Ion Liquid Modified GO Filler to Improve the Performance of Polymer Electrolytes for Li Metal Batteries

Metal-Organic Framework Glass as a Functional Filler Enables Enhanced Performance of Solid-State Polymer Electrolytes for Lithium Metal Batteries

Polymers are promising candidates as solid-state electrolytes due to their performance and processability, but fillers play a critical role in adjusting the polymer network structure and electrochemical, thermal, and mechanical properties. Most fillers studied so far are anisotropic, limiting the possibility of homogeneous ion transport. Here, applying metal-organic framework (MOF) glass as an isotropic functional filler, solid-state polyethylene oxide (PEO) electrolytes are prepared. Calorimetric and diffusion kinetics tests show that the MOF glass addition reduces the glass transition temperature of the polymer phase, improving the mobility of the polymer chains, and thereby facilitating lithium (Li) ion transport. By also incorporating the lithium salt and ionic liquid (IL), Li-Li symmetric cell tests of the PEO-lithium salt-MOF glass-IL electrolyte reveal low overpotential, indicating low interfacial impedance. Simulations show that the isotropic structure of the MOF glass facilitates the wettability of the IL by enhancing interfacial interactions, leading to a less confined IL structure that promotes Li-ion mobility. Finally, the obtained electrolyte is used to construct Li-lithium iron phosphate full batteries that feature high cycle stability and rate capability. This work therefore demonstrates how an isotropic functional filler can be used to enhance the electrochemical performance of solid-state polymer electrolytes.

Polymerizable Deep Eutectic Solvent-Based Polymer Electrolyte for Advanced Dendrite-Free, High-Rate, and Long-Life Li Metal Batteries

The recently developed advanced electrolytes possess many crucial qualities, including robust stability, Li dendrite-free, and comparable interface compatibility, for the manufacturing of Li metal batteries with a high energy density. In this study, lithium bis(trifluoromethane)sulfonimide, acrylamide, and succinonitrile were first used to design a polymerizable monomer. Then, it went through in situ thermal polymerization to attain a new solid polymer electrolyte [named poly(PDES)]. The synthesized poly(PDES) electrolyte achieved higher ionic conductivity (∼1.89 × 10-3 S cm-1), oxidation potential (∼5.10 V versus Li+/Li), and a larger lithium-ion transfer number (∼0.63). Moreover, poly(PDES) was nonflammable and could effectively inhibit the formation of Li dendrites. As a result, the assembled batteries using the poly(PDES) electrolyte for both Li||LiFePO4 and Li||LiNi0.8Co0.1Mn0.1O2 exhibited excellent interface compatibility and electrochemical performances. This poly(PDES) electrolyte has promising potential for broad application in lithium-metal batteries with elevated energy density and safety performance in the near future.

Using Pegylated Graphene Oxide to Achieve High Performance Solid Polymer Electrolyte Based on Poly(ethylene oxide)/Polyvinyl Alcohol Blend (PEO/PVA)

Solid polymer electrolytes (SPEs) have emerged as a promising avenue for developing flexible lithium-ion batteries. However, the low ionic conductivity of polymers remains a primary challenge that has been the subject of intensive research efforts in recent years. In this work, polyethylene oxide (PEO), polyvinyl alcohol, lithium perchlorate (LiClO₄), and graphene functionalized with polyethylene glycol (FGO) have been used to prepare SPE/FGO electrolytes by casting solution technique. X-ray diffraction (XRD) and differential scanning calorimetry (DSC) confirmed the reduction of SPE crystals and the increase of amorphous phases. The results demonstrated that the presence of functionalized graphene had an effective role in reducing crystallinity. Furthermore, the thermal and mechanical stability of the samples were corroborated through thermogravimetric analysis (TGA) and tensile tests, respectively. Notably, the samples exhibited adequate ionic conductivity at room temperature, with the highest ionic conductivity of 5.2 × 10^-5 S·cm^-1 observed for 2%wt of FGO in SPE (SPE/FGO(2)).

Graphene in Solid-State Batteries: An Overview

Solid-state batteries (SSBs) have emerged as a potential alternative to conventional Li-ion batteries (LIBs) since they are safer and offer higher energy density. Despite the hype, SSBs are yet to surpass their liquid counterparts in terms of electrochemical performance. This is mainly due to challenges at both the materials and cell integration levels. Various strategies have been devised to address the issue of SSBs. In this review, we have explored the role of graphene-based materials (GBM) in enhancing the electrochemical performance of SSBs. We have covered each individual component of an SSB (electrolyte, cathode, anode, and interface) and highlighted the approaches using GBMs to achieve stable and better performance. The recent literature shows that GBMs impart stability to SSBs by improving Li+ ion kinetics in the electrodes, electrolyte and at the interfaces. Furthermore, they improve the mechanical and thermal properties of the polymer and ceramic solid-state electrolytes (SSEs). Overall, the enhancements endowed by GBMs will address the challenges that are stunting the proliferation of SSBs.