardless of the period of storage (P > 0.05). In the apical third, GC and RU showed similar bond strength but higher than other groups (P > 0.05). After 12 months, GC showed the highest bond strength (P < 0.05). Bond strength to post-space dentin decreased over time, regardless of the cementation system used. Cohesive failure was the most frequent, regardless of the period of storage, cementation system, and post-space third. Tag formation was similar among all groups. After 12 months, GC showed the highest bond strength values.

Violet LED associated with high concentration hydrogen peroxide: Effects on bleaching efficacy, pH, and temperature

BACKGROUND

This study aimed to evaluate the bleaching efficacy, pH, and temperature of 35% hydrogen peroxide (HP) gel used alone or associated with violet LED.

METHODS

Sixty bovine crowns were sectioned (5 × 5 × 2mm). After staining with black tea, the specimens were randomized into four groups (n = 10) according to the bleaching protocol: HP35R: 3 × 15 min 35% HP; HP35: 1 × 45 min 35% HP; HP35VR: 3 × 8min 35% HP + Violet LED; HP35V: 1 × 24 min + Violet LED. Two bleaching sessions were performed for all the groups. Color change was evaluated before, 24h after each session, 7 days and 15 days after the last session. The variables ∆E₀₀ [CIEDE2000] and W_ID were used for color analysis. The pH variation (initial and final) and the temperature of the gel were recorded (n = 5). ANOVA two-way for repeated measures and Bonferroni post-test was used at a significance level of 5%.

RESULTS

HP35VR and HP35V the most noticeable color change(p < 0.05). The final values of pH were lower than the initial ones, but with no difference between the groups (p > 0.05). Groups HP35VR and HP35V showed an increase in temperature in relation to HP35R (p < 0.05).

CONCLUSIONS

Violet LED improved the bleaching efficacy of 35% HP in a time-saving manner without negatively affecting the pH and temperature of 35% HP. The renewal of HP did not influence the outcomes.

Effect of Different Irrigants on the Adhesive Interface and Influence on the Push Out Strength of Fiber Posts

PURPOSE

The aim of this study was to evaluate the effects of a new irrigant solution on the post space cleaning and the adhesive resistance of fiber posts.

METHODS AND MATERIALS

Eighty roots of bovine teeth were randomly allocated into eight groups (n=10 for each group). Evaluations were performed in two different time points for each irrigant. The irrigants included a control group with distilled water (DW), 2.5% NaOCl and 17% EDTA (SH), 1% peracetic acid (PA), and 5% boric acid and 1% citric acid (EX). The time points were 24 hours (I-immediate) and 6 months (D-delayed). The push-out test was performed using a universal testing machine with a 5 kN load cell operating at a crosshead speed of 0.5 mm/minute. The dentinal cementation system was analyzed using a laser confocal microscope (LSM5; Zeiss, Jena, Germany), and incidence of residue on radicular dentin was evaluated by scanning electron microscopy (SEM). The incidence of residue was evaluated by the Kruskal-Wallis test and push-out bond strength and dentin penetrability were evaluated via a oneway analysis of variance (ANOVA) and Tukey tests (α=0.05).

RESULTS

The EX irrigation protocol demonstrated the lowest incidence of residue on the dentin surface (p<0.05), independently of the evaluated third. In the cervical and the middle post thirds, EXI, EXD, SHI, and SHD groups exhibited similar push-out bond strength values (p>0.05). EXI, EXD, PAI, and PAD exhibited the greatest dentinal penetrability of the cementation system in all the post thirds (p<0.05).

CONCLUSIONS

A solution containing 5% boric acid and 1% citric acid can be a promising irrigant for radicular post space cleaning. It has adequate potential for cleaning the dentin surface without interfering with the adhesive interface between the dentin and the cementation system.

Whitening efficacy of low concentration hydrogen peroxide photoactivated with blue or violet LED

BACKGROUND

Bleaching protocols using low concentration hydrogen peroxide (HP) photoactivated with LED sources have been widely discussed. We evaluated the whitening efficacy of 15% HP photoactivated with blue or violet LED compared to 35% HP.

METHODS

Thirty bovine crowns were sectioned into 5 × 5 × 2mm specimens. After staining in black tea, the specimens were randomized into three groups (n=10): 35% HP, 15% HP + blue LED and 15% HP + violet LED. Two bleaching sessions were performed and the color assessment (∆L*, ∆a*, ∆b*, ∆E_ab [CIELab], ∆E₀₀ [CIEDE2000] and WI_D) was performed before, 24h after each session, 7 days and 1 month after the last session. Data were evaluated by two-way repeated measures ANOVA and Bonferroni post-test at a significance level of 5%.

RESULTS

All groups showed effective and similar results over 1 month of follow-up (p > 0.05), with only intragroup differences among the time intervals (p < 0.05).

CONCLUSIONS

The use of 15% HP photoactivated with blue or violet LED showed similar whitening efficacy compared to 35% HP. Thus, the association of low concentration bleaching gels with LED sources can provide a successful and less aggressive treatment in terms of color change.

Effect of irrigation protocols on chemical smear layer formation over the post-space dentin

This study evaluated the effect of irrigation protocols using 95% ethanol (ET) or 1% peracetic acid (PA) prior the use of 2% chlorhexidine (CHX) compared to distilled water (DW) on the chemical smear layer (CSL) formation and incidence of open dentin tubules at the apical, medium, and cervical third of the post-space dentin. Scanning electron microscopy (SEM) and electron dispersive spectroscopy (EDS) images were used. Forty bovine roots were endodontically treated. After, post-space preparation was performed and the roots were randomized in four groups (n = 10) according to the irrigation protocol: DW, CHX, CHX-ET and CHX-PA. The chemical composition of CSL and the incidence of open dentin tubules at the post-space thirds were evaluated by EDS (500× magnification) and SEM (2000× magnification) images, respectively. Data from chemical composition of CSL were descriptively analyzed, while the incidence of open dentin tubules was evaluated by scores and submitted to Kruskal-Wallis and Dunn test (p = .05). Cl, Bi, and Si were the chemical elements most found over the dentin after the irrigation with CHX and CHX-ET. Moreover, CHX and CHX-ET showed the highest incidence of CSL (p < .05), but without difference between them (p > .05), regardless of the post-space third. DW and CHX-PA showed similar incidence of CSL (p > .05). No difference on the incidence of open dentin tubules was found for any irrigation protocol and post-space third (p > .05). The use of 1% PA prior the post-space irrigation with CHX decrease the incidence of CSL. RESEARCH HIGHLIGHTS: The post-space irrigation with chlorhexidine results in the formation of chemical smear layer. Ethanol is not capable to remove the chemical smear layer. Peracetic acid is more effective to remove the chemical smear layer.