TEM Studies on Antibacterial Mechanisms of Black Phosphorous Nanosheets

2D Materials Kill Bacteria from Within

Early work demonstrated that some two-dimensional (2D) materials could kill bacteria by using their sharp edges to physically rupture the bacteria envelope, which presents distinct advantages over traditional antibiotics, as bacteria are not able to evolve resistance to the former. This mechano-bactericidal mode of action, however, suffers from low antibacterial efficiency, fundamentally because of random orientation of 2D materials outside the bacteria, where the desirable "edge-to-envelope" contacts occur with low probability. Here, we demonstrate a proof-of-concept approach to significantly enhance the potency of the mechano-bactericidal activity of 2D materials. This approach is in marked contrast with previous work, as the 2D materials are designed to be in situ generated inside the bacteria from a molecularly engineered monomer in a self-assembled manner, profoundly promoting the probability of the "edge-to-envelope" contacts. The rationale in this study sheds light on a mechanically new nanostructure-enabled antibacterial strategy to combat antibiotic resistance.

Interaction of 2D nanomaterial with cellular barrier: Membrane attachment and intracellular trafficking

The cell membrane serves as a barrier against the free entry of foreign substances into the cell. Limited by factors such as solubility and targeting, it is difficult for some drugs to pass through the cell membrane barrier and exert the expected therapeutic effect. Two-dimensional nanomaterial (2D NM) has the advantages of high drug loading capacity, flexible modification, and multimodal combination therapy, making them a novel drug delivery vehicle for drug membrane attachment and intracellular transport. By modulating the surface properties of nanocarriers, it is capable of carrying drugs to break through the cell membrane barrier and achieve precise treatment. In this review, we review the classification of various common 2D NMs, the primary parameters affecting their adhesion to cell membranes, and the uptake mechanisms of intracellular transport. Furthermore, we discuss the therapeutic potential of 2D NMs for several major disorders. We anticipate this review will deepen researchers' understanding of the interaction of 2D NM drug carriers with cell membrane barriers, and provide insights for the subsequent development of novel intelligent nanomaterials capable of intracellular transport.

Synthesis, antibacterial and antifungal activity of myricetin derivatives containing piperidine and amide fragments

BACKGROUND

Continuous use of synthetic bactericides and fungicides is causing pathogens to develop resistance, resulting in increased use of pesticides and affecting food security. The green pesticides derived from natural products could reduce or avoid 'pesticide hazards' caused by synthetic pesticides as a result of their unique mechanism of action. Therefore, it is of great significance to create green pesticides with novel structures.

RESULTS

Herein, 30 novel myricetin derivatives containing piperidine and amide fragments were designed and synthesized using active group splicing. Among them, compound Z30 had excellent inhibitory effect against Xanthomonas oryzae pv. Oryzae (Xoo) with the half effective concentration (EC50 ) of 2.7 μg mL-1 . Compound Z26 not only exhibited better antibacterial activity against Xaxonopodis pv. Citri (Xac) with EC50 of 3.9 μg mL-1 , but also displayed higher antifungal activity against Rhizoctonia solani (Rs) with EC50 of 8.3 μg mL-1 . In vivo experiments proved that Z30 against bacterial blight of rice and Z26 against rice blast exhibits significant protective and curative effect. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) showed that Z26 and Z30 could change the integrity of cell wall and membrane of pathogen Xoo, Xac and Rs, resulting in cytoplasmic leakage and eventually death. Enzymatic assay, molecular docking and molecular dynamics simulations (MDs) indicated that Z26 could be used as a potential succinate dehydrogenase inhibitor (SDHI).

CONCLUSION

Z26 and Z30 significantly reduced the pathogenicity of the pathogens, which provided a new idea and direction for the development of green pesticides. © 2023 Society of Chemical Industry.

Black Phosphorus - A Rising Star in the Antibacterial Materials

Antibiotics are the most commonly used means to treat bacterial infection at present, but the unreasonable use of antibiotics induces the generation of drug-resistant bacteria, which causes great problems for their clinical application. In recent years, researchers have found that nanomaterials with high specific surface area, special structure, photocatalytic activity and other properties show great potential in bacterial infection control. Among them, black phosphorus (BP), a two-dimensional (2D) nanomaterial, has been widely reported in the treatment of tumor and bone defect due to its excellent biocompatibility and degradability. However, the current theory about the antibacterial properties of BP is still insufficient, and the relevant mechanism of action needs to be further studied. In this paper, we introduced the structure and properties of BP, elaborated the mechanism of BP in bacterial infection, and systematically reviewed the application of BP composite materials in the field of antibacterial. At the same time, we also discussed the challenges faced by the current research and application of BP, which laid a solid theoretical foundation for the further study of BP in the future.

Multifunctional Carbon Nanodots for Antibacterial Enhancement, pH Change, and Poisonous Tin(IV) Specifical Detection

In recent years, antibiotic-based carbon nanodots have been extensively developed and studied, because of their excellent synergistic fluorescence and antibacterial properties. These antibacterial carbon nanodots have also been developed with various new applications, such as heavy iron detection, pH sensitivity, temperature response, and bacterial count detection in various environments. In this article, using vancomycin hydrochloride as the only precursor, vancomycin hydrochloride carbon nanodots were rapidly synthesized by a one-step microwave method. The diameter of the vancomycin hydrochloride carbon nanodots was concentrated at 0.899 ± 0.40 nm with a uniform size and excitation-dependent fluorescence. Vancomycin hydrochloride carbon nanodots showed better antibacterial activity than the original vancomycin hydrochloride with low biological toxicity and good stability. In the pH range of approximately 7-13, there was a good linear relationship between the fluorescence intensity of the carbon nanodots and the pH value (R2 = 0.98516). Moreover, vancomycin hydrochloride carbon nanodots could quickly and specifically detect poisonous Sn4+ through changes in their fluorescence intensity, with a detection limit of approximately 5.2 μM. Multifunctional vancomycin hydrochloride carbon nanodots have good application prospects in the fields of antibacterial, toxic Sn4+ detection, and pH-sensitive aspects.

Near-infrared active ferrocenyl porous organic polymer with photothermal enhanced enzymatic activity for combination antibacterial application

As a severe ongoing global problem, bacterial contamination exists in every aspect of human life and the search for new antibacterial agents is urgently needed. Herein, a ferrocenyl porous organic polymer (FMC-POP) broad-spectrum antibacterial agent based on synergistic photothermal and peroxidase-like activity was prepared in a facile manner via the copolymerization of ferrocene diformaldehyde and cinnamaldehyde with mannitol through the acid-responsive acetal bond. The photoactive FMC-POP, with high photothermal conversion efficiency (41.45%), could convert not only the near-infrared laser irradiation into local heat to eradicate bacteria, but also low-concentration H2O2 into radical oxygen species (˙OH) that are effective against bacteria. Compared with single-mode photothermal (PTT) and enzymatic therapies, this combination therapy could significantly improve the bactericidal effect, exhibiting a germicidal efficiency of up to 99% (vs. 80.42% for PTT and 70% for enzyme). Thus, our work paves the way for a synergistic non-invasive antimicrobial therapy, which could expand the applications of POP-based artificial enzymes in biomedicine.

Graphene Quantum Dots Nonmonotonically Influence the Horizontal Transfer of Extracellular Antibiotic Resistance Genes via Bacterial Transformation

Graphene quantum dots (GQDs) coexist with antibiotic resistance genes (ARGs) in the environment. Whether GQDs influence ARG spread needs investigation, since the resulting development of multidrug-resistant pathogens would threaten human health. This study investigates the effect of GQDs on the horizontal transfer of extracellular ARGs (i.e., transformation, a pivotal way that ARGs spread) mediated by plasmids into competent Escherichia coli cells. GQDs enhance ARG transfer at lower concentrations, which are close to their environmental residual concentrations. However, with further increases in concentration (closer to working concentrations needed for wastewater remediation), the effects of enhancement weaken or even become inhibitory. At lower concentrations, GQDs promote the gene expression related to pore-forming outer membrane proteins and the generation of intracellular reactive oxygen species, thus inducing pore formation and enhancing membrane permeability. GQDs may also act as carriers to transport ARGs into cells. These factors result in enhanced ARG transfer. At higher concentrations, GQD aggregation occurs, and aggregates attach to the cell surface, reducing the effective contact area of recipients for external plasmids. GQDs also form large agglomerates with plasmids and thus hindering ARG entrance. This study could promote the understanding of the GQD-caused ecological risks and benefit their safe application.

Black phosphorus quantum dots induce autophagy and apoptosis of human bronchial epithelial cells via endoplasmic reticulum stress

PURPOSE

The board application of black phosphorus quantum dots (BP-QDs) increases the risk of inhalation exposure in the manufacturing process. The aim of this study is to explore the toxic effect of BP-QDs on human bronchial epithelial cells (Beas-2B) and lung tissue of Balb/c mice.

METHODS

The BP-QDs were characterized using transmission electron microscopy (TEM) and a Malvern laser particle size analyzer. Cell Counting Kit-8 (CCK-8) and TEM were used to detect cytotoxicity and organelle injury. Damage to the endoplasmic reticulum (ER) was detected by using the ER-Tracker molecular probe. Rates of apoptosis were detected by AnnexinV/PI staining. Phagocytic acid vesicles were detected using AO staining. Western blotting and immunohistochemistry were used to examine the molecular mechanisms.

RESULTS

After treatment with different concentrations of BP-QDs for 24 h, the cell viability decreased, as well as activation of the ER stress and autophagy. Furthermore, the rate of apoptosis was increased. Inhibition of ER stress caused by 4-phenyl butyric acid (4-PBA) was shown to significantly inhibit both apoptosis and autophagy, suggesting that ER stress could be an upstream mediator of both autophagy and apoptosis. BP-QD-induced autophagy can also inhibit the occurrence of apoptosis using molecules related to autophagy including rapamycin (Rapa), 3-methyladenine (3-MA), and bafilomycin A1 (Bafi A1). In general, BP-QDs activate ER stress in Beas-2B cells, which further induces autophagy and apoptosis, and autophagy may be activated as a factor that protects against apoptosis. We also observed strong staining of related proteins of ER stress, autophagy, and apoptosis proteins in mouse lung tissue following intracheal instillation over the course of a week.

CONCLUSION

BP-QD-induced ER stress facilitates autophagy and apoptosis in Beas-2B cells and autophagy may be activated as a protective factor against apoptosis. Under conditions of ER stress induced by BP-QDs, The interplay between autophagy and apoptosis determines cell fate.

A novel strategy to enhance photocatalytic killing of foodborne pathogenic bacteria by modification of non-metallic monomeric black phosphorus with Elaeagnus mollis polysaccharides

New antibacterial agents are needed to overcome the challenges of microbial food contamination. In this study, we investigated the potential of Elaeagnus mollis polysaccharide (EMP) to modify black phosphorus (BP) for use as a bactericide for foodborne pathogenic bacteria. The resulting compound (EMP-BP) displayed enhanced stability and activity compared with BP. EMP-BP exhibited an increased antibacterial activity (bactericidal efficiency of 99.999 % after 60 min of light exposure) compared to EMP and BP. Further studies revealed that photocatalytically generated reactive oxygen species (ROS) and active polysaccharides acted collectively on the cell membrane, leading to cell deformation and death. Furthermore, EMP-BP inhibited biofilm formation and reduced expression of virulence factors of Staphylococcus aureus, and material hemolysis and cytotoxicity tests prove that the material had good biocompatibility. In addition, bacteria treated with EMP-BP remained highly sensitive to antibiotics and did not develop significant resistance. In summary, we report an environmentally friendly method for controlling pathogenic foodborne bacteria that is efficient and apparently safe.

Hybrid materials based on chitosan functionalized with green synthesized copper nanoparticles: Physico-chemical and antimicrobial analysis

Recently, the development of materials with antimicrobial properties has become a challenge under scrutiny. The incorporation of copper nanoparticles (NpCu) into a chitosan matrix appears to represent a viable strategy to contain the particles and prevent their oxidation. Regarding the physical properties, the nanocomposite films (CHCu) showed a decrease in the elongation at break (5 %) and an increase in the tensile strength of 10 % concerning chitosan films (control). They also showed solubility values lower than 5 % while the swelling diminished by 50 %, on average. The dynamical mechanical analysis (DMA) of nanocomposites revealed two thermal events located at 113° and 178 °C, which matched the glass transitions of the CH-enriched phase and nanoparticles-enriched phase, respectively. In addition, the thermogravimetric analysis (TGA) detected a greater stability of the nanocomposites. Chitosan films and the NpCu-loaded nanocomposites demonstrated excellent antibacterial capacity against Gram-negative and Gram-positive bacteria, proved through diffusion disc, zeta potential, and ATR-FTIR techniques. Additionally, the penetration of individual NpCu particles into bacterial cells and the leakage of cell content were verified by TEM. The mechanism of the antibacterial activity of the nanocomposites involved the interaction of chitosan with the bacterial outer membrane or cell wall and the diffusion of the NpCu through the cells. These materials could be applied in diverse fields of biology, medicine, or food packaging.

In Situ Microscopic Studies on the Interaction of Multi-Principal Element Nanoparticles and Bacteria

Multi-principal element nanoparticles are an emerging class of materials with potential applications in medicine and biology. However, it is not known how such nanoparticles interact with bacteria at nanoscale. In the present work, we evaluated the interaction of multi-principal elemental alloy (FeNiCu) nanoparticles with Escherichia coli (E. coli) bacteria using the in situ graphene liquid cell (GLC) scanning transmission electron microscopy (STEM) approach. The imaging revealed the details of bacteria wall damage in the vicinity of nanoparticles. The chemical mappings of S, P, O, N, C, and Cl elements confirmed the cytoplasmic leakage of the bacteria. Our results show that there is selective release of metal ions from the nanoparticles. The release of copper ions was much higher than that for nickel while the iron release was the lowest. In addition, the binding affinity of bacterial cell membrane protein functional groups with Cu, Ni, and Fe cations is found to be the driving force behind the selective metal cations' release from the multi-principal element nanoparticles. The protein functional groups driven dissolution of multielement nanoparticles was evaluated using the density functional theory (DFT) computational method, which confirmed that the energy required to remove Cu atoms from the nanoparticle surface was the least in comparison with those for Ni and Fe atoms. The DFT results support the experimental data, indicating that the energy to dissolve metal atoms exposed to oxidation and/or the to presence of oxygen atoms at the surface of the nanoparticle catalyzes metal removal from the multielement nanoparticle. The study shows the potential of compositional design of multi-principal element nanoparticles for the controlled release of metal ions to develop antibacterial strategies. In addition, GLC-STEM is a promising approach for understanding the nanoscale interaction of metallic nanoparticles with biological structures.

Enhanced Bacterial Growth by Polyelemental Glycerolate Particles

While polyelemental alloys are shown to be promising for healthcare applications, their effectiveness in promoting bacterial growth remains unexplored. In the present work, we evaluated the interaction of polyelemental glycerolate particles (PGPs) with Escherichia coli (E. coli) bacteria. PGPs were synthesized using the solvothermal route, and nanoscale random distribution of metal cations in the glycerol matrix of PGPs was confirmed. We observed 7-fold growth of E. coli bacteria upon 4 h of interaction with quinary glycerolate (NiZnMnMgSr-Gly) particles in comparison to control E. coli bacteria. Nanoscale microscopic studies on bacteria interactions with PGPs showed the release of metal cations in the bacterium cytoplasm from PGPs. The electron microscopy imaging and chemical mapping indicated bacterial biofilm formation on PGPs without causing significant cell membrane damage. The data showed that the presence of glycerol in PGPs is effective in controlling the release of metal cations, thus preventing bacterial toxicity. The presence of multiple metal cations is expected to provide synergistic effects of nutrients needed for bacterial growth. The present work provides key microscopic insights of mechanisms by which PGPs enhance biofilm growth. This study opens the door for future applications of PGPs in areas where bacterial growth is essential including healthcare, clean energy, and the food industry.

Layered Double Hydroxide-Based Micro "Chemical Factory" with Arsenic Processing and Screening Functions on Nitinol for Gallbladder Cancer Treatment

Gallbladder cancer is a common malignant tumor of the biliary system with a high fatality rate. Nitinol (Ni-Ti) stents, a standard treatment for prolonging patients' lives, are susceptible to reocclusion and cannot inhibit tumor recurrence because they lack antitumor and antibacterial activity. Herein, an arsenic-loaded layered double-hydroxide film is constructed on Ni-Ti, forming a micro "chemical factory." The LDH plays the role of a "processer" which absorbs highly toxic trivalent arsenic (As(III)) and processes it into lowly toxic pentavalent arsenic (As(V)). It also acts as a "quality-inspector," confining As(III) in the interlayer and releasing only As(V) (the finished product) to the outside. This control mechanism minimizes the toxicity during contact with normal tissue. The acidic microenvironment and overexpression of glutathione in tumor tissues not only accelerates the release of arsenic from the platform but also triggers the in situ transformation of arsenic from lowly toxic As(V) to highly toxic As(III), exerting a strong arsenic-mediated antineoplastic effect. Such a microenvironment-responsive "chemical factory" with arsenic processing and screening functions is expected to prevent tumor overgrowth, metastasis, and bacterial infection and provide new insights into the design of Ni-Ti drug-eluting stents for gallbladder cancer treatment.

Preparation of NIR-responsive, ROS-generating and antibacterial black phosphorus quantum dots for promoting the MRSA-infected wound healing in diabetic rats

Multidrug-resistant (MDR) bacteria-induced infection is becoming a huge challenge for clinical treatment, especially for non-healing diabetic wound infections, which increase patient mortality. MRSA infections and delayed wound healing (methicillin-resistant Staphylococcus aureus) accounted for a higher proportion. Although surgical debridement and continuous use of antibiotics are still the main clinical treatments, new multifunctional therapeutic nanoplatform are attractive for MIDW. Thus, in the present study, black phosphorus quantum dots (BPQDs) encapsulated in hydrogel (BPQDs@NH) were utilized as nanoplatforms for MIDW treatment to achieve the multifunctional properties of NIR (near infrared) responsiveness, ROS (reactive oxygen species) generation and antibacterial activity. Upon NIR irradiation, the temperature of the BPQDs@NH-treated MIDW area rapidly increased up to 55 °C for sterilization. In vitro experiments showed that BPQDs@NH exerted a synergistic effect on inhibiting MRSA by producing of ROS, lipid peroxidation, glutathione, adenosine triphosphate accumulation and bacterial membrane destruction upon NIR irradiation. The resulting BPQDs@NH achieved an effective sterilization rate of approximately 90% for MRSA. Furthermore, animal experiments revealed that BPQDs@NH achieved an effective closure rate of 95% for MIDW after 12 days by reducing the inflammatory response and regulating the expression of vascular endothelial growth factor (VEGF) and basic fibroblast growth factor (bFGF). Meanwhile, intravenous circulation experiments showed good biocompatibility of BPQDs, and no obvious damage to rat major organs was observed. The obtained results indicated that BPQDs@NH achieved the synergistic functions of NIR-responsiveness, ROS generation, and antibacterial activity and promoted wound healing, suggesting that they are promising multifunctional nanoplatforms for MIDW healing. STATEMENT OF SIGNIFICANCE: 1. NIR-triggered ROS-generating and antibacterial nanoplatforms are attractive in the wound healing field. 2. In this work, black phosphorus quantum dots encapsulated in a hydrogel were used as a nanoplatform for treating MRSA infected wounds. 3. The obtained materials have achieved an effective sterilization rate for MRSA and effective wound closure rate.

A novel inactivated whole-cell Pseudomonas aeruginosa vaccine that acts through the cGAS-STING pathway

Pseudomonas aeruginosa infection continues to be a major threat to global public health, and new safe and efficacious vaccines are needed for prevention of infections caused by P. aeruginosa. X-ray irradiation has been used to prepare whole-cell inactivated vaccines against P. aeruginosa infection. However, the immunological mechanisms of X-ray-inactivated vaccines are still unclear and require further investigation. Our previous study found that an X-ray-inactivated whole-cell vaccine could provide protection against P. aeruginosa by boosting T cells. The aim of the present study was to further explore the immunological mechanisms of the vaccine. Herein, P. aeruginosa PAO1, a widely used laboratory strain, was utilized to prepare the vaccine, and we found nucleic acids and 8-hydroxyguanosine in the supernatant of X-ray-inactivated PAO1 (XPa). By detecting CD86, CD80, and MHCII expression, we found that XPa fostered dentritic cell (DC) maturation by detecting. XPa stimulated the cGAS-STING pathway as well as Toll-like receptors in DCs in vitro, and DC finally underwent apoptosis and pyroptosis after XPa stimulation. In addition, DC stimulated by XPa induced CD8⁺ T-cell proliferation in vitro and generated immunologic memory in vivo. Moreover, XPa vaccination induced both Th1 and Th2 cytokine responses in mice and reduced the level of inflammatory factors during infection. XPa protected mice in pneumonia models from infection with PAO1 or multidrug-resistant clinical isolate W9. Chronic obstructive pulmonary disease (COPD) mice immunized with XPa could resist PAO1 infection. Therefore, a new mechanism of an X-ray-inactivated whole-cell vaccine against P. aeruginosa infection was discovered in this study.

Black Phosphorus as Multifaceted Advanced Material Nanoplatforms for Potential Biomedical Applications

Black phosphorus is one of the emerging members of two-dimensional (2D) materials which has recently entered the biomedical field. Its anisotropic properties and infrared bandgap have enabled researchers to discover its applicability in several fields including optoelectronics, 3D printing, bioimaging, and others. Characterization techniques such as Raman spectroscopy have revealed the structural information of Black phosphorus (BP) along with its fundamental properties, such as the behavior of its photons and electrons. The present review provides an overview of synthetic approaches and properties of BP, in addition to a detailed discussion about various types of surface modifications available for overcoming the stability-related drawbacks and for imparting targeting ability to synthesized nanoplatforms. The review further gives an overview of multiple characterization techniques such as spectroscopic, thermal, optical, and electron microscopic techniques for providing an insight into its fundamental properties. These characterization techniques are not only important for the analysis of the synthesized BP but also play a vital role in assessing the doping as well as the structural integrity of BP-based nanocomposites. The potential role of BP and BP-based nanocomposites for biomedical applications specifically, in the fields of drug delivery, 3D printing, and wound dressing, have been discussed in detail to provide an insight into the multifunctional role of BP-based nanoplatforms for the management of various diseases, including cancer therapy. The review further sheds light on the role of BP-based 2D platforms such as BP nanosheets along with BP-based 0D platforms-i.e., BP quantum dots in the field of therapy and bioimaging of cancer using techniques such as photoacoustic imaging and fluorescence imaging. Although the review inculcates the multimodal therapeutic as well as imaging role of BP, there is still research going on in this field which will help in the development of BP-based theranostic platforms not only for cancer therapy, but various other diseases.