Nanotechnology in dentistry: prevention, diagnosis, and therapy

Selected muscle tone and asymmetry of the occlusal plane in case of intracapsular temporomandibular joint disorder

Objective: To discover the extent of the connection between occlusal plane asymmetry and the rest tone of the four muscle groups of the orofacial region with temporomandibular joint pathology.Methods: Eighty-seven subjects were divided into two groups. The following methods were applied: clinical examination, roentgenological examination, and electromyography. Data were evaluated and statistically analyzed.Results: The variability of occlusal plane inclination in relation to the porion plane was 0-4.6º.The tonus of masseter muscle was higher in the experimental group: 1.45 mV more than in the control group: 1.23 mV (p < 0.05).Conclusion: Asymmetry of the occlusal plane inclination was found for nearly all subjects in both groups. It can be compensated for by adaptation mechanisms and does not cause temporomandibular joint disorders. Undertaken research shows the existence of a proven correlation between TMJ disorders and the resting tonus of the masseter muscle.

A Comprehensive Narrative Review of Nanomaterial Applications in Restorative Dentistry: Demineralization Inhibition and Remineralization Applications (Part I)

Nanotechnology is extensively employed in various aspects of dentistry, including restorative dentistry, because of its substantial improvement and promising potential in the clinical efficacy of restorative materials and procedures. The main purpose of this review is to explore the different uses of nanomaterials in restorative dentistry. The review is divided into two parts: the current review (Part 1) focuses on the prevention of demineralization and promotion of remineralization, while the upcoming review (Part 2) will discuss the reinforcement of restorative materials and their therapeutic applications. Nanofillers are added to dental materials to boost their antibacterial, anticaries, and demineralization inhibitory capabilities. Additionally, they improve remineralization and enhance both mechanical properties and therapeutic features. The nanoparticles (NPs) used to increase antibacterial and remineralization inhibitions can be classified into two main groups: inorganic and organic NPs. Examples of inorganic NPs include silver, zinc oxide, titanium oxide, and gold. Examples of organic NPs include silica, quaternary ammonium salt monomers, and chitosan NPs. Furthermore, the nanofillers utilized to enhance the process of remineralization include various types such as metals, nano-hydroxyapatite, nano-amorphous calcium phosphate (ACP), dicalcium phosphate NPs, casein phosphopeptide-ACP (CPP-ACP), and calcium fluoride NPs. These uses underscore the potential applications of NPs in restorative dentistry, although there are still some limitations to address.

Effect of the association of microparticles and nano-sized β-calcium glycerophosphate in conventional toothpaste on enamel remineralization: In situ study

OBJECTIVES

This in situ study aimed to assess the remineralizing effect of a fluoride toothpaste supplemented with β-calcium glycerophosphate in both micro (β-CaGPm) and nano-sized forms (β-CaGPn).

METHODS

This blind and cross-over study was performed in 4 phases, each spanning 3 days. Twelve volunteers utilized palatal appliances containing four bovine enamel blocks with artificial caries lesions. Volunteers were randomly assigned to the following treatment groups: Placebo (no F-β-CaGPm-β-CaGPn); 1100 ppm F alone (1100F); 1100F plus 0.5% micrometric β-CaGP (1100F-0.5%β-CaGPm); and 1100F plus 0.25%nano-sized β-CaGP (1100F-0.25%β-CaGPn). Participants were instructed to brush their natural teeth with the palatal appliances in the mouth for 1 min (3 times/day), ensuring that the enamel blocks were exposed to the natural toothpaste slurries. Following each phase, evaluations were conducted to determine the percentage of surface hardness recovery (%SHR), integrated recovery of subsurface hardness (ΔIHR), profile subsurface lesion through polarized light microscopy (PLM), as well as fluoride (F), calcium (Ca), and phosphorus (P) concentrations within the enamel. Data were analyzed by ANOVA and Student-Newman-Keuls test (p < 0.001).

RESULTS

Treatment with 1100F-0.25%β-CaGPn resulted in %SHR ∼69 % and ∼40 % higher when compared to 1100F and 1100F-0.5%β-CaGPm (p < 0.001). The reduction in lesion body (ΔIHR; PLM) was ∼40 % higher with 1100F-0.25%β-CaGPn (p < 0.001) compared to 1100F. The addition of β-CaGPm and β-CaGPn did not influence enamel F concentration (p > 0.001). Treatment with 1100F-0.25%β-CaGPn led to an increase in the concentration of Ca and P in the enamel (p < 0.001).

CONCLUSION

The addition of 0.25%β-CaGPn into 1100F formulation increased the bioavailability of calcium and phosphate, promoting a higher remineralizing effect.

CLINICAL SIGNIFICANCE

Toothpaste containing 1100F-0.25%β-CaGPn showed a potential of higher remineralization to 1100 ppm F and 1100 ppm F micrometric β-CaGP could be a strategy for patients at caries activity.

Effect of dental composite dust on human gingival keratinocytes

OBJECTIVE

The aim was to investigate the effect of particles released during grinding of dental composites on human gingival keratinocytes (HGK).

METHODS

Specimens from Filtek™ Supreme XTE and ceram.x® universal were prepared and ground to dust. The dust was filtered (≤ 5 µm) and the particle size distribution was examined using NANO-flex®-180° dynamic light scattering (DLS). Suspensions at five concentrations (3, 10, 30, 100 and 300 µg/mL) were prepared using keratinocyte growth medium (KGM). These suspensions, as well as a positive (CuO) and a negative control (KGM) were added to HGK. The cells treated with Filtek™ Supreme XTE suspensions were analyzed by real-time monitoring using RTCA iCELLigence™. In addition, light and scanning electron microscopic images of the exposed cells were taken. Indirect immunofluorescence staining was performed to detect the extracellular matrix protein fibronectin.

RESULTS

In distilled water, DLS showed similar particles' range (171.9 nm- 2.7 µm) for both composites. In saliva, larger particles were detected (Filtek™ Supreme XTE: 243 nm-6,5 µm; ceram.x® universal: 204 nm- 4,6 µm). iCELLigence™ revealed similar results of cell growth parameters for HGK incubated with composite dust (≤ 5 µm) at different concentrations. The microscopic images indicated unaltered cell structures and formation of large agglomerates with high particle concentration (> 100 µg/mL). Exposure to composite dust resulted in upregulation of fibronectin expression.

SIGNIFICANCE

Grinding of dental composite materials generates dust particles of different sizes. The particle size distribution seems to be more influenced by the suspending medium than the material itself. While cell growth of HGK seem not to be affected by the particles, an upregulation of fibronectin in the intercellular space concomitant by increasing particle concentration may indicate an increase of cell migration/mobility.

Contemporary research trends on nanoparticles in endodontics: a bibliometric and scientometric analysis of the top 100 most-cited articles

Objectives

Advancements in nanotechnology have led to the widespread usage of nanoparticles in the endodontic field. This bibliometric study aimed to determine and analyze the top 100 most-cited articles about nanoparticles in endodontics from 2000 to 2022.

Materials and Methods

A detailed electronic search was conducted on the "Clarivate Analytics Web of Science, All Databases" to receive the most-cited articles related to the topic. Articles were ranked in descending order based on their citation counts, and the first 100 were selected for bibliometric analysis. Parameters such as citation density, publication year, journal, country, institution, author, study design, study field, evidence level, and keywords were analyzed.

Results

The top 100 most-cited articles received 4,698 citations (16-271) with 970.21 (1.91-181) citation density in total. Among decades, citations were significantly higher in 2011-2022 (p < 0.001). Journal of Endodontics had the largest number of publications. Canada and the University of Toronto made the highest contribution as country and institution, respectively. Anil Kishen was the 1 who participated in the largest number of articles. The majority of the articles were designed in vitro. The main study field was "antibacterial effect." Among keywords, "nanoparticles" followed by "Enterococcus faecalis" were used more frequently.

Conclusions

Developments in nanotechnology had an impact on the increasing number of studies in recent years. This bibliometric study provides a comprehensive view of nanoparticle advances and trends using citation analysis.

A Comparison of Antimicrobial Efficacy of Silver-based Preventive Restorations (Silver Nitrate, Silver Diamine Fluoride, and Silver Nanoparticles) against Streptococcus mutans Monospecies Biofilm Model

Aim

The ability of the Streptococcus mutans (S. mutans) to form biofilms is not only crucial in the initiation of early childhood caries (ECC) but is also a challenge to its treatment. The current management protocols focus on remineralization and use of antimicrobial formulations which penetrate biofilms, control their formation, and decrease the incidence of caries in children. The paradigm shift toward preventive protocols and increasing antibiotic resistance rekindled the use of silver as a promising antibacterial agent. To gain further insight into the therapeutic potential, aim of the present study was to compare the antibacterial efficacy of silver-based preventive restorations [silver nitrate (AgNO3), silver diamine fluoride (SDF), and silver nanoparticles (AgNPs)] against S. mutans species.

Materials and methods

Using an ex vivo monospecies biofilm model of S. mutans; the antimicrobial efficacy of three treatment groups (SDF, AgNO3, and AgNPs) was evaluated.

Results

There was a significant difference between the negative control and three treatment groups (SDF, AgNO3, and AgNPs). The results showed that the mean diameter of inhibition zones obtained in biofilms treated with AgNPs was 40.3 ± 0.25 mm which was greater than both SDF (37.7 ± 0.18 mm) and AgNO3 (36.26 ± 0.18 mm).

Conclusion

The study concluded that the number of viable bacteria was significantly reduced by all three medicaments (p < 0.05). However, AgNPs showed the highest antimicrobial activity in comparison to SDF and AgNO3 against S. mutans biofilm.

Clinical significance

The present study thus supports that AgNPs are a promising preventive anticaries agent due to their better antibacterial activity in comparison to other silver-based preventive restorations and can be effectively used as an alternative to SDF or AgNO3 for the noninvasive treatment of ECC in the young.

How to cite this article

Sharma P, Dhawan P, Rajpal SK, et al. A Comparison of Antimicrobial Efficacy of Silver-based Preventive Restorations (Silver Nitrate, Silver Diamine Fluoride, and Silver Nanoparticles) against Streptococcus mutans Monospecies Biofilm Model. Int J Clin Pediatr Dent 2023;16(S-1):S13-S19.

Therapeutic applications of nanobiotechnology

Nanobiotechnology, as a novel and more specialized branch of science, has provided a number of nanostructures such as nanoparticles, by utilizing the methods, techniques, and protocols of other branches of science. Due to the unique features and physiobiological characteristics, these nanostructures or nanocarriers have provided vast methods and therapeutic techniques, against microbial infections and cancers and for tissue regeneration, tissue engineering, and immunotherapies, and for gene therapies, through drug delivery systems. However, reduced carrying capacity, abrupt and non-targeted delivery, and solubility of therapeutic agents, can affect the therapeutic applications of these biotechnological products. In this article, we explored and discussed the prominent nanobiotechnological methods and products such as nanocarriers, highlighted the features and challenges associated with these products, and attempted to conclude if available nanostructures offer any scope of improvement or enhancement. We aimed to identify and emphasize the nanobiotechnological methods and products, with greater prospect and capacity for therapeutic improvements and enhancements. We found that novel nanocarriers and nanostructures, such as nanocomposites, micelles, hydrogels, microneedles, and artificial cells, can address the associated challenges and inherited drawbacks, with help of conjugations, sustained and stimuli-responsive release, ligand binding, and targeted delivery. We recommend that nanobiotechnology, despite having few challenges and drawbacks, offers immense opportunities that can be harnessed in delivering quality therapeutics with precision and prediction. We also recommend that, by exploring the branched domains more rigorously, bottlenecks and obstacles can also be addressed and resolved in return.

The Effects of Titanium Dioxide Nanoparticles on Osteoblasts Mineralization: A Comparison between 2D and 3D Cell Culture Models

Although several studies assess the biological effects of micro and titanium dioxide nanoparticles (TiO₂ NPs), the literature shows controversial results regarding their effect on bone cell behavior. Studies on the effects of nanoparticles on mammalian cells on two-dimensional (2D) cell cultures display several disadvantages, such as changes in cell morphology, function, and metabolism and fewer cell-cell contacts. This highlights the need to explore the effects of TiO₂ NPs in more complex 3D environments, to better mimic the bone microenvironment. This study aims to compare the differentiation and mineralized matrix production of human osteoblasts SAOS-2 in a monolayer or 3D models after exposure to different concentrations of TiO₂ NPs. Nanoparticles were characterized, and their internalization and effects on the SAOS-2 monolayer and 3D spheroid cells were evaluated with morphological analysis. The mineralization of human osteoblasts upon exposure to TiO₂ NPs was evaluated by alizarin red staining, demonstrating a dose-dependent increase in mineralized matrix in human primary osteoblasts and SAOS-2 both in the monolayer and 3D models. Furthermore, our results reveal that, after high exposure to TiO₂ NPs, the dose-dependent increase in the bone mineralized matrix in the 3D cells model is higher than in the 2D culture, showing a promising model to test the effect on bone osteointegration.

Drug-delivery nanoparticles for bone-tissue and dental applications

The use of nanoparticles as biomaterials with applications in the biomedical field is growing every day. These nanomaterials can be used as contrast imaging agents, combination therapy agents, and targeted delivery systems in medicine and dentistry. Usually, nanoparticles are found as synthetic or natural organic materials, such as hydroxyapatite, polymers, and lipids. Besides that, they are could also be inorganic, for instance, metallic or metal-oxide-based particles. These inorganic nanoparticles could additionally present magnetic properties, such as superparamagnetic iron oxide nanoparticles. The use of nanoparticles as drug delivery agents has many advantages, for they help diminish toxicity effects in the body since the drug dose reduces significantly, increases drugs biocompatibility, and helps target drugs to specific organs. As targeted-delivery agents, one of the applications uses nanoparticles as drug delivery particles for bone-tissue to treat cancer, osteoporosis, bone diseases, and dental treatments such as periodontitis. Their application as drug delivery agents requires a good comprehension of the nanoparticle properties and composition, alongside their synthesis and drug attachment characteristics. Properties such as size, shape, core-shell designs, and magnetic characteristics can influence their behavior inside the human body and modify magnetic properties in the case of magnetic nanoparticles. Based on that, many different studies have modified the synthesis methods for these nanoparticles and developed composite systems for therapeutics delivery, adapting, and improving magnetic properties, shell-core designs, and particle size and nanosystems characteristics. This review presents the most recent studies that have been presented with different nanoparticle types and structures for bone and dental drug delivery.

Influence of Concentration Levels of β-Tricalcium Phosphate on the Physical Properties of a Dental Adhesive

Our study assessed the influence of integrating 5% and 10% tricalcium phosphate (β-TCP-Ca₃(PO₄)₂.) nanoparticles into a dental adhesive on the adhesive’s bonding. To evaluate the filler nanoparticles, scanning electron microscopy (SEM), Energy Dispersive X-Ray (EDX) spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, and micro-Raman spectroscopy techniques were used. Shear Bond strength (SBS) testing, degree of conversion (DC) analysis, investigation of the adhesive–dentin interface, and biofilm experiments were conducted. The SEM micrographs revealed non-uniform agglomerates, while the EDX demonstrated the existence of oxygen ‘O’ (24.2%), phosphorus ‘P’ (17.4%) and calcium ‘Ca’ (60.1%) in the β-TCP nanoparticles. The FTIR and micro-Raman spectra indicated characteristic bands for β-TCP containing materials. The 10 wt.% β-TCP adhesive presented the highest SBS values (NTC-10 wt.% β-TCP: 33.55 ± 3.73 MPa, TC-10 wt.% β-TCP: 30.50 ± 3.25 MPa), followed by the 5 wt.% β-TCP adhesive (NTC-5 wt.% β-TCP: 32.37 ± 3.10 MPa, TC-5 wt.% β-TCP: 27.75 ± 3.15 MPa). Most of the detected failures after bond strength testing were adhesive in nature. The β-TCP adhesives demonstrated suitable dentin interaction by forming a hybrid layer (with few or no gaps) and resin tags. The β-TCP adhesives (10 wt.%) revealed lower DC values compared to control. The incorporation of 5 and 10 wt.% concentrations of β-TCP particles resulted in an increase in SBS values. A linear decline in DC values was witnessed when the nanoparticle concentration was increased. Further research focusing on exploring the influence of higher filler concentrations on adhesive’s properties is recommended.

Effectiveness of Nanoparticle-Based Acidulated Phosphate Fluoride (APF) Gel on Surface Enamel Fluoride Uptake: an Interventional Study

Statement of the Problem

Despite topical fluoride being used for over 50 years in caries prevention, its complete potential in terms of formation of fluorapatite enamel and prolonged surface retention has not been harnessed.

Purpose

This study aimed to assess the effectiveness of nanoparticle based acidulated phosphate fluoride (APF) gel on surface enamel fluoride uptake through split mouth design over a period of six months, on patients undergoing orthodontic treatment and indicated for bilateral extraction of premolars on at least one of the arch.

Materials and Method

A split mouth non randomized clinical trial was performed. Each of the 30 participants received one application of 4 minutes duration of both the intervention: Right half of the mouth received nanoparticle based APF gel, and left half of the mouth received conventional APF gel (16 Oz Pascal Corp.; strawberry flavor). Bilateral acid etch biopsy of enamel surface was take at 3 intervals- baseline,24 hours and 30 days. Using 1ml of 0.5M perchloric acid, acid etch enamel biopsy was taken for all the study subjects at 3 intervals of time (baseline, 24 hours and 30 days), bilaterally on the buccal and palatal/lingual surface of maxillary or mandibular premolars indicated for extraction, using 1 (l of 0.5M perchloric acid. After the premolars were extracted, scanning electron microscope (SEM) analysis was done to determine the surface characteristics of enamel in both groups.

Results

Overall, both fluoride uptake and depth of biopsy remained significant even after controlling for the covariates (time, group) individually and simultaneously (p< 0.05). Further analysis showed that fluoride uptake was significantly increased and biopsy depth significantly decreased in the nanoparticle based APF gel group at 24 hour and 30 day evaluation respectively.

Conclusion

By reducing the size of sodium fluoride to increase the surface enamel uptake, our results support the use of this top down approach as a promising strategy for effective delivery of topical fluorides. This highlights that the top down approach of nanoscience to reduce the size active compound sodium fluoride has increased the uptake and retention of surface enamel fluoride.

Nanostructures as Targeted Therapeutics for Combating Oral Bacterial Diseases

Pathogenic oral biofilms are now recognized as a key virulence factor in many microorganisms that cause the heavy burden of oral infectious diseases. Recently, new investigations in the nanotechnology field have propelled the development of novel biomaterials and approaches to control bacterial biofilms, either independently or in combination with other substances such as drugs, bioactive molecules, and photosensitizers used in antimicrobial photodynamic therapy (aPDT) to target different cells. Moreover, nanoparticles (NPs) showed some interesting capacity to reverse microbial dysbiosis, which is a major problem in oral biofilm formation. This review provides a perspective on oral bacterial biofilms targeted with NP-mediated treatment approaches. The first section aims to investigate the effect of NPs targeting oral bacterial biofilms. The second part of this review focuses on the application of NPs in aPDT and drug delivery systems.

Effect of bioactive glasses containing strontium and potassium on dentin permeability

Dentin hypersensitivity (DH) is characterized by pain caused by an external stimulus on exposed dentin. Different therapeutic approaches have been proposed to mitigate this problem; however, none of them provide permanent pain relief. In this study, we synthesized and characterized experimental bioactive glasses containing 3.07 mol% SrO or 3.36 mol% K₂ O (both equivalent to 5 wt% in the glass), and evaluated their effect on dentin permeability to verify their potential to treat DH. The experimental materials were characterized by field-emission scanning electron microscopy, Fourier transform infrared spectroscopy, micro-Raman spectroscopy, and X-ray diffraction to confirm the respective structures and chemical compositions. The reduction in the hydraulic conductance of dentin was evaluated at the three stages: minimum permeability; maximum permeability (24% ethylenediaminetetraacetic acid [EDTA] treatment); and final dentin permeability after treatment with the bioactive glasses. They all promoted a reduction in dentin permeability, with a significant difference for each sample and posttreatment group. Also, a significant reduction in dentin permeability was observed even after a simulated toothbrushing test, demonstrating effective action of these materials against DH. Besides, incorporating 3.07 mol% SrO was a positive factor. Therefore, strontium's desensitizing and re-mineralizing properties can be further exploited in bioactive glasses to promote a synergistic effect to treat DH.

Assessment of Bond Integrity, Durability, and Degree of Conversion of a Calcium Fluoride Reinforced Dentin Adhesive

Our study aimed to synthesize and compare the mechanical properties and dentin interaction of two adhesives; experimental adhesive (EA) and EA containing 5 wt.% calcium fluoride (CaF₂) nano-crystals (CaF₂ adhesive-CAFA). CaF₂ nano-crystals were synthesized by reacting two solutions (containing calcium and fluoride) in a glass chamber using a heated air system. The EA was produced using a mix of monomers, photo-initiators, camphorquinone, and electron initiators. The synthesized CaF₂ nano-crystals were centrifuged to guarantee that inside the adhesive there is homogenized dispersion of the filler particles. Their integration in the EA yielded two groups; Gp-1: EA (without CaF₂, control) and Gp-2: (5 wt.% CaF₂ containing adhesive, CAFA). Sixty teeth were prepared and set to form bonded specimens using the two adhesives. The CaF₂ nano-crystals were irregularly shaped with an average particle size of 30–200 nm. The highest μTBS values were obtained for CAFA-non-thermocycled (NTC) samples (32.63 ± 3.15), followed by EA-NTC (31.80 ± 3.75) specimens. On thermocycling (TC), both adhesive groups presented lower μTBS values (CAFA-TC: 29.47 ± 3.33 and EA-TC: 24.04 ± 3.69). Hybrid layer (HL) formation and resin tags of varying depths were perceived for both adhesive groups. The EDX analysis demonstrated the presence of carbon (C), silica (Si), calcium (Ca), and fluoride (F) for CAFA group. Micro-Raman spectroscopy revealed distinct peaks for CaF₂ nano-crystals. The CAFA group presented the greatest DC. The addition of CaF₂ nano-crystals in the adhesive caused improved bond μTBS and DC. The incorporation also demonstrated suitable dentin interaction, depicted by appropriate HL and resin tag development.

Synergistic Effect of Bioactive Inorganic Fillers in Enhancing Properties of Dentin Adhesives-A Review

Dentin adhesives (DAs) play a critical role in the clinical success of dental resin composite (DRC) restorations. A strong bond between the adhesive and dentin improves the longevity of the restoration, but it is strongly dependent on the various properties of DAs. The current review was aimed at summarizing the information present in the literature regarding the improvement of the properties of DAs noticed after the addition of bioactive inorganic fillers. From our search, we were able to find evidence of multiple bioactive inorganic fillers (bioactive glass, hydroxyapatite, amorphous calcium phosphate, graphene oxide, calcium chloride, zinc chloride, silica, and niobium pentoxide) in the literature that have been used to improve the different properties of DAs. These improvements can be seen in the form of improved hardness, higher modulus of elasticity, enhanced bond, flexural, and ultimate tensile strength, improved fracture toughness, reduced nanoleakage, remineralization of the adhesive-dentin interface, improved resin tag formation, greater radiopacity, antibacterial effect, and improved DC (observed for some fillers). Most of the studies dealing with the subject area are in vitro. Future in situ and in vivo studies are recommended to positively attest to the results of laboratory findings.

Recent Advances in the Development of Antimicrobial and Antifouling Biocompatible Materials for Dental Applications

The risk of secondary bacterial infections resulting from dental procedures has driven the design of antimicrobial and antifouling dental materials to curb pathogenic microbial growth, biofilm formation and subsequent oral and dental diseases. Studies have investigated approaches based primarily on contact-killing or release-killing materials. These materials are designed for addition into dental resins, adhesives and fillings or as immobilized coatings on tooth surfaces, titanium implants and dental prosthetics. This review discusses the recent developments in the different classes of biomaterials for antimicrobial and antifouling dental applications: polymeric drug-releasing materials, polymeric and metallic nanoparticles, polymeric biocides and antimicrobial peptides. With modifications to improve cytotoxicity and mechanical properties, contact-killing and anti-adhesion materials show potential for incorporation into dental materials for long-term clinical use as opposed to short-lived antimicrobial release-based coatings. However, extended durations of biocompatibility testing, and adjustment of essential biomaterial features to enhance material longevity in the oral cavity require further investigations to confirm suitability and safety of these materials in the clinical setting. The continuous exposure of dental restorative and regenerative materials to pathogenic microbes necessitates the implementation of antimicrobial and antifouling materials to either replace antibiotics or improve its rational use, especially in the day and age of the ever-increasing problem of antimicrobial resistance.

Effectiveness of Nanohydroxyapatite on Demineralization of Enamel and Cementum Surrounding Margin of Yttria-Stabilized Zirconia Polycrystalline Ceramic Restoration

Introduction

Prosthetic dentistry has shifted toward prevention of caries occurrence surrounding restorative margin through the anti-demineralization process. This study examines the ability of nanohydroxyapatite (NHA) gel and Clinpro (CP) on enhancing resistance to demineralization of enamel and cementum at margin of restoration.

Materials and Methods

Thirty extracted mandibular third molars were segregated at 1 mm above and below cementoenamel junction (CEJ) to separate CEJ portions and substituted with zirconia disks by bonding to crown and root portions with resin adhesive. The enamel and cementum area of 4 × 4 mm² neighboring zirconia was applied with either NHA or CP, while one group was left no treatment (NT) before demineralized with carbopal. Vickers hardness (VHN) of enamel and cementum was evaluated before material application (B_M), after material application (A_M), and after demineralization (A_D). Analysis of variance (ANOVA) and post hoc multiple comparisons were used to justify for the significant difference (α = 0.05). Scanning electron microscopy (SEM) and X-ray diffraction (XRD) were determined for surface evaluations.

Results

The mean ± SD of VHN for B_M, A_M, and A_D for enamel and cementum was 393.24 ± 26.27, 392.89 ± 17.22, 155.00 ± 5.68 and 69.89 ± 4.59, 66.28 ± 3.61, 18.13 ± 0.54 for NT groups, respectively, 390.10 ± 17.69, 406.77 ± 12.86, 181.55 ± 7.99 and 56.01 ± 9.26, 62.71 ± 6.15, 19.09 ± 1.16 for NHA groups, respectively, and 387.90 ± 18.07, 405.91 ± 9.83, 188.95 ± 7.43 and 54.68 ± 7.30, 61.81 ± 4.30, 19.22 ± 1.25 for CP groups, respectively. ANOVA indicated a significant increase in anti-demineralization of enamel and cementum upon application of NHA or CP (p < 0.05). Multiple comparisons indicated the capability in inducing surface strengthening to resist demineralization for enamel and cementum of NHA which was comparable to CP (p > 0.05) as evidenced by SEM and XRD data indicating NHA and CP deposition and crystallinity accumulation.

Conclusion

NHA and CP were capable of enhancing anti-demineralization for enamel and cementum. The capability in resisting the demineralization process of NHA was comparable with CP. NHA was highly recommended for anti-demineralization for enamel and cementum surrounding restorative margin.

Engineering Polymeric Nanosystems against Oral Diseases

Nanotechnology and nanoparticles (NPs) are at the forefront of modern research, particularly in the case of healthcare therapeutic applications. Polymeric NPs, specifically, hold high promise for these purposes, including towards oral diseases. Careful optimisation of the production of polymeric NPs, however, is required to generate a product which can be easily translated from a laboratory environment to the actual clinical usage. Indeed, considerations such as biocompatibility, biodistribution, and biodegradability are paramount. Moreover, a pre-clinical assessment in adequate in vitro, ex vivo or in vivo model is also required. Last but not least, considerations for the scale-up are also important, together with an appropriate clinical testing pathway. This review aims to eviscerate the above topics, sourcing at examples from the recent literature to put in context the current most burdening oral diseases and the most promising polymeric NPs which would be suitable against them.

Application of propolis extract, nanovitamin C and nanovitamin E to prevent alveolar osteitis after impacted lower third molar surgery. A randomized, double-blind, split-mouth, pilot study

BACKGROUND

Propolis has anti-inflammatory, analgesic and healing properties. The purpose of this study was to determine whether a gel containing 2% of propolis extract, 0.2% of ascorbic acid and 0.2% of tocopherol acetate is effective in preventing surgical complications related to impacted lower third molar extractions.

MATERIAL AND METHODS

A randomized, double-blind, split-mouth study was performed. Fifteen patients were recruited who needed bilateral impacted lower third molar extractions with a similar surgical difficulty. A test or placebo gel was administered randomly inside post-extraction sockets. Each patient was instructed to apply the gel 3 times/day in the surgical wound for a week. After a month, the contralateral third molar was extracted, and the opposite gel applied. The following parameters were diagnosed/evaluated and then recorded: alveolar osteitis following Blum's criteria, swelling and trismus at day one, two, three and seven post-intervention, wound healing at day 7 post-intervention, and postoperative pain using a visual analog scale, as well as, the number of analgesic pill intake.

RESULTS

A total of twenty-six surgical procedures were performed in 13 patients (mean age 20.67±2 years). Alveolar osteitis was reported in 3 patients from the placebo group (23.1%) and none in the test group (0%) (p=0.25). No statistically significant differences were reported in swelling, trismus, wound healing or analgesic pill consumption between two groups. But statistically lower postoperative pain during the 7 days after surgical extractions was found according to visual analog scale in test group compared to the placebo group (p=0.007). No side effects were reported.

CONCLUSIONS

The application of this gel may be effective in preventing alveolitis and thus reducing postoperative pain after impacted third molar extractions. More randomized clinical trials with larger sample are needed to confirm these results.

Polymeric zinc-doped nanoparticles for high performance in restorative dentistry

OBJECTIVES

The aim was to state the different applications and the effectiveness of polymeric zinc-doped nanoparticles to achieve dentin remineralization.

DATA, SOURCES AND STUDY SELECTION

Literature search was conducted using electronic databases, such as PubMed, MEDLINE, DIMDI, Embase, Scopus and Web of Science. A narrative exploratory review was undertaken.

CONCLUSIONS

Polymeric nanospheres (NPs) were efficiently loaded with zinc. NPs sequestered calcium and phosphate in the presence of silicon, and remained effectively embedded at the hybrid layer. NPs incorporation did not alter bond strength and inhibited MMP-mediated dentin collagen degradation. Zn-loaded NPs remineralized the hybrid layer inducing a generalized low-carbonate substitute apatite precipitation, chemically crystalline with some amorphous components, and an increase in mechanical properties was also promoted. Viscoelastic analysis determined that dentin infiltrated with Zn-NPs released the stress by breaking the resin-dentin interface and creating specific mineral formations in response to the energy dissipation. Bacteria were scarcely encountered at the resin-dentin interface. The combined antibacterial and remineralizing effects, when Zn-NPs were applied, reduced biofilm formation. Zn-NPs application at both cervical and radicular dentin attained the lowest microleakage and also promoted durable sealing ability. The new zinc-based salt minerals generated covered the dentin surface totally occluding cracks, porosities and dentinal tubules.

CLINICAL SIGNIFICANCE

Zinc-doped NPs are proposed for effective dentin remineralization and tubular occlusion. This offers new strategies for regeneration of eroded cervical dentin, effective treatment of dentin hypersensitivity and in endodontically treated teeth previous to the canal filling. Zn-NPs also do reduce biofilm formation due to antibacterial properties.

Relevance of Biofilm Models in Periodontal Research: From Static to Dynamic Systems

Microbial biofilm modeling has improved in sophistication and scope, although only a limited number of standardized protocols are available. This review presents an example of a biofilm model, along with its evolution and application in studying periodontal and peri-implant diseases. In 2011, the ETEP (Etiology and Therapy of Periodontal and Peri-Implant Diseases) research group at the University Complutense of Madrid developed an in vitro biofilm static model using representative bacteria from the subgingival microbiota, demonstrating a pattern of bacterial colonization and maturation similar to in vivo subgingival biofilms. When the model and its methodology were standardized, the ETEP research group employed the validated in vitro biofilm model for testing in different applications. The evolution of this model is described in this manuscript, from the mere observation of biofilm growth and maturation on static models on hydroxyapatite or titanium discs, to the evaluation of the impact of dental implant surface composition and micro-structure using the dynamic biofilm model. This evolution was based on reproducing the ideal microenvironmental conditions for bacterial growth within a bioreactor and reaching the target surfaces using the fluid dynamics mimicking the salivary flow. The development of this relevant biofilm model has become a powerful tool to study the essential processes that regulate the formation and maturation of these important microbial communities, as well as their behavior when exposed to different antimicrobial compounds.

Analysis of laboratory adhesion studies in eroded enamel and dentin: a scoping review

Aim

To summarize and report laboratory studies of adhesion in eroded substrates, which used bond strength as an outcome measure. To determine the strategies available to overcome bonding difficulties, the quality and consistency of the methodology and to find evidence gaps.

Materials and Methods

The present review followed PRISMA-ScR guidelines. A search was conducted on PubMed/Medline, Scopus and EMBASE (Ovid) databases to identify published peer-reviewed papers (2010–2020). For final qualitative synthesis, 29 articles were selected which respected the inclusion criteria. Data charting was carried out, independently, by two reviewers and quality assessment of the articles was performed.

Results

The primary studies included fall into four major categories: comparison of restorative materials and application modes, enzymatic inhibitors, surface pretreatments or remineralization strategies. Most studies found evaluated dentin (76%), while 17% evaluated enamel, and 7% evaluated both substrates. The majority of the studies reported an effective intervention (83%). Bond strength to eroded dentin is significantly reduced, while in enamel erosion is beneficial. The bond strength to eroded dentin is material-dependent and favored in systems containing 10-MDP. Great disparities among the erosion models used were found, with citric acid in different concentrations being the preferred method, although standardization is lacking.

Conclusions

Adhesives containing 10-MDP show beneficial results in eroded dentin, and surface preparation methods should be considered. Studies which evaluated adhesion to eroded enamel/dentin show high heterogeneity in what concerns aims and methodology. Strategies that focus on remineralizing dentin and strategies to protect bond longevity in this substrate require further research.

Nanomaterials Application in Orthodontics

Nanotechnology has gained importance in recent years due to its ability to enhance material properties, including antimicrobial characteristics. Nanotechnology is applicable in various aspects of orthodontics. This scientific work focuses on the concept of nanotechnology and its applications in the field of orthodontics, including, among others, enhancement of antimicrobial characteristics of orthodontic resins, leading to reduction of enamel demineralization or control of friction force during orthodontic movement. The latter one enables effective orthodontic treatment while using less force. Emphasis is put on antimicrobial and mechanical characteristics of nanomaterials during orthodontic treatment. The manuscript sums up the current knowledge about nanomaterials' influence on orthodontic appliances.

Synthesis and characterization of graphene oxide-zirconia (GO-ZrO2) and hydroxyapatite-zirconia (HA-ZrO2) nano-fillers for resin-based composites for load-bearing applications

OBJECTIVES

The study aims to synthesize two different types of nano-fillers based on zirconia (ZrO₂), which was functionalized with graphene oxide (GO-ZrO₂), and hydroxyapatite (HA-ZrO₂), and to implement them in an experimental methacrylate matrix containing new dimethacrylic oligomers.

METHODS

Nano-particles were synthesized via a modified Hummer's method and a sol-gel route. Bisphenol A-glycidyl methacrylate oligomers (Bis-GMA_336[0-1]) were synthesized from an epoxy resin that reacted with methacrylic acid in the presence of a basic catalyst. Traditional dental glass-fillers (Barium oxide/BaO and Barium fluoride/BaF₂) were synthesized to create an experimental resin-based composite (RBC) used as reference. Filler morphology was evaluated via Transmission Electron Microscopy. RBCs were characterised by real-time Fourier transform infrared spectroscopy (degree of cure/DC, polymerisation kinetics), real-time spectrometry (light transmittance), 3-point bending test (flexural strength and modulus, Weibull parameters), and depth-sensing indentation test (plastic and elastic deformation parameters).

RESULTS

The synthesized nanohybrid fillers proved good dispersing performance. Mechanical properties and materials' reliability are within or above the mean values reported in the literature for RBCs. Addition of HA-ZrO₂-fillers resulted in a decrease light transmission, DC and mechanical properties. Except for the HA-ZrO₂ RBC, materials showed a high resistance to softening in solvent.

CONCLUSIONS

The synthesis of GO-ZrO₂ and HA-ZrO₂ nanohybrid particles and their implementation in experimental RBCs has proven successful. Adjustments of the light transmission through suitable co-fillers in addition to GO-ZrO₂ as well as adjustments of the amount of HA-ZrO₂ are necessary to enable reduced curing time (<20 s).

CLINICAL SIGNIFICANCE

The addition of nanofillers with tailor-made properties can help improving the performance of modern restoratives.

Using Laser-Doppler Flowmetry to Evaluate the Therapeutic Response in Dentin Hypersensitivity

Dentin hypersensitivity (DH) is a common medical condition with underreported prevalence and it is difficult to quantify. This study aimed to investigate whether assessing dental pulp vascular micro-dynamics by laser-Doppler flowmetry (LDF) would be functional for therapeutic evaluation, in contrast to a verbal rating scale (VRS). A split-mouth single-blind randomized study was conducted on seven patients and a total of 36 teeth. Two DH therapeutic methods were employed: (i) fluoride gel; (ii) Nd:YAG radiation combined with fluoride gel. For each tooth, five consecutive LDF determinations of pulp blood flow were made (before and immediately after desensitizing treatment, then after 24 h, 7 days, and 1 month), and the VRS was applied each time. Spearman’s correlation was applied for concurrent validation. Two-way (treatment and patient) repeated measures ANOVA full factorial was applied, followed by Tukey’s post-hoc comparisons and Pillai’s trace multivariate statistic. While VRS scores had moderate reliability, LDF could objectively estimate treatment effects. Based on partial eta-squared values, treatment and patient characteristics were estimated to explain about 84% and 50% of the variability, respectively. In conclusion, LDF is an objective technique that can quantitatively assess DH evolution, and it is effective in reliably monitoring oral health therapeutic interventions.

Prospects of nanodentistry for the diagnosis and treatment of maxillofacial pathologies and cancers

Despite the commendable milestones achieved in molecular maxillofacial pathology in the last decade, there remains a paucity of utilization of ancillary nanomolecular tools that complement the omics-based approaches. As the advent of omics science transforms our understanding of tumour biology from a phenomenological to a complex network (systems-oriented) paradigm, several ancillary tools have emerged to improve the scope of individualized medicine. Targeted nano drug delivery systems have significantly reduced toxicity of chemotherapeutic agents in a precise manner. Many conventional cancer therapies are limited in efficacy and this has led to the emergence of nanomedical innovations. Despite the success of nanomedicine, a major challenge that persists is tumour heterogeneity and biological complexity. A good understanding of the interaction between inorganic nanoparticles and the biological systems has led to the development of better tools for individualized medicine. Tools such as the composite organic-inorganic nanoparticles (COINs) and the quantum dots (QD) have significantly improved the identification and quantification of disease biomarkers, histopathological detection methods, as well as improving the clinical translation and utility of these nanomaterials. Nanomedicine has lent credence to several multipronged theranostic applications in medicine, and this has improved the medical practice tremendously. Despite the palpable influence of nanomedicine on the delivery of individualized medical therapies, the term "nanodentistry" remains in the background without much hype, albeit some progress has been made in this area. Hence, this review discusses the potential and challenges of nanodentistry in the diagnosis and treatment of maxillofacial pathologies, particularly cancer in resource-limited settings.

Effect of Fiber Posts on Stress Distribution of Endodontically Treated Upper Premolars: Finite Element Analysis

By means of a finite element method (FEM), the present study evaluated the effect of fiber post (FP) placement on the stress distribution occurring in endodontically treated upper first premolars (UFPs) with mesial–occlusal–distal (MOD) nanohybrid composite restorations under subcritical static load. FEM models were created to simulate four different clinical situations involving endodontically treated UFPs with MOD cavities restored with one of the following: composite resin; composite and one FP in the palatal root; composite and one FP in the buccal root; or composite and two FPs. As control, the model of an intact UFP was included. A simulated load of 150 N was applied. Stress distribution was observed on each model surface, on the mid buccal–palatal plane, and on two horizontal planes (at cervical and root-furcation levels); the maximum Von Mises stress values were calculated. All analyses were replicated three times, using the mechanical parameters from three different nanohybrid resin composite restorative materials. In the presence of FPs, the maximum stress values recorded on dentin (in cervical and root-furcation areas) appeared slightly reduced, compared to the endodontically treated tooth restored with no post; in the same areas, the overall Von Mises maps revealed more favorable stress distributions. FPs in maxillary premolars with MOD cavities can lead to a positive redistribution of potentially dangerous stress concentrations away from the cervical and the root-furcation dentin.

Prospects on Nano-Based Platforms for Antimicrobial Photodynamic Therapy Against Oral Biofilms

Objective: This review clusters the growing field of nano-based platforms for antimicrobial photodynamic therapy (aPDT) targeting pathogenic oral biofilms and increase interactions between dental researchers and investigators in many related fields. Background data: Clinically relevant disinfection of dental tissues is difficult to achieve with aPDT alone. It has been found that limited penetrability into soft and hard dental tissues, diffusion of the photosensitizers, and the small light absorption coefficient are contributing factors. As a result, the effectiveness of aPDT is reduced in vivo applications. To overcome limitations, nanotechnology has been implied to enhance the penetration and delivery of photosensitizers to target microorganisms and increase the bactericidal effect. Materials and methods: The current literature was screened for the various platforms composed of photosensitizers functionalized with nanoparticles and their enhanced performance against oral pathogenic biofilms. Results: The evidence-based findings from the up-to-date literature were promising to control the onset and the progression of dental biofilm-triggered diseases such as dental caries, endodontic infections, and periodontal diseases. The antimicrobial effects of aPDT with nano-based platforms on oral bacterial disinfection will help to advance the design of combination strategies that increase the rate of complete and durable clinical response in oral infections. Conclusions: There is enthusiasm about the potential of nano-based platforms to treat currently out of the reach pathogenic oral biofilms. Much of the potential exists because these nano-based platforms use unique mechanisms of action that allow us to overcome the challenging of intra-oral and hard-tissue disinfection.

Fabrication and characterization of remineralizing dental composites containing hydroxyapatite nanoparticles

The aim of this study was to fabricate and characterize dental composites containing hydroxyapatite nanoparticles (HApNPs). Four dental composites were produced from the same organic matrix (70 wt% Bis-GMA and 30 wt% TEGDMA), with partial replacement of BaBSi particles (65 wt%) by HApNPs in the following concentrations (wt%): E0 (0) - control, E10 (10), E20 (20) and E30 (30). Ca²⁺ and PO₄^3- release was evaluated in solutions with different pHs (4, 5.5, and 7) using atomic emission spectroscopy with microwave-induced nitrogen plasma while the enamel remineralization potential was evaluated in caries-like enamel lesions induced by S. mutans biofilm using micro-CT. The following properties were characterized: degree of conversion (DC%), microhardness (KHN), flexural strength (FS), elastic modulus (EM) and translucency (TP). The higher the HApNPs content, the higher the Ca²⁺ and PO₄^3- release. The ions release was influenced by pH (4 > 5.5 > 7) (p < 0.05). All composites loaded with HApNPs were able to remineralize the enamel (E30 = E20 > E10) (p < 0.05). Contrarily, E0 was not able of recovering the enamel mineral loss. E0 and E10 presented highest DC%, while E20 and E30 showed similar and lowest DC%. KHN and FS were decreased with the addition of HApNPs, while EM was not influenced by the incorporation of HApNPs. E10 presented statistically similar TP to E0, while this property decreased for E20 and E30 (p < 0.05). Incorporation of HApNPs into dental composites promoted enamel remineralization, mainly at potentially cariogenic pH (= 4), while maintained their overall performance in terms of physicomechanical properties.

Rapid Release Polymeric Fibers for Inhibition of Porphyromonas gingivalis Adherence to Streptococcus gordonii

Active agents targeting key bacterial interactions that initiate biofilm formation in the oral cavity, may alter periodontitis progression; however, to date, specifically-targeted prophylactic and treatment strategies have been limited. Previously we developed a peptide, BAR (SspB Adherence Region), that inhibits oral P. gingivalis/S. gordonii biofilm formation in vitro and in vivo, and BAR nanoparticles that increase BAR effectiveness via multivalency and prolonged delivery. However, limited BAR loading and nanoparticle retention in the oral cavity can result in inadequate release and efficaciousness. Given this, an effective delivery platform that can release concentrations of BAR suitable for twice-daily applications, may offer an alternative that enhances loading, ease of administration, and retention in the oral cavity. With this in mind, the study objectives were to develop and characterize a rapid-release platform, composed of polymeric electrospun fibers (EFs) that encapsulate BAR, and to evaluate fiber safety and functionality against P. gingivalis/S. gordonii biofilms in vitro. Poly(lactic-co-glycolic acid) (PLGA), poly(L-lactic acid) (PLLA), and polycaprolactone (PCL) were electrospun alone or blended with polyethylene oxide (PEO), to provide high BAR loading and rapid-release. The most promising formulation, 10:90 PLGA:PEO EFs, provided 95% BAR release after 4 h, dose-dependent inhibition of biofilm formation (IC50 = 1.3 μM), disruption of established dual-species biofilms (IC50 = 2 μM), and maintained high cell viability. These results suggest that BAR-incorporated EFs may provide a safe and specifically-targeted rapid-release platform to inhibit and disrupt dual-species biofilms, that we envision may be applied twice-daily to exert prophylactic effect in the oral cavity.

Role of Nanotechnology in Dentistry: Systematic Review

Aim:

This systematic review aimed to provide an overview of role of nanotechnology in dentistry and to evaluate its applicability in prevention and treatment of oral diseases.

Materials and Methods:

A systematic literature search was conducted in 2 electronic databases – PMC and Cochrane. The search was restricted to the articles published during the last 5 years. First-level screening was done to select articles for the review on the basis of title and abstract. Then, full texts of selected articles were studied, and relevant articles were selected to be included in this review. Articles selected were critically appraised to evaluate their quality.

Results:

Literature search revealed 837 articles in PMC, 15 in Clinical trial register of US National library, and 43 in Cochrane. Additional 6 articles were identified by hand search. Eleven clinical trials were included in this review.

Conclusion:

Advancement in nanotechnology has greatly influenced dental disease prevention and therapy significantly.

Remineralization, Regeneration, and Repair of Natural Tooth Structure: Influences on the Future of Restorative Dentistry Practice

Currently, the principal strategy for the treatment of carious defects involves cavity preparations followed by the restoration of natural tooth structure with a synthetic material of inferior biomechanical and esthetic qualities and with questionable long-term clinical reliability of the interfacial bonds. Consequently, prevention and minimally invasive dentistry are considered basic approaches for the preservation of sound tooth structure. Moreover, conventional periodontal therapies do not always ensure predictable outcomes or completely restore the integrity of the periodontal ligament complex that has been lost due to periodontitis. Much effort and comprehensive research have been undertaken to mimic the natural development and biomineralization of teeth to regenerate and repair natural hard dental tissues and restore the integrity of the periodontium. Regeneration of the dentin-pulp tissue has faced several challenges, starting with the basic concerns of clinical applicability. Recent technologies and multidisciplinary approaches in tissue engineering and nanotechnology, as well as the use of modern strategies for stem cell recruitment, synthesis of effective biodegradable scaffolds, molecular signaling, gene therapy, and 3D bioprinting, have resulted in impressive outcomes that may revolutionize the practice of restorative dentistry. This Review covers the current approaches and technologies for remineralization, regeneration, and repair of natural tooth structure.

Oroactive dental biomaterials and their use in endodontic therapy

Dental biomaterials have revolutionized modern therapies. Untreated dental caries remains the major etiological factor for endodontic treatment, and together with a decreasing rate of tooth loss escalates the importance of continuously improving the materials used for endodontic therapies. Endodontic biomaterials are used for vital pulp therapies, irrigation, intracanal medicaments, obturation and regenerative procedures. These materials offer several functions including: antimicrobial activity, mechanical reinforcement, aesthetics, and therapeutic effects. Vital pulp therapies have seen an improvement in clinical results with an incremental approach to build on the strengths of past materials such as calcium hydroxide and calcium silicates. While sodium hypochlorite remains the gold standard for canal irrigation, numerous nanoparticle formulations have been developed to promote sustained antimicrobial action. Gutta-percha based bulk fillers remain the most common materials for root filling. However, while multiple studies focus on the development of novel formulations containing drugs, glass derivatives or ionic-, polymeric-, or drug- loaded nanoparticles, a lack of reliable and long-term clinical evidence obligates further study as experienced clinicians prefer to use what has worked for decades. This review delves in to the biochemistry of the materials to scrutinize their shortcomings, and where opportunity lies to further enhance their efficacy in endodontic practice. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 108B:201-212, 2020.

Gold quantum dots impair the tumorigenic potential of glioma stem-like cells via β-catenin downregulation in vitro

BACKGROUND

Over the past several decades, the incidence of solid cancers has rapidly increased worldwide. Successful removal of tumor-initiating cells within tumors is essential in the field of cancer therapeutics to improve patient disease-free survival rates. The biocompatible multivarient-sized gold nanoparticles (MVS-GNPs) from quantum dots (QDs, <10 nm) to nanosized (up to 50 nm) particles have vast applications in various biomedical areas including cancer treatment. The role of MVS-GNPs for inhibition of tumorigenic potential and stemness of glioma was investigated in this study.

METHODS

Herein, MVS-GNPs synthesized and characterized by means of X-ray diffraction pattern (XRD) and transmission electron microscopy (TEM) techniques. Afterwards, interaction of these GNPs with glioma stem-cell like cells along with cancer cells were evaluated by MTT, cell motility, self-renewal assays and biostatistics was also applied.

RESULTS

Among these GNPs, G-QDs contributed to reduce metastatic events and spheroid cell growth, potentially blocking the self-renewal ability of these cells. This study also uncovers the previously unknown role of the inhibition of CTNNB1 signaling as a novel candidate to decrease the tumorigenesis of glioma spheroids and subsequent spheroid growth. The accurate and precise biostatistics results were obtained at quantify level.

CONCLUSION

In summary, G-QDs may exhibit possible contribution on suppressing the growth of tumor-initiating cells. These data reveal a unique therapeutic approach for the elimination of residual resistant stem-like cells during cancer treatment.

Antibacterial effects of polymeric PolymP-n Active nanoparticles. An in vitro biofilm study

OBJECTIVE

to study the antibacterial effect of polymeric PolymP-n Active nanoparticles using an in vitro subgingival biofilm model.

METHODS

Hydroxyapatite discs coated with five modalities of nanoparticles (NPs): NPs, NPs doped with zinc, calcium, silver and doxycycline, PBS as control, and Streptococcus oralis, Actinomyces naeslundii, Veillonella parvula, Fusobacterium nucleatum, Porphyromonas gingivalis and Aggregatibacter actinomycetemcomitans were studied in a static in vitro biofilm model (12, 24, 48, and 72h). Nano-roughness of the different disc surfaces (SRa, in nm) and morphological characteristic of the biofilms (thickness (μm) and bacterial viability) were studied by different microscopy modalities. Quantitative Polymerase Chain Reaction was used to assess the effect of the nanoparticles on the bacterial load (colony forming unit per milliliter) (CFUmL^-1). Analysis of variance and post-hoc testing with T3 Dunnett́s, and Student Newman Keuls correction was used. Results were considered statistically significant at p<0.05.

RESULTS

Surfaces containing the different nanoparticles showed significant increments in roughness when compared to controls (p<0.05). A similar biofilm formation and dynamics was observed, although reductions in bacterial viability were detected in biofilms in contact with the different nanoparticles, more pronounced with silver and doxycycline NPs. Doxycycline-NPs biofilms resulted in unstructured biofilm formation and significantly lower number of the six species when compared with the other nanoparticles specimens and controls (p<0.001 in all cases).

SIGNIFICANCE

Polymeric PolymP-n Active nanoparticles when combined with silver and doxycycline showed a significant antibacterial effect when tested in an in vitro subgingival biofilm model.

Nanotechnology in dentistry: Unleashing the hidden gems

Nanotechnology in dentistry refers to new generation research carried out to develop newer technologies, restorative materials and drugs of Nano dimensions. The word “Nano” refers to Nanoscale particles. Although the science of nanotechnology in dentistry is recent and less developed, but still has vast potential to show advancement and improvement in the field of dentistry. As nanotechnology is making firm grip in other fields such as drug delivery system and reducing toxicity by the emergence of more biocompatible materials. Clinicians, researchers, and manufacturers are taking keen interest and participation in the advancement of this field. This paper is an attempt in unleashing the hidden gems of nanotechnology-focusing latest developments in field restorative and surgical dentistry to enhance the quality and biocompatibility of newer generation dental materials and technology. This paper will also focus on potential hurdles encountered in the development of newer materials by utilizing the science of nanotechnology and their potential safety issues concern.

Use of magnetic nanoparticles as a drug delivery system to improve chlorhexidine antimicrobial activity

Nanotechnology offers new tools for developing therapies to prevent and treat oral infections, particularly biofilm-dependent disorders, such as dental plaques and endodontic and periodontal diseases. Chlorhexidine (CHX) is a well-characterized antiseptic agent used in dentistry with broad spectrum activity. However, its application is limited due to inactivation in body fluid and cytotoxicity toward human cells, particularly at high concentrations. To overcome these limitations, we synthesized nanosystems composed of aminosilane-coated magnetic nanoparticles functionalized with chlorhexidine (MNP@CHX). In the presence of human saliva, MNPs@CHX displayed significantly greater bactericidal and fungicidal activity against planktonic and biofilm-forming microorganisms than free CHX. In addition, CHX attached to MNPs has an increased ability to restrict the growth of mixed-species biofilms compared to free CHX. The observed depolarization of mitochondria in fungal cells treated with MNP@CHX suggests that induction of oxidative stress and oxidation of fungal structures may be a part of the mechanism responsible for pathogen killing. Nanoparticles functionalized by CHX did not affect host cell proliferation or their ability to release the proinflammatory cytokine, IL-8. The use of MNPs as a carrier of CHX has great potential for the development of antiseptic nanosystems.

Nanomedicine and epigenome. Possible health risks

Nanomedicine is an emerging field that combines knowledge of nanotechnology and material science with pharmaceutical and biomedical sciences, aiming to develop nanodrugs with increased efficacy and safety. Compared to conventional therapeutics, nanodrugs manifest higher stability and circulation time, reduced toxicity and improved targeted delivery. Despite the obvious benefit, the accumulation of imaging agents and nanocarriers in the body following their therapeutic or diagnostic application generates concerns about their safety for human health. Numerous toxicology studies have demonstrated that exposure to nanomaterials (NMs) might pose serious risks to humans. Epigenetic modifications, representing a non-genotoxic mechanism of toxicant-induced health effects, are becoming recognized as playing a potential causative role in the aetiology of many diseases including cancer. This review i) provides an overview of recent advances in medical applications of NMs and ii) summarizes current evidence on their possible epigenetic toxicity. To discern potential health risks of NMs, since current data are mostly based upon in vitro and animal models, a better understanding of functional relationships between NM exposure, epigenetic deregulation and phenotype is required.

Improving health-care delivery in low-resource settings with nanotechnology: Challenges in multiple dimensions

In the two decades after 1990, the rates of child and maternal mortality dropped by over 40% and 47%, respectively. Despite these improvements, which are in part due to increased access to medical technologies, profound health disparities exist. In 2015, a child born in a developing region is nearly eight times as likely to die before the age of 5 than one born in a developed region and developing regions accounted for nearly 99% of the maternal deaths. Recent developments in nanotechnology, however, have great potential to ameliorate these and other health disparities by providing new cost-effective solutions for diagnosis or treatment of a variety of medical conditions. Affordability is only one of the several challenges that will need to be met to translate new ideas into a medical product that addresses a global health need. This article aims to describe some of the other challenges that will be faced by nanotechnologists who seek to make an impact in low-resource settings across the globe.

Demineralization-remineralization dynamics in teeth and bone

Biomineralization is a dynamic, complex, lifelong process by which living organisms control precipitations of inorganic nanocrystals within organic matrices to form unique hybrid biological tissues, for example, enamel, dentin, cementum, and bone. Understanding the process of mineral deposition is important for the development of treatments for mineralization-related diseases and also for the innovation and development of scaffolds. This review provides a thorough overview of the up-to-date information on the theories describing the possible mechanisms and the factors implicated as agonists and antagonists of mineralization. Then, the role of calcium and phosphate ions in the maintenance of teeth and bone health is described. Throughout the life, teeth and bone are at risk of demineralization, with particular emphasis on teeth, due to their anatomical arrangement and location. Teeth are exposed to food, drink, and the microbiota of the mouth; therefore, they have developed a high resistance to localized demineralization that is unmatched by bone. The mechanisms by which demineralization-remineralization process occurs in both teeth and bone and the new therapies/technologies that reverse demineralization or boost remineralization are also scrupulously discussed. Technologies discussed include composites with nano- and micron-sized inorganic minerals that can mimic mechanical properties of the tooth and bone in addition to promoting more natural repair of surrounding tissues. Turning these new technologies to products and practices would improve health care worldwide.

Nanomaterials for Tissue Engineering In Dentistry

The tissue engineering (TE) of dental oral tissue is facing significant changes in clinical treatments in dentistry. TE is based on a stem cell, signaling molecule, and scaffold triad that must be known and calibrated with attention to specific sectors in dentistry. This review article shows a summary of micro- and nanomorphological characteristics of dental tissues, of stem cells available in the oral region, of signaling molecules usable in TE, and of scaffolds available to guide partial or total reconstruction of hard, soft, periodontal, and bone tissues. Some scaffoldless techniques used in TE are also presented. Then actual and future roles of nanotechnologies about TE in dentistry are presented.

Potential Role of Reversion-Inducing Cysteine-Rich Protein with Kazal Motifs (RECK) in Regulation of Matrix Metalloproteinases (MMPs) Expression in Periodontal Diseases

Periodontal diseases are characterized by pathological destruction of extracellular matrix (ECM) of periodontal tissues. Matrix metalloproteinases (MMPs) are a significant part of the degradation of ECM. However, the regulation of MMPs expression level in periodontal diseases is as yet undetermined.

RECK (reversion-inducing cysteine-rich protein with Kazal motifs), a novel membrane-anchored inhibitor of MMPs, could regulate the expressions of MMP-2, 9 and MT1-MMP as a cell surface-signaling molecule. Thus, we propose that RECK may play an important role in regulating MMPs in the ECM degradation of periodontal diseases. The RECK/MMPs signaling pathway could provide a new approach for prevention and treatment of RECK in periodontal diseases by blocking MMPs.