The "Oil-Spill Snorkel": an innovative bioelectrochemical approach to accelerate hydrocarbons biodegradation in marine sediments

Electroactive bacteria-established long-distance electron transfer to oxygen facilitates bio-transformation of dissolved organic matter for sediment remediation

Electroactive bacteria (EAB) in sediment commonly establish long-distance electron transfer (LDET) to access O2, facilitating the degradation of organic contaminants, which we hypothesize is mediated by the bio-transformation of dissolved organic matter (DOM). This study confirmed that EAB-established LDET to O2 via a microbial electrochemical snorkel raised the electric potential of sediment by increasing HCl-extracted Fe(III) and NO3- concentrations while reducing DOM concentrations, which further modified microbial diversity and composition, notably reduced the relative abundance of fermentative bacteria. As a result, DOM showed the highest SUVA254 value (3.88) and SUVA280 value (1.61), preliminarily suggesting their enhanced aromaticity, humification and average molecular weight. Additionally, these DOM exhibited the highest electron transfer capacity (174.14±3.62 μmol e- /g C) and redox current. Based on these findings, we propose four possible avenues through which EAB-established LDET to O2 facilitates sediment remediation, mainly including DOM involved affinity, direct and indirect electron transfer, and induced photochemical reaction in degradation or humification process of organic contaminants. Although these proposed avenues require further verification, this work sheds light on deciphering the mechanisms underlying the augmented degradation of organic contaminants facilitated by EAB-established LDET to O2, offering fresh insights into sediment remediation.

An overview of bioelectrokinetic and bioelectrochemical remediation of petroleum-contaminated soils

The global problem of petroleum contamination in soils seriously threatens environmental safety and human health. Current studies have successfully demonstrated the feasibility of bioelectrokinetic and bioelectrochemical remediation of petroleum-contaminated soils due to their easy implementation, environmental benignity, and enhanced removal efficiency compared to bioremediation. This paper reviewed recent progress and development associated with bioelectrokinetic and bioelectrochemical remediation of petroleum-contaminated soils. The working principles, removal efficiencies, affecting factors, and constraints of the two technologies were thoroughly summarized and discussed. The potentials, challenges, and future perspectives were also deliberated to shed light on how to overcome the barriers and realize widespread implementation on large scales of these two technologies.

A. Jorand F, Barrière F, Etienne M. Challenges and Applications of Nitrate-Reducing Microbial Biocathodes

Bioelectrochemical systems which employ microbes as electrode catalysts to convert chemical energy into electrical energy (or conversely), have emerged in recent years for water sanitation and energy recovery. Microbial biocathodes, and especially those reducing nitrate are gaining more and more attention. The nitrate-reducing biocathodes can efficiently treat nitrate-polluted wastewater. However, they require specific conditions and they have not yet been applied on a large scale. In this review, the current knowledge on nitrate-reducing biocathodes will be summarized. The fundamentals of microbial biocathodes will be discussed, as well as the progress towards applications for nitrate reduction in the context of water treatment. Nitrate-reducing biocathodes will be compared with other nitrate-removal techniques and the challenges and opportunities of this approach will be identified.

A Review on Biotechnological Approaches Applied for Marine Hydrocarbon Spills Remediation

The increasing demand for petroleum products generates needs for innovative and reliable methods for cleaning up crude oil spills. Annually, several oil spills occur around the world, which brings numerous ecological and environmental disasters on the surface of deep seawaters like oceans. Biological and physico-chemical remediation technologies can be efficient in terms of spill cleanup and microorganisms—mainly bacteria—are the main ones responsible for petroleum hydrocarbons (PHCs) degradation such as crude oil. Currently, biodegradation is considered as one of the most sustainable and efficient techniques for the removal of PHCs. However, environmental factors associated with the functioning and performance of microorganisms involved in hydrocarbon-degradation have remained relatively unclear. This has limited our understanding on how to select and inoculate microorganisms within technologies of cleaning and to optimize physico-chemical remediation and degradation methods. This review article presents the latest discoveries in bioremediation techniques such as biostimulation, bioaugmentation, and biosurfactants as well as immobilization strategies for increasing the efficiency. Besides, environmental affecting factors and microbial strains engaged in bioremediation and biodegradation of PHCs in marines are discussed.

Microbial Electrochemical Technologies for Sustainable Nitrogen Removal in Marine and Coastal Environments

For many years, the world's coastal marine ecosystems have received industrial waste with high nitrogen concentrations, generating the eutrophication of these ecosystems. Different physicochemical-biological technologies have been developed to remove the nitrogen present in wastewater. However, conventional technologies have high operating costs and excessive production of brines or sludge which compromise the sustainability of the treatment. Microbial electrochemical technologies (METs) have begun to gain attention due to their cost-efficiency in removing nitrogen and organic matter using the metabolic capacity of microorganisms. This article combines a critical review of the environmental problems associated with the discharge of the excess nitrogen and the biological processes involved in its biogeochemical cycle; with a comparative analysis of conventional treatment technologies and METs especially designed for nitrogen removal. Finally, current METs limitations and perspectives as a sustainable nitrogen treatment alternative and efficient microbial enrichment techniques are included.

Electrochemical analysis of a microbial electrochemical snorkel in laboratory and constructed wetlands

Microbial electrochemical snorkel (MES) is a short-circuited microbial fuel cell applicable to water treatment that does not produce energy but requires lower cost for its implementation. Few reports have already described its water treatment capabilities but no deeper electrochemical analysis were yet performed. We tested various materials (iron, stainless steel and porous graphite) and configurations of snorkel in order to better understand the rules that will control in a wetland the mixed potential of this self-powered system. We designed a model snorkel that was studied in laboratory and on the field. We confirmed the development of MES by identifying anodic and cathodic parts, by measuring the current between them and by analyzing microbial ecology in laboratory and field experiments. An important application is denitrification of surface water. Here we discuss the influence of nitrate on its electrochemical response and denitrification performances. Introducing nitrate caused the increase of the mixed potential of MES and of current at a potential value relatively more positive than for nitrate-reducing biocathodes described in the literature. The major criteria for promoting application of MES in artificial wetland dedicated to mitigation of non-point source nitrate pollution from agricultural water are considered.

Electrifying biotrickling filters for the treatment of aquaponics wastewater

This work aimed to study the electrification of biotrickling filters by means of Microbial electrochemical technologies (MET) to develop an easy-to-assemble and easy-to-use MET for nitrogen removal without external aeration nor addition of chemicals. Four different designs were tested. The highest ammonium and nitrate removal rates (94 gN·m^-3·d^-1 and 43 gN·m^-3·d^-1, respectively) were reached by combining an aerobic zone with an electrified anoxic zone. The standards of effluent quality suitable for hydroponics were met at low energy cost (8.3 × 10^-2 kWh·gN^-1). Electrified biotrickling filters are a promising alternative for aquaponics and a potential treatment for organic carbon-deficient ammonium-contaminated waters.

Assessing the efficiency and eco-sustainability of bioremediation strategies for the reclamation of highly contaminated marine sediments

Coastal sediments subjected to high anthropogenic impacts can accumulate large amounts of polycyclic aromatic hydrocarbons (PAHs) and metals, demanding effective and eco-sustainable remediation solutions. In this study, we carried out bioremediation experiments on marine sediments highly contaminated with PAHs and metals. In particular, we investigated the effects of biostimulation (by the addition of inorganic nutrients), bioaugmentation (by the addition of fungi belonging to Aspergillus sp.) and microbial fuel cell-based strategies on PAH degradation and on changes in metal partitioning. Results reported here indicate that all biotreatments determined a significant decrease of PAH concentrations (at least 60%) in a relatively short time interval (few weeks) and that biostimulation was the most effective approach (>90%). Biostimulation determined a faster degradation rate of high than low molecular weight PAHs, indicating a preferential biodegradation of specific PAH congeners. At the same time, the biotreatments changed the partitioning of metals, including their solubilization, suggesting the need of parallel environmental risk assessment. Our findings also suggest that ex situ biotreatments can have a lower carbon footprint than current management options of contaminated sediments (i.e., landfill disposal and/or disposal in confined aquatic facilities), but integration with other strategies for metal removal (e.g. through bioleaching) from sediments is needed for their safe re-use. Overall, results presented here provide new insights into the development of effective and eco-sustainable bioremediation strategies for the reclamation of highly contaminated marine sediments.

Treatment of wastewater from petroleum industry: current practices and perspectives

Petroleum industry is one of the fastest growing industries, and it significantly contributes to economic growth in developing countries like India. The wastewater from a petroleum industry consist a wide variety of pollutants like petroleum hydrocarbons, mercaptans, oil and grease, phenol, ammonia, sulfide, and other organic compounds. All these compounds are present as very complex form in discharged water of petroleum industry, which are harmful for environment directly or indirectly. Some of the techniques used to treat oily waste/wastewater are membrane technology, photocatalytic degradation, advanced oxidation process, electrochemical catalysis, etc. In this review paper, we aim to discuss past and present scenario of using various treatment technologies for treatment of petroleum industry waste/wastewater. The treatment of petroleum industry wastewater involves physical, chemical, and biological processes. This review also provides scientific literature on knowledge gaps and future research directions to evaluate the effect(s) of various treatment technologies available.

Centimeter-Long Microbial Electron Transport for Bioremediation Applications

Microbial bioremediation based on nano- to micrometer-scale electron transport has been intensively studied during the past decade, but its application can be hindered by a deficiency of suitable electron acceptors or slow mass transportation at contaminated sites. Microbial long-distance electron transport (LDET), which can couple spatially separated redox reactions across distances in natural environments, has recently emerged at centimeter-length scales. LDET explains a range of globally important biogeochemical phenomena and overcomes the drawbacks of conventional bioremediation by directly linking distant electron donors and acceptors. Here, we highlight recent research outcomes in examining, characterizing, and engineering LDET, and describe how LDET can be exploited to develop advanced technologies for the bioremediation of soils and sediments.

Parallel artificial and biological electric circuits power petroleum decontamination: The case of snorkel and cable bacteria

Degradation of petroleum hydrocarbons (HC) in sediments is often limited by the availability of electron acceptors. By allowing long-distance electron transport (LDET) between anoxic sediments and oxic overlying water, bioelectrochemical snorkels may stimulate the regeneration of sulphate in the anoxic sediment thereby accelerating petroleum HC degradation. Cable bacteria can also mediate LDET between anoxic and oxic sediment layers and thus theoretically stimulate petroleum HC degradation. Here, we quantitatively assessed the impact of cable bacteria and snorkels on the degradation of alkanes in marine sediment from Aarhus Bay (Denmark). After seven weeks, cable bacteria and snorkels accelerated alkanes degradation by +24 and +25%, respectively, compared to control sediment with no cable bacteria nor snorkel. The combination of snorkels and cable bacteria further enhanced alkanes degradation (+46%). Higher degradation rates were sustained by LDET-induced sulphide removal rather than, as initially hypothesized, sulphate regeneration. Cable bacteria are thus overlooked players in the self-healing capacity of crude-oil contaminated sediments, and may inspire novel remediation treatments upon hydrocarbon spillage.

Effect of pore size on the current produced by 3-dimensional porous microbial anodes: A critical review

Microbial anodes are the cornerstone of most electro-microbial processes. Designing 3-dimensional porous electrodes to increase the surface area of the electroactive biofilm they support is a key challenge in order to boost their performance. In this context, the critical review presented here aims to assess whether an optimal range of pore size may exist for the design of microbial anodes. Pore sizes of a few micrometres can enable microbial cells to penetrate but in conditions that do not favour efficient development of electroactive biofilms. Pores of a few tens of micrometres are subject to clogging. Sizes of a few hundreds of micrometres allow penetration of the biofilm inside the structure, but its development is limited by internal acidification. Consequently, pore sizes of a millimetre or so appear to be the most suitable. In addition, a simple theoretical approach is described to establish basis for porous microbial anode design.

Removal of Hepatitis B virus surface HBsAg and core HBcAg antigens using microbial fuel cells producing electricity from human urine

Microbial electrochemical technology is emerging as an alternative way of treating waste and converting this directly to electricity. Intensive research on these systems is ongoing but it currently lacks the evaluation of possible environmental transmission of enteric viruses originating from the waste stream. In this study, for the first time we investigated this aspect by assessing the removal efficiency of hepatitis B core and surface antigens in cascades of continuous flow microbial fuel cells. The log-reduction (LR) of surface antigen (HBsAg) reached a maximum value of 1.86 ± 0.20 (98.6% reduction), which was similar to the open circuit control and degraded regardless of the recorded current. Core antigen (HBcAg) was much more resistant to treatment and the maximal LR was equal to 0.229 ± 0.028 (41.0% reduction). The highest LR rate observed for HBsAg was 4.66 ± 0.19 h⁻¹ and for HBcAg 0.10 ± 0.01 h⁻¹. Regression analysis revealed correlation between hydraulic retention time, power and redox potential on inactivation efficiency, also indicating electroactive behaviour of biofilm in open circuit control through the snorkel-effect. The results indicate that microbial electrochemical technologies may be successfully applied to reduce the risk of environmental transmission of hepatitis B virus but also open up the possibility of testing other viruses for wider implementation.

Combining electrokinetic transport and bioremediation for enhanced removal of crude oil from contaminated marine sediments: Results of a long-term, mesocosm-scale experiment

Marine sediments represent an important sink of harmful petroleum hydrocarbons after an accidental oil spill. Electrobioremediation techniques, which combine electrokinetic transport and biodegradation processes, represent an emerging technological platform for a sustainable remediation of contaminated sediments. Here, we describe the results of a long-term mesocosm-scale electrobioremediation experiment for the treatment of marine sediments contaminated by crude oil. A dimensionally stable anode and a stainless-steel mesh cathode were employed to drive seawater electrolysis at a fixed current density of 11 A/m². This approach allowed establishing conditions conducive to contaminants biodegradation, as confirmed by the enrichment of Alcanivorax borkumensis cells harboring the alkB-gene and other aerobic hydrocarbonoclastic bacteria. Oil chemistry analyses indicated that aromatic hydrocarbons were primarily removed from the sediment via electroosmosis and low molecular weight alkanes (nC₆ to nC₁₀) via biodegradation.

Anode potential selection for sulfide removal in contaminated marine sediments

Sulfate reducing microorganisms are typically involved in hydrocarbon biodegradation in the sea sediment, with their metabolism resulting in the by-production of toxic sulfide. In this context, it is of utmost importance identifying the optimal value for anodic potential which ensures efficient toxic sulfide removal. Along this line, in this study the (bio)electrochemical removal of sulfide was tested at anodic potentials of -205 mV, +195 mV and +300 mV (vs Ag/AgCl), also in the presence of a pure culture of the sulfur-oxidizing bacterium Desulfobulbus propionicus. Current production, sulfide concentration and sulfate concentration were monitored over time. At the end of the experiment sulfur deposition on the electrodes and the microbial communities were characterized by SEM-EDS and by next generation sequencing of the 16S rRNA gene respectively. Results confirmed that current production was linked to sulfide removal and D. propionicus promoted back oxidation of deposited sulfur to sulfate. The highest electron recovery was observed at +195 mV vs Ag/AgCl, and the lowest sulfur deposition was obtained at -205 mV vs Ag/AgCl anode polarization.

Microbial Electrochemical Technologies for Wastewater Treatment: Principles and Evolution from Microbial Fuel Cells to Bioelectrochemical-Based Constructed Wetlands

Microbial electrochemical technologies (MET) rely on the presence of the metabolic activity of electroactive bacteria for the use of solid-state electrodes for oxidizing different kinds of compound that can lead to the synthesis of chemicals, bioremediation of polluted matrices, the treatment of contaminants of interest, as well as the recovery of energy. Keeping these possibilities in mind, there has been growing interest in the use of electrochemical technologies for wastewater treatment, if possible with simultaneous power generation, since the beginning of the present century. In the last few years, there has been growing interest in exploring the possibility of merging MET with constructed wetlands offering a new option of an intensified wetland system that could maintain a high performance with a lower footprint. Based on that interest, this paper explains the general principles of MET, and the different known extracellular electron transfer mechanisms ruling the interaction between electroactive bacteria and potential solid-state electron acceptors. It also looks at the adoption of those principles for the development of MET set-ups for simultaneous wastewater treatment and power generation, and the challenges that the technology faces. Ultimately, the most recent developments in setups that merge MET with constructed wetlands are presented and discussed.

Survival and Energy Producing Strategies of Alkane Degraders Under Extreme Conditions and Their Biotechnological Potential

Many petroleum-polluted areas are considered as extreme environments because of co-occurrence of low and high temperatures, high salt, and acidic and anaerobic conditions. Alkanes, which are major constituents of crude oils, can be degraded under extreme conditions, both aerobically and anaerobically by bacteria and archaea of different phyla. Alkane degraders possess exclusive metabolic pathways and survival strategies, which involve the use of protein and RNA chaperones, compatible solutes, biosurfactants, and exopolysaccharide production for self-protection during harsh environmental conditions such as oxidative and osmotic stress, and ionic nutrient-shortage. Recent findings suggest that the thermophilic sulfate-reducing archaeon Archaeoglobus fulgidus uses a novel alkylsuccinate synthase for long-chain alkane degradation, and the thermophilic Candidatus Syntrophoarchaeum butanivorans anaerobically oxidizes butane via alkyl-coenzyme M formation. In addition, gene expression data suggest that extremophiles produce energy via the glyoxylate shunt and the Pta-AckA pathway when grown on a diverse range of alkanes under stress conditions. Alkane degraders possess biotechnological potential for bioremediation because of their unusual characteristics. This review will provide genomic and molecular insights on alkane degraders under extreme conditions.

Electrochemical biotechnologies minimizing the required electrode assemblies

Microbial electrochemical systems (MESs) are expected to be put into practical use as an environmental technology that can support a future environmentally friendly society. However, conventional MESs present a challenge of inevitably increasing initial investment, mainly due to requirements for a large numbers of electrode assemblies. In this review, we introduce electrochemical biotechnologies that are under development and can minimize the required electrode assemblies. The novel biotechnologies, called electro-fermentation and indirect electro-stimulation, can drive specific microbial metabolism by electrochemically controlling intercellular and extracellular redox states, respectively. Other technologies, namely electric syntrophy and microbial photo-electrosynthesis, obviate the need for electrode assemblies, instead stimulating targeted reactions by using conductive particles to create new metabolic electron flows.

Biodegradation of polycyclic aromatic hydrocarbons: Using microbial bioelectrochemical systems to overcome an impasse

Polycyclic aromatic hydrocarbons (PAHs) are hardly biodegradable carcinogenic organic compounds. Bioremediation is a commonly used method for treating PAH contaminated environments such as soils, sediment, water bodies and wastewater. However, bioremediation has various drawbacks including the low abundance, diversity and activity of indigenous hydrocarbon degrading bacteria, their slow growth rates and especially a limited bioavailability of PAHs in the aqueous phase. Addition of nutrients, electron acceptors or co-substrates to enhance indigenous microbial activity is costly and added chemicals often diffuse away from the target compound, thus pointing out an impasse for the bioremediation of PAHs. A promising solution is the adoption of bioelectrochemical systems. They guarantee a permanent electron supply and withdrawal for microorganisms, thereby circumventing the traditional shortcomings of bioremediation. These systems combine biological treatment with electrochemical oxidation/reduction by supplying an anode and a cathode that serve as an electron exchange facility for the biocatalyst. Here, recent achievements in polycyclic aromatic hydrocarbon removal using bioelectrochemical systems have been reviewed. This also concerns PAH precursors: total petroleum hydrocarbons and diesel. Removal performances of PAH biodegradation in bioelectrochemical systems are discussed, focussing on configurational parameters such as anode and cathode designs as well as environmental parameters like porosity, salinity, adsorption and conductivity of soil and sediment that affect PAH biodegradation in BESs. The still scarcely available information on microbiological aspects of bioelectrochemical PAH removal is summarised here. This comprehensive review offers a better understanding of the parameters that affect the removal of PAHs within bioelectrochemical systems. In addition, future experimental setups are proposed in order to study syntrophic relationships between PAH degraders and exoelectrogens. This synopsis can help as guide for researchers in their choices for future experimental designs aiming at increasing the power densities and PAH biodegradation rates using microbial bioelectrochemistry.

How to access and exploit natural resources sustainably: petroleum biotechnology

As we transition from fossil fuel reliance to a new energy future, innovative microbial biotechnologies may offer new routes to maximize recovery from conventional and unconventional energy assets; as well as contributing to reduced emission pathways and new technologies for carbon capture and utilization. Here we discuss the role of microbiology in petroleum biotechnologies in relation to addressing UN Sustainable Development Goal 12 (ensure sustainable consumption and production patterns), with a focus on microbially‐mediated energy recovery from unconventionals (heavy oil to methane), shale gas and fracking, bioelectrochemical systems for the production of electricity from fossil fuel resources, and innovations in synthetic biology. Furthermore, using wastes to support a more sustainable approach to fossil fuel extraction processes is considered as we undertake the move towards a more circular global economy.

How to access and exploit natural resources sustainably: petroleum biotechnology.

Bioelectroventing: an electrochemical-assisted bioremediation strategy for cleaning-up atrazine-polluted soils

The absence of suitable terminal electron acceptors (TEA) in soil might limit the oxidative metabolism of environmental microbial populations. Bioelectroventing is a bioelectrochemical strategy that aims to enhance the biodegradation of a pollutant in the environment by overcoming the electron acceptor limitation and maximizing metabolic oxidation. Microbial electroremediating cells (MERCs) are devices that can perform such a bioelectroventing. We also report an overall profile of the ¹⁴ C-ATR metabolites and ¹⁴ C mass balance in response to the different treatments. The objective of this work was to use MERC principles, under different configurations, to stimulate soil bacteria to achieve the complete biodegradation of the herbicide ¹⁴ C-atrazine (ATR) to ¹⁴ CO₂ in soils. Our study concludes that using electrodes at a positive potential [+600 mV (versus Ag/AgCl)] ATR mineralization was enhanced by 20-fold when compared to natural attenuation in electrode-free controls. Furthermore, ecotoxicological analysis of the soil after the bioelectroventing treatment revealed an effective clean-up in < 20 days. The impact of electrodes on soil bioremediation suggests a promising future for this emerging environmental technology.

Cable Bacteria and the Bioelectrochemical Snorkel: The Natural and Engineered Facets Playing a Role in Hydrocarbons Degradation in Marine Sediments

The composition and metabolic traits of the microbial communities acting in an innovative bioelectrochemical system were here investigated. The system, known as Oil Spill Snorkel, was recently developed to stimulate the oxidative biodegradation of petroleum hydrocarbons in anoxic marine sediments. Next Generation Sequencing was used to describe the microbiome of the bulk sediment and of the biofilm growing attached to the surface of the electrode. The analysis revealed that sulfur cycling primarily drives the microbial metabolic activities occurring in the bioelectrochemical system. In the anoxic zone of the contaminated marine sediment, petroleum hydrocarbon degradation occurred under sulfate-reducing conditions and was lead by different families of Desulfobacterales (46% of total OTUs). Remarkably, the occurrence of filamentous Desulfubulbaceae, known to be capable to vehicle electrons deriving from sulfide oxidation to oxygen serving as a spatially distant electron acceptor, was demonstrated. Differently from the sediment, which was mostly colonized by Deltaproteobacteria, the biofilm at the anode hosted, at high extent, members of Alphaproteobacteria (59%) mostly affiliated to Rhodospirillaceae family (33%) and including several known sulfur- and sulfide-oxidizing genera. Overall, we showed the occurrence in the system of a variety of electroactive microorganisms able to sustain the contaminant biodegradation alone or by means of an external conductive support through the establishment of a bioelectrochemical connection between two spatially separated redox zones and the preservation of an efficient sulfur cycling.

Electrobioremediation of oil spills

Annually, thousands of oil spills occur across the globe. As a result, petroleum substances and petrochemical compounds are widespread contaminants causing concern due to their toxicity and recalcitrance. Many remediation strategies have been developed using both physicochemical and biological approaches. Biological strategies are most benign, aiming to enhance microbial metabolic activities by supplying limiting inorganic nutrients, electron acceptors or donors, thus stimulating oxidation or reduction of contaminants. A key issue is controlling the supply of electron donors/acceptors. Bioelectrochemical systems (BES) have emerged, in which an electrical current serves as either electron donor or acceptor for oil spill bioremediation. BES are highly controllable and can possibly also serve as biosensors for real time monitoring of the degradation process. Despite being promising, multiple aspects need to be considered to make BES suitable for field applications including system design, electrode materials, operational parameters, mode of action and radius of influence. The microbiological processes, involved in bioelectrochemical contaminant degradation, are currently not fully understood, particularly in relation to electron transfer mechanisms. Especially in sulfate rich environments, the sulfur cycle appears pivotal during hydrocarbon oxidation. This review provides a comprehensive analysis of the research on bioelectrochemical remediation of oil spills and of the key parameters involved in the process.

Electrolysis-driven bioremediation of crude oil-contaminated marine sediments

Bioremediation is an effective technology to tackle crude oil spill disasters, which takes advantage of the capacity of naturally occurring microorganisms to degrade petroleum hydrocarbons under a range of environmental conditions. The enzymatic process of breaking down oil is usually more rapid in the presence of oxygen. However, in contaminated sediments, oxygen levels are typically too low to sustain the rapid and complete biodegradation of buried hydrocarbons. Here, we explored the possibility to electrochemically manipulate the redox potential of a crude oil-contaminated marine sediment in order to establish, in situ, conditions that are conducive to contaminants biodegradation by autochthonous microbial communities. The proposed approach is based on the exploitation of low-voltage (2V) seawater electrolysis to drive oxygen generation (while minimizing chlorine evolution) on Dimensionally Stable Anodes (DSA) placed within the contaminated sediment. Results, based on a laboratory scale setup with chronically polluted sediments spiked with crude oil, showed an increased redox potential and a decreased pH in the vicinity of the anode of 'electrified' treatments, consistent with the occurrence of oxygen generation. Accordingly, hydrocarbons biodegradation was substantially accelerated (up to 3-times) compared to 'non-electrified' controls, while sulfate reduction was severely inhibited. Intermittent application of electrolysis proved to be an effective strategy to minimize the energy requirements of the process, without adversely affecting degradation performance. Taken as a whole, this study suggests that electrolysis-driven bioremediation could be a sustainable technology for the management of contaminated sediments.

Bacterial diversity in oil-polluted marine coastal sediments

Marine environments harbour a persistent microbial seed which can be shaped by changes of the environmental conditions such as contamination by petroleum components. Oil spills, together with small but continuous discharges of oil from transportation and recreational activities, are important sources of hydrocarbon pollution within the marine realm. Consequently, prokaryotic communities have become well pre-adapted toward oil pollution, and many microorganisms that are exposed to its presence develop an active degradative response. The natural attenuation of oil pollutants, as has been demonstrated in many sites, is modulated according to the intrinsic environmental properties such as the availability of terminal electron acceptors and elemental nutrients, together with the degree of pollution and the type of hydrocarbon fractions present. Whilst dynamics in the bacterial communities in the aerobic zones of coastal sediments are well characterized and the key players in hydrocarbon biodegradation have been identified, the subtidal ecology of the anaerobic community is still not well understood. However, current data suggest common patterns of response in these ecosystems.