Structural characterization and mechanical properties of dextrin-graft-poly(butyl acrylate-co-styrene) copolymers

Chemical, Radiometric and Mechanical Characterization of Commercial Polymeric Films for Greenhouse Applications

In the agricultural sector, companies involved in the production of plastic greenhouses are currently searching for a suitable covering adapted for every climate in the world. For this purpose, this research work has determined the chemical, radiometric and mechanical properties of 53 polymeric films samples from Europe and South America. The chemical tests carried out with these samples were elemental analysis (C, H and N) and FT-IR spectrometry. The radiometric properties here studied were the transmission, absorption and reflection coefficients along the spectrum between 300 and 1100 nm. For the mechanical properties, tensile strength, tear strength and dart impact strength, tests were carried out. Finally, all these data were collected, and a multivariate statistical analysis was carried out using the SPSS statistical to group the samples into statistical groups adapted to specific climatic regions. The elemental analysis and FT-IR spectrometry allowed group the samples into nine groups. The samples were grouped according to their chemical (elemental analysis), radiometric and mechanical properties by multivariate analysis. The dendrogram separated five very different groups in terms of number of samples. These groups have specific chemical, radiometric and mechanical characteristics that separate them from the rest. These groups make it possible to narrow down the applications and correlate with the radiometric properties to see in which geographical area of the world they are most effective in increasing yields and achieving higher quality production.

Mechanical properties of polymeric biomaterials: Modified ePTFE using gamma irradiation

Evaluating the mechanical properties of expanded polytetrafluoroethylene (ePTFE) is essential to measure its resistance to permanent deformation from an applied force. These mechanical ePTFE properties must be comparable to the properties of real tissue. Various hydrophilic comonomers 2-hydroxyethyl methacrylate (HEMA), N-isopropylacrylamide (NIPAAM), and N-vinylcaprolactam were used individually for copolymerization with acrylic acid (AA) to be grafted onto ePTFE using the gamma irradiation-induced grafting method. After surface modification, the hydrophobic and mechanical properties of ePTFE were altered. The water uptake and contact angle measurement showed that the modified ePTFE was less hydrophobic (∼500%, θ < 90°) than the unmodified ePTFE (0%, θ = 140°). Moreover, the mechanical properties of ePTFE changed after the modification process due to the polymer grafted onto the ePTFE surface. The data from mechanical tests, such as Young’s modulus (74–121 MPa), ultimate tensile strength (5–9 MPa), and elongation at break (56–121%), obtained for the sample AA-co-HEMA and AA-co-NIPAAM remain within the ranges and are considered desirable for use as a biomaterial. The mechanical strength correlates well with the percentage of the grafting yield after the modification process and is dependent on the parameters used, such as irradiation dose and type of comonomer.

A one pot one step combined radical and ring-opening route for the dual functionalization of starch in aqueous medium

Starch based materials are attractive bio-based alternative to fully synthetic polymers. Native starch has however limited thermoprocessability and properties and must be modified. In order to improve the properties of starch-graft-poly(butyl-acrylate-co-styrene) copolymers via a process as green as possible, we report herein a new method for the dual functionalization of the polysaccharide via a one pot one step reaction in aqueous medium combining free radical polymerizations and ring-opening chemistry. Poly(butyl acrylate) or poly(butyl acrylate-co-styrene) (ca. 60 000 g/mol) and oligo(ε-caprolactone) were grafted on starch with a grafting percentage up to 75 %. The copolymers show two glass transition temperatures: one around 55-60 °C related to starch and a second attributed to the grafted vinyl polymers, from -46 °C to 20 °C depending on butyl acrylate/styrene ratio. The resulting dual functionalized materials exhibit excellent mechanical properties, with elongation at break in the range 20-210 %, while single functionalized starch shows less than 5 %.

Biodegradable Blends of Grafted Dextrin with PLGA-block-PEG Copolymer as a Carrier for Controlled Release of Herbicides into Soil

The presented work aimed to test influence of poly(L-lactide-co-glycolide)-block-poly (ethylene oxide) copolymer modification by blending with grafted dextrin or maltodextrin on the course of degradation in soil and the usefulness of such material as a matrix in the controlled release of herbicides. The modification should be to obtain homogenous blends with better susceptibility to enzymatic degradation. Among all tested blends, which were proposed as a carrier for potential use in the controlled release of plant protection agents, PLGA-block-PEG copolymer blended with grafted dextrin yielded very promising results for their future applications, and what is very importantly proposed formulations provide herbicides in unchanged form into soil within few months of release. The modification PLAGA/PEG copolymer by blending with modificated dextrins affects the improvement of the release profile. The weekly release rates for both selected herbicides (metazachlor and pendimethalin) were constant for a period of 12 weeks. Enzymatic degradation of modified dextrin combined with leaching of the degradation products into medium caused significant erosion of the polymer matrix, thereby leading to acceleration of water diffusion into the polymer matrix and allowing for easier leaching of herbicides outside the matrix.

Synthesis and Characterization of a Lignin-Styrene-Butyl Acrylate Based Composite

In recent years, the pursuit of new polymer materials based on renewable raw materials has been intensified with the aim of reusing waste materials in sustainable processes. The synthesis of a lignin, styrene, and butyl acrylate based composite was carried out by a mass polymerization process. A series of four composites were prepared by varying the amount of lignin in 5, 10, 15, and 20 wt.% keeping the content of butyl acrylate constant (14 wt.%). FTIR and SEM revealed that the -OH functional groups of lignin reacted with styrene, which was observed by the incorporation of lignin in the copolymer. Additionally, DSC analysis showed that the increment in lignin loading in the composite had a positive influence on thermal stability. Likewise, Shore D hardness assays exhibited an increase from 25 to 69 when 5 and 20 wt.% lignin was used respectively. In this same sense, the contact angle (water) measurement showed that the LEBA15 and LEBA20 composites presented hydrophobic properties (whit contact angle above 90°) despite having the highest amount of lignin, demonstrating that the interaction of the polymer chains with the -OH groups of lignin was the main mechanism in the composites interaction.