Unconventional hcp/fcc Nickel Heteronanocrystal with Asymmetric Convex Sites Boosts Hydrogen Oxidation

Developing non-platinum group metal catalysts for the sluggish hydrogen oxidation reaction (HOR) is critical for alkaline fuel cells. To date, Ni-based materials are the most promising candidates but still suffer from insufficient performance. Herein, we report an unconventional hcp/fcc Ni (u-hcp/fcc Ni) heteronanocrystal with multiple epitaxial hcp/fcc heterointerfaces and coherent twin boundaries, generating rugged surfaces with plenty of asymmetric convex sites. Systematic analyses discover that such convex sites enable the adsorption of *H in unusual bridge positions with weakened binding energy, circumventing the over-strong *H adsorption on traditional hollow positions, and simultaneously stabilizing interfacial *H2O. It thus synergistically optimizes the HOR thermodynamic process as well as reduces the kinetic barrier of the rate-determining Volmer step. Consequently, the developed u-hcp/fcc Ni exhibits the top-rank alkaline HOR activity with a mass activity of 40.6 mA mgNi -1 (6.3 times higher than fcc Ni control) together with superior stability and high CO-tolerance. These results provide a paradigm for designing high-performance catalysts by shifting the adsorption state of intermediates through configuring surface sites.

Advancing Catalysts by Stacking Fault Defects for Enhanced Hydrogen Production: A Review

Green hydrogen, derived from water splitting powered by renewable energy such as solar and wind energy, provides a zero-emission solution crucial for revolutionizing hydrogen production and decarbonizing industries. Catalysts, particularly those utilizing defect engineering involving the strategical introduction of atomic-level imperfections, play a vital role in reducing energy requirements and enabling a more sustainable transition toward a hydrogen-based economy. Stacking fault (SF) defects play an important role in enhancing the electrocatalytic processes by reshaping surface reactivity, increasing active sites, improving reactants/product diffusion, and regulating electronic structure due to their dense generation ability and profound impact on catalyst properties. This review explores SF in metal-based materials, covering synthetic methods for the intentional introduction of SF and their applications in hydrogen production, including oxygen evolution reaction, photo- and electrocatalytic hydrogen evolution reaction, overall water splitting, and various other electrocatalytic processes such as oxygen reduction reaction, nitrate reduction reaction, and carbon dioxide reduction reaction. Finally, this review addresses the challenges associated with SF-based catalysts, emphasizing the importance of a detailed understanding of the properties of SF-based catalysts to optimize their electrocatalytic performance. It provides a comprehensive overview of their various applications in electrocatalytic processes, providing valuable insights for advancing sustainable energy technologies.

Ultrafast micro/nano-manufacturing of metastable materials for energy

The structural engineering of metastable nanomaterials with abundant defects has attracted much attention in energy-related fields. The high-temperature shock (HTS) technique, as a rapidly developing and advanced synthesis strategy, offers significant potential for the rational design and fabrication of high-quality nanocatalysts in an ultrafast, scalable, controllable and eco-friendly way. In this review, we provide an overview of various metastable micro- and nanomaterials synthesized via HTS, including single metallic and bimetallic nanostructures, high entropy alloys, metal compounds (e.g. metal oxides) and carbon nanomaterials. Note that HTS provides a new research dimension for nanostructures, i.e. kinetic modulation. Furthermore, we summarize the application of HTS-as supporting films for transmission electron microscopy grids-in the structural engineering of 2D materials, which is vital for the direct imaging of metastable materials. Finally, we discuss the potential future applications of high-throughput and liquid-phase HTS strategies for non-equilibrium micro/nano-manufacturing beyond energy-related fields. It is believed that this emerging research field will bring new opportunities to the development of nanoscience and nanotechnology in both fundamental and practical aspects.

Shuttling Active Elements in and out of Ultrathin Nanowires: Toward Rational Design of Multicomponent Catalysts

One-dimensional nanostructures, with a high ratio of surface-bulk atoms, find applications as active catalysts. Here, we report tunability in ultrathin single-crystalline AuPdPt nanowires by modifying synthesis conditions and postsynthetic treatment in a controlled ambient atmosphere. The surface microstructure modification of these nanostructures has been analyzed by integrating the results of three crucial techniques including Z-contrast HAADF-STEM imaging, X-ray photoelectron spectroscopy, and electrochemically active surface area from cyclic voltammograms.

Au Doping PtNi Nanodendrites for Enhanced Electrocatalytic Methanol Oxidation Reaction

To boost the electrocatalytic methanol oxidation reaction (MOR) of Platinum (Pt), making binary PtM (M = transition metals, for example, Fe, Cu, and Ni) with specific morphology is known as a promising method. Although great progress has been made in the synthesis of shaped PtM catalysts toward MOR, enhancing the catalytic performance of the PtM to enable it to be commercialized is still a hotspot. In this work, the Au-doped PtNi dendritic nanoparticles (Au-PtNi DNPs) were obtained by doping a small amount of gold (Au) into initially prepared PtNi DNPs, greatly improving their MOR catalytic activity and durability. The energy-dispersive X-ray spectroscopy mapping (EDXS) indicates that the surface of DNPs is mainly composed of Au dopant and PtNi, while the core is mainly Pt, indicating the formation of Au-doped PtNi/Pt core-shell-like DNP structures. The electrocatalytic performance of the prepared Au-PtNi DNPs with different compositions for the MOR was evaluated using cyclic voltammetry, chronoamperometry, and CO-stripping tests. The experimental findings indicate that the Au-PtNi DNPs showed better MOR performance in comparison with PtNi DNPs and commercial Pt catalysts. Among all the catalysts, 6% Au-PtNi DNPs showed 4.3 times improved mass catalytic activity for the MOR in comparison with commercial Pt catalysts. In addition, all the prepared Au-PtNi DNPs display a remarkable CO tolerance compared to that of PtNi DNPs and commercial Pt catalysts. The dendritic structure of Au-PtNi DNPs can effectively enhance catalytic performance, combined with the electronic effect of Au, Pt, and Ni.

Synthesis of Pd3 Sn and PdCuSn Nanorods with L12 Phase for Highly Efficient Electrocatalytic Ethanol Oxidation

The crystal phase of nanomaterials is one of the key parameters determining their physicochemical properties and performance in various applications. However, it still remains a great challenge to synthesize nanomaterials with different crystal phases while maintaining the same composition, size, and morphology. Here, a facile, one-pot, wet-chemical method is reported to synthesize Pd₃ Sn nanorods with comparable size and morphology but different crystal phases, that is, an ordered intermetallic and a disordered alloy with L1₂ and face-centered cubic (fcc) phases, respectively. The crystal phase of the as-synthesized Pd₃ Sn nanorods is easily tuned by altering the types of tin precursors and solvents. Moreover, the approach can also be used to synthesize ternary PdCuSn nanorods with the L1₂ crystal phase. When used as electrocatalysts, the L1₂ Pd₃ Sn nanorods exhibit superior electrocatalytic performance toward the ethanol oxidation reaction (EOR) compared to their fcc counterpart. Impressively, compared to the L1₂ Pd₃ Sn nanorods, the ternary L1₂ PdCuSn nanorods exhibit more enhanced electrocatalytic performance toward the EOR, yielding a high mass current density up to 6.22 A mg_Pd ^-1 , which is superior to the commercial Pd/C catalyst and among the best reported Pd-based EOR electrocatalysts.

Atomic-level ablation of Au@Ag NRs using ultrafast laser excitation

Metallic nanorods (NRs) are an important class of materials with widespread applications because of their appealing tunable plasmon resonances, high photothermal conversion efficiency, and chemical stability. It is essential to control the shape and atomic structures of metallic NRs for practical applications. Laser processing of metallic NRs relying on light-matter interactions provides many opportunities. However, the atomic-level fabrication of NRs remains a challenge, and the understanding of laser-induced ablation is still limited. Here, we proposed the atomic-level ablation of Au@Ag NRs using ultrafast laser excitation, which suggests that the near-field effect plays a key role in comparison with thermal evaporation. Through ultrafast laser pulse excitation, abundant atomic steps are fabricated in Au@Ag NRs, which can enhance the surface activity. We suggest that this study highlights the role of the laser near-field effect and also provides a facile strategy to tailor the external shape of metallic NRs at the atomic level, opening a pathway to design metallic NRs for energy and environmental applications.

Sub-Monolayer YOx /MoOx on Ultrathin Pt Nanowires Boosts Alcohol Oxidation Electrocatalysis

A crucial issue restricting the application of direct alcohol fuel cells (DAFCs) is the low activity of Pt-based electrocatalysts for alcohol oxidation reaction caused by the reaction intermediate (CO*) poisoning. Herein, a new strategy is demonstrated for making a class of sub-monolayer YO_x /MoO_x -surface co-decorated ultrathin platinum nanowires (YO_x /MoO_x -Pt NWs) to effectively eliminate the CO poisoning for enhancing methanol oxidation electrocatalysis. By adjusting the amounts of YO_x and MoO_x decorated on the surface of ultrathin Pt NWs, the optimized 22% YO_x /MoO_x -Pt NWs achieve a high specific activity of 3.35 mA cm^-2 and a mass activity of 2.10 A mg_Pt ^-1 , as well as the enhanced stability. In situ Fourier transform infrared (FTIR) spectroscopy and CO stripping studies confirm the contribution of YO_x and MoO_x to anti-CO poisoning ability of the NWs. Density functional theory (DFT) calculations further reveal that the surface Y and Mo atoms with oxidation states allow COOH* to bind the surface through both the carbon and oxygen atoms, which can lower the free energy barriers for the oxidation of CO* into COOH*. The optimal NWs also show the superior activities toward the electro-oxidation of ethanol, ethylene glycol, and glycerol.

Ultrafast Laser-Induced Atomic Structure Transformation of Au Nanoparticles with Improved Surface Activity

Metallic nanoparticles (NPs) play a significant role in nanocatalytic systems, which are important for clean energy conversion, storage, and utilization. Laser fabrication of metallic NPs relying on light-matter interactions provides many opportunities. It is essential to study the atomic structure transformation of nonactive monocrystalline metallic NPs for practical applications. The high-density stacking faults were fabricated in monocrystalline Au NPs through tuning the ultrafast laser-induced relaxation dynamics, and the thermal and dynamic stress effects on the atomic structure transformation were revealed. The atomic structure transformation mainly arises from the thermal effect, and the dynamic stress distribution induced by local energy deposition gives rise to the generation of stacking faults. Au NPs with abundant stacking faults show enhanced surface activity owing to their low coordination number. We suggest that this work expands the knowledge of laser-metallic nanomaterial interactions and provides a method for designing metallic NPs for a wide range of applications.

Dislocation-Strained IrNi Alloy Nanoparticles Driven by Thermal Shock for the Hydrogen Evolution Reaction

Designing high-performance and low-cost electrocatalysts is crucial for the electrochemical production of hydrogen. Dislocation-strained IrNi nanoparticles loaded on a carbon nanotube sponge (DSIrNi@CNTS) driven by unsteady thermal shock in an extreme environment are reported here as a highly efficient hydrogen evolution reaction (HER) catalyst. Experimental results demonstrate that numerous dislocations are kinetically trapped in self-assembled IrNi nanoparticles due to the ultrafast quenching and different atomic radii, which can induce strain effects into the IrNi nanoparticles. Such strain-induced high-energy surface structures arising from bulk defects (dislocations), are more likely to be resistant to surface restructuring during catalysis. The catalyst exhibits outstanding HER activity with only 17 mV overpotential to achieve 10 mA cm^-2 in an alkaline electrolyte with fabulous stability, exceeding state-of-the-art Pt/C catalysts. These density functional theory results demonstrate that the electronic structure of as-synthesized IrNi nanostructure can be optimized by the strain effects induced by the dislocations, and the free energy of HER can be tuned toward the optimal region.