Recent Advances in Multifunctional Mechanical-Chemical Superhydrophobic Materials

Research Progress in the Construction Strategy and Application of Superhydrophobic Wood

Wood serves as a green biomass material with sustainable utilization and environmental friendliness. The modification of wood can be used to obtain superhydrophobic properties and further expand wood's application range. This paper focuses on the development status of superhydrophobic surfaces with micro-/nanoscale rough structures. Based on the surface wettability theory, this paper introduces common methods of superhydrophobic modification of wood materials, compares the advantages and disadvantages of these methods, discusses the relationship between the surface microstructure and wettability, and summarizes the applications of superhydrophobic wood in oil-water separation, self-cleaning, and self-healing. Finally, the future development strategies of superhydrophobic coating materials are elucidated to provide basic theoretical support for the synthesis and diverse applications of superhydrophobic wood and a reference for subsequent research and development.

Robust special wettability materials for oil-water separation: Mechanisms and strategies

Special wettability materials have been favored by researchers in recent years, and have played a great role in a variety of fields such as fog water collection, anti-fog, anti-icing, self-cleaning, etc. Especially in the field of oil-water separation, the frequent occurrence of offshore oil spills has seriously endangered the ecological environment. Inspired by nature, researchers have developed and manufactured a lot of bionic special wettability materials, which are expected to be effective in oil-water separation and solve the problem. However, the inherent fragility of these materials significantly limits their practical applications. There is an urgent need to fabricate special wettability materials with excellent mechanical and chemical stability through appropriate surface structure and composition design. In this review, the wettability theory and failure mechanisms of special wettability materials used for oil-water separation are reviewed, followed by a summary of test methods used to characterize durability. Methods to improve the durability of materials in recent years are described. Firstly, starting from the substrate material, the appropriate substrate material is selected according to the working environment. Secondly, micro/nano hierarchical structures can enhance the robustness and durability of materials. For coating-type materials, strengthening the bond between the substrate material and the coating is a common and effective strategy. Chemical bonds can be formed between them, and the binder can also be introduced. Moreover, endowing the material with self-healing properties is also an efficient approach. The final section summarizes the challenges in this field and offers an outlook, with the expectation of enabling large-scale, real-world applications.

Tunable Lotus Leaf Effect by Three-Dimensionally Printed Stretchable Objects

Adjustable wettability is important for various fields, such as droplet manipulation and controlled surface adhesion. Herein, we present high-resolution 3D stretchable structures with tunable superhydrophobicity, fabricated by a stereolithography-based printing process. The printing compositions comprise nonfluorinated monomers based on silicone urethane with dispersed hydrophobic silica particles. 3D lotus-like structures were designed and printed, having microsize pillars located at the external surfaces, with controlled dimensions and interspacing. The design of the pillars and the presence of the hydrophobic silica particles resulted in superhydrophobicity due to the surface structuring and entrapment of air between the pillars. The best structures display a contact angle of 153.3° ± 1.3° and rolling angle of 3.3° ± 0.5°, and their self-cleaning, water repellency, and buoyancy are demonstrated. The durability of the structure over time, water immersion, and heat exposure were tested, confirming the preservation of superhydrophobicity under these conditions. Upon stretching the surfaces, the interpillar distances change, thus enabling tuning the wetting properties and achieving good control over the contact and rolling angles, while the stretching-induced superhydrophobicity is reversible. This approach can expand the potential applications of superhydrophobic soft materials to fields requiring control over the wetting properties, including soft robotics, biomedical devices, and stretchable electronics.

Hierarchical Structure with Microcrater Covered with Nanograss Enhancing Condensation and Its Antifrosting/Anti-Icing Performance Inspired by Euphorbia helioscopia L

Over an extended period of evolution and natural selection, a multitude of species developed a diverse array of biological interface features with specific functions. These biological structures provide a rich source of inspiration for the design of bionic structures on superhydrophobic surfaces. Understanding the functional mechanism of plant leaves is of paramount importance for the advancement of new engineering materials and the further promotion of engineering applications of bionic research. The hierarchical structure of microcrater-covered nanograss (MCNG) on the surface of E. helioscopia L. leaf provided the inspiration for the bionic MCNG surface, which was successfully prepared on a copper substrate by hybrid laser micromachining technology and chemical etching. The combined action of texture structure and surface chemistry resulted in a contact angle of 169° ± 1° for MCNG surface droplets and a rolling angle of less than 1°. Notably, the condensation-induced adhesion force does not augment with the increase of the temperature difference, which facilitated the shedding of hot droplets from the surface. The microscope observation revealed a high density of condensed droplets on the MCNG surface and the tangible jumping behavior of the droplets. The fabricated MCNG also demonstrated excellent antifrost/anti-icing abilities in low-temperature and high-humidity environments. Finally, the study confirmed the exceptional mechanical durability and reusability of the MCNG surface through various tests, including scratch damage, sandpaper wear, water flow impact and flushing, and condensation-drying cycle tests. The nanograss can be effectively protected within the microcrater structure. This research presents a promising approach for preventing and/or removing unwanted droplets in numerous engineering applications.

Trifolium repens L.-Like Periodic Micronano Structured Superhydrophobic Surface with Ultralow Ice Adhesion for Efficient Anti-Icing/Deicing

Wind turbine blades are often covered with ice and snow, which inevitably reduces their power generation efficiency and lifetime. Recently, a superhydrophobic surface has attracted widespread attention due to its potential values in anti-icing/deicing. However, the superhydrophobic surface can easily transition from Cassie-Baxter to Wenzel at low temperature, limiting its wide applications. Herein, inspired by the excellent water resistance and cold tolerance of Trifolium repens L. endowed by its micronano structure and low surface energy, a fresh structure was prepared by combining femtosecond laser processing technology and a boiling water treatment method. The prepared icephobic surface aluminum alloy (ISAl) mainly consists of a periodic microcrater array, nonuniform microclusters, and irregular nanosheets. This three-scale structure greatly promotes the stability of the Cassie-Baxter state. The critical Laplace pressure of ISAl is up to 1437 Pa, and the apparent water contact angle (CA) is higher than 150° at 0 °C. Those two factors contribute to its excellent anti-icing and deicing performances. The results show that the static icing delay time reaches 2577 s, and the ice adhesion strength is only 1.60 kPa. Furthermore, the anti-icing and deicing abilities of the proposed ISAl were examined under the environment of low temperature and high relative humidity to demonstrate its effectiveness. The dynamic anti-icing time of ISAl in extreme environments is up to 5 h, and ice can quickly fall with a speed of 34 r/min when it is in a horizontal rotational motion. Finally, ISAl has excellent reusability and mechanical durability, with the ice adhesion strength still being less than 6 kPa and the CA greater than 150° after 15 cycles of icing-deicing tests. The proposed structure would offer a promising strategy for the efficient anti-icing and deicing of wind turbine blades.

Porous polydimethylsiloxane films with specific surface wettability but distinct regular physical structures fabricated by 3D printing

Porous polydimethylsiloxane (PDMS) films with special surface wettability have potential applications in the biomedical, environmental, and structural mechanical fields. However, preparing porous PDMS films with a regular surface pattern using conventional methods, such as chemical foaming or physical pore formation, is challenging. In this study, porous PDMS films with a regular surface pattern are designed and prepared using 3D printing to ensure the formation of controllable and regular physical structures. First, the effect of the surface wettability of glass substrates with different surface energies (commercial hydrophilic glass and hydrophobic glass (F-glass) obtained by treating regular glass with 1H,1H,2H,2H-perfluorooctyl-trichlorosilane) on the structural characteristics of the 3D printed PDMS filaments is investigated systematically. Additionally, the effect of the printing speed and the surface wettability of the glass substrate on the PDMS filament morphology is investigated synchronously. Next, using the F-glass substrate and an optimized printing speed, the effects of the number of printed layers on both the morphologies of the individual PDMS filaments and porous PDMS films, and the surface wettability of the films are studied. This study reveals that regularly patterned porous PDMS films with distinct structural designs but the same controllable surface wettability, such as anisotropic surface wettability and superhydrophobicity, can be easily fabricated through 3D printing. This study provides a new method for fabricating porous PDMS films with a specific surface wettability, which can potentially expand the application of porous PDMS films.

A versatile "3M" methodology to obtain superhydrophobic PDMS-based materials for antifouling applications

Fouling, including inorganic, organic, bio-, and composite fouling seriously affects our daily life. To reduce these effects, antifouling strategies including fouling resistance, release, and degrading, have been proposed. Superhydrophobicity, the most widely used characteristic for antifouling that relies on surface wettability, can provide surfaces with antifouling abilities owing to its fouling resistance and/or release effects. PDMS shows valuable and wide applications in many fields, and due to the inherent hydrophobicity, superhydrophobicity can be achieved simply by roughening the surface of pure PDMS or its composites. In this review, we propose a versatile "3M" methodology (materials, methods, and morphologies) to guide the fabrication of superhydrophobic PDMS-based materials for antifouling applications. Regarding materials, pure PDMS, PDMS with nanoparticles, and PDMS with other materials were introduced. The available methods are discussed based on the different materials. Materials based on PDMS with nanoparticles (zero-, one-, two-, and three-dimensional nanoparticles) are discussed systematically as typical examples with different morphologies. Carefully selected materials, methods, and morphologies were reviewed in this paper, which is expected to be a helpful reference for future research on superhydrophobic PDMS-based materials for antifouling applications.