Novel Broadband Cavity-Enhanced Absorption Spectrometer for Simultaneous Measurements of NO2 and Particulate Matter

A novel instrument based on broadband cavity-enhanced absorption spectroscopy has been developed using a supercontinuum broadband light source, which showcases its ability in simultaneous measurements of the concentration of NO₂ and the extinction of particulate matter. Side-by-side intercomparison was carried out with the reference NOx analyzer for NO₂ and OPC-N2 particle counter for particulate matter, which shows a good linear correlation with r² > 0.90. The measurement limits (1σ) of the developed instrument were experimentally determined to be 230 pptv in 40 s for NO₂ and 1.24 Mm^-1 for the extinction of particulate matter in 15 s. This work provides a promising method in simultaneously monitoring atmospheric gaseous compounds and particulate matter, which would further advance our understanding on gas-particle heterogeneous interactions in the context of climate change and air quality.

A New Photoacoustic Soot Spectrophone for Filter-Free Measurements of Black Carbon at 880 nm

A new photoacoustic soot spectrometer (PASS) operating at 880 nm was developed, for the first time, for filter-free measurements of black carbon (BC). The performance of the developed PASS was characterized and evaluated using a reference aethalometer AE51 on incense smoke in the air. An excellent correlation on the measurement of incense smoke was found between the two instruments in comparison with a regression coefficient of 0.99. A 1 σ detection limit of 0.8 µg m⁻³ was achieved for BC measurement at a time resolution of 1 s. It can be further reduced to 0.1 µg m⁻³, using a longer integration time of 1 min.

Confocal hyperspectral microscopic imager for the detection and classification of individual microalgae

We propose a confocal hyperspectral microscopic imager (CHMI) that can measure both transmission and fluorescent spectra of individual microalgae, as well as obtain classical transmission images and corresponding fluorescent hyperspectral images with a high signal-to-noise ratio. Thus, the system can realize precise identification, classification, and location of microalgae in a free or symbiosis state. The CHMI works in a staring state, with two imaging modes, a confocal fluorescence hyperspectral imaging (CFHI) mode and a transmission hyperspectral imaging (THI) mode. The imaging modes share the main light path, and thus obtained fluorescence and transmission hyperspectral images have point-to-point correspondence. In the CFHI mode, a confocal technology to eliminate image blurring caused by interference of axial points is included. The CHMI has excellent performance with spectral and spatial resolutions of 3 nm and 2 µm, respectively (using a 10× microscope objective magnification). To demonstrate the capacity and versatility of the CHMI, we report on demonstration experiments on four species of microalgae in free form as well as three species of jellyfish with symbiotic microalgae. In the microalgae species classification experiments, transmission and fluorescence spectra collected by the CHMI were preprocessed using principal component analysis (PCA), and a support vector machine (SVM) model or deep learning was then used for classification. The accuracy of the SVM model and deep learning method to distinguish one species of individual microalgae from another was found to be 96.25% and 98.34%, respectively. Also, the ability of the CHMI to analyze the concentration, species, and distribution differences of symbiotic microalgae in symbionts is furthermore demonstrated.

4D surface shape measurement system with high spectral resolution and great depth accuracy

A 4D surface shape measurement system that combines spectral detection and 3D surface morphology measurements is proposed, which can realize high spectral resolution and great depth accuracy (HSDA system). A starring hyperspectral imager system based on a grating generates precise spectral data, while a structured light stereovision system reconstructs target morphology as a 3D point cloud. The systems are coupled using a double light path module, which realize point-to-point correspondence of the systems' image planes. The spectral and 3D coordinate data are fused and transformed into a 4D data set. The HSDA system has excellent performance with a spectral resolution of 3 nm and depth accuracy of 27.5 μm. A range of 4D imaging experiments are presented to demonstrate the capabilities and versatility of the HSDA system, which show that it can be used in broad range of application areas, such as fluorescence detection, face anti-spoofing, physical health state assessment and green plant growth condition monitoring.

Classification, identification, and growth stage estimation of microalgae based on transmission hyperspectral microscopic imaging and machine learning

A transmission hyperspectral microscopic imager (THMI) that utilizes machine learning algorithms for hyperspectral detection of microalgae is presented. The THMI system has excellent performance with spatial and spectral resolutions of 4 µm and 3 nm, respectively. We performed hyperspectral imaging (HSI) of three species of microalgae to verify their absorption characteristics. Transmission spectra were analyzed using principal component analysis (PCA) and peak ratio algorithms for dimensionality reduction and feature extraction, and a support vector machine (SVM) model was used for classification. The average accuracy, sensitivity and specificity to distinguish one species from the other two species were found to be 94.4%, 94.4% and 97.2%, respectively. A species identification experiment for a group of mixed microalgae in solution demonstrates the usability of the classification method. Using a random forest (RF) model, the growth stage in a phaeocystis growth cycle cultivated under laboratory conditions was predicted with an accuracy of 98.1%, indicating the feasibility to evaluate the growth state of microalgae through their transmission spectra. Experimental results show that the THMI system has the capability for classification, identification and growth stage estimation of microalgae, with strong potential for in-situ marine environmental monitoring and early warning detection applications.

Multi-mode Microscopic Hyperspectral Imager for the Sensing of Biological Samples

In this work, we develop a multi-mode microscopic hyperspectral imager (MMHI) for the detection of biological samples in transmission imaging, reflection imaging and fluorescence mode. A hyperspectral image cube can be obtained with 5 μm spatial resolution and 3 nm spectral resolution through push-broom line scanning. To avoid possible shadows produced by the high magnification objective with a short working distance, two illumination patterns are designed to ensure the co-axiality of the illumination and detection. Three experiments for the detection of zebrafish and fingerprints and the classification of disaster-causing microalgae verify the good capability and functionality of the system. Based on the detected spectra, we can observe the impacts of β-carotene and melanin in zebrafish, hemoglobin in the fingertip, and chlorophyll in microalgae, respectively. Multi-modes can be switched freely according to the application requirement and characteristics of different samples, like transmission mode for the transparent/translucent sample, reflection mode for the opaque sample and fluorescence mode for the fluorescent sample. The MMHI system also has strong potential for the non-invasive and high-speed sensing of bio or clinical samples.