New Method for Combined Quantitative Assessment of Air-Trapping and Emphysema on Chest Computed Tomography in Chronic Obstructive Pulmonary Disease: Comparison with Parametric Response Mapping

Capturing COPD heterogeneity: anomaly detection and parametric response mapping comparison for phenotyping on chest computed tomography

Background

Chronic obstructive pulmonary disease (COPD) poses a substantial global health burden, demanding advanced diagnostic tools for early detection and accurate phenotyping. In this line, this study seeks to enhance COPD characterization on chest computed tomography (CT) by comparing the spatial and quantitative relationships between traditional parametric response mapping (PRM) and a novel self-supervised anomaly detection approach, and to unveil potential additional insights into the dynamic transitional stages of COPD.

Methods

Non-contrast inspiratory and expiratory CT of 1,310 never-smoker and GOLD 0 individuals and COPD patients (GOLD 1-4) from the COPDGene dataset were retrospectively evaluated. A novel self-supervised anomaly detection approach was applied to quantify lung abnormalities associated with COPD, as regional deviations. These regional anomaly scores were qualitatively and quantitatively compared, per GOLD class, to PRM volumes (emphysema: PRMEmph, functional small-airway disease: PRMfSAD) and to a Principal Component Analysis (PCA) and Clustering, applied on the self-supervised latent space. Its relationships to pulmonary function tests (PFTs) were also evaluated.

Results

Initial t-Distributed Stochastic Neighbor Embedding (t-SNE) visualization of the self-supervised latent space highlighted distinct spatial patterns, revealing clear separations between regions with and without emphysema and air trapping. Four stable clusters were identified among this latent space by the PCA and Cluster Analysis. As the GOLD stage increased, PRMEmph, PRMfSAD, anomaly score, and Cluster 3 volumes exhibited escalating trends, contrasting with a decline in Cluster 2. The patient-wise anomaly scores significantly differed across GOLD stages (p < 0.01), except for never-smokers and GOLD 0 patients. In contrast, PRMEmph, PRMfSAD, and cluster classes showed fewer significant differences. Pearson correlation coefficients revealed moderate anomaly score correlations to PFTs (0.41-0.68), except for the functional residual capacity and smoking duration. The anomaly score was correlated with PRMEmph (r = 0.66, p < 0.01) and PRMfSAD (r = 0.61, p < 0.01). Anomaly scores significantly improved fitting of PRM-adjusted multivariate models for predicting clinical parameters (p < 0.001). Bland-Altman plots revealed that volume agreement between PRM-derived volumes and clusters was not constant across the range of measurements.

Conclusion

Our study highlights the synergistic utility of the anomaly detection approach and traditional PRM in capturing the nuanced heterogeneity of COPD. The observed disparities in spatial patterns, cluster dynamics, and correlations with PFTs underscore the distinct - yet complementary - strengths of these methods. Integrating anomaly detection and PRM offers a promising avenue for understanding of COPD pathophysiology, potentially informing more tailored diagnostic and intervention approaches to improve patient outcomes.

Development of machine learning model to predict pulmonary function with low-dose CT-derived parameter response mapping in a community-based chest screening cohort

PURPOSE

To construct and evaluate the performance of a machine learning-based low dose computed tomography (LDCT)-derived parametric response mapping (PRM) model for predicting pulmonary function test (PFT) results.

MATERIALS AND METHODS

A total of 615 subjects from a community-based screening population (40-74 years old) with PFT parameters, including the ratio of the first second forced expiratory volume to forced vital capacity (FEV1/FVC), the percentage of forced expiratory volume in the one second predicted (FEV1%), and registered inspiration-to-expiration chest CT scanning were enrolled retrospectively. Subjects were classified into a normal, high risk, and COPD group based on PFT. Data of 72 PRM-derived quantitative parameters were collected, including volume and volume percentage of emphysema, functional-small airways disease, and normal lung tissue. A machine-learning with random forest regression model and a multilayer perceptron (MLP) model were constructed and tested on PFT prediction, which was followed by evaluation of classification performance based on the PFT predictions.

RESULTS

The machine-learning model based on PRM parameters showed better performance for predicting PFT than MLP, with a coefficient of determination (R2 ) of 0.749 and 0.792 for FEV1/FVC and FEV1%, respectively. The Mean Squared Errors (MSE) for FEV1/FVC and FEV1% are 0.0030 and 0.0097 for the random forest model, respectively. The Root Mean Squared Errors (RMSE) for FEV1/FVC and FEV1% are 0.055 and 0.098, respectively. The sensitivity, specificity, and accuracy for differentiating between the normal group and high-risk group were 34/40 (85%), 65/72 (90%), and 99/112 (88%), respectively. For differentiating between the non-COPD group and COPD group, the sensitivity, specificity, and accuracy were 8/9 (89%), 112/112 (100%), 120/121 (99%), respectively.

CONCLUSIONS

The machine learning-based random forest model predicts PFT results in a community screening population based on PRM, and it identifies high risk COPD from normal populations with high sensitivity and reliably predicts of high-risk COPD.

Computer-assisted evaluation of small airway disease in CT scans of Iran-Iraq war victims of chemical warfare by a locally developed software: comparison between different quantitative methods

OBJECTIVE

Diagnosis of small airway disease on computed tomography (CT) scans is challenging in patients with a history of chemical warfare exposure. We developed a software package based on different methodologies to identify and quantify small airway disease in CT images. The primary aim was to identify the best automatic methodology for detecting small airway disease in CT scans of Iran-Iraq War victims of chemical warfare.

METHODS

This retrospective case-control study enrolled 46 patients with a history of chemical warfare exposure and 27 controls with inspiratory/expiratory (I/E) CT scans and spirometry tests. Image data were automatically segmented, and inspiratory images were registered into the expiratory images' frame using the locally developed software. Parametric response mapping (PRM) and air trapping index (ATI) mapping were performed on the CT images. Conventional QCT methods, including expiratory/inspiratory mean lung attenuation (E/I MLA) ratio, normal density E/I (ND E/I) MLA ratio, attenuation volume Index (AVI), %low attenuation areas (LAA) < -856 in exhale scans, and %LAA < -950 in inhale scans were also computed. QCT measurements were correlated with spirometry results and compared across the two study groups.

RESULTS

The correlation analysis showed a significant negative relationship between three air trapping (AT) measurements (PRM, ATI, and %LAAExp < -856) and spirometry parameters (Fev1, Fvc, Fev1/Fvc, and MMEF). Moreover, %LAAExp < -856 had the highest significant negative correlation with Fev1/Fvc (r = -0.643, P-value < 0.001). Three AT measurements demonstrated a significant difference between the study groups. The E/I ratio was also significantly different between the two groups (P-value < 0.001). Binary logistic regression models showed PRMFsad, %LAAExp < -856, and ATI as significant and strong predictors of the study outcome. Optimal cut-points for PRMFsad = 19%, %LAAExp < -856 = 23%, and ATI = 27% were identified to classify the participants into two groups with high accuracy.

CONCLUSION

QCT methods, including PRM, ATI, and %LAAExp < -856 can greatly advance the identification and quantification of SAD in chemical warfare victims. The results should be verified in well-designed prospective studies involving a large population.

Quantitative Imaging Metrics for the Assessment of Pulmonary Pathophysiology: An Official American Thoracic Society and Fleischner Society Joint Workshop Report

Multiple thoracic imaging modalities have been developed to link structure to function in the diagnosis and monitoring of lung disease. Volumetric computed tomography (CT) renders three-dimensional maps of lung structures and may be combined with positron emission tomography (PET) to obtain dynamic physiological data. Magnetic resonance imaging (MRI) using ultrashort-echo time (UTE) sequences has improved signal detection from lung parenchyma; contrast agents are used to deduce airway function, ventilation-perfusion-diffusion, and mechanics. Proton MRI can measure regional ventilation-perfusion ratio. Quantitative imaging (QI)-derived endpoints have been developed to identify structure-function phenotypes, including air-blood-tissue volume partition, bronchovascular remodeling, emphysema, fibrosis, and textural patterns indicating architectural alteration. Coregistered landmarks on paired images obtained at different lung volumes are used to infer airway caliber, air trapping, gas and blood transport, compliance, and deformation. This document summarizes fundamental "good practice" stereological principles in QI study design and analysis; evaluates technical capabilities and limitations of common imaging modalities; and assesses major QI endpoints regarding underlying assumptions and limitations, ability to detect and stratify heterogeneous, overlapping pathophysiology, and monitor disease progression and therapeutic response, correlated with and complementary to, functional indices. The goal is to promote unbiased quantification and interpretation of in vivo imaging data, compare metrics obtained using different QI modalities to ensure accurate and reproducible metric derivation, and avoid misrepresentation of inferred physiological processes. The role of imaging-based computational modeling in advancing these goals is emphasized. Fundamental principles outlined herein are critical for all forms of QI irrespective of acquisition modality or disease entity.

A Computer-based Analysis for Identification and Quantification of Small Airway Disease in Lung Computed Tomography Images: A Comprehensive Review for Radiologists

Computed tomography (CT) imaging is being increasingly used in clinical practice for detailed characterization of lung diseases. Respiratory diseases involve various components of the lung, including the small airways. Evaluation of small airway disease on CT images is challenging as the airways cannot be visualized directly by a CT scanner. Small airway disease can manifest as pulmonary air trapping (AT). Although AT may be sometimes seen as mosaic attenuation on expiratory CT images, it is difficult to identify diffuse AT visually. Computer technology advances over the past decades have provided methods for objective quantification of small airway disease on CT images. Quantitative CT (QCT) methods are being rapidly developed to quantify underlying lung diseases with greater precision than subjective visual assessment of CT images. A growing body of evidence suggests that QCT methods can be practical tools in the clinical setting to identify and quantify abnormal regions of the lung accurately and reproducibly. This review aimed to describe the available methods for the identification and quantification of small airway disease on CT images and to discuss the challenges of implementing QCT metrics in clinical care for patients with small airway disease.

Artificial Intelligence in Lung Imaging

Recently, interest and advances in artificial intelligence (AI) including deep learning for medical images have surged. As imaging plays a major role in the assessment of pulmonary diseases, various AI algorithms have been developed for chest imaging. Some of these have been approved by governments and are now commercially available in the marketplace. In the field of chest radiology, there are various tasks and purposes that are suitable for AI: initial evaluation/triage of certain diseases, detection and diagnosis, quantitative assessment of disease severity and monitoring, and prediction for decision support. While AI is a powerful technology that can be applied to medical imaging and is expected to improve our current clinical practice, some obstacles must be addressed for the successful implementation of AI in workflows. Understanding and becoming familiar with the current status and potential clinical applications of AI in chest imaging, as well as remaining challenges, would be essential for radiologists and clinicians in the era of AI. This review introduces the potential clinical applications of AI in chest imaging and also discusses the challenges for the implementation of AI in daily clinical practice and future directions in chest imaging.

CT-Based Commercial Software Applications: Improving Patient Care Through Accurate COPD Subtyping

Chronic obstructive pulmonary disease (COPD) is heterogenous in its clinical manifestations and disease progression. Patients often have disease courses that are difficult to predict with readily available data, such as lung function testing. The ability to better classify COPD into well-defined groups will allow researchers and clinicians to tailor novel therapies, monitor their effects, and improve patient-centered outcomes. Different modalities of assessing these COPD phenotypes are actively being studied, and an area of great promise includes the use of quantitative computed tomography (QCT) techniques focused on key features such as airway anatomy, lung density, and vascular morphology. Over the last few decades, companies around the world have commercialized automated CT software packages that have proven immensely useful in these endeavors. This article reviews the key features of several commercial platforms, including the technologies they are based on, the metrics they can generate, and their clinical correlations and applications. While such tools are increasingly being used in research and clinical settings, they have yet to be consistently adopted for diagnostic work-up and treatment planning, and their full potential remains to be explored.