Effects of different irrigating solutions and disinfection methods on push-out bond strengths of fiber posts

Influence of different intraradicular chemical pretreatments on the bond strength of adhesive interface between dentine and fiber post cements: A systematic review and network meta-analysis

Systematic review and network meta-analyses were performed to answer the question: Do intraradicular chemical pretreatments affect the bond strength of the adhesive interface between dentine and fiber post cements? A literature search was performed in PubMed, Scopus, Web of Science, LILACS, BBO, and Cochrane Library in October 2018 (updated September 2021). In vitro studies that compared the bond strength assessed by push-out tests following at least two dentine chemical treatments prior to fiber post cementation were included. Risk of bias was evaluated. A random-effects Bayesian-mixed treatment comparison model was used to compare push-out bond strength of different chemical pretreatments. SUCRA (surface area under the cumulative ranking) analysis was performed to rank the pretreatments. After removing duplicates and screening titles and abstracts, 61 studies remained. SUCRA analysis showed that the best bond strength values for self-etch, etch-and-rinse, and self-adhesive cements were ethyl acetate (SUCRA: 99.8%), low concentration NaOCl (SUCRA: 83.4%), and grape seed extract (SUCRA: 97.6%), respectively. According to the SUCRA rankings, ethanol was in a good position for all adhesive strategies (SUCRA: 78.6%). The use of chemical pretreatments in intraradicular dentine of endodontically treated teeth depends on the adhesive and cementation strategy. The pretreatment generally associated with the highest bond strength was ethanol.

Photodynamic therapy and gaseous ozone versus conventional post space treatment methods on the push-out bond strength of fiber posts luting with different resin cements

BACKGROUND

The aim of this study was to compare the push-out bond strength of fiber posts by using two different resin cement after the treatments of post space with photodynamic therapy, gaseous ozone and conventional disinfection solution.

METHODS

The root canal treatments of one hundred maxillary incisors were performed. The roots were randomly distributed into 5 groups (n = 20). NaOCl of 2.5% + EDTA of 17% in group 1, CHX of 2% in group 2, toluidine blue + diode laser as the photodynamic therapy (PDT) in group 3 and ozone in group 4 were applied to the post spaces. Group 5 was washed with distilled water as control group. Each group was divided into two subgroups according to the adhesive types and the posts were bonded by using RelyX and LinkForce. The bond strength was calculated using the push-out test method. Resin tag formations were photographed with SEM. The push-out bond strength was analyzed by ANOVA and Tukey tests (p = .05).

RESULTS

The PDT group, which showed the highest PBS among the groups bonded with LinkForce at all levels, was significantly higher than Ozone and DW groups (p<.05). NaOCl and ozone treatments provided the highest PBS among the groups bonded with RelyX for all levels and this difference was significant according to the DW group (p < .05).

CONCLUSION

Post space treatments improved the bond strength of the fiber post ​​in both types of resin cement.

Post-Space Treatment Influences the Bond Strength In Endodontically Treated Teeth: A Systematic Review and Meta-Analysis of In Vitro Studies

OBJECTIVES

This systematic review of in vitro studies investigated the influence of the post-space treatment used to remove the smear layer on the bond strength of the post to root canal dentin.

METHODS AND MATERIALS

In vitro studies included in this study were identified from PubMed/MEDLINE, Lilacs, and Scopus databases up until March 2019, without limits on publication year or language. Two reviewers independently selected the studies based on the inclusion and exclusion criteria, extracted the data, and evaluated the risk of bias of all studies. A random effects model was used for pairwise meta-analyses (control vs. post-space preparation groups) at a significance level of p<0.05.

RESULTS

Of the 2,832 potentially eligible studies, 453 studies were selected for full-text analysis, and 75 were included in this systematic review. Only one study was considered to have a low risk of bias. Overall, post-space treatment significantly improves the bond strength to root canal dentin (p<0.00001).

CONCLUSION

Post-space treatment has a positive influence on the bond strength of the post to root canal dentin. In this review, the post-space treatments that improve the adhesive resistance of the post were ethanol, sodium hypochlorite, and ethylene diamine tetra-acetic acid (NaOCl + EDTA), NaOCl + EDTA + ultrasound, erbium-doped yttrium aluminium garnet laser (Er:YAG laser), neodymium-doped yttrium aluminium garnet laser (Nd:YAG laser), and diode laser.

Impact of photodynamic therapy on the push-out bond strength of fiber posts to root dentin: A systematic review and meta-analysis

BACKGROUND AND PURPOSE

This systematic review documents the up-to-date evidence on the efficacy of photodynamic therapy (PDT) on the push-out bond strength of fiber posts cemented to root dentin.

MATERIALS AND METHODS

The focused PICO question was: "What impact does PDT have on the push-out bond strength of fiber posts cemented to root dentin?" This systematic review followed the guidelines and recommendations reported in the Preferred Reporting Items for Systematic Review and Meta-Analysis (PRISMA) guidelines chart. An electronic search was performed in MEDLINE/PubMed, SCOPUS, Web of Science, and Embase from January 1980 up to and including January 2020. Heterogeneity was calculated for push-out bond strength by means of the Chi-square test and I² statistics. For meta-analyses, if the I² was higher than 50 %, a random effects model was used, otherwise a fixed effects model for I² ≤50 % was applied. A p-value <0.05 was set for significant heterogeneity. Forest plots were computed reporting standard mean differences (SMD) of outcomes and 95 % confidence intervals (CI).

RESULTS

In total, ten studies were included, all of wich demonstrated medium risk of bias. All studies tested the push-out bond strength by means of a universal testing machine with applying a load ranging between 0.5 and 1 mm/min speed. Of the 10 studies, nine (90 %) indicated that PDT had no effect on push-out bond strength of fiber posts to root dentin. Only one study indicated that PDT significantly improved the bond strength when compared with other control groups. The overall mean difference for push out bond strength showed no statistically significant difference between PDT and the control group (SMD = -1.11 [-3.25, 1.02], Z=-1.02, p = 0.305).

CONCLUSION

This systematic review concludes that PDT has no effect on improving the push-out bond strength of fiber posts to root dentin.

Influence of silver nanoparticle solution on the mechanical properties of resin cements and intrarradicular dentin

This study evaluated the influence of silver nanoparticle on mechanical properties of the components of underlying dentin and resin cement in different regions of intraradicular dentin. Ninety extracted single-rooted human teeth were used in this study. After endodontic preparation, the teeth were divided into five groups, according to the irrigating agents: distilled water, 5.25% sodium hypochlorite, 25% polyacrylic acid, 2% chlorhexidine and 23 ppm silver nanoparticles dispersion. Then, the groups were divided in 3 subgroups (n = 6) according to the technique adopted for adhesive cementation: SUA group: Scotchbond Universal Adhesive + RelyX ARC; U200 group: RelyX U200; and MCE group: MaxCem Elite. The mechanical properties of hardness and elastic modulus were measured in resin cement and underlying dentin in ultra-micro hardness tester in different thirds of radicular dentin surface. Data were subjected to ANOVA and Fisher’s test (p = 0.05). In the underlying dentin, in general, there was no statistically significant difference in different thirds of intraradicular dentin according to the different solutions used. In the resin cements, higher hardness values were found, in general, for the cervical third. When silver nanoparticle solution was used, higher mechanical properties were generally obtained for resin cement for the SBU and U200 groups, with little or no changes in mechanical properties for the dentin. Silver nanoparticle application is a viable option for irrigation the intraradicular dentin previously through the cementation process of glass fiber posts. The mechanical properties are influenced by irrigant solutions used and the depth intraradical analyzed area.

Effect of ultrasonic and Nd: Yag laser activation on irrigants on the push-out bond strength of fiber post to the root canal

OBJECTIVE

This in vitro study aimed to compare the efficacy of irrigants using various irrigation activation methods to the push-out bond strengths of fiber post to root canal luted with self-adhesive resin cement (SARC).

METHODOLOGY

Forty-eight decoronated human canines were used. The specimens were divided into four groups corresponding with the post-space irrigation process and were treated as follows: distilled water (DW) (Control) group received 15 mL of DW; sodium hypochlorite (NaOCl)+ethylenediaminetetraacetic acid (EDTA) group was treated with 5 mL of 5.25% NaOCl, 5 mL of 17% EDTA, and 5 mL of DW; passive ultrasonic irrigation (PUI) group was treated with 5 mL of 5.25% NaOCl, 5 mL of 17% EDTA, and 5 mL of DW, and each irrigant was agitated with an ultrasonic file; and laser activated irrigation (LAI) group was treated with 5 mL of 5.25% NaOCl, 5 mL of 17% EDTA, and 5 mL of DW, and each irrigant was irradiated with Nd: YAG laser. Fiber posts were luted with SARC, and a push-out test was performed. Data was analyzed using one-way analysis of variance and Tukey HSD test.

RESULTS

The bond strength values for the groups obtained were as follows: Control (10.04 MPa), NaOCl+EDTA (11.07 MPa), PUI (11.85 MPa), and LAI (11.63 MPa). No statistically significant differences were found among all experimental groups (p>0.05). The coronal (12.66 MPa) and middle (11.63 MPa) root regions indicated a significantly higher bond strength compared with the apical (9.16 MPa) region (p<0.05).

CONCLUSIONS

Irrigant activation methods did not increase the bond strength of fiber post to canal.

Do Irrigation Solutions Influence the Bond Interface Between Glass Fiber Posts and Dentin?

Abstract The aim of this study was to evaluate the push-out bond strength and interface permeability of glass-fiber posts in different regions of post space (cervical, middle, and apical) submitted to different irrigation solutions. Ninety single-rooted human teeth were submitted to endodontic treatment and divided into five groups, according to irrigation solutions: distilled water, 5.25% NaOCl, 25% polyacrylic acid, 2% chlorhexidine, and 23 ppm Ag NP dispersion. Each group was divided in 3 subgroups (n=6) according to cementation: SBU: Adper Scotchbond Universal + RelyX ARC; U200: RelyX U200; MCE: MaxCem Elite. Bond strength and sealing ability were measured in different areas of post space. The data was subjected to ANOVA and Fisher’s test (a=0,05). The silver nanoparticle solution showed highest bond strength values and lowest interface permeability in all thirds analyzed for SBU group. In the U200 group, the highest bond strength values were found for sodium hypochlorite solution, with significant difference between this solution and polyacrylic acid. A decrease in bond strength values in cervical to apical direction was found for MCE group and the same behavior were found for others groups. Regarding interface permeability, use of silver nanoparticle solution resulted in lower values in cervical and apical thirds. There was a decrease in bond strength in cervical to apical direction. Different irrigation solutions and intraradicular depth influenced the bond strength and interface permeability of adhesive material to dentin substrate. Silver nanoparticle solution can effectively be used as an irrigation agent in post space prior to fiber post cementation process.

Adhesion performance of a universal adhesive in the root canal: Effect of etch-and-rinse vs. self-etch mode

PURPOSE

Universal adhesives are new systems that can be used in etch-and-rinse (ER) and self-etch (SE) modes. This in vitro study evaluated the bonding performance of a universal adhesive in ER mode and SE mode with two irrigants for luting fiber posts in the root canal.

MATERIALS AND METHODS

After separation of the roots from the crowns of 56 maxillary central incisors and endodontic treatment, 10-mm post space was prepared. The roots were divided into seven groups according to irrigant/adhesive protocol used for cementation of posts: 1) sodium hypochlorite (NaOCl) irrigant + acid etching + One-Step Plus, 2) NaOCl + Clearfil SE Bond (CSE) and 3) EDTA + CSE as controls; 4) NaOCl + All-Bond Universal (AB) in ER mode, 5) NaOCl + AB in SE mode, 6) EDTA + AB in SE mode, 7) distilled water + AB in SE mode. Posts were luted using Duo-link. The bonded roots were sectioned into microslices. After push-out bond strength (PBS) testing, data in MPa were analyzed with two-way ANOVA and Tukey test (α = 0.05).

RESULTS

PBS was significantly affected by irrigation/adhesive protocol and root region (P<0.05), with no significant interaction of these factors. PBS of ABU in ER mode with NaOCl and in SE mode with NaOCl or EDTA was comparable to that in the respective controls. The highest and lowest PBSs were recorded for ABU in the SE mode with EDTA (15.38 ± 4) and NaOCl (10.17 ± 3.5), respectively. PBS of AB in ER and SE modes was similar when distilled water was used in the SE mode.

CONCLUSION

Adhesive performance of AB in the ER mode was comparable to or different from the SE mode, depending on the irrigant used to prepare post space in SE approach. AB could behave as a reliable bonding for post cementation.

Effect of Chlorhexidine Treatment Prior to Fiber Post Cementation on Long-Term Resin Cement Bond Strength

The purpose of this study was to evaluate the push-out bond strength of two different adhesive cements (total etch and self-adhesive) for glass fiber post (GFP) cementation in simulated, long-term service (thermocycling) when the root canal is treated with chlorhexidine before cementation. One hundred twenty premolar specimens with a single root canal were selected, endodontically treated, and shaped for GFP cementation (n=120). The specimens were randomly placed into one of 12 groups (10 specimens each) according to cement (T = total-etch RelyX ARC or S = self-adhesive RelyX Unicem), treatment with chlorhexidine (N or Y: without or with), and number of thermal cycles (00, 20, or 40: 0, or 20,000 or 40,000 cycles): 1. TN00, 2. TN20, 3. TN40, 4. TY00, 5. TY20, 6. TY40, 7. SN00, 8. SN20, 9. SN40, 10. SY00, 11. SY20, 12. SY40. The root of each specimen was cut perpendicular to the vertical axis, yielding six 1.0 mm-thick sections. A push-out bond strength test was performed followed by statistical analysis using a factorial analysis of variance. Pairwise comparisons of significant factor interactions were adjusted using the Tukey test. Significant differences of push-out bond strengths were found in the four main effects (resin cement [ p<0.0001], treatment with chlorhexidine [ p<0.0001], number of cycles [ p<0.0001], and root third [ p<0.0001]) and all interactions ( p<0.05 for all). Both resin cements produced higher bond strength in the cervical third followed by the middle third, and lower values were detected in the apical third. Additionally, the results suggest that the use of an additional disinfection treatment with chlorhexidine before the cement application produced the highest push-out bond strength regardless of root third. Further, the thermocycling simulation decreased the bond strength for both resin cements long-term when the chlorhexidine was not applied before cementation. However, when the root canal was treated with chlorhexidine and the fiber post was cemented with self-adhesive cement, the bond strength increased after 0, 20,000 and 40,000 cycles.