Catalytic Production of Oxygenated and Hydrocarbon Chemicals From Cellulose Hydrogenolysis in Aqueous Phase

Recent advances in the chemical-catalytic approaches for the production of 5-(halomethyl)furfurals from cellulose and its derivatives: A review

5-Hydroxymethylfurfural (HMF) is recognized by the U.S. Department of Energy as a key platform chemical derived from renewable C6 sugars obtained from lignocellulosic biomass. Despite its importance, the economic utilization of HMF is limited by its hydrophilic properties and insufficient stability. In contrast, 5-(halomethyl)furfurals, which are hydrophobic analogs of HMF, demonstrate improved stability, making their extraction and purification easier while extending their shelf life. These compounds present an alternative opportunity for HMF in derivative chemistry. However, the literature on halogenated HMF derivatives is scattered and lacks a comprehensive review. This review aims to fill this gap by synthesizing current research, evaluating achievements and challenges, discussing pathways for the production of 5-(halomethyl)furfurals (XMF, where X = Cl, Br) from cellulose and its derivatives, detailing reaction mechanisms, and proposing improvements in catalytic systems. Future research may focus on the innovative and economically viable direct synthesis of these derivatives from biomass-derived sources for scale-up and commercialization.

Green and efficient synthesis of cellulose nanocrystals from Hamelia patens leftover via hydrolysis of microwave assisted-ionic liquid (MWAIL) pretreated microcrystalline cellulose

The efficient bioconversion of the lignocellulosic agro-waste has immense importance in biorefinery processing in extracting the cellulose and saccharide fractions. To achieve this, a series of chemical pretreatments is employed, thus concerning environmental threats limit its use. Therefore, an ionic liquid is employed for pretreatment before sustainable extractions owing to its safe manipulation, recycling, and reusability. Specifically, microwave-assisted ionic liquid (MWAIL) pretreatment has significant importance in extracting high cellulose yield at less thermal power consumption. In this study, the leftover stalks of Hamelia patens were subjected to MWAIL pretreatment at 60, 70, 80, and 90 °C to extract microcrystalline cellulose (MCC). Subsequently, the MCC was fabricated into cellulose nanocrystals (CNC) through hydrolytic treatment using acidic and ionic liquids and denoted as CNC-AH and CNC-ILH. Thus obtained CNC was characterized by FTIR, FESEM, XRD, and TGA to investigate the influence of solvent on its morphology, crystallinity, and thermal stability of CNC. The results support that the CNC-ILH has comparatively more thermal and dispersal stability with a reduced crystallinity index than CNC-AH. The surprising results of CNC-ILH signify its utilization in diverse applications in the food and industrial sectors.

Solvothermal liquefaction of orange peels into biocrude: An experimental investigation of biocrude yield and energy compositional dependency on process variables

The efficient valorization of biomass for energy-derived biocrudes is essential for effective waste management. However, the production of biocrudes with high energy and reduced oxygen contents during the liquefaction process requires further insight. Therefore, the impact of reaction temperature, residence time, and ethanol: acetone on the energy compositions and bioproduct's yield enhancement were investigated. The biocrudes obtained were characterized using elemental analysis, GC-MS, FTIR, GPC and TGA to understand the effects of process parameters on the biocrudes' compositions. An improved HHV (38.18 MJ/kg) and lower O/C ratio (0.11) were obtained at 430 °C, 35 min and 50% ethanol with a significant improvement in the enhancement factor, deoxygenation, and percentage hydrogenation of 2.63, 36.88%, and 77.87%, respectively. The presence of ketones, hydrocarbons, phenolics and aromatics of 23.74, 4.28, 37.20 and 17.81% respectively indicate the potential of the obtained biocrude as renewable energy sources upon further upgrading.

Recent Advances in C5 and C6 Sugar Alcohol Synthesis by Hydrogenation of Monosaccharides and Cellulose Hydrolytic Hydrogenation over Non-Noble Metal Catalysts

A new reality of the 21st century is the transition to a new type of economy and energy concepts characterized by the replacement of existing petrochemical routes to a bio-based circular economy. The needs for new strategies in obtaining basic products from bio-based resources with minimum CO₂ traces has become mandatory. In this review, recent trends in the conversion of biomass-derived molecules, such as simple monomeric sugars and cellulose, to industrially important C₅ and C₆ sugar alcohols on heterogeneous catalysts based on non-noble metals are discussed focusing on the influence of catalyst structures and reaction conditions used on the substrate conversion and product selectivity. The challenges and prominent ideas are suggested for the further development of catalytic hydrogenation of naturally abundant carbohydrates to value-added chemicals on non-noble metal catalysts.

Cellulose hydrogenolysis to alcohol and ketone products using Co@C catalysts in the phosphoric acid aqueous solution

Combining encapsulated Co@C catalyst and H3PO4 aqueous solution, high value-added chemicals that are widely used in various fields can be obtained from renewable biomass materials.

Kinetic Modeling for the “One-Pot” Hydrogenolysis of Cellulose to Glycols over Ru@Fe3O4/Polymer Catalyst

Despite numerous works devoted to the cellulose hydrogenolysis process, only some of them describe reaction kinetics. This is explained by the complexity of the process and the simultaneous behavior of different reactions. In this work, we present the results of the kinetic study of glucose hydrogenolysis into ethylene- and propylene glycols in the presence of Ru@Fe3O4/HPS catalyst as a part of the process of catalytic conversion of cellulose into glycols. The structure of the Ru-containing magnetically separable Ru@Fe3O4/HPS catalysts supported on the polymeric matrix of hypercrosslinked polystyrene was studied to propose the reaction scheme. As a result of this study, a formal description of the glucose hydrogenolysis process into glycols was performed. Based on the data obtained, the mathematical model of the glucose hydrogenolysis kinetics in the presence of Ru@Fe3O4/HPS was developed and the parameter estimation was carried out. The synthesized catalyst was found to be characterized by the enhanced magnetic properties and higher catalytic activity in comparison with previously developed catalytic systems (i.e., on the base of SiO2). The summarized selectivity towards the glycols formation was found to be ca. 42% at 100% of the cellulose conversion in the presence of Ru@Fe3O4/HPS.

Recent advances in the valorization of plant biomass

Plant biomass is a highly abundant renewable resource that can be converted into several types of high-value-added products, including chemicals, biofuels and advanced materials. In the last few decades, an increasing number of biomass species and processing techniques have been developed to enhance the application of plant biomass followed by the industrial application of some of the products, during which varied technologies have been successfully developed. In this review, we summarize the different sources of plant biomass, the evolving technologies for treating it, and the various products derived from plant biomass. Moreover, the challenges inherent in the valorization of plant biomass used in high-value-added products are also discussed. Overall, with the increased use of plant biomass, the development of treatment technologies, and the solution of the challenges raised during plant biomass valorization, the value-added products derived from plant biomass will become greater in number and more valuable.

Valorisation of plastic waste via metal-catalysed depolymerisation

Metal-catalysed depolymerisation of plastics to reusable building blocks, including monomers, oligomers or added-value chemicals, is an attractive tool for the recycling and valorisation of these materials. The present manuscript shortly reviews the most significant contributions that appeared in the field within the period January 2010–January 2020 describing selective depolymerisation methods of plastics. Achievements are broken down according to the plastic material, namely polyolefins, polyesters, polycarbonates and polyamides. The focus is on recent advancements targeting sustainable and environmentally friendly processes. Biocatalytic or unselective processes, acid–base treatments as well as the production of fuels are not discussed, nor are the methods for the further upgrade of the depolymerisation products.