Effect of Ensiling Density and Storage Temperature on Fermentation Quality, Bacterial Community, and Nitrate Concentration of Sorghum-Sudangrass Silage

Sustainable use of agricultural residues to improve corn silage quality: Co-ensiling with oregano oil residues

The study aimed to evaluate the effect of oregano essential oil extraction residues (ORES) on the fermentation quality of corn silage. Non-fungal infected (NFI) and fungal infected (FI) corn were ensiled with 20% (wet weight) of ORES for 180 d. The inclusion of ORES delayed pH decline regardless of fungal infection. The inclusion of ORES did not adversely affect lactic acid (LA) production in NFI silages but retarded the initial LA fermentation of FI silages. Co-ensiling corn with ORES significantly decreased ethanol content. Co-ensiling FI corn with ORES significantly increased the fungal Chao1 and Shannon indices compared to FI-CON silages but did not affect the bacterial Chao1 and Shannon indices. The fungal infection aggravated the risk of Paenibacillus and Clostridium contamination, which was mitigated by co-ensiling with ORES. In conclusion, fungal infection suppressed ensiling fermentation, and heightened the risk of proliferation of undesirable bacteria, while ORES relieved these risks. Ensiling ORES with corn as forages is a potential and promising strategy for the efficient reusing of agro-industrial waste.

Suitable fermentation temperature of forage sorghum silage increases greenhouse gas production: Exploring the relationship between temperature, microbial community, and gas production

Silage is an excellent method of feed preservation; however, carbon dioxide, methane and nitrous oxide produced during fermentation are significant sources of agricultural greenhouse gases. Therefore, determining a specific production method is crucial for reducing global warming. The effects of four temperatures (10 °C, 20 °C, 30 °C, and 40 °C) on silage quality, greenhouse gas yield and microbial community composition of forage sorghum were investigated. At 20 °C and 30 °C, the silage has a lower pH value and a higher lactic acid content, resulting in higher silage quality and higher total gas production. In the first five days of ensiling, there was a significant increase in the production of carbon dioxide, methane, and nitrous oxide. After that, the output remained relatively stable, and their production at 20 °C and 30 °C was significantly higher than that at 10 °C and 40 °C. Firmicutes and Proteobacteria were the predominant silage microorganisms at the phylum level. Under the treatment of 20 °C, 30 °C, and 40 °C, Lactobacillus had already dominated on the second day of silage. However, low temperatures under 10 °C slowed down the microbial community succession, allowing, bad microorganisms such as Chryseobacterium, Pantoea and Pseudomonas dominate the fermentation, in the early stage of ensiling, which also resulted in the highest bacterial network complexity. According to random forest and structural equation model analysis, the production of carbon dioxide, methane and nitrous oxide is mainly affected by microorganisms such as Lactobacillus, Klebsiella and Enterobacter, and temperature influences the activity of these microorganisms to mediate gas production in silage. This study helps reveal the relationship between temperature, microbial community and greenhouse gas production during silage fermentation, providing a reference for clean silage fermentation.

Effects of different temperature and density on quality and microbial population of wilted alfalfa silage

In this experiment, alfalfa silage with different packing densities (500 kg/m3、600 kg/m3 and 700 kg/m3) was prepared under the conditions of outdoor high temperature and indoor room temperature, respectively. At the same time, the same lactobacillus additive was used for fermentation in each density treatment group. The chemical composition, fermentation quality and microbial community of alfalfa silage were analyzed. The results showed that the contents of dry matter (DM) and water-soluble carbohydrate (WSC) decreased with the increase of density during fermentation at high temperature. At the same time, when the density is 600 kg/m³, CP (crude protein) content is the highest, ADF (acid detergent fiber) content is the lowest. The contents and pH values of neutral detergent fiber (NDF), lactic acid (LA) and lactic acid bacteria (LAB) were significantly affected by temperature (p < 0.05). Density had significant effects on DM, NDF, WSC and LA contents (p < 0.05). The interaction between temperature and density had significant effects on the content of ADF and LAB (p < 0.05). At the same time, the abundance of Lactiplantibacillus plantarum in high temperature fermented silage was lower than that in normal temperature fermented feed. The number of Lactiplantibacillus plantarum in room temperature treatment group decreased with the increase of density. In summary, this study clarified the effects of different temperature and density on alfalfa fermentation quality and microbial community, and clarified that the density should be reasonably controlled within 600 kg/m³ during alfalfa silage, providing theoretical support for production practice.

Impact of Additives and Packing Density on Fermentation Weight Loss, Microbial Diversity, and Fermentation Quality of Rape Straw Silage

To investigate the effects of the combined addition of Lactiplantibacillus plantarum and sucrose on the fermentation weight loss (FWL), fermentation quality, and microbial community structure of ensiled rape straw under varying packing density conditions. After harvesting, the rapeseed straw was collected, cut into 1-2 cm pieces, and sprayed with sterile water to adjust the moisture content to 60%. The straw was then divided into two groups: one treated with additives (1 × 105 CFU/g fresh material of Lactiplantibacillus plantarum and 10 kg/t fresh material of sucrose), and the other sprayed with an equivalent amount of sterile water as the control (CK). The treated materials were thoroughly mixed and packed into silos at densities of 450, 500, and 550 kg/m3. FWL was recorded on days 1, 3, 6, 15, 20, and 45 of fermentation. On day 45, the samples were analyzed for fermentation quality, microbial counts, and microbial diversity. FWL increased significantly (p < 0.05) in both the treated (LS) and control groups during fermentation. The LS group showed higher lactic acid (LA) levels (p < 0.05) and lower ammonia nitrogen levels (p < 0.05) compared to CK. The CK group had significantly higher (p < 0.05) counts of Coliforms and lower bacterial counts (p < 0.05) than LS. The dominant genera in the silage were Xanthomonas, Lactiplantibacillus plantarum, and Lentilactobacillus. In the LS group, the relative abundances of Lactiplantibacillus plantarum and Lentilactobacillus ranged from 16.93% to 20.43% and 15.63% to 27.46%, respectively, with their combined abundance being higher than in CK. At a packing density of 500 kg/m3, the relative abundances of Lactiplantibacillus plantarum and Lentilactobacillus in the LS group were significantly higher (p < 0.05) than in CK. Increasing packing density and applying additives to rape straw silage effectively reduced FWL, improved fermentation quality, boosted the relative abundance of beneficial lactic acid bacteria, and decreased the presence of undesirable bacteria such as Enterobacter and Bacillus.

Effect of Regulation of Whole-Plant Corn Silage Inoculated with Lactobacillus buchneri or Bacillus licheniformis Regarding the Dynamics of Bacterial and Fungal Communities on Aerobic Stability

Enhancing the aerobic stability of whole-plant corn silage is essential for producing high-quality silage. Our research assessed the effect of inoculation with Lactobacillus buchneri or Bacillus licheniformis and its modulation of the bacterial and fungal microbial community structure in an aerobic stage of whole-plant corn silage. Following treatment with a distilled sterile water control, Lactobacillus buchneri, and Bacillus licheniformis (2 × 105 cfu/g), whole-plant corn was ensiled for 60 days. Samples were taken on days 0, 3, and 7 of aerobic exposure, and the results showed that inoculation with Lactobacillus buchneri or Bacillus licheniformis improved the aerobic stability of silage when compared to the effect of the control (p < 0.05). Inoculation with Bacillus licheniformis attenuated the increase in pH value and the decrease in lactic acid in the aerobic stage (p < 0.05), reducing the filamentous fungal counts. On the other hand, inoculation with Lactobacillus buchneri or Bacillus licheniformis increased the diversity of the fungal communities (p < 0.05), complicating the correlation between bacteria or fungi, reducing the relative abundance of Acetobacter and Paenibacillus in bacterial communities, and inhibiting the tendency of Monascus to replace Issatchenkia in fungal communities, thus delaying the aerobic spoilage process. Due to the prevention of the development of aerobic spoilage microorganisms, the silage injected with Lactobacillus buchneri or Bacillus licheniformis exhibited improved aerobic stability.

Influences of Growth Stage and Ensiling Time on Fermentation Characteristics, Nitrite, and Bacterial Communities during Ensiling of Alfalfa

This study examined the impacts of growth stage and ensiling duration on the fermentation characteristics, nitrite content, and bacterial communities during the ensiling of alfalfa. Harvested alfalfa was divided into two groups: vegetative growth stage (VG) and late budding stage (LB). The fresh alfalfa underwent wilting until reaching approximately 65% moisture content, followed by natural fermentation. The experiment followed a completely randomized design, with samples collected after the wilting of alfalfa raw materials (MR) and on days 1, 3, 5, 7, 15, 30, and 60 of fermentation. The growth stage significantly influenced the chemical composition of alfalfa, with crude protein content being significantly higher in the vegetative growth stage alfalfa compared to that in the late budding stage (p < 0.05). Soluble carbohydrates, neutral detergent fiber, and acid detergent fiber content were significantly lower in the vegetative growth stage compared to the late budding stage (p < 0.05). Nitrite content, nitrate content, nitrite reductase activity, and nitrate reductase activity were all significantly higher in the vegetative growth stage compared to the late budding stage (p < 0.05). In terms of fermentation parameters, silage from the late budding stage exhibited superior characteristics compared to that from the vegetative growth stage. Compared to the alfalfa silage during the vegetative growth stage, the late budding stage group exhibited a higher lactate content and lower pH level. Notably, butyric acid was only detected in the silage from the vegetative growth stage group. Throughout the ensiling process, nitrite content, nitrate levels, nitrite reductase activity, and nitrate reductase activity decreased in both treatment groups. The dominant lactic acid bacteria differed between the two groups, with Enterococcus being predominant in vegetative growth stage alfalfa silage, and Weissella being predominant in late budding stage silage, transitioning to Lactiplantibacillus in the later stages of fermentation. On the 3rd day of silage fermentation, the vegetative growth stage group exhibited the highest abundance of Enterococcus, which subsequently decreased to its lowest level on the 15th day. Correlation analysis revealed that lactic acid bacteria, including Limosilactobacillus, Levilactobacillus, Loigolactobacillus, Pediococcus, Lactiplantibacillus, and Weissella, played a key role in nitrite and nitrate degradation in alfalfa silage. The presence of nitrite may be linked to Erwinia, unclassified_o__Enterobacterales, Pantoea, Exiguobacterium, Enterobacter, and Allorhizobium-Neorhizobium-Pararhizobium-Rhizobium.

Natural fermentation quality, bacteria, and functional profiles of three cuttings of alfalfa silage in a year in Inner Mongolia, China

Alfalfa is harvested two or three times a year in central and western Inner Mongolia, China. However, the variations in bacterial communities as affected by wilting and ensiling, and the ensiling characteristics of alfalfa among the different cuttings, are not fully understood. To enable a more complete evaluation, alfalfa was harvested three times a year. At each time of cutting, alfalfa was harvested at early bloom, wilted for 6 h, and then ensiled in polyethylene bags for 60 days. The bacterial communities and nutritional components of fresh alfalfa(F), wilted alfalfa(W) and ensiled alfalfa(S), and the fermentation quality and functional profile of bacterial communities of the three cuttings alfalfa silage, were then analyzed. Functional characteristics of silage bacterial communities were evaluated according to the Kyoto Encyclopedia of Genes and Genomes. The results showed that all nutritional components, fermentation quality, bacterial communities, carbohydrate, amino acid metabolism and key enzymes of bacterial communities were influenced by cutting time. The species richness of F increased from the first cutting to the third cutting; it was not changed by wilting, but was decreased by ensiling. At phylum level, Proteobacteria were more predominant than other bacteria, followed by Firmicutes (0.063–21.39%) in F and W in the first and second cuttings. Firmicutes (96.66–99.79%) were more predominant than other bacteria, followed by Proteobacteria (0.13–3.19%) in S in the first and second cuttings. Proteobacteria, however, predominated over all other bacteria in F, W, or S in the third cutting. The third-cutting silage showed the highest levels of dry matter, pH and butyric acid (p &lt; 0.05). Higher levels of pH and butyric acid were positively correlated with the most predominant genus in silage, and with Rosenbergiella and Pantoea. The third-cutting silage had the lowest fermentation quality as Proteobacteria were more predominant. This suggested that, compared with the first and second cutting, the third cutting is more likely to result in poorly preserved silage in the region studied.

Effects of Bacillus subtilis or Lentilactobacillus buchneri on aerobic stability, and the microbial community in aerobic exposure of whole plant corn silage

This study aimed to evaluate the effects of Bacillus subtilis or Lentilactobacillus buchneri on the fermentation quality, aerobic stability, and bacterial and fungal communities of whole plant corn silage during aerobic exposure. Whole plant corn was harvested at the wax maturity stage, which chopped to a length of approximately 1 cm, and treated with the following: distilled sterile water control, 2.0 × 10⁵ CFU/g of Lentilactobacillus buchneri (LB) or 2.0 × 10⁵ CFU/g of Bacillus subtilis (BS) for 42 days silage. Then, the samples were exposed to air (23-28^°C) after opening and sampled at 0, 18 and 60 h, to investigate fermentation quality, bacterial and fungal communities, and aerobic stability. Inoculation with LB or BS increased the pH value, acetic acid, and ammonia nitrogen content of silage (P < 0.05), but it was still far below the threshold of inferior silage, the yield of ethanol was reduced (P < 0.05), and satisfactory fermentation quality was achieved. With the extension of the aerobic exposure time, inoculation with LB or BS prolonged the aerobic stabilization time of silage, attenuated the trend of pH increase during aerobic exposure, and increased the residues of lactic acid and acetic acid. The bacterial and fungal alpha diversity indices gradually declined, and the relative abundance of Basidiomycota and Kazachstania gradually increased. The relative abundance of Weissella and unclassified_f_Enterobacteria was higher and the relative abundance of Kazachstania was lower after inoculation with BS compared to the CK group. According to the correlation analysis, Bacillus and Kazachstania are bacteria and fungi that are more closely related to aerobic spoilage and inoculation with LB or BS could inhibit spoilage. The FUNGuild predictive analysis indicated that the higher relative abundance of fungal parasite-undefined saprotroph in the LB or BS groups at AS2, may account for its good aerobic stability. In conclusion, silage inoculated with LB or BS had better fermentation quality and improved aerobic stability by effectively inhibiting the microorganisms that induce aerobic spoilage.

Fermentation weight loss, fermentation quality, and bacterial community of ensiling of sweet sorghum with lactic acid bacteria at different silo densities

Sweet sorghum is an important forage in arid and semi-arid climatic regions. This study aimed to reveal the fermentation weight loss (FWL), fermentation quality, and bacterial community of ensiling of sweet sorghum with lactic acid bacteria LAB; (Lactiplantibacillus plantarum and Lentilactobacillus buchneri) at different silo densities. For this study, sweet sorghum was harvested at the first spikelet of inflorescence stage and ensiled without or with LAB (CK or L) in polyethylene laboratory-scale silos (diameter, 20 cm; height, 30 cm) at densities of 650 (CK_650 and L_650), 700 (CK_700 and L_700), and 750 kg/m3 (CK_750 and L_750), respectively. The FWL, fermentation quality, microbial counts, and bacterial community of the silage were assessed after 100 days of ensiling. L_750 had a lower FWL than CK_650, _700, and _750 after 100 days of ensiling (P &lt; 0.005), and the FWL was affected by silo density and inoculating LAB (P &lt; 0.005). All silages had low pH (&lt;4.0) and ammonia nitrogen content (&lt;50 g/kg total nitrogen) and did not contain propionic and butyric acids; moreover, inoculating LAB increased lactic and acetic acids (P &lt; 0.005). Bacterial communities in inoculated and uninoculated silages were clustered together, respectively, and clearly separated from each other. The total abundance of Lactiplantibacillus and Lentilactobacillus in fresh forage was &lt;1%. Lactiplantibacillus had the highest abundance in all silages (from 71.39 to 93.27%), followed by Lentilactobacillus (from 3.59 to 27.63%). Inoculating LAB increased the abundance of Lentilactobacillus in each silo density (P &lt; 0.005) and decreased Lactiplantibacillus in the silage in densities of 700 and 750 kg/m3 (P &lt; 0.005); moreover, increasing silo density decreased Lactiplantibacillus abundance and increased Lentilactobacillus abundance in inoculated silages (P &lt; 0.005). Overall, sweet sorghum silage showed satisfactory fermentation quality, with a density of no &lt;650 kg/m3, and inoculating LAB improved fermentation quality and reduced FWL. Lactiplantibacillus and Lentilactobacillus presented as minor taxa in fresh sweet sorghum and dominated the bacterial community of all silages. Inoculating LAB was the main factor affecting the bacterial community of sweet sorghum silage. Moreover, inoculating LAB and increasing silo density can contribute to the decreasing Lactiplantibacillus abundance and increasing Lentilactobacillus abundance.

Effects of Lactic Acid Bacteria Inoculants and Stage-Increased Storage Temperature on Silage Fermentation of Oat on the Qinghai–Tibet Plateau

Ensiling is a simple and effective method of alleviating a shortage of forage for ruminants. This study aimed to investigate the effects of lactic acid bacteria (LAB) inoculants and stage-increased temperature on the fermentation characteristics and chemical composition of oat silage on the Qinghai–Tibet Plateau. The silage was treated with local laboratory inoculant (I) and commercial inoculant (S) and stored at ambient temperature (<10 °C) or stage-increased (5, 10 and 15 days) temperatures of 10 °C and 15 °C for 60 days. The results showed that stage-increased storage temperature can improve silage fermentation. Compared with 10 °C, a stage-increased storage temperature of 15 °C effectively (p < 0.05) promoted the fermentation rate of silage by increasing the dominance of Lactiplantibacillus plantarum, with higher lactic, acetic and propionic acid contents and a lower ammonia-N ratio of the total N and final pH value. Compared with S, treatment with I increased the water-soluble carbohydrate and lactic acid contents and decreased the ammonia-N ratio of the total N and final pH value. This work demonstrated that increasing the storage temperature in stages using a warming infrastructure facilitates the preservation of oat silage in cold regions, and the inoculation of lactic acid bacteria could advance silage fermentation on the Qinghai–Tibet Plateau.

Effect of exogenous microorganisms on the fermentation quality, nitrate degradation and bacterial community of sorghum-sudangrass silage

This study aims to investigate the effects of adding Lactobacillus buchneri (LB), Lactobacillus brevis (LBR) and Bacillus subtilis (BS) on the fermentation quality, nitrate degradation and bacterial community of sorghum-sudangrass silage. The results showed that the addition of LB significantly increased the pH and acetic acid content (p < 0.05), but high-quality silage was obtained. The addition of LBR and BS improved the fermentation quality of sorghum-sudangrass silage. The use of additives reduced the nitrate content in sorghum-sudangrass silage. The LB group increased the release of N₂O at 3–7 days of ensiling (p < 0.05), and LBR and BS increased the release of N₂O at 1–40 days of ensiling (p < 0.05). On the first day of ensiling, all silages were dominated by Weisslla, over 3 days of ensiling all silages were dominated by Lactobacillus. Acinetobacter, Serratia, Aquabacterium, and unclassified_f_enterobacteriaceae showed significant negative correlations with nitrate degradation during sorghum-sudangrass ensiling (p < 0.05). The BS and LBR groups increased the metabolic abundance of denitrification, dissimilatory nitrate reduction, and assimilatory nitrate reduction (p < 0.05). Overall, the additive ensures the fermentation quality of sorghum-sudangrass silage and promotes the degradation of nitrate by altering the bacterial community.