Advances of hyaluronic acid in stem cell therapy and tissue engineering, including current clinical trials

Injectable mineralized Sr-hydroxyapatite nanoparticles-loaded ɛ-polylysine-hyaluronic acid composite hydrogels for bone regeneration

In this study, multifunctional injectable mineralized antibacterial nanocomposite hydrogels were prepared by a homogenous distribution of high content of (up to 60 wt%) Sr-substituted hydroxyapatite (Sr-HAp) nanoparticles into covalently cross-linked ɛ-polylysine (ɛ-PL) and hyaluronic acid (HA) hydrogel network. The developed bone-targeted nanocomposite hydrogels were to synergistically combine the functional properties of bioactive Sr-HAp nanoparticles and antibacterial ɛ-PL-HA hydrogels for bone tissue regeneration. Viscoelasticity, injectability, structural parameters, degradation, antibacterial activity, and in vitro biocompatibility of the fabricated nanocomposite hydrogels were characterized. Physical performances of the ɛ-PL-HA hydrogels can be tailored by altering the mass ratio of Sr-HAp. The nanocomposite hydrogels revealed good stability against enzymatic degradation, which increased from 5 to 19 weeks with increasing the mass ratio of Sr-HAp from 40 % to 60 %. The loading of the Sr-HAp at relatively high mass ratios did not suppress the fast-acting and long-term antibacterial activity of the ɛ-PL-HA hydrogels against S. aureus and E. coli. The cell studies confirmed the cytocompatibility and pre-collagen I synthesis-promoting activity of the fabricated nanocomposite hydrogels.

Hyaluronic acid stimulation of stem cells for cardiac repair: a cell-free strategy for myocardial infarct

BACKGROUND

Myocardial infarction (MI), a representative form of ischemic heart disease, remains a huge burden worldwide. This study aimed to explore whether extracellular vesicles (EVs) secreted from hyaluronic acid (HA)-primed induced mesenchymal stem cells (HA-iMSC-EVs) could enhance the cardiac repair after MI.

RESULTS

HA-iMSC-EVs showed typical characteristics for EVs such as morphology, size, and marker proteins expression. Compared with iMSC-EVs, HA-iMSC-EVs showed enhanced tube formation and survival against oxidative stress in endothelial cells, while reduced reactive oxygen species (ROS) generation in cardiomyocytes. In THP-1 macrophages, both types of EVs markedly reduced the expression of pro-inflammatory signaling players, whereas HA-iMSC-EVs were more potent in augmenting anti-inflammatory markers. A significant decrease of inflammasome proteins was observed in HA-iMSC-EV-treated THP-1. Further, phospho-SMAD2 as well as fibrosis markers in TGF-β1-stimulated cardiomyocytes were reduced in HA-iMSC-EVs treatment. Proteomic data showed that HA-iMSC-EVs were enriched with multiple pathways including immunity, extracellular matrix organization, angiogenesis, and cell cycle. The localization of HA-iMSC-EVs in myocardium was confirmed after delivery by either intravenous or intramyocardial route, with the latter increased intensity. Echocardiography revealed that intramyocardial HA-iMSC-EVs injections improved cardiac function and reduced adverse cardiac remodeling and necrotic size in MI heart. Histologically, MI hearts receiving HA-iMSC-EVs had increased capillary density and viable myocardium, while showed reduced fibrosis.

CONCLUSIONS

Our results suggest that HA-iMSC-EVs improve cardiac function by augmenting vessel growth, while reducing ROS generation, inflammation, and fibrosis in MI heart.

Thermo-Responsive Hyaluronan-Based Hydrogels Combined with Allogeneic Cytotherapeutics for the Treatment of Osteoarthritis

Thermo-responsive hyaluronan-based hydrogels and FE002 human primary chondroprogenitor cell sources have both been previously proposed as modern therapeutic options for the management of osteoarthritis (OA). For the translational development of a potential orthopedic combination product based on both technologies, respective technical aspects required further optimization phases (e.g., hydrogel synthesis upscaling and sterilization, FE002 cytotherapeutic material stabilization). The first aim of the present study was to perform multi-step in vitro characterization of several combination product formulas throughout the established and the optimized manufacturing workflows, with a strong focus set on critical functional parameters. The second aim of the present study was to assess the applicability and the efficacy of the considered combination product prototypes in a rodent model of knee OA. Specific characterization results (i.e., spectral analysis, rheology, tribology, injectability, degradation assays, in vitro biocompatibility) of hyaluronan-based hydrogels modified with sulfo-dibenzocyclooctyne-PEG4-amine linkers and poly(N-isopropylacrylamide) (HA-L-PNIPAM) containing lyophilized FE002 human chondroprogenitors confirmed the suitability of the considered combination product components. Specifically, significantly enhanced resistance toward oxidative and enzymatic degradation was shown in vitro for the studied injectable combination product prototypes. Furthermore, extensive multi-parametric (i.e., tomography, histology, scoring) in vivo investigation of the effects of FE002 cell-laden HA-L-PNIPAM hydrogels in a rodent model revealed no general or local iatrogenic adverse effects, whereas it did reveal some beneficial trends against the development of knee OA. Overall, the present study addressed key aspects of the preclinical development process for novel biologically-based orthopedic combination products and shall serve as a robust methodological basis for further translational investigation and clinical work.

Therapeutic potential and protection enhancement of mesenchymal stem cell against cisplatin-induced nephrotoxicity using hyaluronic acid-chitosan nanoparticles as an adjuvant

A newly synthesized nanoplatform of hyaluronic acid and chitosan nanoparticles (HA/CNPs) was applied to improve the therapeutic efficacy and protection of bone marrow mesenchymal stem cells (BM-MSCs) against cisplatin (CDDP)-induced nephrotoxicity in rats. CDDP administration causes significant increases in levels of serum creatinine (SCr), urea, and KIM-1 coupled with significant albumin level falls, as indicative of acute renal dysfunction. Moreover, the level of the antioxidant enzyme (GSH) was significantly decreased, while the levels of lipid peroxidation (MDA) and inflammatory (IL-6) and apoptotic (caspase-3) markers were significantly increased, indicating a decline in the kidney's antioxidant defense and increased inflammation. In contrast, when rats were pre-treated with either MSCs or MSCs-HA/CNPs before receiving CDDP, the levels of SCr, urea, KIM-1, MDA, IL-6, and caspase-3 were significantly decreased with simultaneous significant rises in GSH and albumin, impelling a great improvement in the antioxidant and anti-inflammatory defenses of the kidney as well as its functions. Intriguingly, MSCs-HA/CNPs were more effective against caspase-3 than MSCs alone, revealing the high anti-apoptotic capability of HA/CNPs. This finding suggests that HA/CNPs could effectively protect MSCs from oxidative stress and apoptosis and thus increase their stability and longevity.

A Review of Recent Innovations in Cartilage Regeneration Strategies for the Treatment of Primary Osteoarthritis of the Knee: Intra-articular Injections

Background

The pathology of primary osteoarthritis (OA) begins with structural cartilage damage, which initiates a self-propagating inflammatory pathway that further exacerbates cartilage deterioration. Current standard of care for knee primary OA involves treating the inflammatory symptoms to manage pain, which includes intra-articular (IA) injections of cortisone, an anti-inflammatory steroid, followed by a series of joint-cushioning hyaluronic acid gel injections. However, these injections do not delay the progression of primary OA. More focus on the underlying cellular pathology of OA has prompted researchers to develop treatments targeting the biochemical mechanisms of cartilage degradation.

Purpose

Researchers have yet to develop a United States Food and Drug Administration (FDA)-approved injection that has been demonstrated to significantly regenerate damaged articular cartilage. This paper reviews the current research on experimental injections aimed at achieving cellular restoration of the hyaline cartilage tissue of the knee joint.

Study Design

Narrative review.

Methods

The authors conducted a narrative literature review examining studies on primary OA pathogenesis and a systematic review of non-FDA-approved IA injections for the treatment of primary OA of the knee, described as "disease-modifying osteoarthritis drugs" in phase 1, 2, and 3 clinical trials.

Conclusion

New treatment approaches for primary OA investigate the potential of genetic therapies to restore native cartilage. It is clear that the most promising IA injections that could improve treatment of primary OA are bioengineered advanced-delivery steroid-hydrogel preparations, ex vivo expanded allogeneic stem cell injections, genetically engineered chondrocyte injections, recombinant fibroblast growth factor therapy, injections of selective proteinase inhibitors, senolytic therapy via injections, injectable antioxidant therapies, injections of Wnt pathway inhibitors, injections of nuclear factor-kappa β inhibitors, injections of modified human angiopoietin-like-3, various potential viral vector-based genetic therapy approaches, and RNA genetic technology administered via injections.

Chondroitin Sulphate/Dermatan Sulphate Proteoglycans: Potential Regulators of Corneal Stem/Progenitor Cell Phenotype In Vitro

Chondroitin sulphate (CS) proteoglycans with variable sulphation-motifs along their glycosaminoglycan (GAG) chains are closely associated with the stem cell niche of articular cartilage, where they are believed to influence the characteristics of the resident stem cells. Here, we investigated the immunohistochemical distribution of hybrid CS/dermatan sulphate (DS) GAGs in the periphery of the adult chicken cornea, which is the location of the cornea's stem cell niche in a number of species, using a monoclonal antibody, 6C3, that recognises a sulphation motif-specific CS/DS GAG epitope. This revealed positive labelling that was restricted to the subepithelial corneal stroma, as well as nearby bony structures within the sclera, called ossicles. When cultivated on cell culture dishes coated with 6C3-rich CS/DS, corneal stromal cells (keratocytes) that had been isolated from embryonic chicken corneas formed circular colonies, which took several days to reach confluency. A flow cytometric analysis of these keratocytes revealed changes in their expression levels of the indicative stem cell markers, Connexin 43 (Cx43), Paired Box 6 (PAX6), B-lymphoma Moloney murine leukemia virus insertion region-1 (Bmi-1), and C-X-C Chemokine Receptor 4 (CXCR4) suggestive of a less-differentiated phenotype compared with expression levels in cells not exposed to CS/DS. These findings support the view that CS/DS promotes the retention of a stem cell phenotype in corneal cells, much as it has been proposed to do in other connective tissues.

Lyophilized Progenitor Tenocyte Extracts: Sterilizable Cytotherapeutic Derivatives with Antioxidant Properties and Hyaluronan Hydrogel Functionalization Effects

Cultured primary progenitor tenocytes in lyophilized form were previously shown to possess intrinsic antioxidant properties and hyaluronan-based hydrogel viscosity-modulating effects in vitro. The aim of this study was to prepare and functionally characterize several stabilized (lyophilized) cell-free progenitor tenocyte extracts for inclusion in cytotherapy-inspired complex injectable preparations. Fractionation and sterilization methods were included in specific biotechnological manufacturing workflows of such extracts. Comparative and functional-oriented characterizations of the various extracts were performed using several orthogonal descriptive, colorimetric, rheological, mechanical, and proteomic readouts. Specifically, an optimal sugar-based (saccharose/dextran) excipient formula was retained to produce sterilizable cytotherapeutic derivatives with appropriate functions. It was shown that extracts containing soluble cell-derived fractions possessed conserved and significant antioxidant properties (TEAC) compared to the freshly harvested cellular starting materials. Progenitor tenocyte extracts submitted to sub-micron filtration (0.22 µm) and 60Co gamma irradiation terminal sterilization (5−50 kGy) were shown to retain significant antioxidant properties and hyaluronan-based hydrogel viscosity modulating effects. Hydrogel combination products displayed important efficacy-related characteristics (friction modulation, tendon bioadhesivity) with significant (p < 0.05) protective effects of the cellular extracts in oxidative environments. Overall, the present study sets forth robust control methodologies (antioxidant assays, H2O2-challenged rheological setups) for stabilized cell-free progenitor tenocyte extracts. Importantly, it was shown that highly sensitive phases of cytotherapeutic derivative manufacturing process development (purification, terminal sterilization) allowed for the conservation of critical biological extract attributes.

Angiogenesis and Re-endothelialization in decellularized scaffolds: Recent advances and current challenges in tissue engineering

Decellularization of tissues and organs has recently become a promising approach in tissue engineering and regenerative medicine to circumvent the challenges of organ donation and complications of transplantations. However, one main obstacle to reaching this goal is acellular vasculature angiogenesis and endothelialization. Achieving an intact and functional vascular structure as a vital pathway for supplying oxygen and nutrients remains the decisive challenge in the decellularization/re-endothelialization procedure. In order to better understand and overcome this issue, complete and appropriate knowledge of endothelialization and its determining variables is required. Decellularization methods and their effectiveness, biological and mechanical characteristics of acellular scaffolds, artificial and biological bioreactors, and their possible applications, extracellular matrix surface modification, and different types of utilized cells are factors affecting endothelialization consequences. This review focuses on the characteristics of endothelialization and how to optimize them, as well as discussing recent developments in the process of re-endothelialization.

4D Biofabrication of Mechanically Stable Tubular Constructs Using Shape Morphing Porous Bilayers for Vascularization Application

This study reports the fabrication of highly porous electrospun self-folding bilayers, which fold into tubular structures with excellent mechanical stability, allowing them to be easily manipulated and handled. Two kinds of bilayers based on biocompatible and biodegradable soft (PCL, polycaprolactone) and hard (PHB, poly-hydroxybutyrate) thermoplastic polymers have been fabricated and compared. Multi-scroll structures with tunable diameter are obtained after the shape transformation of the bilayer in aqueous media, where PCL-based bilayer rolled longitudinally and PHB-based one rolled transversely with respect to the fiber direction. A combination of higher elastic modulus and transverse orientation of fibers with respect to rolling direction allowed precise temporal control of shape transformation of PHB-bilayer - stress produced by swollen methacrylated hyaluronic acid (HA-MA) do not relax with time and folding is not affected by the fact that bilayer is fixed in unfolded state in cell culture medium for more than 1 h. This property of PHB-bilayer allowed cell culturing without a negative effect on its shape transformation ability. Moreover, PHB-based tubular structure demonstrated superior mechanical stability compared to PCL-based ones and do not collapse during manipulations that happened to PCL-based one. Additionally, PHB/HA-MA bilayers showed superior biocompatibility, degradability, and long-term stability compared to PCL/HA-MA.

Hyaluronic Acid: Known for Almost a Century, but Still in Vogue

Hyaluronic acid (HA) has a special position among glycosaminoglycans. As a major component of the extracellular matrix (ECM). This simple, unbranched polysaccharide is involved in the regulation of various biological cell processes, whether under physiological conditions or in cases of cell damage. This review summarizes the history of this molecule's study, its distinctive metabolic pathway in the body, its unique properties, and current information regarding its interaction partners. Our main goal, however, is to intensively investigate whether this relatively simple polymer may find applications in protecting against ionizing radiation (IR) or for therapy in cases of radiation-induced damage. After exposure to IR, acute and belated damage develops in each tissue depending upon the dose received and the cellular composition of a given organ. A common feature of all organ damage is a distinct change in composition and structure of the ECM. In particular, the important role of HA was shown in lung tissue and the variability of this flexible molecule in the complex mechanism of radiation-induced lung injuries. Moreover, HA is also involved in intermediating cell behavior during morphogenesis and in tissue repair during inflammation, injury, and would healing. The possibility of using the HA polymer to affect or treat radiation tissue damage may point to the missing gaps in the responsible mechanisms in the onset of this disease. Therefore, in this article, we will also focus on obtaining answers from current knowledge and the results of studies as to whether hyaluronic acid can also find application in radiation science.

Mesenchymal stem cell-encapsulated cellulose nanofiber microbeads and enhanced biological activities by hyaluronic acid incorporation

Cell microencapsulation is a process to entrap viable and functional cells within a biocompatible and semi-permeable matrix to provide a favorable microenvironment to the cells. Cellulose nanofiber (CNF), a low-cost and sustainable cellulose-derived natural polymer, has been studied as a matrix for 3D stem cell culture in the form of a bulk hydrogel. Here, the preparation of CNF microbeads for the long-term 3D culture of human adipose-derived stem cells (hADSCs) was demonstrated. Furthermore, hyaluronic acid (HA) was physically incorporated into the stem cell encapsulated CNF microbeads with various molecular weights and concentrations to investigate its potential in enhancing the cellular bioactivities. The beneficial effects of HA incorporation on encapsulated cells were significant compared to CNF microbeads, especially with 700 kDa molecular weight and 0.2% in concentration in terms of cell proliferation (~2 times) and VEGF secretion (~2 times) while maintaining their stemness. All the results demonstrated that the HA-incorporated CNF microbeads could serve as a promising microencapsulation matrix for hADSCs.

Advances in spray products for skin regeneration

To date, skin wounds are still an issue for healthcare professionals. Although numerous approaches have been developed over the years for skin regeneration, recent advances in regenerative medicine offer very promising strategies for the fabrication of artificial skin substitutes, including 3D bioprinting, electrospinning or spraying, among others. In particular, skin sprays are an innovative technique still under clinical evaluation that show great potential for the delivery of cells and hydrogels to treat acute and chronic wounds. Skin sprays present significant advantages compared to conventional treatments for wound healing, such as the facility of application, the possibility to treat large wound areas, or the homogeneous distribution of the sprayed material. In this article, we review the latest advances in this technology, giving a detailed description of investigational and currently commercially available acellular and cellular skin spray products, used for a variety of diseases and applying different experimental materials. Moreover, as skin sprays products are subjected to different classifications, we also explain the regulatory pathways for their commercialization and include the main clinical trials for different skin diseases and their treatment conditions. Finally, we argue and suggest possible future trends for the biotechnology of skin sprays for a better use in clinical dermatology.

•

Skin sprays represent a promising technique for wound healing applications.

•

Skin sprays can deliver cells and hydrogels with great facility over large wounds.

•

Many skin spray products have been studied, only a few have been commercialized.

•

Numerous clinical trials study spray products for skin diseases like psoriasis.

•

Improved spraying devices should be developed for different materials and cells.

Laser-Assisted Fabrication of Injectable Nanofibrous Cell Carriers

The use of injectable biomaterials for cell delivery is a rapidly expanding field which may revolutionize the medical treatments by making them less invasive. However, creating desirable cell carriers poses significant challenges to the clinical implementation of cell-based therapeutics. At the same time, no method has been developed to produce injectable microscaffolds (MSs) from electrospun materials. Here the fabrication of injectable electrospun nanofibers is reported on, which retain their fibrous structure to mimic the extracellular matrix. The laser-assisted micro-scaffold fabrication has produced tens of thousands of MSs in a short time. An efficient attachment of cells to the surface and their proliferation is observed, creating cell-populated MSs. The cytocompatibility assays proved their biocompatibility, safety, and potential as cell carriers. Ex vivo results with the use of bone and cartilage tissues proved that NaOH hydrolyzed and chitosan functionalized MSs are compatible with living tissues and readily populated with cells. Injectability studies of MSs showed a high injectability rate, while at the same time, the force needed to eject the load is no higher than 25 N. In the future, the produced MSs may be studied more in-depth as cell carriers in minimally invasive cell therapies and 3D bioprinting applications.

Combination of Hyaluronan and Lyophilized Progenitor Cell Derivatives: Stabilization of Functional Hydrogel Products for Therapeutic Management of Tendinous Tissue Disorders

Cultured progenitor cells and derivatives have been used in various homologous applications of cutaneous and musculoskeletal regenerative medicine. Active pharmaceutical ingredients (API) in the form of progenitor cell derivatives such as lysates and lyophilizates were shown to retain function in controlled cellular models of wound repair. On the other hand, hyaluronan-based hydrogels are widely used as functional vehicles in therapeutic products for tendon tissue disorders. The aim of this study was the experimental characterization of formulations containing progenitor tenocyte-derived APIs and hyaluronan, for the assessment of ingredient compatibility and stability in view of eventual therapeutic applications in tendinopathies. Lyophilized APIs were determined to contain relatively low quantities of proteins and growth factors, while being physicochemically stable and possessing significant intrinsic antioxidant properties. Physical and rheological quantifications of the combination formulas were performed after hydrogen peroxide challenge, outlining significantly improved evolutive viscoelasticity values in accelerated degradation settings. Thus, potent effects of physicochemical protection or stability enhancement of hyaluronan by the incorporated APIs were observed. Finally, combination formulas were found to be easily injectable into ex vivo tendon tissues, confirming their compatibility with further translational clinical approaches. Overall, this study provides the technical bases for the development of progenitor tenocyte derivative-based injectable therapeutic products or devices, to potentially be applied in tendinous tissue disorders.

Polysaccharide-Based Hydrogels for Microencapsulation of Stem Cells in Regenerative Medicine

Stem cell-based therapy appears as a promising strategy to induce regeneration of damaged and diseased tissues. However, low survival, poor engraftment and a lack of site-specificity are major drawbacks. Polysaccharide hydrogels can address these issues and offer several advantages as cell delivery vehicles. They have become very popular due to their unique properties such as high-water content, biocompatibility, biodegradability and flexibility. Polysaccharide polymers can be physically or chemically crosslinked to construct biomimetic hydrogels. Their resemblance to living tissues mimics the native three-dimensional extracellular matrix and supports stem cell survival, proliferation and differentiation. Given the intricate nature of communication between hydrogels and stem cells, understanding their interaction is crucial. Cells are incorporated with polysaccharide hydrogels using various microencapsulation techniques, allowing generation of more relevant models and further enhancement of stem cell therapies. This paper provides a comprehensive review of human stem cells and polysaccharide hydrogels most used in regenerative medicine. The recent and advanced stem cell microencapsulation techniques, which include extrusion, emulsion, lithography, microfluidics, superhydrophobic surfaces and bioprinting, are described. This review also discusses current progress in clinical translation of stem-cell encapsulated polysaccharide hydrogels for cell delivery and disease modeling (drug testing and discovery) with focuses on musculoskeletal, nervous, cardiac and cancerous tissues.

Rotator Cuff Tendon Healing Using Human Dermal Fibroblasts: Histological and Biomechanical Analyses in a Rabbit Model of Chronic Rotator Cuff Tears

BACKGROUND

Tenocytes derived from tendons have been reported to be effective in the treatment of rotator cuff tears through the expression of extracellular matrix proteins. Human dermal fibroblasts, known to express collagen types I and III as tenocytes do, may likely be substitutes for tenocytes to enhance healing rotator cuff tears.

PURPOSE

To demonstrate the capability of human dermal fibroblasts to enhance healing of rotator cuff tears.

STUDY DESIGN

Controlled laboratory study.

METHODS

The cellular properties and expression profiles of growth factors were compared between human dermal fibroblasts and tenocytes. In both cell types, a series of extracellular matrix proteins were analyzed along with matrix metalloproteinases and tissue inhibitors of metalloproteinases involved in the collagenolytic system. A total of 35 rabbits were divided into 5 groups: normal (n = 2), saline control (n = 9), fibrin control (n = 9), low dose of human fibroblasts (HF-LD; n = 9), and high dose of human fibroblasts (HF-HD; n = 6). Cells were injected into the sutured lesions at 6 weeks after creation of bilateral rotator cuff tears, followed by histological and biomechanical analyses at 12 weeks.

RESULTS

Human dermal fibroblasts exhibited a protein expression pattern similar to that of tenocytes. More specifically, the expression levels of collagen types I and III were comparable between fibroblasts and tenocytes. The histological analysis of 30 surviving rabbits showed that collagen fibers were more continuous and better oriented with a more mature interface between the tendon and bone in the sutured lesions in the HF-LD and HF-HD groups. Most importantly, biomechanical strength, measured using the load to failure at the injection site, was 58.8 ± 8.9 N/kg in the HF-HD group, increasing by approximately 2-fold (P = .0003) over the saline control group.

CONCLUSION

Human dermal fibroblasts, showing cellular properties comparable with tenocytes, effectively enhanced healing of chronic rotator cuff tears in rabbits.

CLINICAL RELEVANCE

Human dermal fibroblasts can be used in place of tenocytes to enhance healing of rotator cuff tears.

Hyaluronic acid-fibrin hydrogels show improved mechanical stability in dermo-epidermal skin substitutes

Human plasma-derived bilayered skin substitutes have been successfully used by our group in different skin tissue engineering applications. However, several issues associated with their poor mechanical properties were observed, and they often resulted in rapid contraction and degradation. In this sense, hydrogels composed of plasma-derived fibrin and thiolated-hyaluronic acid (HA-SH, 0.05-0.2% w/v) crosslinked with poly(ethylene glycol) diacrylate (PEGDA, 2:1, 6:1, 10:1 and 14:1 mol of thiol to moles of acrylate) were developed to reduce the shrinking rates and enhance the mechanical properties of the plasma-derived matrices. Plasma/HA-SH-PEGDA hydrogels showed a decrease in the contraction behaviour ranging from 5% to 25% and an increase in Young's modulus. Furthermore, the results showed that a minimal amount of the added HA-SH was able to escape the plasma/HA-SH-PEGDA hydrogels after incubation in PBS. The results showed that the increase in rigidity of the matrices as well as the absence of adhesion cellular moieties in the second network of HA-SH/PEGDA, resulted in a decrease in contraction in the presence of the encapsulated primary human fibroblasts (hFBs), which may have been related to an overall decrease in proliferation of hFBs found for all hydrogels after 7 days with respect to the plasma control. The metabolic activity of hFB returned to the control levels at 14 days except for the 2:1 PEGDA crosslinking ratio. The metabolic activity of primary human keratinocytes (hKCs) seeded on the hydrogels showed a decrease when high amounts of HA-SH and PEGDA crosslinker were incorporated. Organotypic skins formed in vitro after 21 days with plasma/HA-SH-PEGDA hydrogels with an HA content of 0.05% w/v and a 2:1 crosslinking ratio were up to three times thicker than the plasma controls, evidencing a reduction in contraction, while they also showed better and more homogeneous keratin 10 (K10) expression in the supra-basal layer of the epidermis. Furthermore, filaggrin expression showed the formation of an enhanced stratum corneum for the constructs containing HA. These promising results indicate the potential of using these biomimetic hydrogels as in vitro skin models for pharmaceutical products and cosmetics and future work will elucidate their potential functionality for clinical treatment.

An Overview on Thermosensitive Oral Gel Based on Poloxamer 407

In this review, we describe the application of thermosensitive hydrogels composed of poloxamer in medicine, especially for oral cavities. Thermosensitive hydrogels remain fluid at room temperature; at body temperature, they become more viscous gels. In this manner, the gelling system can remain localized for considerable durations and control and prolong drug release. The chemical structure of the poloxamer triblock copolymer leads to an amphiphilic aqueous solution and an active surface. Moreover, the poloxamer can gel by forming micelles in an aqueous solution, depending on its critical micelle concentration and critical micelle temperature. Owing to its controlled-release effect, a thermosensitive gel based on poloxamer 407 (P407) is used to deliver drugs with different characteristics. As demonstrated in studies on poloxamer formulations, an increase in gelling viscosity decreases the drug release rate and gel dissolution time to the extent that it prolongs the drug’s duration of action in disease treatment. This property is used for drug delivery and different therapeutic applications. Its unique route of administration, for many oral diseases, is advantageous over traditional routes of administration, such as direct application and systemic treatment. In conclusion, thermosensitive gels based on poloxamers are suitable and have great potential for oral disease treatment.

Carbohydrate-Based Macromolecular Biomaterials

Carbohydrates are the most abundant and one of the most important biomacromolecules in Nature. Except for energy-related compounds, carbohydrates can be roughly divided into two categories: Carbohydrates as matter and carbohydrates as information. As matter, carbohydrates are abundantly present in the extracellular matrix of animals and cell walls of various plants, bacteria, fungi, etc., serving as scaffolds. Some commonly found polysaccharides are featured as biocompatible materials with controllable rigidity and functionality, forming polymeric biomaterials which are widely used in drug delivery, tissue engineering, etc. As information, carbohydrates are usually referred to the glycans from glycoproteins, glycolipids, and proteoglycans, which bind to proteins or other carbohydrates, thereby meditating the cell-cell and cell-matrix interactions. These glycans could be simplified as synthetic glycopolymers, glycolipids, and glycoproteins, which could be afforded through polymerization, multistep synthesis, or a semisynthetic strategy. The information role of carbohydrates can be demonstrated not only as targeting reagents but also as immune antigens and adjuvants. The latter are also included in this review as they are always in a macromolecular formulation. In this review, we intend to provide a relatively comprehensive summary of carbohydrate-based macromolecular biomaterials since 2010 while emphasizing the fundamental understanding to guide the rational design of biomaterials. Carbohydrate-based macromolecules on the basis of their resources and chemical structures will be discussed, including naturally occurring polysaccharides, naturally derived synthetic polysaccharides, glycopolymers/glycodendrimers, supramolecular glycopolymers, and synthetic glycolipids/glycoproteins. Multiscale structure-function relationships in several major application areas, including delivery systems, tissue engineering, and immunology, will be detailed. We hope this review will provide valuable information for the development of carbohydrate-based macromolecular biomaterials and build a bridge between the carbohydrates as matter and the carbohydrates as information to promote new biomaterial design in the near future.

Development, characterization and sterilisation of Nanocellulose-alginate-(hyaluronic acid)- bioinks and 3D bioprinted scaffolds for tissue engineering

3D-bioprinting is an emerging technology of high potential in tissue engineering (TE), since it shows effective control over scaffold fabrication and cell distribution. Biopolymers such as alginate (Alg), nanofibrillated cellulose (NC) and hyaluronic acid (HA) offer excellent characteristics for use as bioinks due to their excellent biocompatibility and rheological properties. Cell incorporation into the bioink requires sterilisation assurance, and autoclave, β-radiation and γ-radiation are widely used sterilisation techniques in biomedicine; however, their use in 3D-bioprinting for bioinks sterilisation is still in their early stages. In this study, different sterilisation procedures were applied on NC-Alg and NC-Alg-HA bioinks and their effect on several parameters was evaluated. Results demonstrated that NC-Alg and NC-Alg-HA bioinks suffered relevant rheological and physicochemical modifications after sterilisation; yet, it can be concluded that the short cycle autoclave is the best option to sterilise both NC-Alg based cell-free bioinks, and that the incorporation of HA to the NC-Alg bioink improves its characteristics. Additionally, 3D scaffolds were bioprinted and specifically characterized as well as the D1 mesenchymal stromal cells (D1-MSCs) embedded for cell viability analysis. Notably, the addition of HA demonstrates better scaffold properties, together with higher biocompatibility and cell viability in comparison with the NC-Alg scaffolds. Thus, the use of MSCs containing NC-Alg based scaffolds may become a feasible tissue engineering approach for regenerative medicine.

Extracellular Matrix: Emerging Roles and Potential Therapeutic Targets for Breast Cancer

Increasing evidence shows that the extracellular matrix (ECM) is an important regulator of breast cancer (BC). The ECM comprises of highly variable and dynamic components. Compared with normal breast tissue under homeostasis, the ECM undergoes many changes in composition and organization during BC progression. Induced ECM proteins, including fibrinogen, fibronectin, hyaluronic acid, and matricellular proteins, have been identified as important components of BC metastatic cells in recent years. These proteins play major roles in BC progression, invasion, and metastasis. Importantly, several specific ECM molecules, receptors, and remodeling enzymes are involved in promoting resistance to therapeutic intervention. Additional analysis of these ECM proteins and their downstream signaling pathways may reveal promising therapeutic targets against BC. These potential drug targets may be combined with new nanoparticle technologies. This review summarizes recent advances in functional nanoparticles that target the ECM to treat BC. Accurate nanomaterials may offer a new approach to BC treatment.

Investigation of the structure of regulatory proteins interacting with glycosaminoglycans by combining NMR spectroscopy and molecular modeling - the beginning of a wonderful friendship

The interaction of regulatory proteins with extracellular matrix or cell surface-anchored glycosaminoglycans (GAGs) plays important roles in molecular recognition, wound healing, growth, inflammation and many other processes. In spite of their high biological relevance, protein-GAG complexes are significantly underrepresented in structural databases because standard tools for structure determination experience difficulties in studying these complexes. Co-crystallization with subsequent X-ray analysis is hampered by the high flexibility of GAGs. NMR spectroscopy experiences difficulties related to the periodic nature of the GAGs and the sparse proton network between protein and GAG with distances that typically exceed the detection limit of nuclear Overhauser enhancement spectroscopy. In contrast, computer modeling tools have advanced over the last years delivering specific protein-GAG docking approaches successfully complemented with molecular dynamics (MD)-based analysis. Especially the combination of NMR spectroscopy in solution providing sparse structural constraints with molecular docking and MD simulations represents a useful synergy of forces to describe the structure of protein-GAG complexes. Here we review recent methodological progress in this field and bring up examples where the combination of new NMR methods along with cutting-edge modeling has yielded detailed structural information on complexes of highly relevant cytokines with GAGs.

Hyaluronic Acid Supplement as a Chondrogenic Adjuvant in Promoting the Therapeutic Efficacy of Stem Cell Therapy in Cartilage Healing

The main aim of this study is to investigate the therapeutic efficacy of direct intra-articular injection of bone-marrow-derived stem/stromal cells (BMSCs) and the adjuvant role of hyaluronic acid (HA) in facilitating rabbit articular cartilage repair. First, rabbit BMSCs were treated with a medium containing different concentrations of HA. Later, HA’s influence on BMSCs’ CD44 expression, cell viability, extracellular glycosaminoglycan (GAG) synthesis, and chondrogenic gene expression was evaluated during seven-day cultivation. For the in vivo experiment, 24 rabbits were used for animal experiments and 6 rabbits were randomly allocated to each group. Briefly, chondral defects were created at the medial femoral condyle; group 1 was left untreated, group 2 was injected with HA, group 3 was transplanted with 3 × 10⁶ BMSCs, and group 4 was transplanted with 3 × 10⁶ BMSCs suspended in HA. Twelve weeks post-treatment, the repair outcome in each group was assessed and compared both macroscopically and microscopically. Results showed that HA treatment can promote cellular CD44 expression. However, the proliferation rate of BMSCs was downregulated when treated with 1 mg/mL (3.26 ± 0.03, p = 0.0002) and 2 mg/mL (2.61 ± 0.04, p = 0.0001) of HA compared to the control group (3.49 ± 0.05). In contrast, 2 mg/mL (2.86 ± 0.3) of HA treatment successfully promoted normalized GAG expression compared to the control group (1.88 ± 0.06) (p = 0.0009). The type II collagen gene expression of cultured BMSCs was significantly higher in BMSCs treated with 2 mg/mL of HA (p = 0.0077). In the in vivo experiment, chondral defects treated with combined BMSC and HA injection demonstrated better healing outcomes than BMSC or HA treatment alone in terms of gross grading and histological scores. In conclusion, this study helps delineate the role of HA as a chondrogenic adjuvant in augmenting the effectiveness of stem-cell-based injection therapy for in vivo cartilage repair. From a translational perspective, the combination of HA and BMSCs is a convenient, ready-to-use, and effective formulation that can improve the therapeutic efficacy of stem-cell-based therapies.

Polysaccharide-Based Biomaterials in Tissue Engineering: A Review

In addition to proteins and nucleic acids, polysaccharides are an important type of biomacromolecule widely distributed in plants, animals, and microorganisms. Polysaccharides are considered as promising biomaterials due to their significant bioactivities, natural abundance, immunoactivity, and chemical modifiability for tissue engineering (TE) applications. Due to the similarities of the biochemical properties of polysaccharides and the extracellular matrix of human bodies, polysaccharides are increasingly recognized and accepted. Furthermore, the degradation behavior of these macromolecules is generally nontoxic. Certain delicate properties, such as remarkable mechanical properties and tunable tissue response, can be obtained by modifying the functional groups on the surface of polysaccharide molecules. The applications of polysaccharide-based biomaterials in the TE field have been growing intensively in recent decades, for example, bone/cartilage regeneration, cardiac regeneration, neural regeneration, and skin regeneration. This review summarizes the main essential properties of polysaccharides, including their chemical properties, crosslinking mechanisms, and biological properties, and focuses on the association between their structures and properties. The recent progress in polysaccharide-based biomaterials in various TE applications is reviewed, and the prospects for future studies are addressed as well. We intend this review to offer a comprehensive understanding of and inspiration for the research and development of polysaccharide-based materials in TE.

A cell-based combination product for the repair of large bone defects

Regenerative cell-based implants using periosteum-derived stem cells were developed for the treatment of large 3 cm fresh and 4.5 centimeter biological compromised bone gaps in a tibial sheep model and compared with an acellular ceramic-collagen void filler. It was hypothesized that the latter is insufficient to heal large skeletal defects due to reduced endogenous biological potency. To this purpose a comparison was made between the ceramic dicalciumphosphate scaffold (CopiOs®) as such, the same ceramic coated with clinical grade Bone Morphogenetic Protein 2 and 6 (BMP) only or a BMP coated cell-seeded combination product. These implants were evaluated in 2 sheep models, a fresh 3 cm critical size tibial defect and a 4.5 cm biologically exhausted tibial defect. For the groups in which growth factors were applied, BMP-6 was chosen at a dose of 344 μg for 3 cm and 1.500 μg or 3.800 μg for 4.5 cm defects. An additional group in the 4.5 cm defect was tested using BMP-2 in a dose of 1.500 μg. For all the cell based implants autologous periosteum-derived cells were used which were cultured in monolayer during 6 weeks. For the fresh defect 408 million cells and for the biologically exhausted tibial defect 612 million cells were drop-seeded on the BMP coated scaffolds. Bone healing was studied during 16 weeks postimplantation, using standard radiographs. While fresh defects responded to all treatments, regardless the use of cells, the biologically hampered defects responded in half of the cases and only if the BMP-cell combination product was used, supporting the concept that cell-based therapies may become attractive in treating defects with a compromised biological status.

Approaches to promoting bone marrow mesenchymal stem cell osteogenesis on orthopedic implant surface

Bone marrow-derived mesenchymal stem cells (BMSCs) play a critical role in the osseointegration of bone and orthopedic implant. However, osseointegration between the Ti-based implants and the surrounding bone tissue must be improved due to titanium’s inherent defects. Surface modification stands out as a versatile technique to create instructive biomaterials that can actively direct stem cell fate. Here, we summarize the current approaches to promoting BMSC osteogenesis on the surface of titanium and its alloys. We will highlight the utilization of the unique properties of titanium and its alloys in promoting tissue regeneration, and discuss recent advances in understanding their role in regenerative medicine. We aim to provide a systematic and comprehensive review of approaches to promoting BMSC osteogenesis on the orthopedic implant surface.

Extracellular matrix-mimetic composite hydrogels of cross-linked hyaluronan and fibrillar collagen with tunable properties and ultrastructure

A platform of enzymatically-crosslinked Collagen/Tyramine hyaluronan derivative (Col/HA-Tyr) hydrogels with tunable compositions and gelation conditions was developed to evaluate the impact of the preparation conditions on their physical, chemical and biological properties. At low HA-Tyr content, hydrogels exhibited a fibrillar structure, with lower mechanical properties compared to pure Col hydrogels. At high HA-Tyr and Horse Radish Peroxydase (HRP) content, a microfibrillar network was formed beside the banded Col fibrils and a synergistic effect of the hybrid structure on mechanical properties was observed. These hydrogels were highly resistant against enzymatic degradation while keeping a high degree of hydration. Unlike HA-Tyr hydrogels, encapsulation of human dermal fibroblasts within Col/HA-Tyr hydrogels allowed for high cell viability. These results showed that high HA-Tyr and HRP concentrations are required to positively impact the physical properties of hydrogels while preserving collagen fibrils. Those Col/HA-Tyr hydrogels appear promising for novel tissue engineering applications following a biomimetic approach.

Safety and Localization of Mesenchymal Stromal Cells Derived from Human Adipose Tissue-Associated Hyaluronic Acid: A Preclinical Study

Millions of plastic surgeries are performed worldwide every year with the objective of correcting lipodystrophies stemming from lesions, tumor resections, birth defects, and AIDS-associated antiretroviral therapy. Besides that, a large number of clinical research have assessed the outcome of procedures that rely on combinations of dermal fillers and autologous cells. However, little is known about the safety of these combinations and the localization of the injected cells. The aim of this study was to test the toxicity of a solution containing 1% hyaluronic acid (HA) and adipose-derived stromal cells (ASCs) from the human adipose tissue and to assess the localization of the injected cells, with and without HA, labeled with technetium-99m. Rats received subcutaneous and intraperitoneal injections of a solution containing 1% HA/adipose-derived stromal cells isolated from the human fat tissue. The animals were then observed for up to forty-two days. The solution tested in this study did not result in systemic, biochemical, or anatomic alterations that could represent toxicity symptoms. The association of HA and ASCs labeled with technetium-99m remained at the site of the injection within a period of twenty-four hours, as demonstrated by a whole-body imaging software fusion of SPECT and CT. In conclusion, our study shows that the subcutaneous and intraperitoneal injection of HA associated with adipose-derived stromal cells (ASCs) is safe. The association of HA and ASCs did not induce local or systemic toxicity. Thus, the administration of volume equal to or less than 0.2 mL of the agent filler (1 × 10⁶ ASC+HA 1%) should be considered for subsequent studies and may be an alternative to dermal fillers due to the expected lasting effects.

Fluorescent Nanoclusters for Imaging of Cells/Stem Cells

Imaging of cancer cells and cancer stem cells (CSCs) plays an important role in studying cell biology and tracking cancer development and metastasis. There is a wide interest in targeting cancer cells using fluorescent nanoclusters (NCs) capped in protein due to excellent cell viability and photostability, one-step synthesis route, large Stokes shift, good aqueous stability, and easy functionalization capability with long lifetime. Since CD44 is a CSC marker as well as a transmembrane receptor for hyaluronic acid (HA) and many other extracellular matrix (ECM) components, in this protocol, a biocompatible platform was synthesized by conjugation of HA onto luminescent platinum nanoclusters (Pt NCs) in human hemoglobin (Hb) (Hb/Pt NCs). This bioplatform could be used for specific imaging via an efficient targeting of CD44-overexpressing cancer cells and cancer stem cells.

Objective analysis of volume restoration in atrophic acne scars and skin pores: a split study using human stem cell-conditioned media

Background: It is anticipated that the combined treatments of ablative laser and human stem cell-conditioned media produce the synergistic effects.Objectives: To investigated the effects of human stem cell-conditioned media (HSCM) as a post-procedural agent after fractional CO₂ laser procedure in patients with atrophic acne scars and skin pores. Method: Both cheeks of 15 subjects were treated with a fractional CO₂ laser. HSCM was randomly applied to one of the resurfacing sites (T) and normal saline was applied to the other site as a control (C). During the next six days, a solution containing 80% HSCM and hyaluronic acid (HA) was applied on the treated side (T) and HA alone was applied to the control side (C). Scar volume and erythema were objectively evaluated using an Antera 3D^® CS. Result: After two months, the scar volume was reduced by 23.5% (T) versus 15.0% (C) (p = .143) and the volume of the skin pores was reduced by 37.6% (T) versus 15.9% (C) (p = .006), while the erythema was increased by 2.8% (T) versus 3.1% (C) (p = .934). Atrophic scar and the skin pores in the HSCM-applied area improved by at least 15.0% after a single treatment session, suggesting better results compared with the control side.Conclusion: HSCM may augment the regenerative effects of fractional CO₂ laser.