Spectrophotometric determination of nitrite based on its catalytic effect on the reaction of nuclear fast red and potassium bromate

Combination of a methylene blue-iodide system with a smartphone-based portable colorimeter for the on-site determination of nitrite

On-site determination of nitrite using a novel colorimetric method based on bleaching the blue color of methylene-blue and image analysis.

Rapid and highly selective colorimetric detection of nitrite based on the catalytic-enhanced reaction of mimetic Au nanoparticle-CeO2 nanoparticle-graphene oxide hybrid nanozyme

The International Agency for Research cancer (IARC) has classified nitrite in Group 2A of probable carcinogens to human. Herein, we report on the rapid and selective colorimetric detection of nitrite using a chemically modified gold nanoparticle (AuNP)-cerium oxide (CeO₂) NP-anchored graphene oxide (GO) hybrid nanozyme in a catalytic colorimetric assay where nitrite acts as the main oxidant/target analyte and 3,3',5,5'-tetramethylbenzidine (TMB) as the substrate. CeO₂ NPs and GO were synthesized separately and incorporated in-situ, in a synthetic solution involving the chemical reduction of Au salt to AuNPs. The chemical modification process aided the adsorption of CeO₂ NPs and AuNPs on GO nanosheets, yielding a highly catalytic AuNP-CeO₂ NP@GO nanohybrid material. Under optimum experimental conditions, a novel colorimetric assay for nitrite recognition was constructed in which AuNP-CeO₂ NP@GO hybrid nanozyme catalysed the oxidation of TMB in the presence of nitrite prepared in a 2-(n-morpholino)ethanesulfonic acid-2-[bis(2-hydroxyethyl)amino]-2-(hydroxymethyl)propane-1,3-diol-tris(hydroxymethyl)aminomethane acetate (MES-BIS-TRIS-Trisma Ac)-citric acid buffer solution, pH 2. Nitrite was quantitatively detected in a concentration dependent manner from 100 μM to 5000 μM with a correlation coefficient of 0.9961 and a limit of detection of 4.6 μM. Selective detection of nitrite was confirmed by the generation of a unique green colour reaction upon nitrite interaction in the AuNP-CeO₂ NP@GO hybrid nanozyme redox cycle with TMB. None of the several tested metal ions and including H₂O₂ yielded a positive colour response, thus demonstrating the superior selectivity of the catalytic colorimetric assay for nitrite recognition. The AuNP-CeO₂ NP@GO hybrid nanozyme catalytic colorimetric assay was successfully applied in the detection of nitrite in tap water.

A review on spectroscopic methods for determination of nitrite and nitrate in environmental samples

Nitrate is an important pollutant found in environmental samples. Nitrate and nitrite pose various environmental as well as health hazards. Different methods of determining nitrate in various environmental samples developed during previous years include spectrophotometric, chemiluminescence, electrochemical detection, chromatographic, capillary electrophoretic, spectrofluorimetric methods. Out of these, methods based on spectroscopic detection of nitrate have been discussed in this review article due to their easy availability, high sensitivity, low detection limit, economical and facile nature. Methods based on spectrophotometry, Raman Spectroscopy, IR and FTIR Spectroscopy, atomic absorption spectroscopy (AAS), fluorescence spectroscopy, chemiluminescence, mass spectroscopy, molecular emission cavity analysis (MECA), electron paramagnetic resonance spectrometry (EPR) and nuclear magnetic resonance spectroscopy (NMR) have been reviewed. The basic principle, detection limits, detection range, RSD%, sample throughput/h, advantages and disadvantages have been discussed.

Spectrophotometric determination of nitrite in soil and water using cefixime and central composite design

The present paper seeks to develop a simple method for the spectrophotometric determination of nitrite in soil and water samples and also measure optimum reaction conditions along with other analytical parameters. The method is based on the diazotization-coupling reaction of nitrite with cefixime and 1-naphthylamine in an acidic solution (Griess reaction). The final product that is an azo dye has an orange color with maximum absorption at 360 nm which Beer's Law is obeyed over the concentration range 0.02-15.00 mg L(-1) of nitrite. Optimal conditions of the variables affecting the reaction were obtained by central composite design (CCD). A detection limit of 4.3×10(-3) mg L(-1) was obtained for determination of nitrite by the proposed method. The proposed method was successfully applied to determine nitrite in soil and water samples. The molar absorptivity of the product of the reaction and RSD in determination of nitrite in real samples are 4.1×10(3) (L mol(-1) cm(-1)) and lower than 10%, respectively.

A comparison between determination of trace amounts of sulfide in the presence and absence of micelle particles in natural waters (Qazvin, Iran): a kinetic spectrophotometric approach

A new sensitive kinetic spectrophotometric method described for the determination of trace amounts of sulfides based on the addition reaction of sulfide ions with malachite green has been investigated in aqueous and micellar media at 25 °C. The variables affecting the rate of the reaction were investigated, and the optimum conditions were established. Under the optimum experimental conditions, decreases in the absorbance of malachite green at 615 nm in the absence and 630 nm in the presence of micelle particles, their λ max, were proportional to the concentrations of sulfide ions at the first 15 and 25 s from initiation of the reaction. The working curve was linear over the concentration range 50-1200 ng mL(-1) of sulfide ions with a fixed time method at the first 15 and 25 s from initiation of the reaction in aqueous medium and 25-1750 ng mL(-1) with a fixed time method at the first 15 s and 25-1500 ng mL(-1) for primitive 25 s in micellar medium. For the proposed kinetic method, the experimental and theoretical limit of detection (LOD) and limit of quantification (LOQ) in the presence and absence of micelle particles were obtained and tabulated at Δt = 15 and 25 s. The effective range concentration was achieved from the plot of Ringbom in both media and reported. Different surfactants, such as nonionic surfactant (Triton-X100), anionic surfactant sodium dodecyl sulfate (SDS), and cationic surfactant cetyltrimethylammonium bromide (CTAB) and cetylpyridinium chloride (CPC), were investigated and Triton X-100 selected as a suitable surfactant. To valuable vision into the reaction pathways, pseudo-first-order condition was applied and different kinetic parameters like ΔG (≠), ΔE (≠), ΔS (≠), and ΔH (≠) computed. The 2:1 stoichiometry of malachite green to sulfide ions was indicated by the results of mole ratio and Job's method of continuous variation. The effect of different environments on the interfering of various ions on sulfide determination with the suggested method was studied, and final results have been presented. To investigate the usefulness of the different media of the proposed method, sulfide ions were determined in natural waters such as river and spring samples without any purification or using masking reagents.