Sequence analysis of the gliding protein Gli349 in Mycoplasma mobile

Host-gut microbiota interactions shape parasite infections in farmed Atlantic salmon

Animals and their associated microbiota share long evolutionary histories. However, it is not always clear how host genotype and microbiota interact to affect phenotype. We applied a hologenomic approach to explore how host-microbiota interactions shape lifetime growth and parasite infection in farmed Atlantic salmon (Salmo salar). Multi-omics data sets were generated from the guts of 460 salmon, 82% of which were naturally infected with an intestinal cestode. A single Mycoplasma bacterial strain, MAG01, dominated the gut metagenome of large, non-parasitized fish, consistent with previous studies showing high levels of Mycoplasma in the gut microbiota of healthy salmon. While small and/or parasitized salmon also had high abundance of MAG01, we observed increased alpha diversity in these individuals, driven by increased frequency of low-abundance Vibrionaceae and other Mycoplasma species that carried known virulence genes. Colonization by one of these cestode-associated Mycoplasma strains was associated with host individual genomic variation in long non-coding RNAs. Integrating the multi-omic data sets revealed coordinated changes in the salmon gut mRNA transcriptome and metabolome that correlated with shifts in the microbiota of smaller, parasitized fish. Our results suggest that the gut microbiota of small and/or parasitized fish is in a state of dysbiosis that partly depends on the host genotype, highlighting the value of using a hologenomic approach to incorporate the microbiota into the study of host-parasite dynamics.IMPORTANCEStudying host-microbiota interactions through the perspective of the hologenome is gaining interest across all life sciences. Intestinal parasite infections are a huge burden on human and animal health; however, there are few studies investigating the role of the hologenome during parasite infections. We address this gap in the largest multi-omics fish microbiota study to date using natural cestode infection of farmed Atlantic salmon. We find a clear association between cestode infection, salmon lifetime growth, and perturbation of the salmon gut microbiota. Furthermore, we provide the first evidence that the genetic background of the host may partly determine how the gut microbiota changes during parasite-associated dysbiosis. Our study therefore highlights the value of a hologenomic approach for gaining a more in-depth understanding of parasitism.

Motility Assays of Mycoplasma mobile Under Light Microscopy

Mycoplasma mobile forms a membrane protrusion at a pole as an organelle. M. mobile cells bind to solid surfaces and glide in the direction of the protrusion. In gliding motility, M. mobile cells catch, pull and release sialylated oligosaccharides on host cells. The observation of Mycoplasma species under light microscopy is useful for the analysis of adhesion ability and the motility mechanism.

Purification and Structural Analysis of the Gliding Motility Machinery in Mycoplasma mobile

Isolating functional units from large insoluble protein complexes are a complex but valuable approach for quantitative and structural analysis. Mycoplasma mobile, a gliding bacterium, contains a large insoluble protein complex called gliding machinery. The machinery contains several chain structures formed by motors that are evolutionarily related to the F₁-ATPase. Recently, we developed a method to purify functional motors and their chain structures using Triton X-100 and a high salt concentration buffer and resolved their structures using electron microscopy. In this chapter, we describe the processes of purification and structural analysis of functional motors for the gliding of M. mobile using negative-staining electron microscopy.

Chained Structure of Dimeric F1-like ATPase in Mycoplasma mobile Gliding Machinery

Mycoplasma mobile, a fish pathogen, exhibits gliding motility using ATP hydrolysis on solid surfaces, including animal cells. The gliding machinery can be divided into surface and internal structures. The internal structure of the motor is composed of 28 so-called “chains” that are each composed of 17 repeating protein units called “particles.” These proteins include homologs of the catalytic α and β subunits of F₁-ATPase. In this study, we isolated the particles and determined their structures using negative-staining electron microscopy and high-speed atomic force microscopy. The isolated particles were composed of five proteins, MMOB1660 (α-subunit homolog), -1670 (β-subunit homolog), -1630, -1620, and -4530, and showed ATP hydrolyzing activity. The two-dimensional (2D) structure, with dimensions of 35 and 26 nm, showed a dimer of hexameric ring approximately 12 nm in diameter, resembling F₁-ATPase catalytic (αβ)₃. We isolated the F₁-like ATPase unit, which is composed of MMOB1660, -1670, and -1630. Furthermore, we isolated the chain and analyzed the three-dimensional (3D) structure, showing that dimers of mushroom-like structures resembling F₁-ATPase were connected and aligned along the dimer axis at 31-nm intervals. An atomic model of F₁-ATPase catalytic (αβ)₃ from Bacillus PS3 was successfully fitted to each hexameric ring of the mushroom-like structure. These results suggest that the motor for M. mobile gliding shares an evolutionary origin with F₁-ATPase. Based on the obtained structure, we propose possible force transmission processes in the gliding mechanism.

Movements of Mycoplasma mobile Gliding Machinery Detected by High-Speed Atomic Force Microscopy

Mycoplasma mobile, a parasitic bacterium, glides on solid surfaces, such as animal cells and glass, by a special mechanism. This process is driven by the force generated through ATP hydrolysis on an internal structure. However, the spatial and temporal behaviors of the internal structures in living cells are unclear. In this study, we detected the movements of the internal structure by scanning cells immobilized on a glass substrate using high-speed atomic force microscopy (HS-AFM). By scanning the surface of a cell, we succeeded in visualizing particles, 2 nm in height and aligned mostly along the cell axis with a pitch of 31.5 nm, consistent with previously reported features based on electron microscopy. Movements of individual particles were then analyzed by HS-AFM. In the presence of sodium azide, the average speed of particle movements was reduced, suggesting that movement is linked to ATP hydrolysis. Partial inhibition of the reaction by sodium azide enabled us to analyze particle behavior in detail, showing that the particles move 9 nm right, relative to the gliding direction, and 2 nm into the cell interior in 330 ms and then return to their original position, based on ATP hydrolysis.

Identification and sequence analyses of the gliding machinery proteins from Mycoplasma mobile

Mycoplasma mobile, a fish pathogen, exhibits its own specialized gliding motility on host cells based on ATP hydrolysis. The special protein machinery enabling this motility is composed of surface and internal protein complexes. Four proteins, MMOBs 1630, 1660, 1670, and 4860 constitute the internal complex, including paralogs of F-type ATPase/synthase α and β subunits. In the present study, the cellular localisation for the candidate gliding machinery proteins, MMOBs 1620, 1640, 1650, and 5430 was investigated by using a total internal reflection fluorescence microscopy system after tagging these proteins with the enhanced yellow fluorescent protein (EYFP). The M. mobile strain expressing a fusion protein MMOB1620-EYFP exhibited reduced cell-binding activity and a strain expressing MMOB1640 fused with EYFP exhibited increased gliding speed, showing the involvement of these proteins in the gliding mechanism. Based on the genomic sequences, we analysed the sequence conservativity in the proteins of the internal and the surface complexes from four gliding mycoplasma species. The proteins in the internal complex were more conserved compared to the surface complex, suggesting that the surface complex undergoes modifications depending on the host. The analyses suggested that the internal gliding complex was highly conserved probably due to its role in the motility mechanism.

Refined Mechanism of Mycoplasma mobile Gliding Based on Structure, ATPase Activity, and Sialic Acid Binding of Machinery

Mycoplasma mobile, a fish pathogen, glides on solid surfaces by repeated catch, pull, and release of sialylated oligosaccharides by a unique mechanism based on ATP energy. The gliding machinery is composed of huge surface proteins and an internal "jellyfish"-like structure. Here, we elucidated the detailed three-dimensional structures of the machinery by electron cryotomography. The internal "tentacle"-like structure hydrolyzed ATP, which was consistent with the fact that the paralogs of the α- and β-subunits of F₁-ATPase are at the tentacle structure. The electron microscopy suggested conformational changes of the tentacle structure depending on the presence of ATP analogs. The gliding machinery was isolated and showed that the binding activity to sialylated oligosaccharide was higher in the presence of ADP than in the presence of ATP. Based on these results, we proposed a model to explain the mechanism of M. mobile gliding.IMPORTANCE The genus Mycoplasma is made up of the smallest parasitic and sometimes commensal bacteria; Mycoplasma pneumoniae, which causes human "walking pneumonia," is representative. More than ten Mycoplasma species glide on host tissues by novel mechanisms, always in the direction of the distal side of the machinery. Mycoplasma mobile, the fastest species in the genus, catches, pulls, and releases sialylated oligosaccharides (SOs), the carbohydrate molecules also targeted by influenza viruses, by means of a specific receptor and using ATP hydrolysis for energy. Here, the architecture of the gliding machinery was visualized three dimensionally by electron cryotomography (ECT), and changes in the structure and binding activity coupled to ATP hydrolysis were discovered. Based on the results, a refined mechanism was proposed for this unique motility.

Identification of novel protein domain for sialyloligosaccharide binding essential to Mycoplasma mobile gliding

Sialic acids, terminal structures of sialylated glycoconjugates, are widely distributed in animal tissues and are often involved in intercellular recognitions, including some bacteria and viruses. Mycoplasma mobile, a fish pathogenic bacterium, binds to sialyloligosaccharide (SO) through adhesin Gli349 and glides on host cell surfaces. The amino acid sequence of Gli349 shows no similarity to known SO-binding proteins. In the present study, we predicted the binding part of Gli349, produced it in Escherichia coli and proved its binding activity to SOs of fetuin using atomic force microscopy. Binding was detected with a frequency of 10.3% under retraction speed of 400 nm/s and was shown to be specific for SO, as binding events were competitively inhibited by the addition of free 3'-sialyllactose. The histogram of the unbinding forces showed 24 pN and additional peaks. These results suggested that the distal end of Gli349 constitutes a novel sialoadhesin domain and is directly involved in the gliding mechanism of M. mobile.

Detailed Analyses of Stall Force Generation in Mycoplasma mobile Gliding

Mycoplasma mobile is a bacterium that uses a unique mechanism to glide on solid surfaces at a velocity of up to 4.5 μm/s. Its gliding machinery comprises hundreds of units that generate the force for gliding based on the energy derived from ATP; the units catch and pull sialylated oligosaccharides fixed to solid surfaces. In this study, we measured the stall force of wild-type and mutant strains of M. mobile carrying a bead manipulated using optical tweezers. The strains that had been enhanced for binding exhibited weaker stall forces than the wild-type strain, indicating that stall force is related to force generation rather than to binding. The stall force of the wild-type strain decreased linearly from 113 to 19 picoNewtons after the addition of 0-0.5 mM free sialyllactose (a sialylated oligosaccharide), with a decrease in the number of working units. After the addition of 0.5 mM sialyllactose, the cells carrying a bead loaded using optical tweezers exhibited stepwise movements with force increments. The force increments ranged from 1 to 2 picoNewtons. Considering the 70-nm step size, this small-unit force may be explained by the large gear ratio involved in the M. mobile gliding machinery.

Directed Binding of Gliding Bacterium, Mycoplasma mobile, Shown by Detachment Force and Bond Lifetime

Mycoplasma mobile, a fish-pathogenic bacterium, features a protrusion that enables it to glide smoothly on solid surfaces at a velocity of up to 4.5 µm s⁻¹ in the direction of the protrusion. M. mobile glides by a repeated catch-pull-release of sialylated oligosaccharides fixed on a solid surface by hundreds of 50-nm flexible “legs” sticking out from the protrusion. This gliding mechanism may be explained by a possible directed binding of each leg with sialylated oligosaccharides, by which the leg can be detached more easily forward than backward. In the present study, we used a polystyrene bead held by optical tweezers to detach a starved cell at rest from a glass surface coated with sialylated oligosaccharides and concluded that the detachment force forward is 1.6- to 1.8-fold less than that backward, which may be linked to a catch bond-like behavior of the cell. These results suggest that this directed binding has a critical role in the gliding mechanism.

Mycoplasma species are the smallest bacteria and are parasitic and occasionally commensal, as represented by Mycoplasma pneumoniae, which causes so-called “walking pneumonia” in humans. Dozens of species glide on host tissues, always in the direction of the characteristic cellular protrusion, by novel mechanisms. The fastest species, Mycoplasma mobile, catches, pulls, and releases sialylated oligosaccharides (SOs), which are common targets among influenza viruses, by means of a specific receptor based on the energy of ATP hydrolysis. Here, force measurements made with optical tweezers revealed that the force required to detach a cell from SOs is smaller forward than backward along the gliding direction. The directed binding should be a clue to elucidate this novel motility mechanism.

Reprint of “Prospects for the gliding mechanism of Mycoplasma mobile”

Mycoplasma mobile forms gliding machinery at a cell pole and glides continuously in the direction of the cell pole at up to 4.5 μm per second on solid surfaces such as animal cells. This motility system is not related to those of any other bacteria or eukaryotes. M. mobile uses ATP energy to repeatedly catch, pull, and release sialylated oligosaccharides on host cells with its approximately 50-nm long legs. The gliding machinery is a large structure composed of huge surface proteins and internal jellyfish-like structure. This system may have developed from an accidental combination between an adhesin and a rotary ATPase, both of which are essential for the adhesive parasitic life of Mycoplasmas.

Gliding Direction of Mycoplasma mobile

Mycoplasma mobile glides in the direction of its cell pole by a unique mechanism in which hundreds of legs, each protruding from its own gliding unit, catch, pull, and release sialylated oligosaccharides fixed on a solid surface. In this study, we found that 77% of cells glided to the left with a change in direction of 8.4° ± 17.6° μm(-1) displacement. The cell body did not roll around the cell axis, and elongated, thinner cells also glided while tracing a curved trajectory to the left. Under viscous conditions, the range of deviation of the gliding direction decreased. In the presence of 250 μM free sialyllactose, in which the binding of the legs (i.e., the catching of sialylated oligosaccharides) was reduced, 70% and 30% of cells glided to the left and the right, respectively, with changes in direction of ∼30° μm(-1). The gliding ghosts, in which a cell was permeabilized by Triton X-100 and reactivated by ATP, glided more straightly. These results can be explained by the following assumptions based on the suggested gliding machinery and mechanism: (i) the units of gliding machinery may be aligned helically around the cell, (ii) the legs extend via the process of thermal fluctuation and catch the sialylated oligosaccharides, and (iii) the legs generate a propulsion force that is tilted from the cell axis to the left in 70% and to the right in 30% of cells.

IMPORTANCE

Mycoplasmas are bacteria that are generally parasitic to animals and plants. Some Mycoplasma species form a protrusion at a pole, bind to solid surfaces, and glide. Although these species appear to consistently glide in the direction of the protrusion, their exact gliding direction has not been examined. This study analyzed the gliding direction in detail under various conditions and, based on the results, suggested features of the machinery and the mechanism of gliding.

Prospects for the gliding mechanism of Mycoplasma mobile

Mycoplasma mobile forms gliding machinery at a cell pole and glides continuously in the direction of the cell pole at up to 4.5μm per second on solid surfaces such as animal cells. This motility system is not related to those of any other bacteria or eukaryotes. M. mobile uses ATP energy to repeatedly catch, pull, and release sialylated oligosaccharides on host cells with its approximately 50-nm long legs. The gliding machinery is a large structure composed of huge surface proteins and internal jellyfish-like structure. This system may have developed from an accidental combination between an adhesin and a rotary ATPase, both of which are essential for the adhesive parasitic life of Mycoplasmas.

Gliding Motility of Mycoplasma mobile on Uniform Oligosaccharides

The binding and gliding of Mycoplasma mobile on a plastic plate covered by 53 uniform oligosaccharides were analyzed. Mycoplasmas bound to and glided on only 21 of the fixed sialylated oligosaccharides (SOs), showing that sialic acid is essential as the binding target. The affinities were mostly consistent with our previous results on the inhibitory effects of free SOs and suggested that M. mobile recognizes SOs from the nonreducing end with four continuous sites as follows. (i and ii) A sialic acid at the nonreducing end is tightly recognized by tandemly connected two sites. (iii) The third site is recognized by a loose groove that may be affected by branches. (iv) The fourth site is recognized by a large groove that may be enhanced by branches, especially those with a negative charge. The cells glided on uniform SOs in manners apparently similar to those of the gliding on mixed SOs. The gliding speed was related inversely to the mycoplasma's affinity for SO, suggesting that the detaching step may be one of the speed determinants. The cells glided faster and with smaller fluctuations on the uniform SOs than on the mixtures, suggesting that the drag caused by the variation in SOs influences gliding behaviors.

IMPORTANCE

Mycoplasma is a group of bacteria generally parasitic to animals and plants. Some Mycoplasma species form a protrusion at a pole, bind to solid surfaces, and glide in the direction of the protrusion. These procedures are essential for parasitism. Usually, mycoplasmas glide on mixed sialylated oligosaccharides (SOs) derived from glycoprotein and glycolipid. Since gliding motility on uniform oligosaccharides has never been observed, this study gives critical information about recognition and interaction between receptors and SOs.

Whole surface image of Mycoplasma mobile, suggested by protein identification and immunofluorescence microscopy

Mycoplasma mobile, a freshwater fish pathogen featured with robust gliding motility, binds to the surface of the gill, where it then colonizes. Here, to obtain a whole image of its cell surface, we identified the proteins exposed on the surface using the following methods. (i) The cell surface was labeled with sulfosuccinimidyl-6-(biotinamido) hexanoate and recovered by an avidin column. (ii) The cells were subjected to phase partitioning using Triton X-114, and the hydrophobic proteins were recovered. (iii) The membrane fraction was analyzed by two-dimensional gel electrophoresis. These recovered proteins were subjected to peptide mass fingerprinting, and a final list of 36 expressed surface proteins was established. The ratio of identified proteins to whole surface proteins was estimated through two-dimensional gel electrophoresis of the membrane fraction. The localization of three newly found proteins, Mvsps C, E, and F, has been clarified by immunofluorescence microscopy. Integrating all information, a whole image of the cell surface showed that the proteins for gliding that were localized at the base of the protrusion of flask-shaped M. mobile account for more than 12% of all surface proteins and that Mvsps, surface variants that were localized at both parts other than the neck, account for 49% of all surface proteins.

Molecular structure of isolated MvspI, a variable surface protein of the fish pathogen Mycoplasma mobile

Mycoplasma mobile is a parasitic bacterium that causes necrosis in the gills of freshwater fishes. This study examines the molecular structure of its variable surface protein, MvspI, whose open reading frame encodes 2,002 amino acids. MvspI was isolated from mycoplasma cells by a biochemical procedure to 92% homogeneity. Gel filtration and analytical ultracentrifugation suggested that this protein is a cylinder-shaped monomer with axes of 66 and 2.7 nm. Rotary shadowing transmission electron microscopy of MvspI showed that the molecule is composed of two rods 30 and 45 nm long; the latter rod occasionally features a bulge. Immuno-electron microscopy and epitope mapping showed that the bulge end of the molecular image corresponds to the C terminus of the amino acid sequence. Partial digestion by various proteases suggested that the N-terminal part, comprised of 697 amino acids, is flexible. Analysis of the predicted amino acid sequence showed that the molecule features a lipoprotein and 16 repeats of about 90 residues; 15 positions exist between residues 88 and 1479, and the other position is between residues 1725 and 1807. The amino acid sequence of MvspI was mapped onto a molecular image obtained by electron microscopy. The present study is the first to elucidate the molecular shape of a variable surface protein of mycoplasma.

Mycoplasma mobile cells elongated by detergent and their pivoting movements in gliding

Mycoplasma mobile glides on solid surfaces by the repeated binding of leg structures to sialylated oligosaccharide fixed on a solid surface. To obtain information about the propulsion caused by the leg, we made elongated and stiff cells using a detergent. Within 30 min after the cells were treated with 0.1% Tween 60, the cells were elongated from 0.8 μm to 2.2 μm in length while maintaining their gliding activity. Fluorescence and electron microscopy showed that a part of the cytoskeletal structure was elongated, while the localization of proteins involved in the gliding was not modified significantly. The elongated cells glided with repeated pivoting around the cellular position of gliding machinery by 10 degrees of amplitude at a frequency of 2 to 3 times per second, suggesting that the propulsion in a line perpendicular to the cell axis can occur with different timings. The pivoting speed decreased as the cell length increased, probably from the load generated by the friction. The torque required to achieve the actual pivoting increased with the cell length without saturation, reaching 54.7 pN nm at 4.3 μm in cell length.

Unique centipede mechanism of Mycoplasma gliding

Mycoplasma, a genus of pathogenic bacteria, forms a membrane protrusion at a cell pole. It binds to solid surfaces with this protrusion and then glides. The mechanism is not related to known bacterial motility systems, such as flagella or pili, or to conventional motor proteins, including myosin. We have studied the fastest species, Mycoplasma mobile, and have proposed a working model as follows. The gliding machinery is composed of four huge proteins at the base of the membrane protrusion and supported by a cytoskeletal architecture from the cell inside. Many flexible legs approximately 50 nm long are sticking out from the machinery. The movements generated by the ATP hydrolysis cell inside are transmitted to the "leg" protein through a "gear" protein, resulting in repeated binding, pull, and release of the sialylgalactose fixed on the surface by the legs. The gliding of Mycoplasma pneumoniae, a species distantly related to M. mobile, is also discussed.

Isolation and characterization of P1 adhesin, a leg protein of the gliding bacterium Mycoplasma pneumoniae

Mycoplasma pneumoniae, a pathogen causing human pneumonia, binds to solid surfaces at its membrane protrusion and glides by a unique mechanism. In this study, P1 adhesin, which functions as a "leg" in gliding, was isolated from mycoplasma culture and characterized. Using gel filtration, blue-native polyacrylamide gel electrophoresis (BN-PAGE), and chemical cross-linking, the isolated P1 adhesin was shown to form a complex with an accessory protein named P90. The complex included two molecules each of P1 adhesin and P90 (protein B), had a molecular mass of about 480 kDa, and was observed by electron microscopy to form 20-nm-diameter spheres. Partial digestion of isolated P1 adhesin by trypsin showed that the P1 adhesin molecule can be divided into three domains, consistent with the results from trypsin treatment of the cell surface. Sequence analysis of P1 adhesin and its orthologs showed that domain I is well conserved and that a transmembrane segment exists near the link between domains II and III.

Motor-substrate interactions in mycoplasma motility explains non-Arrhenius temperature dependence

Mycoplasmas exhibit a novel, substrate-dependent gliding motility that is driven by approximately 400 "leg" proteins. The legs interact with the substrate and transmit the forces generated by an assembly of ATPase motors. The velocity of the cell increases linearly by nearly 10-fold over a narrow temperature range of 10-40 degrees C. This corresponds to an Arrhenius factor that decreases from approximately 45 k(B)T at 10 degrees C to approximately 10 k(B)T at 40 degrees C. On the other hand, load-velocity curves at different temperatures extrapolate to nearly the same stall force, suggesting a temperature-insensitive force-generation mechanism near stall. In this article, we propose a leg-substrate interaction mechanism that explains the intriguing temperature sensitivity of this motility. The large Arrhenius factor at low temperature comes about from the addition of many smaller energy barriers arising from many substrate-binding sites at the distal end of the leg protein. The Arrhenius dependence attenuates at high temperature due to two factors: 1), the reduced effective multiplicity of energy barriers intrinsic to the multiple-site binding mechanism; and 2), the temperature-sensitive weakly facilitated leg release that curtails the power stroke. The model suggests an explanation for the similar steep, sub-Arrhenius temperature-velocity curves observed in many molecular motors, such as kinesin and myosin, wherein the temperature behavior is dominated not by the catalytic biochemistry, but by the motor-substrate interaction.

Triskelion structure of the Gli521 protein, involved in the gliding mechanism of Mycoplasma mobile

Mycoplasma mobile binds to solid surfaces and glides smoothly and continuously by a unique mechanism. A huge protein, Gli521 (521 kDa), is involved in the gliding machinery, and it is localized in the cell neck, the base of the membrane protrusion. This protein is thought to have the role of force transmission. In this study, the Gli521 protein was purified from M. mobile cells, and its molecular shape was studied. Gel filtration analysis showed that the isolated Gli521 protein forms mainly a monomer in Tween 80-containing buffer and oligomers in Triton X-100-containing buffer. Rotary shadowing electron microscopy showed that the Gli521 monomer consisted of three parts: an oval, a rod, and a hook. The oval was 15 nm long by 11 nm wide, and the filamentous part composed of the rod and the hook was 106 nm long and 3 nm in diameter. The Gli521 molecules form a trimer, producing a "triskelion" reminiscent of eukaryotic clathrin, through association at the hook end. Image averaging of the central part of the triskelion suggested that there are stable and rigid structures. The binding site of a previously isolated monoclonal antibody on Gli521 images showed that the hook end and oval correspond to the C- and N-terminal regions, respectively. Partial digestion of Gli521 showed that the molecule could be divided into three domains, which we assigned to the oval, rod, and hook of the molecular image. The Gli521 molecule's role in the gliding mechanism is discussed.

Cytoskeletal asymmetrical dumbbell structure of a gliding mycoplasma, Mycoplasma gallisepticum, revealed by negative-staining electron microscopy

Several mycoplasma species feature a membrane protrusion at a cell pole, and unknown mechanisms provide gliding motility in the direction of the pole defined by the protrusion. Mycoplasma gallisepticum, an avian pathogen, is known to form a membrane protrusion composed of bleb and infrableb and to glide. Here, we analyzed the gliding motility of M. gallisepticum cells in detail. They glided in the direction of the bleb at an average speed of 0.4 microm/s and remained attached around the bleb to a glass surface, suggesting that the gliding mechanism is similar to that of a related species, Mycoplasma pneumoniae. Next, to elucidate the cytoskeletal structure of M. gallisepticum, we stripped the envelopes by treatment with Triton X-100 under various conditions and observed the remaining structure by negative-staining transmission electron microscopy. A unique cytoskeletal structure, about 300 nm long and 100 nm wide, was found in the bleb and infrableb. The structure, resembling an asymmetrical dumbbell, is composed of five major parts from the distal end: a cap, a small oval, a rod, a large oval, and a bowl. Sonication likely divided the asymmetrical dumbbell into a core and other structures. The cytoskeletal structures of M. gallisepticum were compared with those of M. pneumoniae in detail, and the possible protein components of these structures were considered.

Regions on Gli349 and Gli521 protein molecules directly involved in movements of Mycoplasma mobile gliding machinery, suggested by use of inhibitory antibodies and mutants

Mycoplasma mobile glides on solid surfaces by use of a unique mechanism that involves two large proteins, Gli349 and Gli521. Here we isolated and analyzed two antibodies and three mutants that modified mycoplasma gliding. Mapping of the target points of antibodies and mutations currently available suggested that a 301-amino-acid region on the whole 3,138-amino-acid sequence, a C-terminal region of Gli349, and an N-terminal region of Gli521 are directly involved in the movements of the gliding machinery.

Centipede and inchworm models to explain Mycoplasma gliding

The twelve Mycoplasma species known to glide on solid surfaces all lack surface flagella or pili, and no genes homologous to known motility systems have been found in the five genomes sequenced to date. Recent studies on the fastest of these species, M. mobile, examined novel proteins involved in the gliding mechanism, binding targets on the solid surfaces, energy sources and mechanical characteristics of the movements. Accordingly, I propose a working model for the gliding mechanism, called the centipede (power stroke) model, in which the 'leg' proteins repeat a cycle of binding to and release from the solid surface, using energy from ATP. Another 'inchworm model' suggested from the structural studies of a human pathogen, M. pneumoniae, is also discussed.

Identification of a novel nucleoside triphosphatase from Mycoplasma mobile: a prime candidate motor for gliding motility

A protein with a molecular mass of 42 kDa (P42) from Mycoplasma mobile, one of several mycoplasmas that exhibit gliding motility, was shown to be a novel NTPase (nucleoside triphosphatase). Although the P42 protein lacks a common ATP-binding sequence motif (Walker A), the recombinant proteins expressed in Escherichia coli certainly hydrolysed some nucleoside triphosphates, including ATP. The results of photoaffinity labelling by an ATP analogue supported that the P42 protein contains a specific binding site for ATP (or another nucleoside triphosphate). In the M. mobile genome, the P42 gene is located downstream of gli123, gli349 and gli521 genes, and they have been reported to be polycis-tronically transcribed. As the huge proteins encoded by gli123, gli349 and gli521 play a role in gliding motility of M. mobile, P42 might also have some kind of function in the gliding motility. The gliding motility of M. mobile is driven directly by ATP hydrolysis, but the key ATPase has not been identified. Our results showed that, among these four proteins, only P42 exhibited ATPase activity. Biochemical characteristics--optimal conditions for activity, substrate specificities, and inhibiting effects by ATP analogues--of the recombinant P42 proteins were very similar to those of a putative ATPase speculated from a previous analysis with a gliding 'ghost' whose cell membrane was permeabilized by Triton X-100. These results support the hypothesis that the P42 protein is the key ATPase in the gliding motility of M. mobile.

Cytoskeleton of mollicutes

Mollicutes are a class of bacteria that lack a peptidoglycan layer but have various cell shapes. They perform chromosome segregation and binary fission in a well-organized manner. Especially, species with polarized cell morphology duplicate their membrane protrusion at a position adjacent to the original one and move the new protrusion laterally to the opposite end pole before cell division. The featured various cell shapes of Mollicutes are supported by cytoskeletal structures composed of proteins. Recent progress in the study of cytoskeletons of walled bacteria and genome sequencing has revealed that the cytoskeletons of Mollicutes are not common with those of other bacteria. Mollicutes have special cytoskeletal proteins and structures that are sometimes not shared even by other mollicute species.

Gliding motility of Mycoplasma mobile can occur by repeated binding to N-acetylneuraminyllactose (sialyllactose) fixed on solid surfaces

Mycoplasma mobile relies on an unknown mechanism to glide across solid surfaces including glass, animal cells, and plastics. To identify the direct binding target, we examined the factors that affect the binding of Mycoplasma pneumoniae to solid surfaces and concluded that N-acetylneuraminyllactose (sialyllactose) attached to a protein can mediate glass binding on the basis of the following four lines of evidence: (i) glass binding was inhibited by N-acetylneuraminidase, (ii) glass binding was inhibited by N-acetylneuraminyllactose in a structure-dependent manner, (iii) binding occurred on glass pretreated with bovine serum albumin attached to N-acetylneuraminyllactose, and (iv) gliding speed depended on the density of N-acetylneuraminyllactose on glass.

Morphology of isolated Gli349, a leg protein responsible for Mycoplasma mobile gliding via glass binding, revealed by rotary shadowing electron microscopy

Several species of mycoplasmas rely on an unknown mechanism to glide across solid surfaces in the direction of a membrane protrusion at the cell pole. Our recent studies on the fastest species, Mycoplasma mobile, suggested that a 349-kDa protein, Gli349, localized at the base of the membrane protrusion called the neck, forms legs that stick out from the neck and propel the cell by repeatedly binding to and releasing from a solid surface, based on the energy of ATP hydrolysis. Here, the Gli349 protein was isolated from mycoplasma cells and its structure was analyzed. Gel filtration analysis showed that the isolated Gli349 protein is monomeric. Rotary shadowing electron microscopy revealed that the molecular structure resembles the symbol for an eighth note in music. It contains an oval foot 14 nm long in axis. From this foot extend three rods in tandem of 43, 20, and 20 nm, in that order. The hinge connecting the first and second rods is flexible, while the next hinge has a distinct preference in its angle, near 90 degrees. Molecular images revealed that a monoclonal antibody that can bind to the position at one-third of the total peptide length from the N terminus bound to a position two-thirds from the foot end, suggesting that the foot corresponds to the C-terminal region. The amino acid sequence was assigned to the molecular image, and the topology of the molecule in the gliding machinery is discussed.

Identification of a 123-kilodalton protein (Gli123) involved in machinery for gliding motility of Mycoplasma mobile

Mycoplasma mobile glides on a glass surface in the direction of its tapered end by an unknown mechanism. Two large proteins, Gli349 and Gli521, were recently reported to be involved in glass binding and force generation/transmission, respectively, in M. mobile gliding. These proteins are coded tandemly with two other open reading frames (ORFs) in the order p123-gli349-gli521-p42 on the genome. In the present study, reverse transcriptase PCR analysis suggested that these four ORFs are transcribed cistronically. To characterize the p123 gene coding a 123-kDa protein (Gli123) of 1,128 amino acids, we raised polyclonal antibody against the Gli123 protein. Immunoblotting for Gli123 revealed that Gli123 was missing in a mutant strain, m12, which was previously isolated and characterized by a deficiency in glass binding. Sequencing analysis showed a nonsense mutation at the 523rd amino acid of the protein in the m12 mutant. Immunofluorescence microscopy with the polyclonal antibody showed that Gli123 is localized at the head-like protrusion's base, the cell neck, which is specialized for gliding, as observed for Gli349 and Gli521. Localization of the gliding proteins, Gli349 and Gli521, was disturbed in the m12 mutant, suggesting that Gli123 is essential for the positioning of gliding proteins in the cell neck.

Gliding ghosts of Mycoplasma mobile

Several species of mycoplasmas glide on solid surfaces, in the direction of their membrane protrusion at a cell pole, by an unknown mechanism. Our recent studies on the fastest species, Mycoplasma mobile, suggested that the gliding machinery, localized at the base of the membrane protrusion (the "neck"), is composed of two huge proteins. This machinery forms spikes sticking out from the neck and propels the cell by alternately binding and unbinding the spikes to a solid surface. Here, to study the intracellular mechanisms for gliding, we established a permeabilized gliding ghost model, analogous to the "Triton model" of the eukaryotic axoneme. Treatment with Triton X-100 stopped the gliding and converted the cells to permeabilized "ghosts." When ATP was added exogenously, approximately 85% of the ghosts were reactivated, gliding at speeds similar to those of living cells. The reactivation activity and inhibition by various nucleotides and ATP analogs, as well as their kinetic parameters, showed that the machinery is driven by the hydrolysis of ATP to ADP plus phosphate, caused by an unknown ATPase.