Age- and sex-related growth patterns of the craniofacial complex in European children aged 3–6 years

Application of 3-Dimensional White-Light Scanning to Observe the Lip and Nose Morphology of Chinese Children

OBJECTIVE

To establish a database and study the growth and development of Chinese children's nasolabial units by 3-dimensional (3D) white-light scanning technology.

MATERIALS AND METHODS

From January 2018 to January 2019, 528 patients were selected preoperatively in our hospital, without cranial or maxillofacial deformities. The patients were placed in supine positions in a state of sedation, and the authors used a 3D white-light scanner to scan the children's faces to measure the 3D morphological structure of their nasolabial areas. The results were presented with Graphpad Prism 8.0.2 to explore correlations and analyze trends.

RESULTS

The selected Chinese children consisted of 356 males (67.4%) and 172 females (32.6%). All nasolabial subunits grew fastest at 0 to 2 years old and at a slower rate from 2 to 15 years old, whereas the relevant growth of different sex was similar among contemporaries.

CONCLUSIONS

Three-dimensional white-light scanning can quickly and accurately gain 3D imaging of nasolabial soft tissue to build a normal morphology database. Furthermore, every nasolabial subunit grows fastest at the age of 0 to 2 years.

Sexual dimorphism in human midfacial growth patterns from newborn to 5 years old based on computed tomography

Recent studies have supported the presence and varying nature of craniofacial sexual dimorphism (SD) from the very first stages of ontogeny. But the exact patterns of between-sex differences during the first years of life remain obscure despite the importance of these data for craniofacial surgery treatment and forensic studies. Our study employs a large dataset of clinical computed tomography scans of individuals of East Slavonic descent from birth to 5 years of age (247 males and 184 females) to address the pattern of age-related between-sex differences in 22 linear measurements of the mid-face. At birth, SD of most dimensions is low, but it increases significantly during the first year of life. The level of SD of most variables fluctuates in both directions during the second year and peaks during the third and fourth years of life. During the sixth year, SD of about half of the variables markedly decreases. In adults, SD of all variables increases, but to a very different extent: from 2% to 13%. Most sexually dimorphic features of the facial skeleton begin to develop early in postnatal ontogeny and then may or may not become accentuated during puberty. Importantly, the patterns of age changes in the level of SD differ strongly between various dimensions, and so cannot be expressed by a single value for the whole face. Additionally, the level of SD for a particular variable is not ontogenetically stable during the first years of life.

Difference in cochlear length between male and female patients

Objective: To compare cochlear duct length (CDL) between male and female patients by evaluating the diameter of the basal turn (distance A) on CT scans.Method: All temporal bone CT scans performed between 2014 and 2020 were reviewed in our medical center. Using multiplanar reconstructions, the length A, which is the greatest distance of the basal turn was measured on both sides. We performed an analysis of variance considering two factors: sex and side. Two different physicians carried out the measurements, an otolaryngologist and a neuroradiologist. The patients who had several CT scans allowed us to evaluate the reliability of our procedure.Results: Among the 888 CT scans reviewed, 8 were excluded because of cochlear malformations. The inter-sex difference of length A was found to be 0.29 millimeters(mm) 95% IC [0.26-0.34] and was longer in the male group (p < 0.0001). Using Alexiades' equation, we found that CDL was 34.5mm [34.37-34.61] in the male group and 33.3mm [33.13-33.38] in the female group. When one side was compared to the other, there was no significant difference (p = 0.226). An intra-class correlation found a good absolute agreement between the two screeners of 0.79.Conclusion: Males have a statistically significant longer CDL than females.

Longitudinal composite 3D faces and facial growth trends in children 6-11 years of age using 3D cephalometric surface imaging

BACKGROUND

Normative craniofacial anthropometry provides clinically important reference values used in the treatment of craniofacial conditions. Few objective datasets of normative data exist for children.

AIM

To establish normative data regarding craniofacial morphology changes with growth in children.

SUBJECTS AND METHODS

3D surface images of the same group of healthy children aged 6 - 11 years old recruited from a Dallas school were taken annually between the years 2015 - 2020. Composite 3D cephalometric faces were created for boys and girls of each age. General and craniofacial anthropometric measurements were compared.

RESULTS

Seven hundred ninety one individual stereophotogrammetric acquisitions were used (400 boys, 391 girls) taken from 180 children. Linear facial, orbital, nasal, and oral anthropometric measurements revealed a consistent increase in magnitude with age. Composite 3D face comparisons revealed prominent vertical and anteroposterior growth trends in the lower and upper facial regions.

CONCLUSION

This study presents a longitudinal 3D control dataset of the same group of children over a 6-year period that can serve as reference norms for facial growth values and trends in children aged 6-11 years. The composite 3D normative faces are available for clinical and research purposes upon request, which may be interrogated and measured according to user need and preference.

Evaluation of Mandibular Growth and Symmetry in Child with Congenital Zygomatic-Coronoid Ankylosis

Ankyloses in the area of the temporomandibular joint (TMJ) are mentioned as a potential etiological factor of mandibular growth disorders and facial asymmetry. The aim of this case study was to evaluate the changes in the mandible of a child with zygomatic-coronoid ankylosis during the first five years of life, in which two adhesion release procedures were performed. The adopted symmetrical approach is based on the assumption of symmetry of the structure of the stomatognathic system in relation to the sagittal median plane. However, the assessment of pathological changes in the structure of the skeletal system was performed using an asymmetrical approach. Computed tomography techniques and a system of computer-aided diagnosis (CAD) were used in the case study. During the child’s growth, linear and angular measurements were made thrice (at the age of 16, 25 and 54 months). The degree of asymmetry was estimated in the measurements made on the right and left sides of the three-dimensional mandible. Unilateral congenital hypoplasia of the articular process and zygomatic-coronoid adhesion caused asymmetrical growth of the mandible in the child along with shortening of the mandibular branch and body on the damaged side and a visible difference in the size of the mandibular angles. Removal of the adhesions during surgical procedures made it possible to reduce the asymmetry of the mandible and catch-up growth, although at the age of five, the mandible was still smaller than the mandible in healthy peers. It was shown that the early adhesion release procedures supported by the CAD analysis enabled the restoration of mandibular symmetry.

Three-dimensional mixed longitudinal study of facial growth changes and variability of facial form in preschool children using stereophotogrammetry

OBJECTIVES

Since the normal, non-pathological facial growth in preschool children is not sufficiently reported, the aim was to follow growth changes of facial surface, sex differences and facial variability in preschool children using 3D stereophotogrammetry.

SETTINGS AND SAMPLE POPULATION

Mixed longitudinal sample of healthy Caucasian preschool children without head and facial trauma or craniofacial anomalies from 3.4 to 6.7 years of age consisted of 25 girls and 17 boys.

MATERIALS AND METHODS

136 3D facial models from optical scanner Vectra 3D were evaluated by geometric morphometrics (CPC-DCA, PCA, per-vertex t test).

RESULTS

In both sexes, the lower face was widened and elongated, and the prominences of the superciliary arches, lower orbital region, nose, lips and chin increased. Facial surface increments were more even in girls with a maximum between the fourth and fifth year of age, while in boys, there was the most intensive growth between fifth and sixth year of age. Sexual dimorphism was very stable during investigated period, only less statistically significant at the age of 3 years. Boys had more prominent lateral lower part of forehead, nose and lips than girls in every age category.

CONCLUSIONS

The longitudinal growth of the face between third and sixth year of age was similar in both sexes, facial sex differences were found in terms of intensity, size and timing. Variability of facial form showed that boys' faces were larger on average and facial shape did not differ. The knowledge of facial growth is essential for diagnostics and clinical practice.

Sub-clustering in skeletal class III malocclusion phenotypes via principal component analysis in a southern European population

The main aim of this study was to generate an adequate sub-phenotypic clustering model of class III skeletal malocclusion in an adult population of southern European origin. The study design was conducted in two phases, a preliminary cross-sectional study and a subsequent discriminatory evaluation by main component and cluster analysis to identify differentiated skeletal sub-groups with differentiated phenotypic characteristics. Radiometric data from 699 adult patients of southern European origin were analyzed in 212 selected subjects affected by class III skeletal malocclusion. The varimax rotation was used with Kaiser normalization, to prevent variables with more explanatory capacity from affecting the rotation. A total of 21,624 radiographic measurements were obtained as part of the cluster model generation, using a total set of 55 skeletal variables for the subsequent analysis of the major component and cluster analyses. Ten main axes were generated representing 92.7% of the total variation. Three main components represented 58.5%, with particular sagittal and vertical variables acting as major descriptors. Post hoc phenotypic clustering retrieved six clusters: C1:9.9%, C2:18.9%, C3:33%, C4:3.77%, C5:16%, and C6:16%. In conclusion, phenotypic variation was found in the southern European skeletal class III population, demonstrating the existence of phenotypic variations between identified clusters in different ethnic groups.

Safe zones of the maxillary alveolar bone in Down syndrome for orthodontic miniscrew placement assessed with cone-beam computed tomography

The aim of this study was to quantify the available maxillary alveolar bone in a group of individuals with Down syndrome (DS) to determine the best areas for orthodontic miniscrew placement. The study group consisted of 40 patients with DS aged 12-30 years. We also selected an age and sex-matched control group. All measurements were performed on cross-sectional images obtained with cone-beam computed tomography. The selected areas of interest were the 4 interradicular spaces between the distal wall of the canine and the mesial wall of the second molar, in both maxillary quadrants. We measured the vestibular-palatine (VP) and mesiodistal (MD) dimensions to depths of 3, 6 and 9 mm from the alveolar ridge. We also measured the bone density in the same interradicular spaces of interest to 6 mm of depth from the alveolar crest. VP measurements were longer in the more posterior sectors and as the distance from the alveolar ridge increased. MD measurements also increased progressively as the distance from the alveolar ridge increased. In general, both the VP and MD measurements in the DS group were similar among the male and female participants. As age increased, the MD distance increased, while the VP distance decreased. The VP distance was ≥6 mm in at least 75% of the DS group in practically all assessed interdental spaces. The MD distance was ≥2 mm in at least 75% of the DS group only between the first and second molar, to 9 mm of depth from the alveolar ridge. The safe area for inserting orthodontic miniscrews in DS patients is restricted to the most posterior and deepest area of the maxillary alveolar bone.

Anthropometric Analysis on the Ocular Region Morphology of Children and Young Adults in Chinese Han Population

PURPOSE

The periocular features vary in different age groups and ethnic populations. In this study, the authors sought to determine whether age-related differences exist for certain periocular parameters between children and young adults of Chinese Han population.

METHODS

OU of 310 children (aged 7-10 years) and 301 young adults (aged 20-30 years) were evaluated by 2-dimensional photogrammetry. All the subjects were of Chinese Han population. The eyelid crease profiles were classified according to their morphology. Periocular measurements, including 11 linear and 3 angular parameters were acquired from standardized photographs, 3 indices were further derived. The presence of epicanthal fold was also recorded. Each of the parameters was compared between the age groups.

RESULTS

A statistical difference was found between the 2 age groups for the distribution of eyelid crease types. Statistical significances existed between the age groups for various parameters, these include palpebral fissure height and width, margin reflex distance, intercanthal and outercanthal width, distance from the medial end of the eyebrow to the medial canthus, distance from the lateral end of the brow to the lateral canthus, crease height and eyebrow height, angle of endocanthion and exocanthion, palpebral fissure inclination, palpebrae fissure index, canthal index, and angular index (p < 0.05). The incidence of epicanthal fold tended to decrease with increase of age.

CONCLUSIONS

Age differences exist in periocular features between children and young adults of Chinese Han population. Standards of periocular measurements based on age and race could provide reliable guidelines for clinical examination and planning periocular surgery.

Subclustering in Skeletal Class III Phenotypes of Different Ethnic Origins: A Systematic Review

OBJECTIVE

We aimed to systematically review articles investigating the efficiency of the clustering of skeletal class III malocclusion phenotypic subtypes of different ethnic origins as a diagnostic tool.

METHODS

The review protocol was structured in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses statement and registered in Prospero (CRD42016053865). A survey of articles published up to March 2018 investigating the identification of different subgroups of skeletal class III malocclusion via cluster analysis was performed using 11 electronic databases. Any type of study design that addressed the classification of subclusters of class III malocclusion was considered. The Newcastle-Ottawa scale for cohort and cross-sectional (modified) studies was used for quality assessment.

RESULTS

The final selection included 7 studies that met all the criteria for eligibility (% overall agreement 0.889, free marginal kappa 0.778). All studies identified at least 3 different types of class III clusters (ranging from 3 to 14 clusters; the total variation of the prevalence of each cluster ranged from 0.2% to 36.0%). The main shared variables used to describe the more prevalent clusters in the studies included were vertical measurements (Ar-Go-Me: 117.51°-135.8°); sagittal measurements: maxilla (SNA: 75.3°-82.95°), mandible (SNB: 77.03°-85.0°). With regard to ethnicity, a mean number of 8.5 and 3.5 clusters of class III were retrieved for Asian and Caucasian population, respectively.

CONCLUSIONS

The total number of clusters identified varied from 3 to 14 to explain all the variability in the phenotype class III malocclusions. Although each extreme may be too simple or complex to facilitate an exhaustive but useful classification for clinical use, a classification system including 4 to 7 clusters may prove to be efficient for clinical use in conjunction with complete and meticulous subgrouping.

CLINICAL SIGNIFICANCE

The identification and description of a subclustering classification system may constitute an additional step toward more precise orthodontic/orthopedic diagnosis and treatment of skeletal class III malocclusion.

Maxillary sinuses and midface in patients with cleidocranial dysostosis

The cleidocranial dysplasia is general skeletal disorder with an autosomal dominant inheritance. It is manifested by many craniofacial abnormalities, of which the maxillary hypoplasia is the most evident. The aim of the study was to use CBCT to evaluate the volume of the maxillary sinuses and the dimensions of maxillae in patients with CCD and compare them with healthy individuals. Files of four children with cleidocranial dysplasia were investigated. Volume of every maxillary sinus as well as two dimensional measurements of distances between particular points of interest located on surface of maxilla were calculated from reconstructed CBCT examination. Data were compared with a control group. Statistical analysis was performed. Linear and volumetric data obtained using CBCT was collected and compared with a control group. All affected children had both maxillary sinus volume and maxillary dimensions smaller than control values. The maxillary sinuses were underdeveloped up to half of normal values. The largest differences were recorded in vertical linear dimensions of the maxillae. Horizontal dimensions were also lower. There are morphological modifications of bone tissue which accompany CCD. It seems that these changes occur on the midfacial region and to a greater extent concern the maxillary sinus volume.

Combined soft and skeletal tissue modelling of normal and dysmorphic midface postnatal development

BACKGROUND

Midface hypoplasia as exemplified by Treacher Collins Syndrome (TCS) can impair appearance and function. Reconstruction involves multiple invasive surgeries with variable long-term outcomes. This study aims to describe normal and dysmorphic midface postnatal development through combined modelling of skeletal and soft tissues and to develop a surgical evaluation tool.

MATERIALS AND METHODS

Midface skeletal and soft tissue surfaces were extracted from computed tomography scans of 52 control and 14 TCS children, then analysed using dense surface modelling. The model was used to describe midface growth, morphology, and asymmetry, then evaluate postoperative outcomes.

RESULTS

Parameters responsible for the greatest variation in midface size and shape showed differences between TCS and controls with close alignment between skeletal and soft tissue models. TCS children exhibited midface dysmorphology and hypoplasia when compared with controls. Asymmetry was also significantly higher in TCS midfaces. Combined modelling was used to evaluate the impact of surgery in one TCS individual who showed normalisation immediately after surgery but reversion towards TCS dysmorphology after 1 year.

CONCLUSION

This is the first quantitative analysis of postnatal midface development using combined modelling of skeletal and soft tissues. We also provide an approach for evaluation of surgical outcomes, laying the foundations for future development of a preoperative planning tool.