Nitrogen Removal Capacity of Microbial Communities Developing in Compost- and Woodchip-Based Multipurpose Reactive Barriers for Aquifer Recharge With Wastewater

Microbial succession and denitrifying woodchip bioreactor performance at low water temperatures

Mining activities are increasingly recognized for contributing to nitrogen (N) pollution and possibly also to emissions of the greenhouse gas nitrous oxide (N2O) due to undetonated, N-based explosives. A woodchip denitrifying bioreactor, installed to treat nitrate-rich leachate from waste rock dumps in northern Sweden, was monitored for two years to determine the spatial and temporal distribution of microbial communities, including the genetic potential for different N transformation processes, in pore water and woodchips and how this related to reactor N removal capacity. About 80 and 65 % of the nitrate was removed during the first and second operational year, respectively. There was a succession in the microbial community over time and in space along the reactor length in both pore water and woodchips, which was reflected in reactor performance. Nitrate ammonification likely had minimal impact on N removal efficiency due to the low production of ammonium and low abundance of the key gene nrfA in ammonifiers. Nitrite and N2O were formed in the bioreactor and released in the effluent water, although direct N2O emissions from the surface was low. That these unwanted reactive N species were produced at different times and locations in the reactor indicate that the denitrification pathway was temporally as well as spatially separated along the reactor length. We conclude that the succession of microbial communities in woodchip denitrifying bioreactors treating mining water develops slowly at low temperature, which impacts reactor performance.

Assessing the Fate of Benzophenone-Type UV Filters and Transformation Products during Soil Aquifer Treatment: The Biofilm Compartment as Bioaccumulator and Biodegrader in Porous Media

The fate of selected UV filters (UVFs) was investigated in two soil aquifer treatment (SAT) systems, one supplemented with a reactive barrier containing clay and vegetable compost and the other as a traditional SAT reference system. We monitored benzophenone-3 (BP-3) and its transformation products (TPs), including benzophenone-1 (BP-1), 4,4'-dihydroxybenzophenone (4DHB), 4-hydroxybenzophenone (4HB), and 2,2'-dihydroxy-4-methoxybenzophenone (DHMB), along with benzophenone-4 (BP-4) and avobenzone (AVO) in all involved compartments (water, aquifer sediments, and biofilm). The reactive barrier, which enhances biochemical activity and biofilm development, improved the removal of all detected UVFs in water samples. Among monitored UVFs, only 4HB, BP-4, and AVO were detected in sediment and biofilm samples. But the overall retained amounts were several orders of magnitude larger than those dissolved. These amounts were quantitatively reproduced with a specifically developed simple analytical model that consists of a mobile compartment and an immobile compartment. Retention and degradation are restricted to the immobile water compartment, where biofilm absorption was simulated with well-known compound-specific Kow values. The fact that the model reproduced observations, including metabolites detected in the biofilm but not in the (mobile) water samples, supports its validity. The results imply that accumulation ensures significant biodegradation even if the degradation rates are very low and suggest that our experimental findings for UVFs and TPs can be extended to other hydrophobic compounds. Biofilms act as accumulators and biodegraders of hydrophobic compounds.

Microplastic removal in managed aquifer recharge using wastewater effluent

Microplastic (MP) pollution has emerged as a pressing environmental issue, with its impacts on ecosystems and human health yet to be fully understood. This study aims to investigate the presence and distribution of MPs in the soil of a managed aquifer recharge (MAR) system, built with different reactive barriers of natural materials and irrigated with the secondary effluent of a wastewater treatment plant (WWTP). MPs were extracted from reactive barrier material following an approach based on the density separation of MPs with posterior oxidant digestion, combined with visual and chemical characterisation by Fourier-Transform Infrared Spectroscopy (FTIR). The results revealed the widespread occurrence of MPs in the MAR soil samples. MPs concentration in the different barrier materials ranged from 60 to 236 n kg-1. The most dominant morphologies were fragments (60%) and fibers (17%), and the most abundant colour was white (51%), followed by transparent MPs (20%). Polypropylene (PP) was detected in all the samples with an abundance of 47%, followed by polyethylene (PE, 34%). The interplay of barrier composition significantly influences the retention of MPs, with compost (T5) and woodchips (T4) exhibiting the most notable retention rates. Remarkably, the outer layers of the reactive barriers display superior retention compared to the deeper layers. The findings of this study demonstrate the good performance of the MAR system in retaining MPs and contribute to the growing body of knowledge on MPs pollution in freshwater systems while providing insights into the dynamics of MPs transport and accumulation in soil. Such information can inform the development of effective wastewater management strategies to mitigate the impacts of these pollutants on water resources and safeguard the environment.

Linking nitrate removal, carbon cycling, and mobilization of geogenic trace metals during infiltration for managed recharge

We present results from a series of laboratory column studies investigating the impacts of infiltration dynamics and the addition of a soil-carbon amendment (wood mulch or almond shells) on water quality during infiltration for flood-managed aquifer recharge (flood-MAR). Recent studies suggest that nitrate removal could be enhanced during infiltration for MAR through the application of a wood chip permeable reactive barrier (PRB). However, less is understood about how other readily available carbon sources, such as almond shells, could be used as a PRB material, and how carbon amendments could impact other solutes, such as trace metals. Here we show that the presence of a carbon amendment increases nitrate removal relative to native soil, and that there is greater nitrate removal in association with longer fluid retention times (slower infiltration rates). Almond shells promoted more efficient nitrate removal than wood mulch or native soil, but also promoted the mobilization of geogenic trace metals (Mn, Fe, and As) during experiments. Almond shells in a PRB likely enhanced nitrate removal and trace metal cycling by releasing labile carbon, promoting reducing conditions, and providing habitat for microbial communities, the composition of which shifted in response. These results suggest that limiting the amount of bioavailable carbon released by a carbon-rich PRB may be preferred where geogenic trace metals are common in soils. Given the dual threats to groundwater supplies and quality worldwide, incorporating a suitable carbon source into the soil for managed infiltration projects could help to generate co-benefits and avoid undesirable results.

Using integrative samplers to estimate the removal of pharmaceuticals and personal care products in a WWTP and by soil aquifer treatment enhanced with a reactive barrier

The need and availability of freshwater is a major environmental issue, aggravated by climate change. It is necessary to find alternative sources of freshwater. Wastewater could represent a valid option but requires extensive treatment to remove wastewater-borne contaminants, such as contaminants of emerging concern (CECs). It is urgent to develop not only sustainable and effective wastewater treatment techniques, but also water quality assessment methods. In this study, we used polar organic chemical integrative samplers (POCIS) to investigate the presence and abatement of contaminants in an urban wastewater treatment plant (WWTP) and in soil aquifer treatment (SAT) systems (a conventional one and one enhanced with a reactive barrier). This approach allowed us to overcome inter-day and intraday variability of the wastewater composition. Passive sampler extracts were analyzed to investigate contamination from 56 pharmaceuticals and personal care products (PPCPs). Data from the POCIS were used to estimate PPCPs' removal efficiency along the WWTP and the SAT systems. A total of 31 compounds, out of the 56 investigated, were detected in the WWTP influent. Removal rates along WWTP were highly variable (16-100 %), with benzophenone-3, benzophenone-1, parabens, ciprofloxacin, ibuprofen, and acetaminophen as the most effectively removed chemicals. The two SAT systems yielded much higher elimination rates than those achieved through the primary and secondary treatments together. The SAT system that integrated a reactive barrier, based on sustainable materials to promote enhanced elimination of CECs, was significantly more efficient than the conventional one. The removal of the recalcitrant carbamazepine and its epoxy- metabolite was especially remarkable in this SAT, with removal rates between 69-81 % and 63-70 %, respectively.

Pathways and efficiency of nitrogen attenuation in wastewater effluent through soil aquifer treatment

Soil Aquifer Treatment (SAT) is used to increase groundwater resources and enhance the water quality of wastewater treatment plant (WWTP) effluents. The resulting water quality needs to be assessed. In this study, we investigate attenuation pathways of nitrogen (N) compounds (predominantly NH₄⁺) from a secondary treatment effluent in pilot SAT systems: both a conventional one (SAT-Control system) and one operating with a permeable reactive barrier (PRB) to provide extra dissolved organic carbon to the recharged water. The goal is to evaluate the effectiveness of the two systems regarding N compounds by means of chemical and isotopic tools. Water chemistry (NO₃^-, NH₄⁺, Non-Purgeable Dissolved Organic Carbon (NPDOC), and O₂) and isotopic composition of NO₃^- (ẟ¹⁵N-NO₃^- and ẟ¹⁸O-NO₃^-) and NH₄⁺ (ẟ¹⁵N-NH₄⁺) were monitored in the inflow and at three different sections and depths along the aquifer flow path. Chemical and isotopic results suggest that coupled nitrification-denitrification were the principal mechanisms responsible for the migration and distribution of inorganic N in the systems and that nitrification rate decreased with depth. At the end of the study period, 66% of the total N in the solution was removed in the SAT-PRB system and 69% in the SAT-Control system, measured at the outlet of the systems. The residual N in solution in the SAT-PRB system had an approximately equal proportion of N-NH₄⁺ and N-NO₃^- while in the SAT-Control system, the residual N in solution was primarily N-NO₃^-. Isotopic data also confirmed complete NO₃^- degradation in the systems from July to September with the possibility of mixing newly generated NO₃^- with the residual NO₃^- in the substrate pool.