Precisely Fabricated Sulpiride-Loaded Nanolipospheres with Ameliorated Oral Bioavailability and Antidepressant Activity

Enhanced intestinal permeation of novel sulpiride electrospun nanofibers: formulation, optimization, and ex vivo evaluation of drug absorption

SIGNIFICANCE

Electrospinning presents a promising avenue for drug delivery applications by integrating traditional solid dispersion methods with nano-medicinal strategies. Electrospun nanofibers (NFs) can be tailored to control the composition, diameter, and orientation of the NFs based on the intended application.

OBJECTIVES

Herein, we aim to fabricate novel polymeric NFs loaded with sulpiride (SUL) utilizing Eudragit L100-55 (EL100-55) polymers to improve the dissolution and permeability of a model class IV drug.

METHODS

Various factors were assessed to optimize the electrospun NF formulation, including polymer concentrations, flow rate, and drug amount.

RESULTS

The electrospinning process yielded defect-free SUL-loaded EL100-55 NFs. The physicochemical analysis demonstrated favorable attributes in all formulations, encompassing high drug loading, encapsulation efficiency, and rapid drug release. Nanofiber formulations exhibited superior dissolution due to their extensive surface area. Modified non-everted sac experiments revealed a twofold increase in SUL permeation through the intestinal membrane upon EL100-55 encapsulation, emphasizing its impact on tight junction modulation in both NF and solid dispersion formulations. Enhanced drug permeation in the NF formulation involved dual mechanisms: transcellular diffusion and widening of the paracellular pathway. In contrast, the solid dispersion formulation prepared via solvent evaporation predominantly widened the paracellular pathway. Visualization techniques illustrated the NFs' robust affinity for the transcellular pathway.

CONCLUSION

Sulpiride encapsulation into EL100-55-NF is a promising solution for BCS class IV drugs facing solubility and permeability challenges.

Innovative Gastrointestinal Drug Delivery Systems: Nanoparticles, Hydrogels, and Microgrippers

Over the past decade, new technologies have emerged to increase intrinsic potency, enhance bioavailability, and improve targeted delivery of drugs. Most pharmaceutical formulations require multiple dosing due to their fast release and short elimination kinetics, increasing the risk of adverse events and patient non-compliance. Due to these limitations, enormous efforts have focused on developing drug delivery systems (DDSs) for sustained release and targeted delivery. Sustained release strategies began with pioneering research using silicone rubber embedding for small molecules and non-inflammatory polymer encapsulation for proteins or DNA. Subsequently, numerous DDSs have been developed as controlled-release formulations to deliver systemic or local therapeutics, such as small molecules, biologics, or live cells. In this review, we discuss the latest developments of DDSs, specifically nanoparticles, hydrogels, and microgrippers for the delivery of systemic or localized drugs to the gastrointestinal (GI) tract. We examine innovative DDS design and delivery strategies tailored to the GI tract's unique characteristics, such as its extensive length and anatomical complexity, varying pH levels and enzymatic activity across different sections, and intrinsic peristalsis. We particularly emphasize those designed for the treatment of inflammatory bowel disease (IBD) with in vivo preclinical studies.

Intranasal delivery of sulpiride nanostructured lipid carrier to central nervous system; in vitro characterization and in vivo study

The low and erratic oral absorption of sulpiride (SUL) a dopaminergic receptor antagonist, and its P-glycoprotein efflux in the gastrointestinal tract restricted its oral route for central nervous system disorders. An intranasal formulation was formulated based on nanostructured lipid carrier to tackle these obstacles and deliver SUL directly to the brain. Sulipride-loaded nanostructured lipid carrier (SUL-NLC) was prepared using compritol®888 ATO and different types of liquid lipids and emulsifiers. SUL-NLCs were characterized for their particle size, charge, and encapsulation efficiency. Morphology and compatibility with other NLC excipients were also studied. Moreover, SUL in vitro release, nanodispersion stability, in vivo performance and SUL pharmacokinetics were investigated. Results delineates that SUL-NLC have a particle size ranging from 366.2 ± 62.1 to 640.4 ± 50.2 nm and encapsulation efficiency of 75.5 ± 1.5%. SUL showed a sustained release pattern over 24 h and maintained its physical stability for three months. Intranasal SUL-NLC showed a significantly (p < 0.01) higher SUL brain concentration than that found in plasma after oral administration of commercial SUL product with 4.47-fold increase in the relative bioavailability. SUL-NLCs as a nose to brain approach is a promising formulation for enhancing the SUL bioavailability and efficient management of neurological disorders.

Development of Glycerosomal pH Triggered In Situ Gelling System to Ameliorate the Nasal Delivery of Sulpiride for Pediatric Psychosis

Sulpiride (Sul) is a medication that blocks dopamine D2 receptors. It is used to treat gastrointestinal disturbances and has antipsychotic effects depending on the dose given. Sulpiride is subject to P-glycoprotein efflux, resulting in limited bioavailability and erratic absorption. Hence, the aim of this study was to generate a glycerosomal in situ gel of sulpiride for intranasal administration, specifically targeting children with schizophrenia who may have difficulty swallowing traditional solid medications, for enhancing its bioavailability. This study aimed to demonstrate the efficacy of intranasal administration of glycerin-encapsulated lipid-nanovesicles (glycerosomes) mixed with in situ gels for prolonged release of anti-psychotic medication. A Box-Behnken design was utilized to create sulpiride-loaded glycerosomes (Sul-GMs), with the lipid amount (A), glycerin concentration (B), and sonication time (C) acting as independent variables. Their impact on the entrapment efficiency, EE% (Y1), and in vitro drug release (Y2) were evaluated. The sulpiride EE% showed an increase when the glycerin concentration was raised to 25% v/v. Nevertheless, when the glycerin concentration was raised to 40% v/v, there was a notable decrease in the EE%. The optimized glycerosome was added to pH triggered carbopol 974P in situ gel formulations including HPMC K15M with different concentrations. The in situ gel formulation (G3) comprising 0.6% carbopol 974P and 0.6% hydroxypropyl methyl cellulose-K15M (HPMC K15M) demonstrated suitable pH, viscosity, desired gel strength, spreadability, and mucoadhesive strength. Consequently, it was selected for in vitro study, ex vivo permeation investigation, and in vivo evaluations. The glycerosomal in situ gel exhibited favorable ex vivo permeability of SU when applied to the nasal mucosa. The pharmacokinetic investigation revealed that the optimized Sul-loaded glycerosomal in situ gel exhibited a significant fourfold and twofold enhancement in systemic bioavailability compared to both the control gel and the commercially available formulation. Finally, the intranasal administration of Sul-loaded glycerosomal in situ gel is a promising alternative to oral treatment for pediatric patients with psychosis.

The Exploitation of Sodium Deoxycholate-Stabilized Nano-Vesicular Gel for Ameliorating the Antipsychotic Efficiency of Sulpiride

The present study explored the effectiveness of bile-salt-based nano-vesicular carriers (bilosomes) for delivering anti-psychotic medication, Sulpiride (Su), via the skin. A response surface methodology (RSM), using a 33 Box-Behnken design (BBD) in particular, was employed to develop and optimize drug-loaded bilosomal vesicles. The optimized bilosomes were assessed based on their vesicle size, entrapment efficiency (% EE), and the amount of Sulpiride released. The Sulpiride-loaded bilosomal gel was generated by incorporating the optimized Su-BLs into a hydroxypropyl methylcellulose polymer. The obtained gel was examined for its physical properties, ex vivo permeability, and in vivo pharmacokinetic performance. The optimum Su-BLs exhibited a vesicle size of 211.26 ± 10.84 nm, an encapsulation efficiency of 80.08 ± 1.88% and a drug loading capacity of 26.69 ± 0.63%. Furthermore, the use of bilosomal vesicles effectively prolonged the release of Su over a period of twelve hours. In addition, the bilosomal gel loaded with Su exhibited a three-fold increase in the rate at which Su transferred through the skin, in comparison to oral-free Sulpiride. The relative bioavailability of Su-BL gel was almost four times as high as that of the plain Su suspension and approximately two times as high as that of the Su gel. Overall, bilosomes could potentially serve as an effective technique for delivering drugs through the skin, specifically enhancing the anti-psychotic effects of Sulpiride by increasing its ability to penetrate the skin and its systemic bioavailability, with few adverse effects.

Tailoring Efficient Fluorogenic Tactic for Ultrasensitive Detection of Dopamine in Urine and Rat Brain through Real-Time and In Situ Formation of High-Performance Fluorophore

Owing to the predominance of dopamine (DA) in controlling mental health, planning an innovative method for DA detection with simplicity and high efficacy is conducive to the assessment of neurological disorders. Herein, an efficient fluorogenic tactic has been elaborated for ultrasensitive detection of DA with remarkably enhanced turn-on response. Utilizing a twisted intramolecular charge-transfer (TICT)-suppressing strategy, a highly emissive azocine derivative 11-hydroxy-2,3,6,7,11,12,13,14-octahydro-1H,5H,10H-11,14a-methanoazocino[5',4':4,5]furo[2,3-f]pyrido[3,2,1-ij]quinolin-10-one (J-Aza) is generated via a one-step reaction between DA and 8-hydroxyjulolidine. It is marvelous that J-Aza not only possesses ideal fluorescence quantum yield (ΦF) as high as 0.956 but also exhibits bathochromic shifted fluorescence (green emissive) and stronger anti-photobleaching capacity superior to traditional azocine-derived 1,2,3,4-tetrahydro-5H-4,11a-methanobenzofuro[2,3-d]azocin-5-one (Aza) with moderate ΦF, blue fluorescence, and poor photostability. By confining the TICT process, the detection limit to DA can be reduced to 80 pM, which is competitive in contrast to previously reported fluorescence methods. Encouraged by the instant response (within 90 s), wide linear range (0.1-500 nM), great selectivity, and excellent sensitivity, this fluorogenic method has been used for the real-time measurement of DA contents in practical urine samples with satisfactory results. Furthermore, the cerebral DA level in the reserpine-induced depression rat model has also been evaluated by our designed method, demonstrating its potent analytical applicability in the biosensing field.

Atorvastatin-loaded pro-nanolipospheres with ameliorated oral bioavailability and antidyslipidemic activity

Despite significant advances in oral drug delivery technologies, many drugs are prone to limited oral bioavailability due to biological barriers that hinder drug absorption. Pro-nanolipospheres (PNL) are a form of delivery system that can potentiate the oral bioavailability of poorly water-soluble drugs through a variety of processes, including increased drug solubility and protecting them from degradation by intestinal or hepatic first-pass metabolism. In this study, pro-nanolipospheres were employed as a delivery vehicle for improving the oral bioavailability of the lipophilic statin, atorvastatin (ATR). Various ATR-loaded PNL formulations, composed of various pharmaceutical ingredients, were prepared by the pre-concentrate method and characterized by determining particle size, surface charge, and encapsulation efficiency. An optimized formula (ATR-PT PNL) showing the smallest particle size, highest zeta potential, and highest encapsulation efficiency was selected for further in vivo investigations. The in vivo pharmacodynamic experiments demonstrated that the optimized ATR-PT PNL formulation exerted a potent hypolipidemic effect in a Poloxamer® 407-induced hyper-lipidaemia rat model by restoring normal cholesterol and triglyceride serum levels along with alleviating serum levels of LDL while elevating serum HDL levels, compared to pure drug suspensions and marketed ATR (Lipitor®). Most importantly, oral administration of the optimized ATR-PT PNL formulation showed a dramatic increase in ATR oral bioavailability, as evinced by a 1.7- and 3.6-fold rise in systemic bioavailability when compared with oral commercial ATR suspensions (Lipitor®) and pure drug suspension, respectively. Collectively, pro-nanolipospheres might represent a promising delivery vehicle for enhancing the oral bioavailability of poorly water-soluble drugs.

Brain Targeting of Quetiapine Fumarate via Intranasal Delivery of Loaded Lipospheres: Fabrication, In-Vitro Evaluation, Optimization, and In-Vivo Assessment

A liposphere system for intranasal delivery of quetiapine fumarate (QTF) was created to assess the potential for enhanced drug delivery. We investigated the effects of particle size, entrapment effectiveness, poly dispersibility index, and pluronic incorporation percentage on these variables. The optimal formula was examined using a TEM, and investigations into DSC, XRD, and FTIR were made. Optimized liposphere formulation in vitro dissolution investigation with a mean diameter of 294.4 ± 18.2 nm revealed about 80% drug release in 6 h. The intranasal injection of QTF-loaded lipospheres showed a shorter T_max compared to that of intranasal and oral suspension, per the findings of an in vivo tissue distribution investigation in Wistar mice. Lipospheres were able to achieve higher drug transport efficiency (DTE %) and direct nose-to-brain drug transfer (DTP %). A potentially effective method for delivering QTF to specific brain regions is the liposphere system.

Overcoming the Drawbacks of Sulpiride by Means of New Crystal Forms

This study aims at developing new multicomponent crystal forms of sulpiride, an antipsychotic drug. The main goal was to improve its solubility since it belongs to class IV of the BCS. Nine new adducts were obtained by combining the active pharmaceutical ingredient with acid coformers: a salt cocrystal and eight molecular salts. In addition, three novel co-drugs, of which two are molecular salts and one is a cocrystal, were also achieved. All samples were characterized in the solid state by complementary techniques (i.e., infrared spectroscopy, powder X-ray diffraction and solid-state NMR). For systems for which it was possible to obtain good-quality single crystals, the structure was solved by single crystal X-ray diffraction (SCXRD). SCXRD combined with solid-state NMR were used to evaluate the ionic or neutral character of the adducts. In vitro dissolution tests of the new crystal forms were performed and all the adducts display remarkable dissolution properties with respect to pure sulpiride.

Thiolated Chitosan Microneedle Patch of Levosulpiride from Fabrication, Characterization to Bioavailability Enhancement Approach

In this study, a first attempt has been made to deliver levosulpiride transdermally through a thiolated chitosan microneedle patch (TC-MNP). Levosulpiride is slowly and weakly absorbed from the gastrointestinal tract with an oral bioavailability of less than 25% and short half-life of about 6 h. In order to enhance its bioavailability, levosulpiride-loaded thiolated chitosan microneedle patches (LS-TC-MNPs) were fabricated. Firstly, thiolated chitosan was synthesized and characterized by nuclear magnetic resonance (1HNMR) spectroscopy, attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, differential scanning calorimetry (DSC), and X-ray diffraction (XRD). Thiolated chitosan has been used in different drug delivery systems; herein, thiolated chitosan has been used for the transdermal delivery of LS. LS-TC-MNPs were fabricated from different concentrations of thiolated chitosan solution. Furthermore, the levosulpiride-loaded thiolated chitosan microneedle patch (LS-TC-MNP) was characterized by FTIR spectroscopic analysis, scanning electron microscopy (SEM) study, penetration ability, tensile strength, moisture content, patch thickness, and elongation test. LS-TC-MNP fabricated with 3% thiolated chitosan solution was found to have the best tensile strength, moisture content, patch thickness, elongation, drug-loading efficiency, and drug content. Thiolated chitosan is biodegradable, nontoxic and has good absorption and swelling in the skin. LS-TC-MNP-3 consists of 100 needles in 10 rows each with 10 needles. The length of each microneedle was 575 μm; they were pyramidal in shape, with sharp pointed ends and a base diameter of 200 µm. The microneedle patch (LS-TC-MNP-3) resulted in-vitro drug release of 65% up to 48 h, ex vivo permeation of 63.6%, with good skin biocompatibility and enhanced in-vivo pharmacokinetics (AUC = 986 µg/mL·h, Cmax = 24.5 µg/mL) as compared to oral LS dispersion (AUC = 3.2 µg/mL·h, Cmax = 0.5 µg/mL). Based on the above results, LS-TC-MNP-3 seems to be a promising strategy for enhancing the bioavailability of levosulpiride.