Treatment wetlands in decentralised approaches for linking sanitation to energy and food security

Envisioning the innovative approaches to achieve circular economy in the water and wastewater sector

Given the challenges of urbanization and rapid resource depletion, policymakers have been compelled to abandon the old sequential paradigm of "take-make-use-dispose" to a circular approach that prioritizes preservation of natural resources. The circular economy represents a sustainable management concept that focuses on reducing, recovering, reusing, and recycling waste. While significant strides have been made in implementing circular economy principles in various industries such as automotive, electronics, and construction, particular attention has been given to the water and wastewater domains due to imbalances in water resources. Here we review the global progress of circular economy adoptability in the water and wastewater domains, considering technical, environmental, economic, and social perspectives. It assesses the current state of circular economy integration in the wastewater domain worldwide and presents approaches to promote and accelerate its adoption. The study critically examines the principles of waste management, known as the 6Rs (reclaim, restore, recycle, reduce, recover, reuse), in order to formulate effective strategies for integrating circular economy practices in the water and wastewater domains. Additionally, the study provides an overview of existing research conducted on different aspects of circular economy. Finally, the study analyzes the challenges and opportunities associated with implementing circular economy principles in the water sector.

Assessment of Air Quality and Meteorological Changes Induced by Future Vegetation in Madrid

Nature-based solutions and green urban infrastructures are becoming common measures in local air quality and climate strategies. However, there is a lack of analytical frameworks to anticipate the effect of such interventions on urban meteorology and air quality at a city scale. We present a modelling methodology that relies on the weather research and forecasting model (WRF) with the building effect parameterization (BEP) and the community multiscale air quality (CMAQ) model and apply it to assess envisaged plans involving vegetation in the Madrid (Spain) region. The study, developed within the VEGGAP Life project, includes the development of two detailed vegetation scenarios making use of Madrid’s municipality tree inventory (current situation) and future vegetation-related interventions. An annual simulation was performed for both scenarios (considering constant anthropogenic emissions) to identify (i) variations in surface temperature and the reasons for such changes, and (ii) implications on air-quality standards according to EU legislation for the main pollutants (PM10, PM2.5, NO2 and O3). Our results suggest that vegetation may have significant effects on urban meteorology due to changes induced in relevant surface properties such as albedo, roughness length or emissivity. We found a net-heating effect of around +0.18 °C when trees are introduced in dry, scarcely vegetated surfaces in the city outskirts. In turn, this enhances the planetary boundary layer height (PBLH), which brings about reductions in ambient concentrations of relevant pollutants such as NO2 (in the range of 0.5–0.8 µg m−3 for the annual mean, and 2–4 µg m−3 for the 19th highest 1 h value). Conversely, planting new trees in consolidated urban areas causes a cooling effect (up to −0.15 °C as an annual mean) that may slightly increase concentration levels due to less-effective vertical mixing and wind-speed reduction caused by increased roughness. This highlights the need to combine nature-based solutions with emission-reduction measures in Madrid.

Microbial Electrochemically Assisted Treatment Wetlands: Current Flow Density as a Performance Indicator in Real-Scale Systems in Mediterranean and Northern European Locations

A METland is an innovative treatment wetland (TW) that relies on the stimulation of electroactive bacteria (EAB) to enhance the degradation of pollutants. The METland is designed in a short-circuit mode (in the absence of an external circuit) using an electroconductive bed capable of accepting electrons from the microbial metabolism of pollutants. Although METlands are proven to be highly efficient in removing organic pollutants, the study of in situ EAB activity in full-scale systems is a challenge due to the absence of a two-electrode configuration. For the first time, four independent full-scale METland systems were tested for the removal of organic pollutants and nutrients, establishing a correlation with the electroactive response generated by the presence of EAB. The removal efficiency of the systems was enhanced by plants and mixed oxic-anoxic conditions, with an average removal of 56 g of chemical oxygen demand (COD) mbed material -3 day-1 and 2 g of total nitrogen (TN) mbed material -3 day-1 for Ørby 2 (partially saturated system). The estimated electron current density (J) provides evidence of the presence of EAB and its relationship with the removal of organic matter. The tested METland systems reached the max. values of 188.14 mA m-2 (planted system; IMDEA 1), 223.84 mA m-2 (non-planted system; IMDEA 2), 125.96 mA m-2 (full saturated system; Ørby 1), and 123.01 mA m-2 (partially saturated system; Ørby 2). These electron flow values were remarkable for systems that were not designed for energy harvesting and unequivocally show how electrons circulate even in the absence of a two-electrode system. The relation between organic load rate (OLR) at the inlet and coulombic efficiency (CE; %) showed a decreasing trend, with values ranging from 8.8 to 53% (OLR from 2.0 to 16.4 g COD m-2 day-1) for IMDEA systems and from 0.8 to 2.5% (OLR from 41.9 to 45.6 g COD m-2 day-1) for Ørby systems. This pattern denotes that the treatment of complex mixtures such as real wastewater with high and variable OLR should not necessarily result in high CE values. METland technology was validated as an innovative and efficient solution for treating wastewater for decentralized locations.

Ex-ante quantification of nutrient, total solids, and water flows in sanitation systems

To prioritise sustainable sanitation systems in strategic sanitation planning, indicators such as local appropriateness or resource recovery have to be known at the pre-planning phase. The quantification of resource recovery remains a challenge because existing substance flow models require large amounts of input data and can therefore only be applied for a few options at a time for which implementation examples exist. This paper aims to answer two questions: How can we predict resource recovery and losses of sanitation systems ex-ante at the pre-planning phase? And how can we do this efficiently to consider the entire sanitation system option space? The approach builds on an existing model to create all valid sanitation systems from a set of conventional and emerging technologies and to evaluate their appropriateness for a given application case. It complements the previous model with a Substance Flow Model (SFM) and with transfer coefficients from a technology library to quantify nutrients (phosphorus and nitrogen), total solids (as an indicator for energy and organics), and water flows in sanitation systems ex ante. The transfer coefficients are based on literature data and expert judgement. Uncertainties resulting from the variability of literature data or ignorance of experts are explicitly considered, allowing to assess the robustness of the model output. Any (future) technologies or additional products can easily be added to the library. The model is illustrated with a small didactic example showing how 12 valid system configurations are generated from a few technologies, and how substance flows, recovery ratios, and losses to soil, air, and water are quantified considering uncertainties. The recovery ratios vary between 0 and 28% for phosphorus, 0-10% for nitrogen, 0-26% for total solids, and 0-12% for water. The uncertainties reflect the high variability of the literature data but are comparable to those obtained in studies using a conventional post-ante material flow analysis (generally about 30% variability at the scale of a an urban area). Because the model is fully automated and based on literature data, it can be applied ex-ante to a large and diverse set of possible sanitation systems as shown with a real application case. From the 41 technologies available in the library, 101,548 systems are generated and substance flows are modelled. The resulting recovery ratios range from nothing to almost 100%. The two examples also show that recovery depend on technology interactions and has therefore to be assessed for all possible system configurations and not at the single technology level only. The examples also show that there exist trade-offs among different types of reuse (e.g. energy versus nutrients) or different sustainability indicators (e.g. local appropriateness versus resource recovery). These results show that there is a need for such an automated and generic approach that provides recovery data for all system configurations already at the pre-planning phase. The approach presented enables to integrate transparently the best available knowledge for a growing number of sanitation technologies into a planning process. The resulting resource recovery and loss ratios can be used to prioritise resource efficient systems in sanitation planning, either for the pre-selection or the detailed evaluation of options using e.g. MCDA. The results can also be used to guide future development of technology and system innovations. As resource recovery becomes more relevant and novel sanitation technologies and system options emerge, the approach presents itself as a useful tool for strategic sanitation planning in line with the Sustainable Development Goals (SDGs).

Potential of constructed wetland treatment systems for agricultural wastewater reuse under the EU framework

One of the solutions for the problems regarding increasing water scarcity and pollution of water resources can be wastewater reuse. Constructed wetlands (CWs) are a sustainable and cost-effective technology for wastewater treatment. If they are able to produce effluent of a needed quality, they can be a valuable addition for wastewater reuse schemes. This review studied 39 treatment systems based on CWs, and it assessed their characteristics and performance on pollutant removal. Moreover, their potential to reach the new European Union standards for agricultural wastewater reuse was evaluated. The results showed that the combination of CWs with additional technologies (e.g. UV treatment, anaerobic reactors) can further increase their performance and provide better removal efficiencies in comparison with conventional horizontal and vertical subsurface flow CWs. Particularly, hybrid systems showed a better removal of organic matter and bacterial indicators than single-stage CWs. For most of the systems considered, the concentrations of biochemical oxygen demand and total suspended solids in treated effluent were below the limits for agricultural reuse. However, that was often not the case with Escherichia coli and therefore it is recommended to add a disinfection unit to the systems in order to achieve the levels required in the case of agricultural reuse.

Indigenous Knowledge and Acceptability of Treated Effluent in Agriculture

The twin challenges of lack of access to improved sanitation and food insecurity remain critical, particularly in the global south. With cognizance of the nutrient potential of human excreta, there has been increasing interest in linking sanitation innovations with agriculture by using nutrients recovered from human excreta for crop production, thus, closing the nutrient loop. While studies and field trials have explored and validated the technical feasibility of reusing nutrients recovered from human excreta in agriculture, there is still limited knowledge of its social acceptability. This study examined whether indigenous knowledge can be leveraged to increase the acceptability of human-excreta-derived plant nutrient sources such as treated effluent in agriculture. A qualitative research design comprising seven focus group interviews (five in rural areas and two in peri-urban areas) was conducted in KwaZulu Natal, South Africa. Findings from the focus groups reveal a willingness to grow and consume food using treated effluent. Additionally, participants made references to indigenous practices that encourage recycling and reuse of human excreta. Given the potential to simultaneously address issues of food insecurity and sanitation that characterize many peri-urban and rural areas in South Africa, we recommend further studies in this area.

Review of Circular Economy in urban water sector: Challenges and opportunities in India

Increasing urbanization and rapid depletion of resources have forced authorities to shift from traditional linear system of take-make-use-dispose to circular system of resource conservation. Circular Economy (CE) is a sustainable development approach that works on the waste management strategy of reduce, reuse, recycle, and recover. Considerable work has been performed on CE in various sectors such as in electronic sector, construction sector, automotive sector, etc. However, CE in the water sector is gaining rapid attention, because of imbalance in water resources and the prevailing linear approach. The aim of this study is to review the world-wide growth of CE concept in the water sector from an economic, environmental, social, and technical perspective. 98 publications were selected by systematic literature review and categorized in economic, environmental, social, and technical criteria including a combination of multiple criteria. In this study, the world-wide status of CE implementation in the water sector is assessed and strategies to encourage and enhance CE implementation are proposed. The six BS8001:2017 principles and 6Rs (reduce, reuse, recycle, reclaim, recover, restore) of waste management are critically analyzed for deriving recommendations and successful implementation of CE in water sector. Finally, challenges and opportunities to implement CE in the water sector in India are discussed.

Community level physiological profiling of microbial electrochemical-based constructed wetlands

The performance of constructed wetlands (CW) can be enhanced through the use of microbial electrochemical technologies like METland systems. Given its novelty, uncertainties exist regarding processes responsible for the pollutant removal and microbial activity within the systems. Genetic characterization of microbial communities of METlands is desirable, but it is a time and resource consuming. An alternative, is the functional analysis based on community-level physiological profile (CLPP), which allows to evaluate the diversity of microbial communities based on the carbon consumption patterns and derived indexes (average well color development - AWCD -, richness, and diversity). This study aimed to characterize the microbial community function of laboratory-scale METlands using the CLPP method. It encompassed the analysis of planted and non-planted set-ups of two carbon-based electroconductive materials (Coke-A and Coke-LSN) colonized with electroactive biofilms, and compared to Sand-filled columns. Variations in the microbial metabolic activity were found to depend on the characteristics of the material rather than to the presence of plants. Coke-A systems showed lower values of AWCD, richness, and diversity than Sand and Coke-LSN systems. This suggests that Coke-A systems provided more favorable conditions for the development of relatively homogeneous microbial biofilms. Additionally, typical parameters of water quality were measured and correlations between utilization of carbon sources and removal of pollutants were established. The results provide useful insight into the spatial dynamics of the microbial activity of METland systems.