The effect of the type of cement on early revision of Charnley total hip prostheses. A review of eight thousand five hundred and seventy-nine primary arthroplasties from the Norwegian Arthroplasty Register

The 'Japanese paradox' of total hip arthroplasty: where are we going?

INTRODUCTION

There is a worldwide trend toward 'revisiting' cemented total hip arthroplasty (THA). In Japan, however, cemented THAs accounts for 11%, and the percentage of cemented hemiarthroplasty is estimated to be less than 10%. This review was designed to reconsider the option of cemented THA and to encourage policy changes in Japan to support the best possible care for patients.

AREA COVERED

In this article, we reviewed the history of THA and the current situations of the world, based on past reports and nationwide registries. Merits and demerits of cemented THA were evaluated from various perspectives.

EXPERT OPINION

Cemented THA had great advantages, including establishment of the acetabular cup, diversity of the femoral stem, antibiotic-loaded acrylic cement, revision, low incidence of periprosthetic fracture, and hemiarthroplasty. In patients older than 75 years of age, cemented THA resulted in the lowest risk of revision. Guidelines for femoral neck fracture recommended the use of cemented hemiarthroplasty in many countries because of low incidence of periprosthetic fracture. Numerous contradictions regarding implant price and cost of operations have also been noted in Japan. For the patients, we need to rethink what is truth and what is fiction.

Origin of proximal femur fracture classification and their namegivers

Due to the high incidence of proximal femoral fractures, classifications of these fractures are often used in daily practice. Most classifications are eponymous terms since they bear the name of the person(s) who developed them. In this study we provide an insight in the origin of the classifications and the background of their name givers. The clinical implication and background of the eponymous proximal femur fracture classifications of Garden, Pauwels and Evans-Jensen are discussed. With the rising use of modern classification systems, the relevance of historically important classifications is food for discussion. Nevertheless, these classification systems are still used in daily communication and decision making.

Bone Cement in Adult Hip and Knee Reconstruction: A Review of Commercially Available Options and Clinical Outcomes

Polymethyl-methacrylate (PMMA) bone cement is used extensively in hip and knee arthroplasty. A thorough understanding of the basic chemistry underlying PMMA is important for orthopaedic surgeons because this underscores the specific way bone cement is used during surgery. Recently, clinical research has shed light on the various types of PMMA regarding the viscosity of the mixture and the effect of cement additives. These variations in composition may alter the clinical efficacy of implanted bone cement in hip and knee arthroplasty. Understanding these key differences will allow the surgeon to tailor the PMMA composition as needed to maximize outcomes of hip and knee arthroplasty. This review will summarize the preclinical feature of PMMA, evaluate current and past commercially available bone cement options, analyze preclinical results and clinical outcomes of various bone cement types, and highlight future areas of research.

Cemented Femoral Stem Fixation: Back to the Future

BACKGROUND

Periprosthetic fractures following elective and non-elective hip arthroplasty remain one of the most common modes of early failure.

METHODS

This symposium will explore the current role of cemented fixation and periprosthetic fracture, focusing on history and rationale for cemented stem fixation, registry data and other potential advantages of cemented stem fixation. A meticulous and methodical surgical technique of cemented stem fixation is paramount to the success and will be thoroughly discussed.

RESULTS

The role of stem fixation, and its effect on periprosthetic fracture is well-documented in the literature. Yet despite this, the utilization of cemented stem fixation remains low in the United States. This paradox is multifactorial.

CONCLUSIONS

In addition to a notable reduction in the risk of periprosthetic femur fractures, cemented stem fixation has numerous other advantages and is reproducible with a methodical surgical technique.

Femoral Stem Cementation in Primary Total Hip Arthroplasty

➢

Femoral stem cementation has undergone considerable investigation since bone cement was first used in arthroplasty, leading to the evolution of modern femoral stem cementation techniques.

➢

Although there is a worldwide trend toward the use of cementless components, cemented femoral stems have shown superiority in some studies and have clear indications in specific populations.

➢

There is a large evidence base regarding cement properties, preparation, and application techniques that underlie current beliefs and practice, but considerable controversy still exists.

➢

Although the cementing process adds technical complexity to total hip arthroplasty, growing evidence supports its use in certain cohorts. As such, it is critical that orthopaedic surgeons and investigators have a thorough understanding of the fundamentals and evidence underlying modern cementation techniques.

Kaplan-Meier and Cox Regression Are Preferable for the Analysis of Time to Revision of Joint Arthroplasty: Thirty-One Years of Follow-up for Cemented and Uncemented THAs Inserted From 1987 to 2000 in the Norwegian Arthroplasty Register

Background:

Previous studies have suggested that the probability function of 1 minus the Kaplan-Meier survivorship overestimates revision rates of implants and that patient death should be included in estimates as a competing risk factor. The present study aims to demonstrate that this line of thinking is incorrect and is a misunderstanding of both the Kaplan-Meier method and competing risks.

Methods:

This study demonstrated the differences, misunderstandings, and interpretations of classical, competing-risk, and illness-death models with use of data from the Norwegian Arthroplasty Register for 15,734 cemented and 7,867 uncemented total hip arthroplasties (THAs) performed from 1987 to 2000, with fixation as the exposure variable.

Results:

The mean age was higher for patients who underwent cemented (72 years) versus uncemented THA (53 years); as such, a greater proportion of patients who underwent cemented THA had died during the time of the study (47% compared with 29%). The risk of revision at 20 years was 18% for cemented and 42% for uncemented THAs. The cumulative incidence function at 20 years was 11% for cemented and 36% for uncemented THAs. The prevalence of revision at 20 years was 6% for cemented and 31% for uncemented THAs.

Conclusions:

Adding death as a competing risk will always attenuate the probability of revision and does not correct for dependency between patient death and THA revision. Adjustment for age and sex almost eliminated differences in risk estimates between the different regression models. In the analysis of time until revision of joint replacements, classical survival analyses are appropriate and should be advocated.

Level of Evidence:

Prognostic Level III. See Instructions for Authors for a complete description of levels of evidence.

Epidemiological Trends of Anterior Cruciate Ligament Reconstruction in a Canadian Province

OBJECTIVE

To determine epidemiological trends of anterior cruciate ligament reconstruction (ACL-R) in a Canadian province, estimate the national incidence, and compare with internationally published data.

DESIGN

Retrospective review.

SETTING

All hospitals that performed ACL reconstructions in Manitoba between 1980 and 2015.

PARTICIPANT

All patients that underwent ACL-R in Manitoba between 1980 and 2015.

INTERVENTION

This is a retrospective review looking at deidentified, individual-level administrative records of health services used for the entire population of Manitoba (approximately 1.3 million). Codes for ACL and cruciate ligament reconstruction were searched from 1980 to 2015. Patient demographics included age, sex, geographic area of residence, and neighborhood income quintile.

MAIN OUTCOME MEASURES

Trends of ACL reconstructions from 1980 to 2015.

RESULTS

A total of 10 114 ACL-R were performed during the 36-year study period and patients were predominantly male (63.1%). The mean age at ACL-R was 29.5 years (SD 10.0) for males and 28.5 years (SD 11.9) for females, whereas age younger than 40 years accounted for 81.7% of all ACL-R. The incidence of ACL-R increased from 7.56/100 000 inhabitants in 1980 to 48.45/100 000 in 2015. The proportion of females undergoing ACL-R has increased from 29.3% in 1980% to 41.9% in 2015, and female patients now comprise the majority of ACL-R in the under-20 age category.

CONCLUSION

The incidence of ACL-R has significantly increased since 1980; female patients now make up a greater proportion than males of the ACL-R population younger than 20 years. This information can be used to guide resource allocation planning and focus injury prevention initiatives.

Is the use of antibiotic-loaded bone cement associated with a lower risk of revision after primary total hip arthroplasty?

AIMS

The aim of this study was to investigate whether the use of antibiotic-loaded bone cement influenced the risk of revision surgery after primary total hip arthroplasty (THA) for osteoarthritis.

METHODS

The study involved data collected by the National Joint Registry (NJR) for England and Wales, Northern Ireland and the Isle of Man between 1 September 2005 and 31 August 2017. Cox proportional hazards were used to investigate the association between use of antibiotic-loaded bone cement and the risk of revision due to prosthetic joint infection (PJI), with adjustments made for the year of the initial procedure, age at the time of surgery, sex, American Society of Anesthesiologists (ASA) grade, head size, and body mass index (BMI). We looked also at the association between use of antibiotic-loaded bone cement and the risk of revision due to aseptic loosening or osteolysis.

RESULTS

The cohort included 418,857 THAs of whom 397,896 had received antibiotic-loaded bone cement and 20,961 plain cement. After adjusting for putative confounding factors, the risk of revision for PJI was lower in those in whom antibiotic-loaded bone cement was used (hazard ration (HR) 0.79; 95% confidence interval (CI) 0.64 to 0.98). There was also a protective effect on the risk of revision due to aseptic loosening or osteolysis, in the period of > 4.1 years after primary THA, HR 0.57, 95% CI 0.45, 0.72.

CONCLUSION

Within the limits of registry analysis, this study showed an association between the use of antibiotic-loaded bone cement and lower rates of revision due to PJI. The findings support the continued use of antibiotic-loaded bone cement in cemented THA. Cite this article: Bone Joint J 2020;102-B(8):997-1002.

Fixation of the short global tissue-sparing hip stem

AIMS

Short, bone-conserving femoral components are increasingly used in total hip arthroplasty (THA). They are expected to allow tissue-conserving implantation and to render future revision surgery more straightforward but the long-term data on such components is limited. One such component is the global tissue-sparing (GTS) stem. Following the model for stepwise introduction of new orthopaedic implants, we evaluated early implant fixation and clinical outcome of this novel short-stem THA and compared it to that of a component with established good long-term clinical outcome.

METHODS

In total, 50 consecutive patients ≤ 70 years old with end-stage symptomatic osteo-arthritis were randomized to receive THA with the GTS stem or the conventional Taperloc stem using the anterior supine intermuscular approach by two experienced hip surgeons in two hospitals in the Netherlands. Primary outcome was implant migration. Patients were followed using routine clinical examination, patient reported outcome using Harris Hip Score (HHS), Hip Disability And Osteoarthritis Outcome Score (HOOS), EuroQol five-dimension questionnaire (EQ5D), and Roentgen Stereophotogrammetric Analysis (RSA) at three, six, 12, and 24 months. This study evaluated the two-year follow-up results.

RESULTS

In addition to the initial migration pattern of distal migration (subsidence, Y-translation) and retroversion (Y-rotation) also exhibited by the Taperloc stem, the GTS stem showed an initial migration pattern of varization (X-translation combined with Z-rotation) and posterior translation (Z-translation). However, all components stabilized aside from one Taperloc stem which became loose secondary to malposition and was later revised. Clinical outcomes and complications were not statistically significantly different with the numbers available.

CONCLUSION

A substantially different and more extensive initial migration pattern was seen for the GTS stem compared to the Taperloc stem. Although implant stabilization was achieved, excellent long-term survival similar to that of the Taperloc stem should not be inferred. Especially in the absence of clinically proven relevant improvement, widespread usage should be postponed until long-term safety has been established. Cite this article: Bone Joint J 2020;102-B(6):699-708.

Current concepts and outcomes in cemented femoral stem design and cementation techniques: the argument for a new classification system

Cemented implant fixation design principles have evolved since the 1950s, and various femoral stem designs are currently in use to provide a stable construct between the implant-cement and cement-bone interfaces.Cemented stems have classically been classified into two broad categories: taper slip or force closed, and composite beams or shaped closed designs. While these simplifications are acceptable general categories, there are other important surgical details that need to be taken into consideration such as different broaching techniques, cementing techniques and mantle thickness.With the evolution of cemented implants, the introduction of newer implants which have hybrid properties, and the use of different broaching techniques, the classification of a very heterogenous group of implants into simple binary categories becomes increasingly difficult. A more comprehensive classification system would aid in comparison of results and better understanding of the implants' biomechanics.We review these differing stem designs, their respective cementing techniques and geometries. We then propose a simple four-part classification system and summarize the long-term outcomes and international registry data for each respective type of cemented prosthesis. Cite this article: EFORT Open Rev 2020;5:241-252. DOI: 10.1302/2058-5241.5.190034.

Antibiotic-loaded bone cement is associated with a lower risk of revision following primary cemented total knee arthroplasty: an analysis of 731,214 cases using National Joint Registry data

AIMS

Antibiotic-loaded bone cements (ALBCs) may offer early protection against the formation of bacterial biofilm after joint arthroplasty. Use in hip arthroplasty is widely accepted, but there is a lack of evidence in total knee arthroplasty (TKA). The objective of this study was to evaluate the use of ALBC in a large population of TKA patients.

MATERIALS AND METHODS

Data from the National Joint Registry (NJR) of England and Wales were obtained for all primary cemented TKAs between March 2003 and July 2016. Patient, implant, and surgical variables were analyzed. Cox proportional hazards models were used to assess the influence of ALBC on risk of revision. Body mass index (BMI) data were available in a subset of patients.

RESULTS

Of 731 214 TKAs, 15 295 (2.1%) were implanted with plain cement and 715 919 (97.9%) with ALBC. There were 13 391 revisions; 2391 were performed for infection. After adjusting for other variables, ALBC had a significantly lower risk of revision for any cause (hazard ratio (HR) 0.85, 95% confidence interval (CI) 0.77 to 0.93; p < 0.001). ALBC was associated with a lower risk of revision for all aseptic causes (HR 0.85, 95% CI 0.77 to 0.95; p < 0.001) and revisions for infection (HR 0.84, 95% CI 0.67 to 1.01; p = 0.06). The results were similar when BMI was added into the model, and in a subanalysis where surgeons using only ALBC over the entire study period were excluded. Prosthesis survival at ten years for TKAs implanted with ALBC was 96.3% (95% CI 96.3 to 96.4) compared with 95.5% (95% CI 95.0 to 95.9) in those implanted with plain cement. On a population level, where 100 000 TKAs are performed annually, this difference represents 870 fewer revisions at ten years in the ALBC group.

CONCLUSION

After adjusting for a range of variables, ALBC was associated with a significantly lower risk of revision in this registry-based study of an entire nation of primary cemented knee arthroplasties. Using ALBC does not appear to increase midterm implant failure rates. Cite this article: Bone Joint J 2019;101-B:1331-1347.

Long-term outcome of cemented total hip arthroplasty with the Charnley-type femoral stem made of titanium alloy

BACKGROUND

Total hip arthroplasty is a successful treatment for hip diseases including osteoarthritis, osteonecrosis of the femoral head, and rheumatoid arthritis. Various designs of cemented femoral stems made of stainless steel and titanium alloy have been used. Among them, Charnley-type femoral stems made of stainless steel have often been reported to have good long-term outcome. However, the long-term outcome of the Charnley-type femoral stem made of Ti alloy is yet to be reported. We conducted a retrospective study to assess the long-term outcome of cemented primary total hip arthroplasty with the Charnley-type femoral stem made of Ti alloy.

METHODS

Between October 1988 and February 1997, 341 cemented primary total hip arthroplasties with the Charnley-type femoral stem made of Ti alloy were consecutively performed in our hospital. Among these, 164 patients (211 hips) who underwent this procedure were followed up for more than 12 years, and the surgical hips were analysed clinically and radiologically. The mean follow-up period was 20.6 years. Kaplan-Meier survival analyses were performed to assess femoral component survival. Factors affecting stem revision for aseptic loosening were also investigated using log-rank tests.

RESULTS

In the functional assessment, the preoperative Japanese Orthopaedic Association score significantly improved from 47.2 points preoperatively to 79.0 points at the final follow-up. Eventually, 33 femoral stems were revised, of which 12 were revised for aseptic loosening. In the Kaplan-Meier survival analysis, the 20-year survival rates with stem revision for aseptic loosening and radiological stem loosening at the end points were 95.9% and 97.1%, respectively. Original diagnosis (non-osteoarthritis) was the only significant factor for aseptic loosening of the femoral stem.

CONCLUSIONS

Cemented primary total hip arthroplasty with the Charnley-type femoral stem made of Ti alloy showed excellent outcomes for more than 20 years.

The use of a bioactive bone cement containing apatite-wollastonite glass-ceramic filler and bisphenol-a-glycidyl methacrylate resin for acetabular fixation in total hip arthroplasty

Aims

In the 1990s, a bioactive bone cement (BABC) containing apatite-wollastonite glass-ceramic (AW-GC) powder and bisphenol-a-glycidyl methacrylate resin was developed at our hospital. In 1996, we used BABC to fix the acetabular component in primary total hip arthroplasty (THA) in 20 patients as part of a clinical trial. The purpose of this study was to investigate the long-term results of primary THA using BABC.

Patients and Methods

A total of 20 patients (three men and 17 women) with a mean age of 57.4 years (40 to 71), a mean body weight of 52.3 kg (39 to 64), and a mean body mass index (BMI) of 23.0 kg/m2 (19.8 to 28.6) were evaluated clinically and radiologically. Survival analyses were undertaken, and wear analyses were carried out using a computer-aided method.

Results

The mean follow-up was 17.6 years (1.5 to 21.1). Radiological loosening occurred in four sockets with aseptic loosening at a mean of 7.8 years (1.5 to 20.7). Kaplan–Meier survival analyses using revision of the acetabular component, radiological loosening of the acetabular component, and the worst-case scenario with revision of the acetabular component to include the two patients lost to follow-up as endpoints yielded survival rates of 94.7%, 84.4%, and 85.0% at ten years, and 70.0%, 84.4%, and 62.8% at 20 years, respectively. Wear analysis revealed a mean linear wear rate of 0.068 mm per year.

Conclusion

The long-term results of primary THAs using BABC were unsatisfactory. Its brittle nature and poor handling properties need to be improved before it becomes an alternative method of fixing the acetabular component in cemented THA. Cite this article: Bone Joint J 2019;101-B:787–792.

Impact of hip arthroplasty registers on orthopaedic practice and perspectives for the future

Total hip arthroplasty (THA) registers are established in several countries to collect data aiming to improve the results after THA. Monitoring of adverse outcomes after THA has focused mainly on revision surgery, but patient-reported outcomes have also been investigated.Several surgery-related factors influencing the survival of the THA have been thoroughly investigated and have changed clinical practice. These factors include surgical approach, specific implants, the size of the components, type of fixation and different bone cements.Register data have been used to examine the risk of venous thromboembolism and bleeding after THA. These investigations have resulted in shorter duration of thromboprophylaxis and a reduced frequency of blood transfusion.Registers may provide specific information to surgeons on the outcome of all THAs that they have performed with a detailed analysis of revisions rates and reasons for the revisions.A number of other stakeholders can use register data to provide benchmarks. The National Joint Registry for England, Wales, Northern Ireland and the Isle of Man supplies data to the Orthopaedic Device Evaluation Panel (ODEP), which provides benchmarks at 3, 5, 7, 10, and 13 years graded from A*, A, B and C.Future perspectives: National registers have to play a major role in documenting the quality of THA in order to describe best practice and report implant outliers. The registers have to be used for research and post-market surveillance and register data may be a source for intelligent decision tools. Cite this article: EFORT Open Rev 2019;4 DOI: 10.1302/2058-5241.4.180091.

Cemented Femoral Component Use in Hip Arthroplasty

Elderly patients undergoing both elective and nonelective hip arthroplasty contribute markedly to health care spending, and the current aging population is likely to require even more resources. Several national joint replacement registries show a lower risk of revision surgery in patients older than 75 years who received cemented femoral components compared with cementless implants for primary total hip arthroplasty. Despite a higher incidence of early periprosthetic femoral fracture, noncemented femoral components are being used with increasing frequency in elderly patients worldwide. Improvements in cementing technique and modifications to cemented stem design over several decades allow surgeons to obtain femoral component fixation in poor-quality bone with a relatively low risk of complications. Achieving durable cemented stem fixation requires the surgeon to understand the basic handling properties of cement, how to prepare the femoral bone, and differences in stem design and surface finish.

The association between cement type and the subsequent risk of revision surgery in primary total hip replacement

Background and purpose - To further improve the success of joint replacement surgery, attention needs to be paid to variations associated with improved or worsened outcomes. We investigated the association between the type of bone cement used and the risk of revision surgery after primary total hip replacement. Methods - We conducted a prospective study of data from the National Joint Registry for England and Wales between April 1, 2003 and December 31, 2013. 199,205 primary total hip replacements performed for osteoarthritis where bone cement was used were included. A multilevel over-dispersed piecewise Poisson model was used to estimate differences in the rate of revision by bone cement type adjusted for implant type, head size, age, sex, ASA grade, and surgical approach. Results - The rate of revision was higher in DePuy CMW3 medium viscosity with gentamicin (IRR 2.0, 95% CI 1.5-2.7) and DePuy SmartSet high viscosity plain (IRR 2.7, 95% CI 1.1-5.5), and lower in DePuy CMW1 high viscosity plain (IRR 0.44, 95% CI 0.19-0.89) bone cements compared with Heraeus Palacos high viscosity with gentamicin. Revision rates were similar between plain and antibiotic-loaded bone cement. Interpretation - The majority of bone cements performed similarly well, excluding DePuy SmartSet high viscosity and CMW3 high viscosity with gentamicin, which both had higher revision rates. We found no clear differences by viscosity or antibiotic content.

Long-term survival of the cemented Müller CDH stem: a minimum follow-up of 10 years

INTRODUCTION

Total hip arthroplasty in patients with altered anatomy of the hip and femur, such as in congenital dysplasia of the hip, is challenging and often requires specially designed stems. Müller straight stems have shown excellent long-term results; however, long-term data on the analogous cemented Müller CDH stem are still missing. The aim of this study was to analyze long-term survival, identify potential risk factors for aseptic loosening, and analyze radiological outcome of the cemented Müller CDH stems.

MATERIALS AND METHODS

Between 01/1985 and 06/2005, 95 Müller CDH stems (Zimmer, Winterthur, Switzerland) made up of 3 different materials were cemented using 2 different bone cements: 38 of stainless steel/high-viscosity cement, 31 of a cobalt-chrome-based alloy (CoCr)/low-viscosity cement, and 26 of a titanium-based alloy (Ti)/low-viscosity cement. All patients had a prospective clinical and radiological follow-up according to the standards of our institution. The cumulative incidence for revision of the stem was calculated using a competing risk model. To identify demographic and implant-related risk factors for aseptic loosening of the stem, a multivariate regression model for competing risks was performed.

RESULTS

The cumulative risk of revision at 15 years was 12.5% (95% CI 6.6-20.5%) for aseptic loosening of the stem as endpoint, with marked differences for the various stem materials used: stainless steel 2.7% (0.2-12.3%), CoCr 12.9% (4.0-27.3%), and Ti 24.5% (9.6-43.1%). Regression modeling revealed that Ti stems in combination with low-viscosity cement (HR 10.2) and implantation with an axis deviation greater than 3° (HR 3.8) are risk factors for aseptic loosening.

CONCLUSIONS

Long-term survival of the cemented Müller CDH stem is comparable to other Müller-type straight stems and uncemented implants. Similar to the original Ti Müller straight stem, the Ti Müller CDH stem also showed an increased risk for aseptic loosening and should, therefore, no longer be used.

Advantages and limitations of national arthroplasty registries. The need for multicenter registries: the Rempro-SBQ

While the value of national arthroplasty registries (NAR) for quality improvement in total hip arthroplasty (THA) has already been widely reported, some methodological limitations associated with observational epidemiological studies that may interfere with the assessment of safety and efficacy of prosthetic implants have recently been described in the literature.

Among the main limitations of NAR, the need for at least 80% compliance of all health institutions covered by the registry is emphasized; completeness equal or greater than 90% of all THA performed; restricted data collection; use of revision surgery as the sole criterion for outcome; and the inability of establishing a definite causal link with prosthetic dysfunction.

The present article evaluates the advantages and limitations of NAR, in the light of current knowledge, which point to the need for a broader data collection and the use of more structured criteria for defining outcomes.

In this scenario, the authors describe of idealization, conceptual and operational structure, and the project of implantation and implementation of a multicenter registry model, called Rempro-SBQ, which includes healthcare institutions already linked to the Brazilian Hip Society (Sociedade Brasileira de Quadril [SBQ]). This partnership enables the collection of more reliable and comprehensive data at a higher hierarchical level, with a significant reduction in maintenance and financing costs. The quality improvement actions supported by SBQ may enhance its effectiveness and stimulate greater adherence for collecting, storing, interpreting, and disseminating information (feedback).

Magnetically controlled growing rods in the treatment of early-onset scoliosis

The MAGnetic Expansion Control (MAGEC) system is used increasingly in the management of early-onset scoliosis. Good results have been published, but there have been recent reports identifying implant failures that may be associated with significant metallosis surrounding the implants. This article aims to present the current knowledge regarding the performance of this implant, and the potential implications and strategies that may be employed to identify and limit any problems.

We urge surgeons to apply caution to patient and construct selection; engage in prospective patient registration using a spine registry; ensure close clinical monitoring until growth has ceased; and send all explanted MAGEC rods for independent analysis.

The MAGEC system may be a good instrumentation system for the treatment of early-onset scoliosis. However, it is innovative and like all new technology, especially when deployed in a paediatric population, robust systems to assess long-term outcome are required to ensure that patient safety is maintained.

Cite this article: Bone Joint J 2017;99-B:708–13.

Bone cement product and failure in total knee arthroplasty

Background and purpose - The bone cement market for total knee arthroplasty (TKA) in Norway has been dominated by a few products and distributors. Palacos with gentamicin had a market share exceeding 90% before 2005, but it was then withdrawn from the market and replaced by new slightly altered products. We have compared the survival of TKAs fixated with Palacos with gentamicin with the survival of TKAs fixated with the bone cements that took over the market. Patients and methods - Using data from the Norwegian Arthroplasty Register for the period 1997-2013, we included 26,147 primary TKAs in the study. The inclusion criteria were TKAs fixated with the 5 most used bone cements and the 5 most common total knee prostheses for that time period. 6-year Kaplan-Meier survival probabilities were established for each cement product. The Cox proportional hazards regression model was used to assess the association between bone cement product and revision risk. Separate analyses were performed with revision for any reason and revision due to deep infection within 1 year postoperatively as endpoints. Adjustments were made for age, sex, diagnosis, and prosthesis brand. Results - Survival was similar for the prostheses in the follow-up period, between the 5 bone cements included: Palacos with gentamicin, Refobacin Palacos R, Refobacin Bone Cement R (Refobacin BCR), Optipac Refobacin Bone Cement R (Optipac Refobacin BCR), and Palacos R + G. Interpretation - According to our findings, the use of the new bone cements led to a survival rate that was as good as with the old bone cement (Palacos with gentamicin).

Implant survival of the most common cemented total hip devices from the Nordic Arthroplasty Register Association database

Background and purpose - According to previous Nordic Arthroplasty Register Association (NARA) data, the 10-year implant survival of cemented total hip arthroplasties (THAs) is 94% in patients aged 65-74 and 96% in patients aged 75 or more. Here we report a brand-level comparison of cemented THA based on the NARA database, which has not been done previously. Patients and methods - We determined the rate of implant survival of the 9 most common cemented THAs in the NARA database. We used Kaplan-Meier analysis with 95% CI to study implant survival at 10 and 15 years, and Cox multiple regression to assess survival and hazard ratios (HRs), with revision for any reason as endpoint and with adjustment for age, sex, diagnosis, and femoral head material. Results - Spectron EF THA (89.9% (CI: 89.3-90.5)) and Elite THA (89.8% (CI: 89.0-90.6)) had the lowest 10-year survivorship. Lubinus (95.7% survival, CI: 95.5-95.9), MS 30 (96.6%, CI: 95.8-97.4), and C-stem THA (95.8%, CI: 94.8-96.8) had a 10-year survivorship of at least 95%. Lubinus (revision risk (RR) = 0.77, CI: 0.73-0.81), Müller (RR =0.83, CI: 0.70-0.99), MS-30 (RR =0.73, CI: 0.63-0.86), C-stem (RR =0.70, CI: 0.55-0.90), and Exeter Duration THA (RR =0.84, CI: 0.77-0.90) had a lower risk of revision than Charnley THA, the reference implant. Interpretation - The Spectron EF THA and the Elite THA had a lower implant survival than the Charnley, Exeter, and Lubinus THAs. Implant survival of the Müller, MS 30, CPT, and C-stem THAs was above the acceptable limit for 10-year survival.

Palacos compared to Palamed bone cement in total hip replacement: a randomized controlled trial

Background and purpose - Stability and survival of cemented total hip prostheses is dependent on a multitude of factors, including the type of cement that is used. Bone cements vary in viscosity, from low to medium and high. There have been few clinical RSA studies comparing the performance of low- and high-viscosity bone cements. We compared the migration behavior of the Stanmore hip stem cemented using novel low-viscosity Palamed bone cement with that of the same stem cemented with conventional high-viscosity Palacos bone cement. Patients and methods - We performed a randomized controlled study involving 39 patients (40 hips) undergoing primary total hip replacement for primary or secondary osteoarthritis. 22 patients (22 hips) were randomized to Palacos and 17 patients (18 hips) were randomized to Palamed. Migration was determined by RSA. Results - None of these 40 hips had been revised at the 10-year follow-up mark. To our knowledge, the patients who died before they reached the 10-year endpoint still had the implant in situ. No statistically significant or clinically significant differences were found between the 2 groups for mean translations, rotations, and maximum total-point motion (MTPM). Interpretation - We found similar migration of the Stanmore stem in the high-viscosity Palacos cement group and the low-viscosity Palamed cement group. We therefore expect that the risk of aseptic loosening with the new Palamed cement would be comparable to that with the conventional Palacos cement. The choice of which type of bone cement to use is therefore up to the surgeon's preference.

Emperor's new clothes: Is particle disease really infected particle disease?

Aseptic loosening remains the most significant long-term complication of total hip replacement. The current paradigm points to an inflammatory response to wear particles as its main trigger. Recently, there have been increasing numbers of positive bacterial isolates reported among patients with clinically absent infection. This paper reviews existing evidence on possible involvement of bacteria and microbial-associated molecular patterns in the pathology of so-called "aseptic loosening." © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 34:1497-1504, 2016.

Surrogate markers of long-term outcome in primary total hip arthroplasty: A systematic review

Objectives

High failure rates of metal-on-metal hip arthroplasty implants have highlighted the need for more careful introduction and monitoring of new implants and for the evaluation of the safety of medical devices. The National Joint Registry and other regulatory services are unable to detect failing implants at an early enough stage. We aimed to identify validated surrogate markers of long-term outcome in patients undergoing primary total hip arthroplasty (THA).

Methods

We conducted a systematic review of studies evaluating surrogate markers for predicting long-term outcome in primary THA. Long-term outcome was defined as revision rate of an implant at ten years according to National Institute of Health and Care Excellence guidelines. We conducted a search of Medline and Embase (OVID) databases. Separate search strategies were devised for the Cochrane database and Google Scholar. Each search was performed to include articles from the date of their inception to June 8, 2015.

Results

Our search strategy identified 1082 studies of which 115 studies were included for full article review. Following review, 17 articles were found that investigated surrogate markers of long-term outcome. These included one systematic review, one randomised control trial (RCT), one case control study and 13 case series. Validated surrogate markers included Radiostereometric Analysis (RSA) and Einzel-Bild-Röntgen-Analyse (EBRA), each measuring implant migration and wear. We identified five RSA studies (one systematic review and four case series) and four EBRA studies (one RCT and three case series). Patient Reported Outcome Measures (PROMs) at six months have been investigated but have not been validated against long-term outcomes.

Conclusions

This systematic review identified two validated surrogate markers of long-term primary THA outcome: RSA and EBRA, each measuring implant migration and wear. We recommend the consideration of RSA in the pre-market testing of new implants. EBRA can be used to investigate acetabular wear but not femoral migration. Further studies are needed to validate the use of PROMs for post-market surveillance.

Cite this article: T. T. Malak, J. A. J. Broomfield, A. J. R. Palmer, S. Hopewell, A. Carr, C. Brown, D. Prieto-Alhambra, S. Glyn-Jones. Surrogate markers of long-term outcome in primary total hip arthroplasty: A systematic review. Bone Joint Res 2016;5:206–214. DOI: 10.1302/2046-3758.56.2000568.

Arthroscopic anatomic double bundle anterior cruciate ligament reconstruction: Our experience with follow-up of 4 years

BACKGROUND

Double bundle (DB) anterior cruciate ligament (ACL) reconstruction has been proposed to recreate the natural anatomy of ACL. Reconstruction of the anatomy of both the bundles of ACL has been thought to be able to restore the rotational stability of the knee joint. Nevertheless, it remains unclear whether DB reconstruction has better functional outcome than single bundle (SB) ACL reconstruction.

PURPOSE

To evaluate the clinical outcomes, patient satisfaction and manual laxity tests of knee in patients treated with DB ACL reconstruction in Indian population.

METHODS

We prospectively followed 25 patients with an isolated ACL injury operated for DB ACL reconstruction after applying the inclusion and exclusion criteria. Patients were evaluated pre-operatively and in the post-operative period at regular intervals with the minimum follow up of 4 years. Clinical stability was assessed by anterior drawer test, Lachman test and pivot shift test. Functional outcome was assessed by IKDC, Lysholm and Modified Cincinnati scores.

RESULTS

At the end of 4 years, functional outcome in terms of all subjective scores was satisfactory. Graded stability results of the Lachman, Anterior drawer and pivot shift tests were almost near to that in normal knee. No complication occurred post-operatively.

CONCLUSION

Anatomical DB ACL reconstruction seems to offer satisfactory results in terms of subjective scores and stability tests to patients with ACL tear. It has been found to be associated with no obvious complications and no failures. However a larger patient pool is desired for conclusive results.

Distributed analysis of hip implants using six national and regional registries: comparing metal-on-metal with metal-on-highly cross-linked polyethylene bearings in cementless total hip arthroplasty in young patients

BACKGROUND

The regulation of medical devices has attracted controversy recently because of problems related to metal-on-metal hip implants. There is growing evidence that metal-on-metal implants fail early and cause local and systemic complications. However, the failure associated with metal-on-metal head size is not consistently documented and needs to be communicated to patients and surgeons. The purpose of this study is to compare implant survival of metal on metal with that of metal on highly cross-linked polyethylene.

METHODS

Using a distributed health data network, primary total hip arthroplasties were identified from six national and regional total joint arthroplasty registries (2001 to 2010). Inclusion criteria were patient age of forty-five to sixty-four years, cementless total hip arthroplasties, primary osteoarthritis diagnosis, and exclusion of the well-known outlier implant ASR (articular surface replacement). The primary outcome was revision for any reason. A meta-analysis of survival probabilities was performed with use of a fixed-effects model. Metal-on-metal implants with a large head size of >36 mm were compared with metal-on-highly cross-linked polyethylene implants.

RESULTS

Metal-on-metal implants with a large head size of >36 mm were used in 5172 hips and metal-on-highly cross-linked polyethylene implants were used in 14,372 hips. Metal-on-metal total hip replacements with a large head size of >36 mm had an increased risk of revision compared with metal-on-highly cross-linked polyethylene total hip replacements with more than two years of follow-up, with no difference during the first two years after implantation. The results of the hazard ratios (and 95% confidence intervals) from the multivariable model at various durations of follow-up were 0.95 (0.74 to 1.23) at zero to two years (p = 0.698), 1.42 (1.16 to 1.75) at more than two years to four years (p = 0.001), 1.78 (1.45 to 2.19) at more than four years to six years (p < 0.001), and 2.15 (1.63 to 2.83) at more than six years to seven years (p < 0.001).

CONCLUSIONS

We conducted a comparison of large-head-size, metal-on-metal implants and metal-on-highly cross-linked polyethylene implants in younger patients with uncemented fixation. We found consistent and strong evidence worldwide that large-head-size, metal-on-metal implants were associated with increased risk of revision after two years compared with metal-on-highly cross-linked polyethylene implants, with the effect becoming more pronounced over time.

Comparison of Refobacin bone cement and palacos with gentamicin in total hip arthroplasty: an RSA study with two years follow-up

Previous experience has demonstrated the importance of testing new bone cement in vivo before widespread clinical use. We performed a consecutive, radiostereometric (RSA) study comparing Refobacin Bone Cement (RBC) to the well proven Palacos with Gentamicin (PWG). According to the manufacturer of RBC it has the equivalent characteristics as PWG, and in vitro tests show good results. The purpose of this study was to evaluate whether RBC is safe to use in clinical practice for total hip arthroplasty (THA). Two consecutive series of patients with primary osteoarthritis received a THA using a highly polished, collarless, tapered stem with a hollow centralizer. The study comprises 21 hips with RBC and 30 with PWG. The patients were followed up for two years with repeated RSA examinations and clinical outcome questionnaires SF-12 and WOMAC. There were no statistically significant migratory differences between the groups. The mean subsidence after two years was 1.28 mm and 1.40 mm, and the mean retroversion was 1.03° and 0.99°, for the RBC and the PWG groups respectively. Almost all migration occurred in the interface between the stem and the cement. The WOMAC and SF12 clinical scores did not reveal any clinical differences between the groups. We conclude that, as previous in vitro tests indicate, RBC performs as well as PWG and seems to be safe to use in clinical practice for THA.

Adherence of hip and knee arthroplasty studies to RSA standardization guidelines. A systematic review

BACKGROUND AND PURPOSE

Guidelines for standardization of radiostereometry (RSA) of implants were published in 2005 to facilitate comparison of outcomes between various research groups. In this systematic review, we determined how well studies have adhered to these guidelines.

METHODS

We carried out a literature search to identify all articles published between January 2000 and December 2011 that used RSA in the evaluation of hip or knee prosthesis migration. 2 investigators independently evaluated each of the studies for adherence to the 13 individual guideline items. Since some of the 13 points included more than 1 criterion, studies were assessed on whether each point was fully met, partially met, or not met.

RESULTS

153 studies that met our inclusion criteria were identified. 61 of these were published before the guidelines were introduced (2000-2005) and 92 after the guidelines were introduced (2006-2011). The methodological quality of RSA studies clearly improved from 2000 to 2011. None of the studies fully met all 13 guidelines. Nearly half (43) of the studies published after the guidelines demonstrated a high methodological quality and adhered at least partially to 10 of the 13 guidelines, whereas less than one-fifth (11) of the studies published before the guidelines had the same methodological quality. Commonly unaddressed guideline items were related to imaging methodology, determination of precision from double examinations, and also mean error of rigid-body fitting and condition number cutoff levels.

INTERPRETATION

The guidelines have improved methodological reporting in RSA studies, but adherence to these guidelines is still relatively low. There is a need to update and clarify the guidelines for clinical hip and knee arthroplasty RSA studies.

Does adding antibiotics to cement reduce the need for early revision in total knee arthroplasty?

BACKGROUND

There is considerable debate about whether antibiotic-loaded bone cement should be used for fixation of TKAs. While antibiotics offer the theoretical benefit of lowering early revision due to infection, they may weaken the cement and thus increase the likelihood of aseptic loosening, perhaps resulting in a higher revision rate.

QUESTIONS/PURPOSES

We (1) compared the frequency of early knee revision arthroplasty in patients treated with antibiotic-loaded or non-antibiotic-loaded cement for initial fixation, (2) determined effects of age, sex, comorbidities, and surgeons' antibiotic-loaded cement usage patterns on revision rate, and (3) compared causes of revision (aseptic or septic) between groups.

METHODS

Our study sample was taken from the Canadian Joint Replacement Registry and Canada's Hospital Morbidity Database and included cemented TKAs performed between April 1, 2003, and March 31, 2008, including 20,016 TKAs inserted with non-antibiotic-loaded cement and 16,665 inserted with antibiotic-loaded cement. Chi-square test was used to compare the frequency of early revisions between groups. Cox regression modeling was used to determine whether revision rate would change by age, sex, comorbidities, or use of antibiotic-loaded cement. Similar Cox regression modeling was used to compare cause of revision between groups.

RESULTS

Two-year revision rates were similar between the groups treated with non-antibiotic-loaded cement and antibiotic-loaded cement (1.40% versus 1.51%, p = 0.41). When controlling for age, sex, comorbidities, diabetes, and surgeons' antibiotic-loaded cement usage patterns, the revision risk likewise was similar between groups. Revision rates for infection were similar between groups; however, there were more revisions for aseptic loosening in the group treated with non-antibiotic-loaded cement (p = 0.02).

CONCLUSIONS

The use of antibiotic-loaded cement in TKAs performed for osteoarthritis has no clinically significant effect on reducing revision within 2 years in patients who received perioperative antibiotics. Longer followup and confirmation of these findings with other national registries are warranted.

A systematic review and meta-analysis of antibiotic-impregnated bone cement use in primary total hip or knee arthroplasty

Background

Antibiotic-impregnated bone cement (AIBC) has been widely used for the treatment of infected revision arthroplasty, but its routine use in primary total joint arthroplasty (TJA) remains considerably controversial. With this meta-analysis of published randomized controlled trials, we intended to assess the antimicrobial efficacy and safety of AIBC for its prophylactic use in primary TJA.

Methods

A literature search was performed in MEDLINE, Embase, CBMdisc and the Cochrane Library until June, 2013. The studies were divided into two sub-groups according to the type of the control group. Outcomes of interest included postoperative infection rates, radiographic outcomes and clinical joint score. Study quality was evaluated using the Jadad scale (five points).

Results

In total, eight studies were included, with a sample size of 6,381 arthroplasties. The overall pooled data demonstrated that, compared with the control (plain cement or systemic antibiotic), AIBC did not reveal an advantage in decreasing the rate of superficial infection (relative risk [RR] = 1.47; 95% CI, 1.13–1.91; P=0.004), while there were significant differences in deep infection rate between the AIBC and control group (RR = 0.41; 95% CI, 0.17–0.97; P=0.04). For the analysis of gentamicin and cefuroxime subgroups, the gentamicin was superior to the cefuroxime in reducing deep infection rate (P=0.0005 versus P= 0.10). However, no significant differences were found in their radiographic outcomes and clinical joint score.

Conclusion

This meta-analysis had proven that the prophylactic use of AIBC could lower the deep infection rate in primary TJA, while AIBC did not show an improvement in reducing the superficial infection rate compared with the control. More sufficiently powered studies would be required to further evaluate the efficacy and safety of AIBC for primary TJA.

Surgical approach and prosthesis fixation in hip arthroplasty world wide

BACKGROUND

Hip arthroplasty is one of the most common and successful surgical procedures worldwide. Component design and materials as well as surgical techniques constantly evolve. There is no consensus among surgeons regarding the ideal surgical approach and method of fixation.

MATERIALS AND METHODS

292 orthopedic surgeons of 10 subspecialties from 57 countries were surveyed on their choice of surgical approach and prosthesis fixation in hip arthroplasty. Their preferences were analyzed according to country of origin, field of expertise and seniority, and compared to current publications.

RESULTS

The response rate was 95-98 %. Surgeons were split between the posterior approach (45 %) and the direct lateral approach (42 %) followed by the anterior approach (10 %) or other (3 %). North American surgeons favored the posterior approach more often than Europeans (69 % compared to 36 %, P < 0.0001) and surgeons from other countries (69 % compared to 45 %, P = 0.01). Sixty-eight percent of all surgeons routinely used noncemented hip prosthesis while 16 % use cemented and 16 % hybrid fixation. Noncemented fixation was preferred among surgeons from Europe and North America compared to other countries (73 % compared to 55 %, P < 0.05). There were no significant differences based on subspecialty, seniority or the number of years of experience.

CONCLUSIONS

The most common surgical approaches in use in hip arthroplasty are posterior and lateral. Anterior approach is used by a minority of orthopedic surgeons for that purpose. Cementing hip prosthesis is falling out of favor among orthopedic surgeons worldwide. The trend toward un-cemented hip arthroplasty is not well supported in the current literature.

Experimental investigation of the effect of surface roughness on bone-cement-implant shear bond strength

Debonding of cemented bone implants is regarded as a major contributor to complications. The relationship between shear bond strength and surface roughness has been investigated, however there are inconsistencies in the trends reported in different studies. The shear strength between poly(methyl methacrylate) bone-cement and sand blasted cobalt-chromium and titanium alloy surfaces was measured to investigate the relationship between interfacial shear strength and surface topology. Surface roughness was quantified by a power law relationship fitted to Fourier spectra as well as three traditional parameters (arithmetical average roughness (Ra), volume of interdigitation (Rr), and RMS slope (Rdq)). We found that the interfacial shear strength is directly proportional to the exponent of the surfaces power spectra (P2) and Rdq, but not to Ra and Rr. However, Rdq is shown to be critically dependent on sampling frequency, making it sensitive to measurement settings. P2 was found to be a robust measure of the surface roughness being independent of sampling frequency.

Must bilaterality be considered in statistical analyses of total knee arthroplasty?

BACKGROUND

In studies of TKA, treating each knee as an independent case in patients with bilateral TKAs can lead to errors, because patients with bilateral and unilateral TKAs may achieve different levels of function and because the assumption of statistical independence is violated.

QUESTIONS/PURPOSES

We determined whether (1) patients undergoing bilateral TKAs have different demographics and preoperative and postoperative function from those undergoing unilateral TKAs, and (2) means, SEs, and p values change substantially based on how the two cases of bilateral TKAs are treated in statistical analyses.

METHODS

We retrospectively compared 513 patients undergoing unilateral TKAs and 602 patients undergoing bilateral TKAs regarding demographics (age, gender, BMI), preoperative and 1-year postoperative function (motion arc, American Knee Society score, patellofemoral score, WOMAC(TM), SF-36). Each case of a bilateral TKA was treated as independent in the reference analyses. Then changes of mean, SEs, and p values were compared with those of the reference method when three other methods of analysis were used: using mean values of both knees, randomly selecting one side, and using a generalized estimating equation.

RESULTS

Patients undergoing bilateral TKAs had higher female predominance (95% versus 90%) and BMI (27.4 versus 26.1 kg/m(2)) than those undergoing unilateral TKAs. Although patients undergoing bilateral TKAs had worse preoperative function, they achieved comparable function at 1 year. The mean values did not differ considerably depending on the four methods. The SEs and p values of the reference method were generally the smallest, but the differences appeared negligible.

CONCLUSIONS

Our analyses suggest bilaterality can be ignored in the analysis of TKA, since postoperative function is comparable between unilateral and bilateral TKAs and the theoretical errors in statistical analysis had little effect on the results.

Coordinating retrieval and register studies improves postmarket surveillance

BACKGROUND

The relative risk of revision of the Titan(®) femoral stem due to aseptic loosening increased after 2000; however, the reasons for this have not been established. A retrieval analysis was initiated with the aim of delineating the failure mechanism.

QUESTIONS/PURPOSES

We asked whether aseptic loosening in stems after 2000 was associated with (1) appearance of osteolytic lesions, (2) wear particle exposure, (3) stem damage, or (4) changes to the implant or surgical instrumentation.

METHODS

Femoral stems, cement, tissue, and radiographs were collected from 28 patients. We assessed the development of osteolytic lesions in 17 patients. Exposure to wear particles was quantified in 18 patients. Stem damage was assessed in 15 patients. We observed differences in the implants by examination of 24 retrieved stems. Information concerning changes to instrumentation was requested from the manufacturer.

RESULTS

We found osteolysis in all patients receiving implants after 2000, which was associated with a median dose of cement and stem particles of 14,726/mm(2). Abrasion covered 59% of the surface of stems implanted from 1999. We identified geometric changes to the stem, the percent weight of aluminum in the stem's oxide layer decreased from 25% to 14% after 1997 and the rasp used to prepare the femoral cavity changed to a broach in 1999.

CONCLUSIONS

Stems implanted from 2000 failed through osteolysis induced by particles released from the cement and implant. Changes to implant geometry, surface oxide layer, and surgical tools occurred in the same time frame as the reduction in survivorship.

Good diagnostic performance of early migration as a predictor of late aseptic loosening of acetabular cups: results from ten years of follow-up with Roentgen stereophotogrammetric analysis (RSA)

BACKGROUND

Excessive early migration of femoral stems following total hip arthroplasty and tibial components following total knee arthroplasty is associated with their long-term survival and allows reliable early evaluation of implant performance. However, a similar relationship involving acetabular components following hip arthroplasty has not been evaluated. This prospective, long-term study with clinical and Roentgen stereophotogrammetric analysis (RSA) follow-up establishes the existence of this relationship and its associated diagnostic performance.

METHODS

Thirty-nine consecutive patients (forty-one hips) who underwent total hip arthroplasty with a cemented Exeter stem and a cemented Exeter all-polyethylene cup had prospective clinical and RSA follow-up. Patients were evaluated postoperatively at six weeks, at three, six, and twelve months, and annually thereafter. Conventional anteroposterior and lateral radiographs were made at six weeks and at two, five, and ten years postoperatively as well as when indicated. The mean duration of follow-up (and standard deviation) was 9.4 ± 3.2 years. No patients were lost to follow-up; fifteen patients died during the follow-up period.

RESULTS

Eleven acetabular components were observed to be loose on conventional radiographs after a mean of seventy-six months (range, twelve to 140 months). During the first two postoperative years, the failed acetabular components showed markedly greater and more rapid cranial translation and sagittal rotation. Both cranial translation (hazard ratio = 19.9 [95% confidence interval, 4.94 to 80.0], p < 0.001) and sagittal rotation (hazard ratio = 11.1 [95% confidence interval, 2.83 to 43.9], p = 0.001) were strong risk factors for late aseptic loosening. Eight of the eleven failed components showed a distinctive pattern of excessive cranial translation combined with excessive sagittal rotation. The associated diagnostic performance of two-year cranial translation and/or sagittal rotation for predicting late aseptic loosening of the acetabular component was good (area under the receiver operating characteristic curve, 0.88 [95% confidence interval, 0.74 to 1.00; p < 0.001] and 0.84 [95% confidence interval, 0.68 to 1.00; p = 0.001], respectively).

CONCLUSIONS

Early migration, as measured by RSA at two years postoperatively, has good diagnostic capabilities for the detection of acetabular components at risk for future aseptic loosening, and this method appears to be an appropriate means of assessing the performance of new implants or implant-related changes.

The effect of adding tobramycin to Simplex P cement on femoral stem micromotion as measured by radiostereometric analysis: a 2-year randomized controlled trial

BACKGROUND

Previous in vitro research on addition of antibiotics to bone cement has found no statistically significant deterioration in mechanical properties. However, no clinical studies have compared the performance of tobramycin-laden bone cement with that of standard bone cement (Simplex P).

PATIENTS AND METHODS

23 patients (25 hips) were randomized to receive an Exeter (Stryker Orthopaedics) femoral stem cemented with either Simplex P (standard) or Simplex T (tobramycin-laden) cement. There were 2 years of follow-up, with scheduled radiostereometric (RSA) examinations.

RESULTS

All stems migrated distally and showed some degree of retroversion. No clinically significant differences in stem subsidence or retroversion were found between the Simplex T and Simplex P cement groups after 2 years. Overall subsidence was less than in previous studies, probably due to a postponed initial post-surgical examination. Rates of subsidence in both cement groups were consistent with those from previous studies of Exeter stems.

INTERPRETATION

Subsidence of the femoral stem after 2 years was similar in the Simplex T (tobramycin-laden) and Simplex P (standard) groups.

Is there still a place for the cemented titanium femoral stem? 10,108 cases from the Norwegian Arthroplasty Register

BACKGROUND AND PURPOSE

Despite the fact that there have been some reports on poor performance, titanium femoral stems intended for cemented fixation are still used at some centers in Europe. In this population-based registry study, we examined the results of the most frequently used cemented titanium stem in Norway.

PATIENTS AND METHODS

11,876 cases implanted with the cemented Titan stem were identified for the period 1987-2008. Hybrid arthroplasties were excluded, leaving 10,108 cases for this study. Stem survival and the influence of age, sex, stem offset and size, and femoral head size were evaluated using Cox regression analyses. Questionnaires were sent to the hospitals to determine the surgical technique used.

RESULTS

Male sex, high stem offset, and small stem size were found to be risk factors for stem revision, (adjusted RR = 2.5 (1.9-3.4), 3.3 (2.3-4.8), and 2.2 (1.4-3.5), respectively). Patients operated in the period 2001-2008 had an adjusted relative risk (RR) of 4.7 (95% CI: 3.0-7.4) for stem revision due to aseptic stem loosening compared to the period 1996-2000. Changes in broaching technique and cementing technique coincided with deterioration of the results in some hospitals.

INTERPRETATION

The increased use of small stem sizes and high-offset stems could only explain the deterioration of results to a certain degree since the year 2000. The influence of discrete changes in surgical technique over time could not be fully evaluated in this registry study. We suggest that this cemented titanium stem should be abandoned. The results of similar implants should be carefully evaluated.

A Scandinavian experience of register collaboration: the Nordic Arthroplasty Register Association (NARA)

BACKGROUND

The Nordic (Scandinavian) countries have had working arthroplasty registers for several years. However, the small numbers of inhabitants and the conformity within each country with respect to preferred prosthesis brands and techniques have limited register research.

METHODS

A collaboration called NARA (Nordic Arthroplasty Register Association) was started in 2007, resulting in a common database for Denmark, Norway, and Sweden with regard to hip replacements in 2008 and primary knee replacements in 2009. Finland joined the project in 2010. A code set was defined for the parameters that all registers had in common, and data were re-coded, within each national register, according to the common definitions. After de-identification of the patients, the anonymous data were merged into a common database. The first study based on this common database included 280,201 hip arthroplasties and the second, 151,814 knee arthroplasties. Kaplan-Meier and Cox multiple regression analyses, with adjustment for age, sex, and diagnosis, were used to calculate prosthesis survival, with any revision as the end point. In later studies, specific reasons for revision were also used as end points.

RESULTS

We found differences among the countries concerning patient demographics, preferred surgical approaches, fixation methods, and prosthesis brands. Prosthesis survival was best in Sweden, where cement implant fixation was used more commonly than it was in the other countries.

CONCLUSIONS

As the comparison of national results was one of the main initial aims of this collaboration, only parameters and data that all three registers could deliver were included in the database. Compared with each separate register, this combined register resulted in reduced numbers of parameters and details. In future collaborations of registers with a focus on comparing the performances of prostheses and articulations, we should probably include only the data needed specifically for the predetermined purposes, from registers that can deliver these data, rather than compiling all data from all registers that are willing to participate.

Is reverse hybrid hip replacement the solution?

BACKGROUND AND PURPOSE

Reverse hybrid hip replacement uses a cemented all-polyethylene cup and an uncemented stem. Despite increasing use of this method in Scandinavia, there has been very little documentation of results. We have therefore analyzed the results from the Norwegian Arthroplasty Register (NAR), with up to 10 years of follow-up.

PATIENTS AND METHODS

The NAR has been collecting data on total hip replacement (THR) since 1987. Reverse hybrid hip replacements were used mainly from 2000. We extracted data on reverse hybrid THR from this year onward until December 31, 2009, and compared the results with those from cemented implants over the same period. Specific cup/stem combinations involving 100 cases or more were selected. In addition, only combinations that were taken into use in 2005 or earlier were included. 3,963 operations in 3,630 patients were included. We used the Kaplan-Meier method and Cox regression analysis for estimation of prosthesis survival and relative risk of revision. The main endpoint was revision for any cause, but we also performed specific analyses on different reasons for revision.

RESULTS

We found equal survival to that from cemented THR at 5 years (cemented: 97.0% (95% CI: 96.8-97.2); reverse hybrid: 96.7% (96.0-97.4)) and at 7 years (cemented: 96.0% (95.7-96.2); reverse hybrid: 95.6% (94.4-96.7)). Adjusted relative risk of revision of the reverse hybrids was 1.1 (0.9-1.4). In patients under 60 years of age, we found similar survival of the 2 groups at 5 and 7 years, with an adjusted relative risk of revision of reverse hybrids of 0.9 (0.6-1.3) compared to cemented implants.

INTERPRETATION

With a follow-up of up to 10 years, reverse hybrid THRs performed well, and similarly to all-cemented THRs from the same time period. The reverse hybrid method might therefore be an alternative to all-cemented THR. Longer follow-up time is needed to evaluate whether reverse hybrid hip replacement has any advantages over all-cemented THR.

Statistical analysis of arthroplasty data. II. Guidelines

It is envisaged that guidelines for statistical analysis and presentation of results will improve the quality and value of research. The Nordic Arthroplasty Register Association (NARA) has therefore developed guidelines for the statistical analysis of arthroplasty register data. The guidelines are divided into two parts, one with an introduction and a discussion of the background to the guidelines (Ranstam et al. 2011a, see pages x-y in this issue), and this one with a more technical statistical discussion on how specific problems can be handled. This second part contains (1) recommendations for the interpretation of methods used to calculate survival, (2) recommendations on howto deal with bilateral observations, and (3) a discussion of problems and pitfalls associated with analysis of factors that influence survival or comparisons between outcomes extracted from different hospitals.

High medium-term survivorship and durability of Zweymüller-Plus total hip arthroplasty

BACKGROUND AND PURPOSE

The Zweymüller-Plus system (SL-Plus stem, Bicon-Plus threaded cup) for primary total hip arthroplasty (THA) was introduced in 1993, as a successor of the Alloclassic THA with a few modifications in the conical stem shape and a new biconical threaded cup with a spherical shape. The medium-term performance of this system is not well established. To better understand the potential impact these design changes have had on (1) survivorship, (2) implant stability and (3) periprosthetic osteolysis, we studied patients who underwent THA using the SL-Plus stem and Bicon-Plus.

METHODS

We retrospectively reviewed the cases of 148 patients (153 hips) who underwent Zweymüller-Plus primary THA after an average of 11 years.

RESULTS

With revision for aseptic failure of biological fixation as the endpoint, survivorship was 98% for the stem and 100% for the cup. Focal osteolysis was observed in 6.6% of cups and 29% of stems. Four hips (2.6%) were revised because of aseptic failure of the biologic fixation and three hips (1.95%) for deep infection. As much as 146 stems and 149 cups were evaluated to be stable.

CONCLUSION

Zweymüller-Plus THA resulted in high survivorship and durability at 11 years, although the rate of osteolysis around the stem indicated polyethylene wear.

Timing of femoral prosthesis insertion during cemented arthroplasty: cement curing and static mechanical strength in an in vivo model

BACKGROUND

Modern cementing techniques aim to fix the implanted femoral prosthesis in the medullary cavity to minimize long-term complications such as aseptic loosening. The cure stage of bone cement into which the femoral component is being inserted is an important variable that is decided at the time of surgery. Late-cure cement is more viscous than early-cure cement and requires greater force on the part of the surgeon to insert the femoral prosthesis. We compared 2 cementing techniques, femoral component insertion into early-cure cement and insertion into late-cure cement, using an in vivo model to identify if cement cure stage affects the strength of the bone-cement interface.

METHODS

We performed bilateral hemiarthroplasties using only the femoral component in vivo on paired porcine femora. The femora were harvested and cross-sectioned in preparation for strength testing. We measured bond strength by peak load required to push the femoral prosthesis and surrounding cement mantle free of the cancellous bone.

RESULTS

All radiographs showed good cement interdigitation with no evidence of radiolucent lines at the bone-cement interface. We could not differentiate the early-cure and late-cure groups on postoperative radiographs. The mean failure load for the late-cure arthroplasties was 908 N (standard deviation [SD] 420 N), whereas the mean failure load for the conjugate early-cure arthroplasties was 503 N (SD 342 N).

CONCLUSION

Femoral component insertion into late-cure cement required significantly higher loads for push-out than femoral component insertion into early-cure cement.

Improved results of primary total hip replacement

BACKGROUND AND PURPOSE

Over the past 20 years, several changes in treatment policy and treatment options have taken place regarding hip replacement. For this reason, we wanted to investigate the results after hip replacement in terms of revision rate, during a 21-year period among hip replacements reported to the Norwegian Arthroplasty Register.

METHODS

110,882 primary total hip replacements were reported to the Norwegian Arthroplasty Register from 1987 through 2007. Risk of revision during the time periods 1993-1997, 1998-2002, and 2003-2007 was compared to that of the reference period 1987-1992. Adjusted Cox regression analyses were performed to compare the risk of revision in different time periods and extended analyses were done to investigate revision within the first postoperative year and after the first year.

RESULTS

There was an overall reduced risk of revision in the time periods 1993-1997, 1998-2002, and 2003-2007 compared to the reference period: RR = 0.81 (95% CI 0.77-0.86), 0.51 (CI 0.47-0.55), and 0.77 (CI 0.68-0.85), respectively. The improved results were due to a marked reduction in aseptic loosening of the femoral and acetabular components in all time periods and in all subgroups of prostheses. A change in the timing of revision took place, with more early revisions and fewer late revisions in the later time periods. Revision due to dislocation and infection increased over time.

INTERPRETATION

The risk of revision decreased during the study period, due to fewer cases of aseptic loosening of prosthetic components. The best results were obtained with the use of cemented prostheses. Prevention of dislocation and infection should be a major goal in the future, as revision due to these causes increased during the study period.

Twenty-year results of the cementless Corail stem

The concept of an extensive hydroxyapatite (HA) coating for the fixation of a tapered femoral stem (Corail®) was introduced 25 years ago in the hope that we could achieve durable biological fixation while preserving normal periprosthetic bone activity. The value of uncemented fixation using HA-coated implants is now widely admitted. However, the characteristics of implant coating and more specifically its extent still remain a subject of debate or even controversy. This prospective study conducted over a 20-year period has greatly contributed to demonstrating the reliability of the Corail® prosthesis, in terms of functional abilities, radiographic evidence and global survivorship. A full HA coating applied on a straight and proximally flared stem induces substantial short-, mid- and long-term benefits without any deleterious effects reported. Modifications of the bone pattern have been strictly limited: slight resorption at the calcar level, absence of cortical hypertrophy and alleged stress shielding. The radiological "silence" is one of the paramount facts clearly demonstrated.

[Minimal provider volume in total knee replacement : an analysis of the external quality assurance program of North Rhine-Westphalia (QS-NRW)]

BACKGROUND

A minimal provider volume for total knee replacement (TKR) was introduced in 2006. Does this lead to an improvenment in quality or not? The records of treatment in the compulsory external quality assurance program of the Land of North Rhine-Westphalia (QS-NRW) were evaluated.

METHOD

A total of 125,324 comparable records from the QS-NRW program were available to determine the appearance of general and surgical complications. In a logistical regression model the risk factors age, gender, ASA classification, comorbidity and duration were taken into account.

RESULTS

A significant reduction could only be shown for pneumonia, thrombotic events and lung embolisms as well as vascular injury. In 2006 and 2007 malpositioning of implants was significantly higher and from 2005 to 2008 the number of fractures rose compared to 2004. Deep infections and reoperations did not change significantly during the whole study period.

CONCLUSION

This evaluation could not show an improvement in quality due to the minimal provider volume. Thus the minimal provider volume should not be taken into account as a main criterion to improve quality. Further outcome studies and creating an arthroplasty register in Germany are more useful.

Randomised controlled trial comparing early migration of two collarless polished cemented stems using radiostereometric analysis

This was a safety study where the hypothesis was that the newer-design CPCS femoral stem would demonstrate similar early clinical results and micromovement to the well-established Exeter stem. Both are collarless, tapered, polished cemented stems, the only difference being a slight lateral to medial taper with the CPCS stem. A total of 34 patients were enrolled in a single-blinded randomised controlled trial in which 17 patients received a dedicated radiostereometric CPCS stem and 17 a radiostereometric Exeter stem. No difference was found in any of the outcome measures pre-operatively or post-operatively between groups. At two years, the mean subsidence for the CPCS stem was nearly half that seen for the Exeter stem (0.77 mm (−0.943 to 1.77) and 1.25 mm (0.719 to 1.625), respectively; p = 0.032). In contrast, the mean internal rotation of the CPCS stem was approximately twice that of the Exeter (1.61° (−1.07° to 4.33°) and 0.59° (0.97° to 1.64°), respectively; p = 0.048). Other migration patterns were not significantly different between the stems. The subtle differences in designs may explain the different patterns of migration.

Comparable migration with the Exeter stem suggests that the CPCS design will perform well in the long term.