Pollutant and Microorganism Removal From Water by Hydrodynamic Cavitation

Recent trends in the applications of sonochemical reactors as an advanced oxidation process for the remediation of microbial hazards associated with water and wastewater: A critical review

Water is one of the major sources that spread human diseases through contamination with bacteria and other pathogenic microorganisms. This review focuses on microbial hazards as they are often present in water and wastewater and cause various human diseases. Among the currently used disinfection methods, sonochemical reactors (SCRs) that produce free radicals combined with advanced oxidation processes (AOPs) have received significant attention from the scientific community. Also, this review discussed various types of cavitation reactors, such as acoustic cavitation reactors (ACRs) utilizing ultrasonic energy (UE), which had been widely employed, involving AOPs for treating contaminated waters. Besides ACRs, hydrodynamic cavitation reactors (HCRs) also effectively destroy and deactivate microorganisms to varying degrees. Cavitation is the fundamental phenomenon responsible for initiating many sonochemical reactions in liquids. Bacterial degradation occurs mainly due to the thinning of microbial membranes, local warming, and the generation of free radicals due to cavitation. Over the years, although extensive investigations have focused on the antimicrobial effects of UE (ultrasonic energy), the primary mechanism underlying the cavitation effects in the disinfection process, inactivation of microbes, and chemical reactions involved are still poorly understood. Therefore, studies under different conditions often lead to inconsistent results. This review investigates and compares other mechanisms and performances from greener and environmentally friendly sonochemical techniques to the remediation of microbial hazards associated with water and wastewater. Finally, the energy aspects, challenges, and recommendations for future perspectives have been provided.

Hydrodynamic cavitation for micropollutant degradation in water - Correlation of bisphenol A degradation with fluid mechanical properties

The present work addresses the correlation of bisphenol A (BPA) degradation by hydrodynamic cavitation with the fluid mechanical properties of the cavitating jet in the reactor. The effects of inlet pressure and two orifices were investigated. The fluid mechanics conditions during the reaction were evaluated by optical measurements to determine the jet length, bubble volume, number of bubbles, and bubble size distribution. In addition, chemiluminescence of luminol is used to localize chemically active bubbles due to the generation of hydroxyl radicals in the reactor chamber. The correlation between the rate constants of BPA degradation and the mechanical properties of the liquid is discussed. Here, linear dependencies between the degradation of BPA and the volume expansion of the bubble volume and chemiluminescence are found, allowing prediction of the rate constants and the hydroxyl radicals generated. BPA degradation of 50% was achieved in 30 min with the 1.7 mm nozzle at 25 bar. However, the 1 mm nozzle has been demonstrated to be more energetically efficient, achieving 10% degradation with 30% less power per 100 passes. There is a tendency for the number of small bubbles in the reactor to increase with smaller nozzle and increasing pressure difference.

Water disinfection by orifice-induced hydrodynamic cavitation

Hydrodynamic Cavitation (HC) is considered as a promising water-disinfection technique. Due to the enormous complexity of the physical and chemical processes at play, research on HC reactors is usually carried out following an empirical approach. Surprisingly, past experimental studies have never been designed on dimensional-analysis principles, which makes it difficult to identify the key processes controlling the problem, isolate their effects and scale up the results from laboratory to full-scale scenarios. The present paper overcomes this issue and applies the principles of dimensional analysis to identify the major non-dimensional parameters controlling disinfection efficacy in classical HC reactors, namely orifice plates. On the basis of this analysis, it presents results from a new set of experiments, which were designed to isolate mainly the effects of the so-called cavitation number (σ_v). Experimental data confirm that the disinfection efficacy of orifice plates increases with decreasing σ_v. Finally, in order to discuss the significance of the results presented herein and frame the scope of future research, the present paper provides an overview of the drawbacks associated with dimensional analysis within the context of HC.