Development and in vitro Evaluation of Gastro-protective Aceclofenac-loaded Self-emulsifying Drug Delivery System

Testing of acute and sub-acute toxicity profile of novel naproxen sodium nanoformulation in male and female mice

Nanodrugs offer promising alternatives to conventionally used over the counter drugs. Compared to its free form, therapeutic benefits, and gastric tissue safety of naproxen sodium nanoformulation (NpNF) were recently demonstrated. Essential regulatory safety data for this formulation are, however, not available. To address this, male and female BALB/c mice were subjected to acute and 14-day repeated-oral dose assessments. Our data indicate that NpNF was well tolerated up to 2000 mg/kg b.w. A 14-day subacute toxicity testing revealed that the oral administration of low dose (30 mg/kg) NpNF did not produce any adverse effects on blood profile and serum biochemical parameters. Levels of oxidative stress markers and antioxidant enzymes neared normal. Histology of selected tissues also showed no evidence of toxicity. In contrast, a ten-fold increase in NpNF dosage (300 mg/kg), demonstrated, irrespective of gender, mild to moderate toxicity (p < 0.05) in the brain, stomach, and heart tissues, while ROS, LPO, CAT, SOD, POD, and GSH levels remained unaffected in the liver, kidney, spleen, testis, and seminal vesicles. No effect on serum biochemical parameters, overall indicated a no-observed-adverse-effect level (NOAEL) is 300 mg/kg. Further increase in dosage (1000 mg/kg) significantly altered all parameters demonstrating that high dose is toxic.

Preparation and Evaluation of a Self-Emulsifying Drug Delivery System for Improving the Solubility and Permeability of Ticagrelor

Ticagrelor (TCG) is a BCS class IV antiplatelet drug used to prevent platelet aggregation in patients with acute coronary syndrome, having poor solubility and permeability. The goal of this study was to develop a self-nanoemulsifying drug delivery system (SNEDDS) of TCG to improve its solubility and permeability. The excipients were selected based on the maximum solubility of TCG and observed by UV spectrophotometer. Different combinations of oil, surfactant, and co-surfactant (1:1, 2:1, and 3:1) were used to prepare TCG-SNEDDS formulations, and pseudo-ternary phase diagrams were plotted. The nanoemulsion region was observed. Clove oil (10-20%), Tween-80 (45-70%), and PEG-400 (20-45%) were used as an oil, surfactant, and co-surfactant, respectively. The selected formulations (F1, F2, F3, F4, F5, and F6) were analyzed for ζ potential, polydispersity index (PDI), ζ size, self-emulsification test, cloud point determination, thermodynamic studies, entrapment efficiency, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), in vitro dissolution, ex vivo permeation, and pharmacodynamic study. The TCG-SNEDDS formulations exhibited ζ potential from -9.92 to -6.23 mV, a ζ average of 11.85-260.4 nm, and good PDI. The in vitro drug release in phosphate buffer pH 6.8 from selected TCG-SNEDDS F4 was about 98.45%, and F6 was about 97.86%, displaying improved dissolution of TCG in 0.1 N HCl and phosphate buffer pH 6.8, in comparison to 28.05% of pure TCG suspension after 12 h. While the in vitro drug release in 0.1 N HCl from F4 was about 62.03%, F6 was about 73.57%, which is higher than 10.35% of the pure TCG suspension. In ex vivo permeability studies, F4 also exhibited an improved apparent permeability of 2.7 × 10-6versus 0.6708 × 10-6 cm2/s of pure drug suspension. The pharmacodynamic study in rabbits demonstrated enhanced antiplatelet activity from TCG-SNEDDS F4 compared to that from pure TCG suspension. These outcomes imply that the TCG-SNEDDS may serve as an effective means of enhancing TCG's antiplatelet activity by improving the solubility and permeability of TCG.

Quality-by-Design-Assisted Optimization of Carvacrol Oil-Loaded Niosomal Gel for Anti-Inflammatory Efficacy by Topical Route

Niosomes are multilamellar vesicles that effectively transfer active ingredients into the skin's layers. To improve the active substance's penetration across the skin, these carriers are frequently utilized as topical drug delivery systems. Essential oils (EOs) have garnered significant interest in the field of research and development owing to their various pharmacological activities, cost-effectiveness, and simple manufacturing techniques. However, these ingredients undergo degradation and oxidation over time, leading to a loss of functionality. Niosome formulations have been developed to deal with these challenges. The main goal of this work was to create a niosomal gel of carvacrol oil (CVC) to improve its penetration into the skin for anti-inflammatory actions and stability. By changing the ratio of drug, cholesterol and surfactant, various formulations of CVC niosomes were formulated using Box Behnken Design (BBD). A thin-film hydration technique using a rotary evaporator was employed for the development of niosomes. Following optimization, the CVC-loaded niosomes had shown: 180.23 nm, 0.265, -31.70 mV, and 90.61% of vesicle size, PDI, zeta potential, and EE%. An in vitro study on drug release discovered the rates of drug release for CVC-Ns and CVC suspension, which were found to be 70.24 ± 1.21 and 32.87 ± 1.03, respectively. The release of CVC from niosomes best fit the Higuchi model, and the Korsmeyer-Peppas model suggests that the release of the drug followed the non-Fickian diffusion. In a dermatokinetic investigation, niosome gel significantly increased CVC transport in the skin layers when compared to CVC-conventional formulation gel (CVC-CFG). Confocal laser scanning microscopy (CLSM) of rat skin exposed to the rhodamine B-loaded niosome formulation showed a deeper penetration of 25.0 µm compared to the hydroalcoholic rhodamine B solution (5.0 µm). Additionally, the CVC-N gel antioxidant activity was higher than that of free CVC. The formulation coded F4 was selected as the optimized formulation and then gelled with carbopol to improve its topical application. Niosomal gel underwent tests for pH determination, spreadability, texture analysis, and CLSM. Our findings imply that the niosomal gel formulations could represent a potential strategy for the topical delivery of CVC in the treatment of inflammatory disease.

Phospholipid-Based Topical Nano-Hydrogel of Mangiferin: Enhanced Topical Delivery and Improved Dermatokinetics

Mangiferin is a herbal drug that has proven anticancer potential. Owing to its lower aqueous solubility and poor oral bioavailability, the full pharmacological potential of this bioactive drug has not fully been explored. In the present study, phospholipid-based microemulsion systems were developed to bypass oral delivery. The globule size of the developed nanocarriers was less than 150 nm and the drug entrapment was >75% with a drug loading ~25%. The developed system offered a controlled release pattern following the Fickian drug release. This enhanced mangiferin's in vitro anticancer activity by four-fold, the cellular uptake was observed to be improved by three-fold on the MCF-7 cells. Ex vivo dermatokinetic studies showed substantial topical bioavailability with a prolonged residence time. The findings provide a simple technique to administer mangiferin via a topical route promising a safer, topically bioavailable and effective treatment option for breast cancer. Such scalable carriers with immense topical delivery potential may provide a better option for present-day topical products of a conventional nature.

Self-Emulsifying Phospholipid Preconcentrates for the Enhanced Photoprotection of Luteolin

Exposure to ultraviolet B (UVB) leads to the overproduction of reactive oxygen species (ROS), causing higher risks of skin disorders. Luteolin (Lut) is a naturally occurring antioxidant that can absorb a broad range of ultraviolet light, but its water solubility and skin permeability are limited and insufficient. The aim of the current study was to develop a Lut-loaded self-emulsifying phospholipid preconcentrate (LSEPP) for enhancing the solubility, permeability, and photoprotective activity of Lut. The designed formulations were firstly examined for their droplet size, zeta potential, dispersity, and in vitro corneum permeability after dispensing the preconcentrate to form an emulsion; the optimized formulation was further characterized for its emulsified morphology, compatibility with excipients, stability in the preconcentrate form, and photoprotective activity by the HaCaT cell model under the emulsified status. The optimized LSEPP formulation attained a smaller droplet size (140.6 ± 24.2 nm) with the addition of 1,8-cineole and increased the permeability of Lut by 7-fold. As evidenced in the cell model studies, the optimized LSEPP formulation can efficiently deliver Lut into HaCaT cells after emulsification and result in a 115% better cell viability as well as a 203% stronger ROS scavenging capability, compared with those of unformulated Lut after UVB irradiation. To sum up, we have successfully developed an LSEPP formulation, which is a safe and promising topical delivery system for enhancing the photoprotective effects of Lut.

Lipid-based solubilization technology via hot melt extrusion: promises and challenges

INTRODUCTION

Self-emulsifying drug delivery systems (SEDDS) are a promising strategy to improve the oral bioavailability of poorly water-soluble drugs (PWSD). The excipients of SEDDS enable permeation through the mucus and gastro-intestinal barrier, inhibiting efflux transporters (e.g. P-glycoprotein) of drugs. Poor drug loading capacity and formulation instability are the main setbacks of traditional SEDDS. The use of polymeric precipitation inhibitors was shown to create supersaturable SEDDS with increased drug payload, and their solidification can help to overcome the instability challenge. As an alternative to several existing SEDDS solidification technologies, hot melt extrusion (HME) holds the potential for lean and continuous manufacturing of supersaturable solid-SEDDS. Despite being ubiquitously applied in solid lipid and polymeric processing, HME has not yet been widely considered for the preparation of SEDDS.

AREAS COVERED

The review begins with the rationale why SEDDS as the preferred lipid-based delivery systems (LBDS) is suitable for the oral delivery of PWSD and discusses the common barriers to oral administration. The potential of LBDS to surmount them is discussed. SEDDS as the flagship of LBDS for PWSD is proposed with a special emphasis on solid-SEDDS. Finally, the opportunities and challenges of HME from the lipid-based excipient (LBE) processing and product performance standpoint are highlighted.

EXPERT OPINION

HME can be a continuous, solvent-free, cost-effective, and scalable technology for manufacturing solid supersaturable SEDDS. Several critical formulations and process parameters in successfully preparing SEDDS via HME are identified.

Naproxen sodium nanoparticles are less toxic and gastroprotective agents than the conventional NSAID drug naproxen sodium in Balb/c mice

Use of non-steroidal anti-inflammatory drugs (NSAIDs) is one of the leading causes of gastric ulcers. Excellent therapeutic properties have made the use of NSAIDs widespread. Nano-drug delivery to reduce systemic toxicity through modulating drug pharmacokinetics may be a better choice. Presently, we investigated if naproxen nanoformulation (PVA capped NPRS-MgO NPs) is less toxic to be used as an alternative drug. Groups of mice were assigned to control, NPRS-treated, CNF-treated, UNF-treated, and MgO NPs-treated groups. Analyses included gross examination of gastric mucosa, calculation of ulcer and inhibition indices, determination of tissue levels of reactive oxygen species (ROS), malondialdehyde (MDA), catalase (CAT), peroxidase (POD), superoxide dismutase (SOD), and reduced glutathione (GSH), histological and immunohistochemical assessment of i-NOS, COX-2, and caspase-3 of stomach mucosa, q-PCR for the detection of mRNA expression of IL-1β, IL-6, and TNF-α. Results were compared statistically at P < 0.05. Compared to NPRS-treated mice which developed multiple ulcers, had elevated MDA and ROS levels, and deceased CAT, POD, SOD, and GSH levels, significantly increased expression of IL-1β, IL-6, and TNF-α mRNA, damaged surface epithelium with disrupted glandular architecture and leucocyte infiltration of lamina propria with a marked increase in mucosal COX-2, i-NOS, and caspase-3 expression, oral administration of coated and uncoated naproxen nanoformulations prevented the gross mucosal damage by a restoration of all biochemical, histological, and immunohistochemical alterations to near control levels. The present study demonstrates that naproxen sodium nanoformulation has a gastroprotective action and in the clinical setting can be a better alternative to conventional naproxen.

Preparation of 2-Methoxyestradiol Self-emulsified Drug Delivery System and the Effect on Combination Therapy with Doxorubicin Against MCF-7/ADM Cells

Due to the poor solubility and bioavailability of 2-methoxyestradiol (2-ME), 2-ME emulsified drug delivery system (2-ME-SEDDS) was designed and characterized. After dilution with 5% glucose, 2-ME-SEDDS formed fine emulsions with mean diameter of 171 ± 14 nm and zeta potential of - 7.4 ± 0.6 mV. The cytotoxicity of 2-ME-SEDDS against MCF-7 and MCF-7/ADM cells was considerable to that of free 2-ME, and the half maximal inhibitory concentration ran up to 195 µg/mL on MCF-7/ADM cells. In order to gain a satisfactory inhibition effect on MCF-7/ADM cells, 2-ME-SEDDS combined with doxorubicin was used. It is worth noting that the combination of 2-ME-SEDDS and doxorubicin displayed a superior synergistic effect with a combined index of 0.62. And the cellular uptake of doxorubicin by MCF-7/ADM cells in the combination group was significantly higher than that of doxorubicin treatment group. The study preliminarily suggested that 2-ME-SEDDS could increase the cellular uptake of doxorubicin by MCF-7/ADM cells and the synergistic effect may be attributed to the increased cellular uptake of doxorubicin under the influence of 2-ME-SEDDS. In conclusion, SEDDS was an alternative and promising formulation for 2-ME. The combination therapy with synergistic effect by the combination of 2-ME-SEDDS and doxorubicin seems to be a promising strategy to potentiate anti-tumor efficiency against MCF-7/ADM, even other multidrug resistance tumors.

Solidification of Self-Emulsifying Drug Delivery Systems as a Novel Approach to the Management of Uncomplicated Malaria

Malaria affects millions of people annually, especially in third-world countries. The mainstay of treatment is oral anti-malarial drugs and vaccination. An increase in resistant strains of malaria parasites to most of the current anti-malarial drugs adds to the global burden. Moreover, existing and new anti-malarial drugs are hampered by significantly poor aqueous solubility and low permeability, resulting in low oral bioavailability and patient noncompliance. Lipid formulations are commonly used to increase solubility and efficacy and decrease toxicity. The present review discusses the findings from studies focusing on specialised oral lipophilic drug delivery systems, including self-emulsifying drug delivery systems (SEDDSs). SEDDSs facilitate the spontaneous formation of liquid emulsions that effectively solubilise the incorporated drugs into the gastrointestinal tract and thereby improve the absorption of poorly-soluble anti-malaria drugs. However, traditional SEDDSs are normally in liquid dosage forms, which are delivered orally to the site of absorption, and are hampered by poor stability. This paper discusses novel solidification techniques that can easily and economically be up-scaled due to already existing industrial equipment that could be utilised. This method could, furthermore, improve product stability and patient compliance. The possible impact that solid oral SEDDSs can play in the fight against malaria is highlighted.

Effect Of Surfactant Chain Length On Emulsification Dynamics Of Self Emulsifying Formulation Of Poorly Soluble Drug

AIM

In this work the aim was to study the chain length of surfactant on the self emulsifying system of a poorly soluble drug, aceclofenac. The selection of almond oil as a lipid vehicle was done on basis of solubility and compatibility of the vehicle with the drug.

METHODS

The effect of varying chain length of different surfactants of Tween series namely Tween 20, Tween 40, Tween 60 and Tween 80 was evaluated on self emulsifying efficiency by constructing pseudoternary diagrams. PEG-400 was used as co-surfactant in a definite ratio with all the surfactants to minimize their concentration. The best self emulsifying ability was exhibited by Tween 80: PEG-400 combination followed by Tween 60: PEG-400, Tween 40: PEG-400, Tween 20: PEG-400. This observation indicates that as the chain length of Tweens increases their ability to form a good microemulsion increases if same co-surfactant is used.

RESULTS

However it has also been found that the presence of unsaturated bond in Tween 80 provides it an elasticity which supports good intermixing of oil and water and leading to formation of a fine microemulsion. Six different formulations were prepared using combination of almond oil, Tween 80, PEG-400 and the drug aceclofenac.

CONCLUSION

The formulations were subjected to various evaluation parameters such as dispersibility, transmittance, pH, globule size, polydispersibility, zeta potential, viscosity, refractive index and in vitro dissolution. The best formulation was found to have globule size of less than 100 nm, zeta potential of -3.35 ± 0.60 mV which indicates formation of a microemulsion of aceclofenac with good stability.

Optimized semisolid self-nanoemulsifying system based on glyceryl behenate: A potential nanoplatform for enhancing antitumor activity of raloxifene hydrochloride in MCF-7 human breast cancer cells

Raloxifene hydrochloride (RLX) is a selective estrogen receptor modulator used for treatment and protection against postmenopausal osteoporosis. The drug has been used for protection against breast cancer and more recently, for management of the disease by virtue of its estrogen antagonist action. However, the drug has reduced bioavailability related to low water solubility and first pass metabolism. To surmount these pitfalls, this study aimed at developing and optimizing RLX-loaded semisolid self-nanoemulsifying system (SSNES) with minimized globule size to improve the drug solubility, tumor penetration, and consequently antitumor activity. A simplex lattice mixture design was employed for the formulation and optimization of SSNESs. The mixture components, namely, Compritol® 888 ATO, Tween 20, and polyethylene glycol 200 exhibited significant effect on globule size at P < 0.05. The optimized formulation with globule size of 109.19 ± 2.11 nm showed acceptable thermodynamic stability under stress conditions. Anti-cancer efficacy of the obtained formulation was evaluated in MCF-7 breast cancer cell line. MTT viability assay revealed that RLX-loaded SSNES notably inhibited MCF-7 cell proliferation. Flow cytometry and dual staining with annexin V-FITC/PI were used to assay this anti-proliferative effect and induction of apoptosis, respectively. Cells treated with RLX-loaded SSNES showed significant arrest at G2/M phase associated with significant increase in early/late-stages of apoptotic and necrotic cells. The results exhibited that RLX-loaded SSNES induces apoptosis via the activation of caspase-3 and loss of mitochondrial membrane potential. Accordingly, the proposed SSNES could be regarded as a promising platform for enhancing RLX antitumor activity against breast cancer.

Self-emulsifying Drug Delivery System for Improved Dissolution and Oral Absorption of Quetiapine Fumarate: Investigation of Drug Release Mechanism and In-vitro Intestinal Permeability

In this study, we focused on quetiapine fumarate (QTF), a class II BCS drug. QTF is an atypical antipsychotic used in the treatment of schizophrenia and bipolar disorders. Our objective was to develop a new QTF-loaded self-emulsifying drug delivery system (SEDDS) to improve the dissolution and absorption of the drug. An experimental design approach was used to develop and optimize QTF-loaded SEDDS. The optimized formulation was characterized for droplets size, zeta potential, PDI, and stability. It was then evaluated using an in-vitro combined test for dissolution and Everted gut sac technique. Mathematical modeling and Transmission electron microscopy (TEM) were used to elucidate the mechanism of release. The optimal formulation was type IIIB SEDDS, constituted of 9.1% of oleic acid, 51.6% of Tween^®20, and 39.3% of Transcutol^® P. It showed a droplets size of 144.8 ± 4.9nm with an acceptable PDI and zeta potential. For in-vitro evaluation tests, we noticed an enhancement of the dissolution rate of the optimal QTF-loaded SEDDS compared to the free drug (98.82 ± 1.24% for SEDDS after 30 min compared to 85.65 ± 2.5% for the pure drug). The release of QTF fitted with the Hopfenberg model indicating the drug was released by water diffusion and erosion mechanism. This result was confirmed by TEM images which showed a smaller droplet size after release. We also found an amelioration of the permeability of QTF of 1.69-fold from SEDDS compared to the free drug. Hence, the SEDDS formulation represented a new way to improve the dissolution and absorption of QTF.

Abdulbaqi I, Seok Ming T, Siok Yee C, A. Wahab H, Asif SM, Darwis Y. Liquid and Solid Self-Emulsifying Drug Delivery Systems (SEDDs) as Carriers for the Oral Delivery of Azithromycin: Optimization, In Vitro Characterization and Stability Assessment

Azithromycin (AZM) is a macrolide antibiotic used for the treatment of various bacterial infections. The drug is known to have low oral bioavailability (37%) which may be attributed to its relatively high molecular weight, low solubility, dissolution rate, and incomplete intestinal absorption. To overcome these drawbacks, liquid (L) and solid (S) self-emulsifying drug delivery systems (SEDDs) of AZM were developed and optimized. Eight different pseudo-ternary diagrams were constructed based on the drug solubility and the emulsification studies in various SEDDs excipients at different surfactant to co-surfactant (Smix) ratios. Droplet size (DS) < 150 nm, dispersity (Đ) ≤ 0.7, and transmittance (T)% > 85 in three diluents of distilled water (DW), 0.1 mM HCl, and simulated intestinal fluids (SIF) were considered as the selection criteria. The final formulations of L-SEDDs (L-F1(H)), and S-SEDDs (S-F1(H)) were able to meet the selection requirements. Both formulations were proven to be cytocompatible and able to open up the cellular epithelial tight junctions (TJ). The drug dissolution studies showed that after 5 min > 90% and 52.22% of the AZM was released from liquid and solid SEDDs formulations in DW, respectively, compared to 11.27% of the pure AZM, suggesting the developed SEDDs may enhance the oral delivery of the drug. The formulations were stable at refrigerator storage conditions.