Anti-Biofouling Coatings on the Tooth Surface and Hydroxyapatite

Targeted antimicrobial self-assembly peptide hydrogel with in situ bio-mimic remineralization for caries management

The single-function agents with wide-spectrum activity which tend to disturb the ecological balance of oral cavity cannot satisfy dental treatment need. A multi-functional agent with specifically targeted killing property and in situ remineralization is warranted for caries management. A novel multi-functional agent (8DSS-C8-P-113) consisting of three domains, i.e., a non-specific antimicrobial peptide (AMP) (P-113), a competence stimulating peptide (C8), and an enhancing remineralization domain (8DSS), is fabricated and evaluated in this study. The findings demonstrates that 2 μM mL-1 of 8DSS-C8-P-113 eliminates planktonic Streptococcus mutans (S. mutans) without disrupting the oral normal flora. At a concentration of 8 μM mL-1, it exhibits the ability to prevent S. mutans' adhesion. Furthermore, 8DSS-C8-P-113 self-assembles a hydrogel state at the higher concentration of 16 μM mL-1. This hydrogel self-adheres on the tooth surface, resisting acid attack, eradicating S. mutans' biofilm, and inducing mineralization in order to facilitate the repair of demineralized dental hard tissue. Its significant effectiveness in reducing the severity of dental caries is also demonstrated in vivo in a rat model. This study suggests that the multi-functional bioactive AMP 8DSS-C8-P-113 is a promising agent to specifically target pathogen, prevent tooth demineralization, and effectively induce in situ bio-mimic remineralization for the management of dental caries.

The cyclization of human salivary Histatin 1 via click chemistry for skin wound healing

Acute skin injuries can result in the breakdown of the skin barrier, heightening the risk of infections and complications. Histatin 1 (Hst1) promotes the adhesion, spreading, and migration of various skin-related cells, thus encouraging wound healing. However, Hst1 is extensively degraded upon exposure to wound exudates. Cyclized hst1 (Cyclic-hst1) has a much higher resistance to protease degradation than Hst1, thus increasing its stability and half-life. Herein, we synthesized Cyclic-hst1 via a click reaction and explored its efficacy in wound healing via cellular and animal experiments. Cyclic-hst1, at a 100-fold lower concentration than Hst1, effectively promoted acute skin wound healing. In addition, Cyclic-hst1 had a superior effect to Hst1 in terms of its anti-inflammatory, re-epithelialization, collagen deposition, and angiogenic effects, thus significantly promoting skin wound healing. Consequently, Cyclic-hst1 could represent a favorable treatment to manage acute skin wound healing, providing a promising experimental basis for clinical transformation and application.

Enhanced bacteriostasis and osseointegrative properties of SiRNA-modified polyetheretherketone surface for implant applications

Polyetheretherketone (PEEK), bearing an elastic modulus that effectively simulates the innate properties of natural bone, has come into the spotlight as a promising bone substitute material. Nonetheless, the biologically inert nature of PEEK, combined with its insubstantial osseointegration and sterilization capabilities, pose constraints on its clinical application in the realm of implants. RNA interference (RNAi), an effective technique used for gene expression regulation, has begun to be applied in implant surface modification. Herein, siCKIP-1 is securely affixed to the surface of PEEK implants, aided by an antibacterial polyphenol tannic acid (pTAN) coatings, enhancing physiologic osseointegration and inhibiting bacterial infection. This method breakthrough not merely facilitates the convenience, but also multifaceted PEEK implants' refinements. The modified PEEK implants have impressive biocompatibility coupled with a noteworthy degree of antibacterial properties. Meanwhile, modified PEEK implants improved osteogenic differentiation of rat bone mesenchymal stem cells (rBMSCs) and demonstrated excellent osteointegrative properties in rat femur implantation models. Therefore, identifying a new implant material with excellent biocompatibility and biomechanical properties is essential.

Zwitterionic Peptides: From Mechanism, Design Strategies to Applications

Zwitterionic peptides, as a type of peptide composed of charged residues, are electrically neutral, which combine the advantages of zwitterionic materials and biological peptides, exhibiting hydrophilicity and programmable properties. As attractive candidates for resisting nonspecific adsorption of biomacromolecules and microorganisms, zwitterionic peptides have been applied in materials science, biomedicine, and biochemistry over the past decade. In this review, the development of zwitterionic peptides has been systematically outlined and analyzed, including their mechanisms, structure-function relationships, and design strategies. Furthermore, this review emphasizes and discusses their recent applications for developing functional coatings, biosensors, drug delivery systems, and engineering proteins. Finally, future research perspectives and challenges of zwitterionic peptides are also prospected and discussed. This review is intended to provide clarity and insight into the design and applications of zwitterionic peptides.

Advances in Hydrogels for Periodontitis Treatment

Periodontitis is a common condition characterized by a bacterial infection and the disruption of the body's immune-inflammatory response, which causes damage to the teeth and supporting tissues and eventually results in tooth loss. Current therapy involves the systemic and local administration of antibiotics. However, the existing treatments cannot exert effective, sustained release and maintain an effective therapeutic concentration of the drug at the lesion site. Hydrogels are used to treat periodontitis due to their low cytotoxicity, exceptional water retention capability, and controlled drug release profile. Hydrogels can imitate the extracellular matrix of periodontal cells while offering suitable sites to load antibiotics. This article reviews the utilization of hydrogels for periodontitis therapy based on the pathogenesis and clinical manifestations of the disease. Additionally, the latest therapeutic strategies for smart hydrogels and the main techniques for hydrogel preparation have been discussed. The information will aid in designing and preparing future hydrogels for periodontitis treatment.

Supramolecular Self-Healing Antifouling Coating for Dental Materials

In orthodontic treatment, orthodontic appliances are prone to bacterial infections, which pose a risk to oral health. Surface modification of orthodontic appliances has been explored to improve their antifouling properties and impart antibacterial capabilities, inhibiting initial bacterial adhesion and biofilm formation. However, coatings are susceptible to damage in the complex oral environment, leading to a loss of functionality. Here, we have prepared an antifouling self-healing coating based on supramolecular bonding by employing a simple spin coating method. The presence of the hydrophilic zwitterionic trimethylamine N-oxide (TMAO) and the hydrophobic antimicrobial moieties triclosan acrylate (TCSA) imparts to the polymers an amphiphilic structure and enhances the interaction with bacteria, resulting in excellent antimicrobial activity and surface antifouling properties. The multiple hydrogen bonds of ureido-pyrimidinone methacrylate (UPyMA) and ionic interactions contained in the polymers not only increased the adhesion of the coating to the material substrate (approximately 3 times) but also endowed the coating with the intrinsic self-healing ability to restore the antibiofouling properties at oral temperature and humidity. Finally, the polymer coating is biologically safe both in vitro and in vivo, showing no cytotoxic effects on cells and tissues. This research offers a promising avenue for improving the performance of orthodontic appliances and contributes to the maintenance and treatment of oral health.

Untargeted metabolomics of saliva in caries-active and caries-free children in the mixed dentition

Objective

To compare the differences in salivary metabolites between caries-active and caries-free children in the mixed dentition, and explore their correlation with caries status.

Methods

The study involved 20 children (aged 8–9 years) in the mixed dentition, including 10 caries-active (aged 8.6 ± 0.49years) and 10 caries-free children(aged 8.5 ± 0.5years), with a male/female ratio of 1:1. The saliva samples were collected from all children. Metabolite extraction, LC-MS/MS-based untargeted metabolomics, qualitative and semi-quantitative analysis and bioinformatics analysis were performed to identify differential metabolites between the two sample groups. The differential metabolites identified were further analyzed in an attempt to find their correlations with caries status.

Results

In the positive ion mode, a total of 1606 molecular features were detected in the samples of the two groups, 189 of which were differential metabolites when comparing the caries-active group with the caries-free group, including 104 up-regulated and 85 down-regulated metabolites. In the negative ion mode, a total of 532 molecular features were detected in the samples of two groups, 70 of which were differential metabolites when comparing the caries-active group with the caries-free group, including 37 up-regulated and 33 down-regulated metabolites. In the positive ion mode, two of the top 5 up-regulated differential metabolites were found in and annotated to specific metabolic pathways, whereas in the negative ion mode, only one of the top 5 up-regulated differential metabolites was found in and annotated to specific metabolic pathways. In both the positive and negative ion modes, the top 5 down-regulated differential metabolites were both annotated to the metabolic pathways. KEGG pathway enrichment analysis of differential metabolites showed that histamine and arachidonic acid identified in the positive ion mode, as well as succinate and L-histidine identified in the negative ion mode were enriched in the top 3 significantly altered pathways.

Conclusion

The enriched differential metabolites including histamine, L-histidine and succinate were correlated with the presence of dental caries, but their role in the caries process needs to be further investigated.

Mussel-Inspired Caries Management Strategy: Constructing a Tribioactive Tooth Surface with Remineralization, Antibiofilm, and Anti-inflammation Activity

Dental caries is a common chronic oral disease in humans resulting from tooth demineralization caused by acid production of bacterial plaque, which leads to the destruction of enamel and dentin and oral inflammation. However, it is still a challenge that the function of natural active ingredients in currently available oral care products is not comprehensive, especially the lack of remineralization. Here, inspired by the strong biological adhesion ability of mussels and ancient oral disease plant therapy, a multifunctional strategy is proposed to construct a bioactive tooth surface to treat dental caries. It has been demonstrated that the Turkish gall extract (TGE) can inhibit adhesion of cariogenic bacteria Streptococcus mutans and Actinomyces viscosus and destroy biofilms on the tooth surface. Meanwhile, TGE can reduce the expression of inflammatory factors. Notably, the TGE coating can induce the growth of hydroxyapatite (HAP) crystals in vivo and in vitro, recovering the enamel mechanical properties under normal oral conditions. MD simulations interpreted the adsorption mechanism by which the hydroxyl groups in TGE bind to phosphate group (PO₄^3-) on the tooth surface, attracting calcium ions (Ca²⁺) as nucleation sites for remineralization. This work underlines the importance of TGE coating in remineralization, antibiofilm, and anti-inflammation activity as a promising strategy for dental caries.

Combining Topography and Chemistry to Produce Antibiofouling Surfaces: A Review

Despite decades of research on the reduction of surface fouling from biomolecules or micro-organisms, the ultimate antibiofouling surface remains undiscovered. The recent covid-19 pandemic strengthened the crucial need for such treatments. Among the numerous approaches that are able to provide surfaces with antibiofouling properties, chemical, biological, and topographical strategies have been implemented for instance in the marine, medical, or food industries. However, many of these methods have a biocidal effect and, with antibioresistance and biocide resistance a growing threat on humanity, strategies based on reducing adsorption of biomolecules and micro-organism are necessary for long-term solutions. Bioinspired strategies, combining both surface chemistry and topography, are currently at the heart of the best innovative and sustainable solutions. The synergistic effect of micro/nanostructuration, together with engineered chemical or biological functionalization is believed to contribute to the development of antibiofouling surfaces. This review aims to present approaches combining hydrophobic or hydrophilic chemistries with a specific topography to avoid biofouling in various industrial environments and healthcare facilities.

Emergence of Nano-Dentistry as a Reality of Contemporary Dentistry

(1) Background. Nanotechnology offers significant alternative ways to solve scientific, medical, and human health issues. Dental biomaterials were improved by nanotechnology. It manufactures better materials or improves the existing ones and forms the basis of novel methods for disease diagnosis and prevention. Modern nanotechnology makes oral health care services more acceptable for patients. Nanotechnology is now important area of research, covering a broad range of applications in dentistry. (2) Methods. Relevant literature from Scopus published in English was selected using the keywords “nanoparticle” and “dentistry”. To the selected articles we applied the inclusion and exclusion criteria to choose the relevant ones. (3) Results. Based on the relevant articles, a literature review was prepared. This review provides an insight into the applications of nanotechnology in various branches of dentistry. We applied several regression models to fit number of papers versus time and chose the best one. We used it to construct the forecast and its 95%-confidence interval for the number of publications in 2022–2026. (4) Conclusions. It shows that a significant rise in papers is expected. This review familiarizes dentists with properties and benefits of nanomaterials and nanotechnology. Additionally, it can help scientists to consider the direction of their research and to plan prospective research projects.

A Novel Strategy for Caries Management: Constructing an Antibiofouling and Mineralizing Dual-Bioactive Tooth Surface

Existing single-functional agents against dental caries are inadequate in antibacterial performance or mineralization balance. This problem can be resolved through a novel strategy, namely, the construction of an antibiofouling and mineralizing dual-bioactive tooth surface by grafting a dentotropic moiety to an antimicrobial peptide. The constructed bioactive peptide can strongly adsorb onto the tooth surface and has beneficial functions in a myriad of ways. It inhibits cariogenic bacteria Streptococcus mutans adhesion, kills planktonic S. mutans, and destroys the S. mutans biofilm on the tooth surface. It also protects teeth from demineralization in acidic environments, and induces self-healing regeneration in the remineralization environment. Molecular dynamics simulations elucidate the main adsorption mechanism that the positively charged amino acid residues in the bioactive peptide bind to phosphate groups on the tooth surface, and the main mineralization mechanism that the negative charges on the outermost layer of the bioactive peptide repel acetic acid ions and attract calcium ions as nucleation sites for remineralization. This study suggests that this in-house synthesized dual-bioactive peptide is a promising functional agent to prevent dental caries, and is effective in inducing in situ self-healing remineralization for the treatment of decayed teeth.