Accelerated aging effects on color, microhardness and microstructure of ICON resin infiltration

Evaluation of resin infiltration for inhibiting initial caries progression: An in vitro study using Micro-Computed Tomographic analysis

Objective

To evaluate the changes in lesion depth and mineral density of resin infiltration-treated white spot lesions against a simulated oral environment using thermal and acidic challenges in vitro.

Materials and methods

Two enamel slabs were prepared from each buccal surface of permanent human premolars, for a total of 56 slabs. Artificial white spot lesions were induced. One specimen was treated with resin infiltration, while the other was used as an untreated control. A micro-CT was used to assess the lesion depth and mineral density of each specimen. Subsequently, all specimens were subjected to 10,000 cycles of thermocycling and pH cycling for 10 days before being re-evaluated using the micro-CT. Lesion depth and mineral density were examined and compared between before and after aging procedures within each group by the paired sample t-test. The independent samples t-test was utilized to compare lesion depth progression and percentage change of mineral density between groups.

Results

After aging, there was both a significant lesion depth progression and a mineral loss in the control and resin infiltration groups. Mean lesion depth progression was 132.88 ± 4.18 µm for the control group and 52.31 ± 4.16 µm for resin infiltration group. Percentage mineral density loss as a percentage for the control and resin infiltration groups were 16.1 ± 0.64 % and 8.83 ± 0.30 %, respectively. The resin infiltration group demonstrated a significantly lower mean lesion depth progression and percentage changes in mineral loss compared to the control group.

Conclusions

The lesion depth and mineral density changes in the resin infiltrated-treated group were lower than untreated white spot lesions after aging procedures using thermal and acidic challenges.

Clinical significance

Resin infiltration is a promising approach to inhibit the progression of white spot lesions related to the initial stage of dental caries.

Novel dental resin infiltrant containing smart monomer dodecylmethylaminoethyl methacrylate

Objectives

White spot lesions (WSLs) are prevalent and often lead to aesthetic problems and progressive caries. The objectives of this study were to: (1) develop a novel resin infiltrant containing smart monomer dodecylmethylaminoethyl methacrylate (DMAEM) to inhibit WSLs, and (2) investigate the effects of DMAEM incorporation on cytotoxicity, mechanical properties, biofilm-inhibition and protection of enamel hardness for the first time.

Methods

DMAEM was synthesized using 1-bromododecane, 2-methylamino ethanol and methylmethacrylate. DMAEM with mass fractions of 0%, 1.25%, 2.5% and 5% were incorporated into a resin infiltant containing BisGMA and TEGDMA. Cytotoxicity, mechanical properties and antibacterial effects were tested. After resin infiltration, bovine enamel was demineralized with saliva biofilm acids, and enamel hardness was measured.

Result

DMAEM infiltration did not increase the cytotoxicity or compromise the physical properties when DMAEM mass fraction was below 5% (p > 0.05). Biofilm metabolic activity was reduced by 90%, and biofilm lactic acid production was reduced by 92%, via DMAEM (p < 0.05). Mutans streptococci biofilm CFU was reduced by 3 logs (p < 0.05). When demineralized in acid and then under biofilms, the infiltrant + 5% DMAEM group produced an enamel hardness (mean ± sd; n = 6) of 2.90 ± 0.06 GPa, much higher than 0.85 ± 0.12 GPa of the infiltrant + 0% DMAEM group (p < 0.05).

Significance

A novel resin infiltrant with excellent mechanical properties, biocompability, strong antibacterial activity and anti-demineralization effect was developed using DMAEM for the first time. The DMAEM resin infiltrant is promising for inhibiting WSLs, arresting early caries, and protecting enamel hardness.

A novel dental infiltration resin based on isosorbide-derived dimethacrylate with high biocompatibility, hydrolysis resistance, and antibacterial effect

Objectives: The available infiltration resin has raised biosafety and treatment stability concerns because of the cytotoxicity of the main component, TEGDMA, and its susceptibility to hydrolysis in the oral environment. This study aimed to develop a TEGDMA-free infiltration resin to overcome these drawbacks. Methods: Using the synthetic bioderived monomer bis(methacrylate) isosorbide (IBM) and the zwitterionic compound 2-methacryloyloxyethyl phosphorylcholine (MPC), a novel infiltrant IBMA was developed and preferentially selected. We investigated the performance of the IBMA resin regarding cytotoxicity, antibiofilm adhesion, and hydrolysis resistance and further verified its ability to restore the demineralized enamel and stability of the infiltrated area under artificial aging conditions. Results: Compared with the commercial TEGDMA-based infiltration resin ICON, IBMA not only demonstrated similar enamel morphologic and esthetic restorative effects in chalky lesions but also exhibited favorable cell viability, durable Streptococcus mutans UA159 biofilm-repellent performance, and higher enamel microhardness (204.0 ± 5.12 HV) of the infiltrated enamel. Specifically, because of the high crosslink density [(47.77 ± 5.76) ×103 mol/mm3] and low water sorption [12.79 ± 2.56 µg/mm3] of the polymer network, the IBMA resin was more resistant to hydrolysis than ICON, which prevents the disruption of the infiltrant's micropore-blocking effect after aging. Enamel lesions treated with IBMA demonstrated good color stability after the tea-staining challenge, which was significantly better than that in the ICON group. Conclusion: Based on these findings, the IBMA resin exhibits favorable cell viability, hydrolysis resistance, and biofilm-repellent properties, which alleviates the defects of traditional TEGDMA systems. Therefore, it is a better alternative for microinvasive treatment involving early caries and enamel whitish discoloration.

In vitro effect of resin infiltrant on resistance of sound enamel surfaces in permanent teeth to demineralization

OBJECTIVE

To investigate the effect of resin infiltrant on resistance of sound permanent enamel surfaces to demineralization.

METHOD

Eighty healthy premolars were sectioned to obtain enamel blocks from the buccal surface. Specimens with baseline surface microhardness values of 320-370 were selected. The experimental group were treated with resin infiltrant, while the control group was not. Specimens from each group were artificially demineralized and the surface microhardness values were measured again. Confocal laser scanning microscopy was used to measure the depth of demineralization and detect the penetration ability of the resin infiltrant. The specimens were subjected to a simulated toothbrushing abrasion test. Scanning electron microscopy was used to observe changes in the surface morphology of specimens after each of these procedures.

RESULTS

No significant differences between the experimental and control groups were observed in the baseline microhardness values or in the experimental group after resin infiltration compared with the baseline conditions. After artificial demineralization, the microhardness value in the control group was significantly lower than that in the experimental group (266.0 (±34.5) compared with 304.0 (±13.0), P = 0.017). Confocal laser scanning microscopy results showed that the demineralization depth in the control group was significantly deeper than that in the experimental group (97.9 (±22.8) µm vs. 50.4 (±14.3) µm, P < 0.001), and that resin infiltrant completely penetrated the acid-etched demineralized area of the tooth enamel with a mean penetration depth of 31.6 (±9.0) µm. Scanning electron microscopy showed that the surface morphology was more uniform and smoother after simulated toothbrushing. The enamel surface structure was more severely destroyed in the control group after artificial demineralization compared with that of the experimental group.

CONCLUSION

Resin infiltrant can completely penetrate an acid-etched demineralized enamel area and improve resistance of sound enamel surfaces to demineralization. Our findings provide an experimental basis for preventive application of resin infiltrant to sound enamel surfaces to protect tooth enamel against demineralization.

Development of New Experimental Dental Enamel Resin Infiltrants-Synthesis and Characterization

The aim of the present study was to obtain experimental infiltration materials, intended for the treatment of dental white spots, and to investigate them. Two series of infiltrants (P1–P6)/(P1F–P6F) were obtained, based on different monomer mixtures, without/with glass filler (with fluoride release ability). Each infiltrant from the second series contained the same amount of glass powder, and each infiltrant from the (P–PF) group contained the same resin composition. The characteristics of the experimental infiltrants were investigated by degree of conversion (DC), mechanical strength, water sorption (WS), and fluoride release, in addition to residual monomer for (P1F–P6F) infiltrants. The results were compared with those obtained for commercial Icon infiltrant. For the experimental infiltrants, without/with filler, the recorded DC was in the range of 58.27–89.70%/60.62–89.99%, compared with Icon (46.94%) 24 h after polymerization. The release of fluoride depends on the permeability of the polymer matrix, with respect to the water sorption, which may help to diffuse ions in the storage medium but which can also influence the release of residual monomers. The highest flexural strengths were recorded for the (TEGDMA/HEMA/Bis-GMA) infiltrants (133.94 ± 16.389 MPa/146.31 ± 7.032 MPa). The best experimental infiltrants were P2 and P2F (Bis-GMA/HEMA/TEGDMA).

Real-Time Monitoring and Quantitative Evaluation of Resin In-Filtrant Repairing Enamel White Spot Lesions Based on Optical Coherence Tomography

The aim of the present study was to explore the feasibility of real-time monitoring and quantitative guiding the repair of enamel white spot lesions (WSLs) with resin infiltration by optical coherence tomography (OCT). Seven New Zealand rabbits were treated with 37% phosphoric acid etchant for 15 min to establish the model of enamel demineralization chalk spots of upper incisors, which were repaired by Icon resin infiltrant. OCT, stereo microscope (SM) imaging, scanning electron microscope (SEM) imaging and hematoxylin eosin (HE) staining were used to image each operation step. The changes of WSLs of enamel before and in the process of restoration with resin infiltrant showed specific performance in OCT images, which were consistent with the corresponding results of stereomicroscope and SEM. OCT can non-invasively and accurately image the whole process of repairing enamel demineralization layer with resin infiltration real-time, which can effectively guide the clinical use of resin infiltrant to repair enamel WSLs and be used as an imaging tool to evaluate the process and effect of restoration with resin infiltrant at the same time.

Resin Infiltration in Dental Fluorosis Treatment-1-Year Follow-Up

Background and objective: Dental fluorosis is a disease affecting dental hard tissues featured with white or yellowish lesions. Several treatments are proposed in the literature, some even invasive. This clinical study aimed to evaluate the effectiveness of resin infiltration in terms of lesions resolution, trend of sensitive teeth and satisfaction of patients over time. Methods and material: 200 fluorosis lesions were treated using ICON infiltrating resin (DMG, Hamburg, Germany). Parameters related to patients were collected by a questionnaire and analyzed aesthetic dissatisfaction about lesions, Shiff Air Index Sensitive Scale, sensitive teeth after treatment, the satisfaction of duration of treatment. The same operator measured dimensions of lesions Tooth Surface Index of Fluorosis (TSIF) and numbers of etching cycles needed for treating lesions. Statistical analysis was performed. The follow-up was of 1-year a measurement were performed at baseline (t0), immediately after the treatment (t1) and every three months during the observation period. Results: All lesions disappeared after one treatment. Pain or sensitive teeth were reported inside the 72 h and they disappeared after. Statistical analysis showed highly statistically correlation between etching cycles and the dimension of lesions and TSIF at the time-points evaluated as well as for pain during treatment, whereas a statistical significance was not noticed where etching cycles were correlated to sensitive teeth after 72 h. Overall, the treatment was found to be statistically significantly associated with differences in answers of aesthetic dissatisfaction between t0 and t1 and those collected between t1 and t2. Between t2 and t3 and between t3 and t4 no statistical differences were found in answers of patients about dissatisfaction, indicating the stability of the results. Conclusions: The ICON resin infiltration technique was found to be effective in lesions resolution with steady results.

Low-Viscosity Resin Infiltration Efficacy on Postorthodontic White Spot Lesions: A Quantitative Light-Induced Fluorescence Evaluation

Objective

The aim of this in vivo study was to evaluate the efficacy of low-viscosity light-cured resin infiltration on postorthodontic white spot lesions (WSLs) on incipient and advanced lesions using quantitative light-induced fluorescence (QLF).

Methods

The study subjects were patients with clinically diagnosed postorthodontic WSLs (n=57). QLF images of the lesions were obtained using a QLF device (Inspektor-Pro, Amsterdam, The Netherlands) before any treatment. Images were processed using the built-in software (QLF patient v2.0.0.48), which produced fluorescence loss (ΔF¹), lesion area (Area¹), and impact (ΔF₁ x Area₁, ΔQ₁) values. Lesions were categorized as incipient (-5<ΔF₁<-12, n=14) or advanced (-12<ΔF₁<-25, n=43). They were then infiltrated with low-viscosity resin (Icon-DMG, Hamburg, Germany) according to the manufacturer's instructions. QLF imaging was repeated (ΔF₂, Area₂, and ΔQ₂) from the same aspects assured by the relative software. Kolmogorov-Smirnov, Wilcoxon, and Mann-Whitney tests were used for data evaluation.

Results

ΔF₁ (-8.40±0.73) and Area₁ (3.44±5.19) decreased to -6.58±0.88 and 0.18±0.33 for incipient lesions (p<0.001 and p=0.002, respectively). ΔF₁ (-13.20±5.32) and Area₁ (4.71±5.56) decreased to -7.51±2.7 and 0.29±1.86 for advanced lesions (p<0.001). When ΔF, lesion area, and ΔQ changes between the groups were compared, the decrease in ΔF was greater for advanced lesions (p<0.001), whereas the decrease in the lesion area and ΔQ was similar (p=0.690, p=0.291).

Conclusions

Infiltration treatment provides improvement of WSLs in terms of fluorescence loss, lesion area, and impact for both incipient and advanced lesions, with the latter group presenting higher fluorescence loss reduction.

Ex vivo investigation on internal tunnel approach/internal resin infiltration and external nanosilver-modified resin infiltration of proximal caries exceeding into dentin

This ex vivo proof-of-concept study aimed to investigate the effect of nanosilver particles (AgNP) added to a conventional infiltrant resin (Icon) on external penetration into natural proximal enamel caries exceeding into dentin after internal tunnel preparation and internal infiltration. Carious lesions (ICDAS codes 2/3) of extracted human (pre-)molars revealing proximal caries radiographically exceeding into dentin (E2/D1 lesions) were preselected. Then, 48 of those specimens showing demineralized areas transcending the enamel-dentin border as assessed by means of near-infrared light transillumination (DIAGNOcam) were deproteinized (NaOCl, 5%). Using an internal tunnel approach, occlusal cavities central to the marginal ridge were prepared. Excavation of carious dentin, total etch procedure (H3PO4, 40%), and internal resin infiltration (FITC-labeled) followed, along with final restorations (flowable composite resin). Outer lesion surfaces were etched (HCl, 15%) prior to external infiltration (RITC-labeled). Group 1 (control; n = 24) used non-modified infiltrant, while an infiltrant/AgNP mixture (20 nm; 5.5 wt%) was used with experimental Group 2 (n = 24). Non-infiltrated pores of cut lesions were stained (Berberine), and specimens were analyzed using confocal laser scanning microscopy. Compared to the non-filled infiltrant, incorporation of AgNP had no effect on the resin's external penetration. Between the groups, no significant differences regarding internal or external infiltration could be detected, and non-infiltrated lesion areas did not differ significantly (p>0.109; t-test). The internal tunnel preparation in combination with both an internal resin infiltration and an additional external infiltration approach using a nanosilver-modified infiltrant resin leads to increased infiltrated lesion areas, thus occluding and adhesively stabilizing the porous volume of the demineralized enamel. While exerting antimicrobial effects by the nanosilver particles, this approach should have the potential as a viable treatment alternative for proximal lesions extending into dentin, thus avoiding the sacrifice of sound enamel, postponing the frequently inevitable restoration/re-restoration cycle of conventional proximal caries treatment, and improving dental health.