Development of Structure-Switching Aptamers for Kanamycin Detection Based on Fluorescence Resonance Energy Transfer

Recent Advances of Fluorescent Aptasensors for the Detection of Antibiotics in Food

Antibiotics can accumulate in the body via ingestion, presenting serious health and safety risks to humans, and have garnered extensive international attention in recent years. Meanwhile, aptamers have been applied in the detection of antibiotics, mainly because of their good stability, high specificity, easy synthesis, and low cost. Among various kinds of aptasensors, fluorescent dye-based or nanomaterial-based fluorescent aptasensors serve as highly efficient tools for the rapid quantification of antibiotics owing to their remarkable sensitivity, specificity, and selectivity. In addition, some novel techniques such as aptamer tailoring, signal amplification, and artificial intelligence for aptasensors are also presented. This paper provides a detailed and comprehensive review of fluorescent aptasensors for antibiotic detection. Moreover, it pinpoints the challenges encountered during the development of the aforesaid fluorescent aptasensors and puts forward future research directions.

Structure switching aptamer enhance sensitivity and specificity of photonic crystal-based sensors for RSV-G protein detection

Photonic crystal-based aptasensors for viral proteins detection offer the advantage of producing visible readouts. However, they usually suffer from limited sensitivity and high non-specific background noise. A significant contributing factor to these issues is the use of fixed-conformation aptamers in these sensors. To address this challenge, we have developed an approach to transforming aptamers into molecular switches that undergo conformational changes upon target binding. This strategy enhances the performance of colorimetric aptasensors by improving sensitivity and reducing background noise without the need for post-SELEX modifications. In this study, we present an efficient aptamer screening method designed to facilitate the development of target-responsive aptamer structure switches from pre-existing aptamers with stable conformations. A novel algorithm was developed that integrates binding motif information with secondary structure data to generate three ssDNA libraries. Through virtual screening, we identified an aptamer with structure-switching properties (MSA-Apt-16) (Kd = 7.6 nM), and its structure-switching property was further validated using molecular simulations and circular dichroism spectroscopy. Further, the binding kinetics and selectivity of both aptamers were evaluated using SPR. MSA-Apt-16 displayed a kon of 1.39 × 105 Ms-1 and a koff of 1.76 × 10-4 s- 1, signifying a high binding affinity and selectivity. In contrast, Apt-H8 showed a kon of 1.22 × 10-4 Ms-1 and a koff of 1.89 × 10-3s-1, showing a low binding affinity with RSV-G. Moreover, we demonstrated the enhanced sensitivity of the newly designed molecular switching aptamer (MSA-Apt-16) compared to the parent aptamer (Apt-H8) by incorporating them into the photonic crystal-based colorimetric sensing platform for the detection of RSV-G protein. The molecular switching aptasensor successfully detected RSV-G protein, exhibiting efficient color changes, significantly reduced background noise, and a limit of detection (LOD) of 1 pg/mL with a linear range of 1-500 pg/mL (signal-to-noise ratio = 3, R2 = 0.9489), and an analytical recovery of 94.0 ± 1.5 % to 102.0 ± 1.5 % in artificial serum, saliva, and nasal swab samples. In contrast, the parent aptamer demonstrated a LOD of 1 ng/mL with a linear range of 1-500 ng/mL (R2 = 0.9129). Our pipeline offers a robust and broadly applicable technique for developing aptamer switches personalized to specific targets, significantly reducing background noise and enhancing aptasensor efficiency, thus expanding the potential applications of aptasensors in various diagnostic fields.

Development of a dual-mode lateral flow assay based on structure-guided aptamers for the detection of capsaicin in gutter oils

The construction of structure-guided aptamers and the ultra-sensitive aptamer-based lateral flow assays (Apt-LFA) integrated detection method hold significant potential for food analysis. Using an engineered modified sequence strategy, we successfully developed the aptamer Cap-1-2M4, significantly enhancing its affinity for capsaicin (CAP) to 0.6197 ± 0.0689 nM. We developed a highly sensitive method for CAP detection based on Vap@AuNFs, leveraging their superior colorimetric and photothermal signals and high aptamer coupling performance. The Vap@AuNFs-based Apt-LFA (Vap@AuNFs-Apt-LFA) achieve signal amplification through catalytic hairpin assembly (CHA) and exonuclease III (Exo III). Additionally, dual-mode (colorimetric and photothermal) quantitative detection via lateral flow test strips was achieved by capturing the nucleic acid effect of Vap@AuNFs. The limit of detection (LOD) of Vap@AuNFs-Apt-LFA by colorimetric/photothermal method was 0.043 ng mL-1 and 0.011 ng mL-1, with linear ranges of 0.1-500 ng mL-1 and 0.05-500 ng mL-1, respectively. This aptamer engineering strategy and the developed Vap@AuNFs-Apt-LFA offer new directions for food safety and provide a reference for feasible portable detection methods.

Enhancing Target Detection: A Fluorescence-Based Streptavidin-Bead Displacement Assay

Fluorescence-based aptasensors have been regarded as innovative analytical tools for the detection and quantification of analytes in many fields, including medicine and therapeutics. Using DNA aptamers as the biosensor recognition component, conventional molecular beacon aptasensor designs utilise target-induced structural switches of the DNA aptamers to generate a measurable fluorescent signal. However, not all DNA aptamers undergo sufficient target-specific conformational changes for significant fluorescence measurements. Here, the use of complementary 'antisense' strands is proposed to enable fluorescence measurement through strand displacement upon target binding. Using a published target-specific DNA aptamer against the receptor binding domain of SARS-CoV-2, we designed a streptavidin-aptamer bead complex as a fluorescence displacement assay for target detection. The developed assay demonstrates a linear range from 50 to 800 nanomolar (nM) with a limit of detection calculated at 67.5 nM and a limit of quantification calculated at 204.5 nM. This provides a 'fit-for-purpose' model assay for the detection and quantification of any target of interest by adapting and functionalising a suitable target-specific DNA aptamer and its complementary antisense strand.

A universal optical aptasensor for antibiotics determination based on a new high-efficiency Förster resonance energy transfer pair

A novel "turn-on" aptasensor for kanamycin (Kana) detection based on a new Förster resonance energy transfer (FRET) pair is reported. A new organic small molecule was employed as a high-efficiency quencher for fluorophore. Based on specific interactions between ssDNA and the quencher, an ingenious and amplified strategy was designed. In the absence of the target, the fluorescence of the fluorophore labeled at the end of the aptamer was quenched. After the binding of the aptamer to the target, the fluorescence was recovered and amplified. The proposed aptasensor showed high specificity, selectivity, and stability in complicated systems. With the P3-based strategy, the limit of detection for Kana is estimated to be 10 nM, which is much lower than the maximum allowable concentration in milk. The recoveries of spiked Kana in milk were in the range 99.8 ~ 105.3% (n = 3). Fortunately, this novel method can be easily extended to other antibiotics such as tobramycin by simply replacing the aptamer, showing great potential as a universal platform for selective, sensitive, and rapid detection of hazardous analytes in food samples.

Development of Better Aptamers: Structured Library Approaches, Selection Methods, and Chemical Modifications

Systematic evolution of ligands by exponential enrichment (SELEX) has been used to discover thousands of aptamers since its development in 1990. Aptamers are short single-stranded oligonucleotides capable of binding to targets with high specificity and selectivity through structural recognition. While aptamers offer advantages over other molecular recognition elements such as their ease of production, smaller size, extended shelf-life, and lower immunogenicity, they have yet to show significant success in real-world applications. By analyzing the importance of structured library designs, reviewing different SELEX methodologies, and the effects of chemical modifications, we provide a comprehensive overview on the production of aptamers for applications in drug delivery systems, therapeutics, diagnostics, and molecular imaging.

Rational Approach to Optimizing Conformation-Switching Aptamers for Biosensing Applications

The utilization of structure-switching aptamers (SSAs) has enabled the development of novel sensing platforms for the sensitive and continuous detection of molecules. De novo development of SSAs, however, is complex and laborious. Here we describe a rational approach to SSA optimization that simultaneously improves aptamer binding affinity and introduces target-dependent conformation-switching for compatibility with real-world biosensor applications. Key structural features identified from NMR and computational modeling were used to optimize conformational switching in the presence of target, while large-scale, microarray-based mutation analysis was used to map regions of the aptamer permissive to mutation and identify combinations of mutations with stronger binding affinity. Optimizations were carried out in a relevant biofluid to ensure a seamless transition of the aptamer to a biosensing platform. Initial proof-of-concept for this approach is demonstrated with a cortisol binding aptamer but can easily be translated to other relevant aptamers. Cortisol is a hormone correlated with the stress response that has been associated with various medical conditions and is present at quantifiable levels in accessible biofluids. The ability to continuously track levels of stress in real-time via cortisol monitoring, which can be enabled by the aptamers reported here, is crucial for assessing human health and performance.

A simple tag-free fluorometric aptasensing assay for sensitive detection of kanamycin

A novel label-free and enzyme-free fluorescence aptasensing assay that uses Sybr Green I (SGI) as the signal indicator for the kanamycin determination was designed. An aptamer-complementary strand (Apt/CP) conjugate was formed, which provided the intercalation sites for SGI and, therefore, a considerable fluorescent signal. The introduction of the target led to the separation of Apt from CP due to the high affinity of Apt toward kanamycin. Hence, the suitable intercalation gaps reduced, which resulted in a decrease in the generated fluorescent signal. Under optimized conditions, a broad linear concentration range from 0.05 μM to 20 μM and a limit of detection of 11.76 nM were obtained, confirming the ability of the fabricated aptasensor for sensitive and specific kanamycin detection in real samples such as milk and human serum. The aptasensing method has the potential to be extensively employed in the food industry and veterinary science due to its simplicity, sensitivity, user-friendly, and capability of on-site detection of kanamycin.

A massively parallel screening platform for converting aptamers into molecular switches

Aptamer-based molecular switches that undergo a binding-induced conformational change have proven valuable for a wide range of applications, such as imaging metabolites in cells, targeted drug delivery, and real-time detection of biomolecules. Since conventional aptamer selection methods do not typically produce aptamers with inherent structure-switching functionality, the aptamers must be converted to molecular switches in a post-selection process. Efforts to engineer such aptamer switches often use rational design approaches based on in silico secondary structure predictions. Unfortunately, existing software cannot accurately model three-dimensional oligonucleotide structures or non-canonical base-pairing, limiting the ability to identify appropriate sequence elements for targeted modification. Here, we describe a massively parallel screening-based strategy that enables the conversion of virtually any aptamer into a molecular switch without requiring any prior knowledge of aptamer structure. Using this approach, we generate multiple switches from a previously published ATP aptamer as well as a newly-selected boronic acid base-modified aptamer for glucose, which respectively undergo signal-on and signal-off switching upon binding their molecular targets with second-scale kinetics. Notably, our glucose-responsive switch achieves ~30-fold greater sensitivity than a previously-reported natural DNA-based switch. We believe our approach could offer a generalizable strategy for producing target-specific switches from a wide range of aptamers.

Biomedical applications of aptamer-modified chitosan nanomaterials: An updated review

Among polysaccharides of environmental and economic interest, chitosan (CS) is receiving much attention, particularly in the food and biotechnology industries to encapsulate active food ingredients and immobilize enzymes. CS nanoparticles (CS NPs) combine the intrinsic beneficial properties of both natural polymers and nanoscale particles such as quantum size effect, biocompatibility, biodegradability, and ease of modification, and have great potential for bioimaging, drug delivery, and biosensing applications. Aptamers are single-stranded oligonucleotides that can fold into predetermined structures and bind to the corresponding biomolecules. They are mainly used as targeting ligands in biosensors, disease diagnostic kits and treatment strategies. They can deliver contrast agents and drugs into cancer cells and tissues, control microorganism growth and precisely target pathogens. Aptamer-conjugated CS NPs can significantly improve the efficacy of conventional therapies, minimize their side effects on normal tissues, and overcome the enhanced permeability retention (EPR) effect. Further, aptamer-conjugated carbohydrate-based nanobiopolymers have shown excellent antibacterial and antiviral properties and can be used to develop novel biosensors for the efficient detection of antibiotics, toxins, and other biomolecules. This updated review aims to provide a comprehensive overview of the bioapplications of aptamer-conjugated CS NPs used as innovative diagnostic and therapeutic platforms, their limitations, and potential future directions.

Fluorescence-based aptasensors for small molecular food contaminants: From energy transfer to optical polarization

Small molecular food contaminants, such as mycotoxins, pesticide residues and antibiotics, are highly probable to be passively introduced in food at all stages of its processing, including planting, harvest, production, transportation and storage. Owing to the high risks caused by the unknowing intake and accumulation in human, there is an urgent need to develop rapid, sensitive and efficient methods to monitor them. Fluorescence-based aptasensors provide a promising platform for this area owing to its simple operation, high sensitivity, wide application range and economical practicability. In this paper, the common sorts of small molecular contaminants in foods, namely mycotoxins, pesticides, antibiotics, etc, are briefly introduced. Then, we make a comprehensive review, from fluorescence resonance energy transfer (in turn-on, turn-off, and ratiometric mode, as well as energy upconversion) to fluorescence polarization, of the fluorescence-based aptasensors for the determination of these food contaminants reported in the last five years. The principle of signal generation, the advances of each sort of fluorescent aptasensors, as well as their applications are introduced in detail. Additionally, we also discussed the challenges and perspectives of the fluorescent aptasensors for small molecular food contaminants. This work will offer systematic overview and inspiration for amateurs, researchers and developers of fluorescence-based aptasensors for the detection of small molecules.

Structure-switching aptamer triggering signal amplification strategy for tobramycin detection based on hybridization chain reaction and fluorescence synergism

Based on hybridization chain reaction (HCR) and fluorescence synergism, a novel aptasensor for tobramycin was successfully constructed. Tobramycin competed with cDNA-FAM to bind aptamers immobilized on magnetic beads. After magnetic separation, the released cDNA-FAM acted as initiator to trigger HCR amplification, thus the fluorescence was significantly enhanced due to binding of SYBR Green Ⅰ (SGI) to the formed long double-stranded DNA and the synergistic fluorescence of FAM. In the absence of tobramycin, the initiator was magnetically separated and no HCR occurred, more importantly, graphene oxide can quench the fluorescence of excessive hairpins/SGI and cDNA-FAM, so almost no background signal was detected. This aptasensor can monitor tobramycin in the range of 0.3-50 μM with low detection limit of 17.37 nM. Due to the potential generality of structure-switching aptamers and effectiveness of fluorescence synergism, this enzyme-free amplification strategy can be extended to other applications by rational design of nucleic acid sequences.

Regulating Valence States of Gold Nanocluster as a New Strategy for the Ultrasensitive Electrochemiluminescence Detection of Kanamycin

Monitoring of kanamycin residue has attracted considerable attention owing to the potential harm caused by the abuse of kanamycin. However, the detection of kanamycin has been limited owing to its electrochemical and optical inertness. Herein, we report a facile and highly efficient electrochemiluminescence (ECL) strategy for the detection of kanamycin based on the valence state effect of gold nanocluster (AuNC) probes. It is proven that Au⁰ in chemically reduced AuNCs (CR-AuNCs) could be oxidized to Au^I via the redox reaction between kanamycin and CR-AuNCs in the presence of H₂O₂, resulting in ECL quenching due to the valence state change of CR-AuNCs. Because the ECL of the AuNC probes is sensitively affected by the valence state, excellent sensitivity for kanamycin was achieved without any signal amplification operation and aptamers. A preferable linear-dependent curve was acquired in the detection range from 1.0 × 10^-11 to 3.3 × 10^-5 M with an extremely low detection limit of 1.5 × 10^-12 M. The proposed kanamycin sensing platform is very simple and shows high selectivity and an extremely broad linear range detection of kanamycin. Furthermore, the proposed sensing platform can detect kanamycin in milk samples with excellent recoveries. Therefore, this sensing strategy provides an effective and facile way to detect kanamycin and can help promote the understanding of the constructed mechanism of the AuNC-based ECL system, thus greatly broadening its potential application in ECL fields.

Target-initiated autonomous synthesis of metal-ion dependent DNAzymes for label-free and amplified fluorescence detection of kanamycin in milk samples

Accurate and sensitive monitoring of the abused antibiotics is vital because excessive antibiotics in human body can cause toxicity to kidney or lead to potential loss of hearing. In this work, we described a label-free and highly sensitive fluorescent aptasensing platform for detecting kanamycin in milk samples based on the synchronization signal amplification of primer exchange reaction (PER) and metal-ion dependent DNAzyme. The target kanamycin binds the aptamer sequence hybridized on a hairpin template and initiates PER for autonomous synthesis of Mg²⁺-dependent DNAzyme sequences with aid of Bst-DNA polymerase at isothermal conditions. Such a synthesis process can be repeated many times to produce lots of DNAzymes to cyclically cleave the rA site in the signal hairpin substrates under the assistance of Mg²⁺ cofactor to liberate numerous free G-quadruplex fragments. The organic dye thioflavin T (ThT) further associates with these G-quadruplex fragments to yield substantially intensified fluorescence for sensitive detection of kanamycin with a low detection limit of 0.36 nM. In addition, the developed aptamer sensing method also shows a good selectivity for kanamycin against other interfering antibiotics, and can realize the monitoring of kanamycin added in milk samples, highlighting its potential for sensitive monitoring of trace amount of kanamycin for food safety applications.

Recent Advances in Optical Detection of Aminoglycosides

Aminoglycosides (AGs) are broad-spectrum antibiotics used in both human infection and animal medicine. The overuse of AGs causes undesirable residues in food, leading to serious health problems due to food chain accumulation. In recent years, various methods have been developed to determine AGs in food. Among these methods, fluorescent (FL), colorimetric and chemiluminescent (CL) optical methods possess advantages such as their simple instrumentation, low cost, simple operation, feasibility of realizing visualization, and smartphone imaging. This mini-review summarizes optical assays for the detection of AGs in food developed in recent years. The detection principles for different categories are discussed. Then, the amplification techniques for the ultrasensitive detection of AGs are introduced. We also discuss multiplex methods for the simultaneous detection of AGs. Finally, the challenges and future prospects are discussed in the Conclusions and Perspectives section.

Chlortetracycline-Functionalized Silver Nanoparticles as a Colorimetric Probe for Aminoglycosides: Ultrasensitive Determination of Kanamycin and Streptomycin

Aminoglycosides (AMGs) have been extensively used to treat infectious diseases caused by Gram-negative bacteria in livestock and humans. A selective and sensitive colorimetric probe for the determination of streptomycin and kanamycin was proposed based on chlortetracycline-coated silver nanoparticles (AgNPs-CTC) as the sensing element. Almost all of the tested aminoglycoside antibiotics can rapidly induce the aggregation of AgNPs, along with a color change from yellow to orange/red. The selective detection of aminoglycoside antibiotics, including tobramycin, streptomycin, amikacin, gentamicin, neomycin, and kanamycin, with other types of antibiotics, can be achieved by ultraviolet (UV) spectroscopy. This developed colorimetric assay has ability to detect various AMGs using in-depth surface plasmon resonance (SPR) studies. With this determination of streptomycin and kanamycin was achieved at the picomolar level (pM) by using a UV-visible spectrophotometer. Under aqueous conditions, the linear range of the colorimetric sensor for streptomycin and kanamycin was 1000-1,1000 and 120-480 pM, respectively. The corresponding limit of detection was 2000 pM and 120 pM, respectively. Thus, the validated dual colorimetric and ratiometric method can find various analytical applications for the ultrasensitive and rapid detection of AMG antibiotics in water samples.

Visual detection of kanamycin with DNA-functionalized gold nanoparticles probe in aptamer-based strip biosensor

Kanamycin has been widely used to treat human and animal diseases. The excessive use of kanamycin causes its accumulation in animal-derived foods, and eventually threats human health. In the present study, we develop a lateral flow strip biosensor for fast and sensitive detection of kanamycin. The strip biosensor combines the easy separation of magnetic microspheres (MMS) with target-mediated chain displacement of single-stranded DNA and the capture of the visible DNA-functionalized gold nanoparticles (AuNPs) probe. The presence of kanamycin can competitively bind to the aptamer and release cDNA to the supernatant. The concentration of free cDNA, which is the direct target of the strip, is proportional to the concentration of kanamycin. The capture of DNA-functionalized AuNPs on the test zone of the strip through cDNA-induced hybridization provides a visual detection signal. The assay can be completed within 20 min. The visual detection limit by naked eyes of the strip is 50 nM. A linear detection range of 5-500 nM is derived for quantitative determination, with the detection limit of 4.96 nM (S/N = 3). This lateral flow strip biosensor can quickly and sensitively detect kanamycin in different food samples, which holds great application potential in medicine and daily life.