The Stability, Microstructure, and Microrheological Properties of Monascus Pigment Double Emulsions Stabilized by Polyglycerol Polyricinoleate and Soybean Protein Isolate

Encapsulation of Monascus Pigments Using Enzyme-Modified Yeast Protein-Polysaccharide Complex Pickering Emulsions to Increase Its Stability During Storage

Yeast protein (YP) is rich in nutrients, but its emulsifying properties, especially emulsifying stability, still need to be improved. In this study, cationic polysaccharide chitosan (CS) and anionic polysaccharide xanthan gum (XG) were selected to enhance the emulsifying properties of protein emulsions. The preparation conditions of the emulsions were optimized by calculating particle size, zeta potential, emulsifying activity index, emulsifying stability index, and emulsifying capacity index, as well as macroscopic observation. The optimized emulsions were characterized using confocal laser scanning microscopy, rheology, Raman spectroscopy, color difference analysis, and storage stability. The results showed that the stability of yeast protein/modified yeast protein-chitosan (YP/EYP-CS) emulsions was better at pH 5.5, with a protein:polysaccharide ratio of 1:1 and an oil phase addition of 40%, while the stability of yeast protein/modified yeast protein-xanthan gum (YP/EYP-XG) emulsions was better at pH 3.5, with a protein:polysaccharide ratio of 1:1 and an oil phase addition of 50%. Further analysis indicated that the emulsions with CS had smaller particle sizes and lower initial viscosities, but more hydrogen bonds and better encapsulation of Monascus pigment (MP), especially the EYP-CS emulsion (81.18%). In contrast, the emulsions with XG had uniform droplet sizes and high thermal stability and exhibited obvious shear thinning behavior with increasing shear rates. The network structure of the emulsions was mainly elastic, and the hydrophobic interaction was stronger. This study provides insights into the utilization of yeast protein in the food industry and the development of emulsification systems.

Teratogenic effect evaluation of Monascus red oral exposure to pregnant rats and their gut microbiota

Monascus red (MR) is widely used as a natural food colorant and preservative in East Asia. However, the potential effects of MR during pregnancy remains unknown. In this study, MR was administrated to Sprague-Dawley (SD) rats at doses of 0, 0.50, 1.58, and 5.00 g/kg bw on gestational days 6-15 by oral gavage. In the maternal and embryo-fetal examinations, there were no marked toxicities in terms of general clinical signs, body weight, food consumption, serum endocrine indices, organ weights, thyroid histopathology, examinations of uterine contents and fetuses. In the gut microbiota analysis, the 5.00 g/kg bw dose of MR decreased the α diversity and slightly changed their community structure at the genus level. Yet no marked toxicities in maternal animals or embryo-fetal development were observed. The no-observed-adverse-effect-level (NOAEL) of the maternal and developmental toxicity through oral exposure to MR was 5.00 g/kg bw, the highest dose tested in rats.

Encapsulation of Monascus pigments in gel in oil in water (G/O/W) double emulsion system based on sodium caseinate and guar gum

In this study, a gel in oil in water (G/O/W) double emulsion system was developed with the objective of effectively encapsulating Monascus pigments and enhancing its stability. To this end, various formulations were prepared using guar gum co-dissolved with Monascus pigments in the internal phase and sodium caseinate as an outer phase surfactant. Different parameters were examined, including emulsion stability, encapsulation efficiency, rheological and tribological properties, as well as the light and thermal stability of the encapsulated Monascus pigments. The results demonstrated that Monascus pigments were effectively encapsulated in the G/O/W, with an encapsulation efficiency exceeding 90 %. The formulated system exhibited a relatively small particle size, which decreased with increasing guar gum and the external emulsifier contents. This resulted in an increase in viscosity accompanied by the formation of a gel-like structure and improved tribological properties, thereby enhancing the system's stability. The system with 1-1.25 % guar gum and 2.5 % sodium caseinate exhibited the highest stability for Monascus pigments, making them more resistant to heat and light. These findings have the potential to expand applications of Monascus pigments by providing a stable and effective encapsulation and delivery system that can also be utilized in the development of healthier food products.

Stability of oil-in-water emulsion and immunomodulating activity in S180 tumor-bearing mice

The stability and nutritional integrity of emulsions are susceptible to various factors including thermal treatment, solid-liquid ratio, and sterilization. In this study, the physicochemical stability and immunomodulatory activities of an oil-in-water emulsion containing immune peptides (TUFSE) were assessed through particle size, zeta potential, related cytokines, and so on. When the temperature was 70°C and a solid-liquid ratio of 1:4, the emulsion revealed stability at high-pressure homogenization, with the small particle size. The loss rates of vitamins were 8.57%-62.26% in 6 months at 25°C. After treatment with cyclophosphamide (CTX), lymphocyte proliferation activity in TUFSE-H group increased (p < 0.05), and immune globulin levels were notably elevated (p < 0.05) in TUFSE groups compared to model group. It confirms the parameters of the emulsion, suggesting its ability to be prepared with minimal vitamin loss while simultaneously improving the disease status in CTX-treated tumor-bearing mice. It shows potential as an immune-enhancing supplement with significant potential value. PRACTICAL APPLICATION: This study validated the parameters of the oil-in-water emulsion and showed that it can be stably prepared with minor vitamin loss while simultaneously improving the disease status in CTX-treated tumor-bearing mice. TUFSE-H group exhibited a notable increase in lymphocytes proliferation activity, whereas serum cytokines and immune globulin levels were elevated compared to MC group, indicating its potential as an immune-enhancing supplement with substantial value.

Stability mechanism of Monascus pigment-soy protein isolate-maltodextrin complex

BACKGROUND

Monascus pigment (MP) is a natural food coloring with vital physiological functions but prone to degradation and color fading under light conditions.

RESULTS

This study investigated the effect of complex formation of soybean protein isolate (SPI), maltodextrin (MD), and MP on the photostability of MP. Light stability was assessed through retention rate and color difference. Fluorescence spectroscopy (FS), circular dichroism (CD), Fourier-transform infrared (FTIR) spectroscopy, and X-ray diffraction (XRD) explored MP, SPI, and MD interactions, clarifying the MP-SPI-MD complex mechanism on the light stability of MP. Microstructure and differential scanning calorimetry (DSC) analyzed the morphology and thermal properties. The retention rate of MP increased to approximately 80%, and minimal color difference was observed when adding SPI and MD simultaneously. FS revealed hydrophobic interaction between MP and SPI. FTIR analysis showed intensity changes and peak shifts in amide I band and amide II band, which proved the hydrophobic interaction. CD showed a decrease in α-helix content and an increase in β-sheet content after complex formation, indicating strengthened hydrogen bonding interactions. Scanning electron microscopy (SEM) analysis demonstrated that MP was attached to the surface and interior of complexes. XRD showed MP as crystalline, while SPI and MD were amorphous, complexes exhibited weakened or absent peaks, suggesting MP encapsulation. The results of DSC were consistent with XRD.

CONCLUSION

SPI and MD enveloped MP through hydrogen bonding and hydrophobic interaction, ultimately enhancing its light stability and providing insights for pigment-protein-polysaccharide interactions and improving pigment stability in the food industry. © 2024 Society of Chemical Industry.

Biomacromolecular carriers based hydrophobic natural products for potential cancer therapy

Cancer is the second leading cause of death worldwide. It was estimated that 90 % of cancer-related deaths were attributable to the development of multi-drug resistance (MDR) during chemotherapy, which results in ineffective chemotherapy. Hydrophobic natural products plays a pivotal role in the field of cancer therapy, with the potential to reverse MDR in tumor cells, thereby enhancing the efficacy of tumor therapy. However, their targeted delivery is considered a major hurdle in their application. The advent of numerous approaches for encapsulating bioactive ingredients in the nanodelivery systems has improved the stability and targeted delivery of these biomolecules. The manuscript comprehensively analyses the nanodelivery systems of bioactive compounds with potential cancer therapy applications, including liposomes, emulsions, solid lipid nanoparticles (NPs), and polymeric NPs. Then, the advantages and disadvantages of various nanoagents in the treatment of various cancer types are critically discussed. Further, the application of multiple-compbine delivery methods to overcome the limitations of single-delivery have need critically analyzed, which thus could help in the designing nanodrug delivery systems for bioactive compounds in clinical settings. Therefore, the review is timely and important for development of efficient nanodelivery systems involving hydrophobic natural products to improve pharmacokinetic properties for effective cancer treatment.

Fabrication and stability of W/O/W emulsions stabilized by gum arabic and polyglycerol polyricinoleate

BACKGROUND

In order to study the effect of adsorption of surfactant at the two interfacial layers on emulsion stability, the kinetically stable water-in-oil-in-water (W/O/W) emulsion carriers were prepared using polyglycerol polyricinoleate (PGPR) and gum arabic (GA) as emulsifiers. The relationship between the adsorption of the surfactant and the stability mechanism of the emulsions was elucidated.

RESULTS

When the contents of PGPR and GA were low, the interfaces between oil and the inner and outer water phases, respectively, could not be completely covered. However, when the concentration of PGPR was higher than 60 g kg-1 , the excess PGPR was adsorbed on the interface between the oil phase and the outer water phase. When the concentration of GA reached 80 g kg-1 , more GA was adsorbed to the oil-in-water interface. Moreover, the presence of PGPR on the interface could reduce the adsorption capacity of GA. Two types of kinetically stable emulsions were obtained by optimizing the interface composition (60 g kg-1 GA/80 g kg-1 PGPR and 60 g kg-1 PGPR/80 g kg-1 GA). The kinetically stable W/O/W emulsions prepared in this study were successfully used to encapsulate a hydrophilic vitamin (vitamin B12) with an encapsulation efficiency (EE) of 80% and release efficiency (RE) of 95%. The interfacial adsorption GA can accelerate the hydrolysis of fat.

CONCLUSION

Overall, this study provides a new strategy for the preparation of W/O/W emulsions, which might be beneficial for application in food, cosmetic, chemical, and pharmaceutical industries. © 2023 Society of Chemical Industry.

Analytics and applications of polyglycerol polyricinoleate (PGPR)-Current research progress

Polyglycerol polyricinoleate (PGPR) is a synthetic food additive containing a complex mixture of various esters. In recent years, there has been a growing trend to use PGPR-stabilized water-in-oil (W/O) emulsions to replace fat in order to produce low-calorie food products. In this respect, it is essential to comprehensively characterize the PGPR molecular species composition, which might enable to reduce its required amount in emulsions and foods based on a better understanding of the structure-activity relationship. This review presents the recent research progress on the characterization and quantitative analysis of PGPR. The influencing factors of the emulsifying ability of PGPR in W/O emulsions are further illustrated to provide new insights on the total or partial replacement of PGPR. Moreover, the latest progress on applications of PGPR in food products is described. Current studies have revealed the complex structure of PGPR. Besides, recent research has focused on the quantitative determination of the composition of PGPR and the quantification of the PGPR concentration in foods. However, research on the quantitative determination of the (poly)glycerol composition of PGPR and of the individual molecular species present in PGPR is still limited. Some natural water- or oil-soluble surfactants (e.g., proteins or lecithin) have been proven to enable the partial replacement of PGPR in W/O emulsions. Additionally, water-dispersible phytosterol particles and lecithin have been successfully used as a substitute of PGPR to create stable W/O emulsions.

Binding of ankaflavin with bovine serum albumin (BSA) in the presence of carrageenan and protective effects of Monascus yellow pigments against oxidative damage to BSA after forming a complex with carrageenan

Ankaflavin (AK) is a typical yellow pigment extracted from Monascus-fermented rice with several biological effects; however, its solubility is poor. Thus, research studies of the delivery systems of AK, especially those constructed from protein-polysaccharide complexes, have attracted considerable attention. However, the interactions that exist in the system have rarely been investigated. This work focused on the interactions between AK and bovine serum albumin (BSA) as well as the influence of carrageenan (Car) on the binding of AK to BSA. Results revealed that the quenching of BSA by AK involved the static quenching mechanism. The formed BSA-AK complexes were mainly maintained by hydrophobic forces and AK was located within the hydrophobic cavity of BSA. Compared to free AK or AK only complexed with BSA, a higher absorption intensity of AK was observed for the formed BSA-AK-Car complexes, indicating changes in the microenvironment of AK. This was confirmed by the increase in the α-helix content of BSA after the formation of BSA-AK-Car complexes. Hydrogen bond, van der Waals, and electrostatic interactions were verified to be the primary forces preserving the BSA-AK-Car complexes. Moreover, the antioxidant potential of Monascus-fermented products rich in AK (denoted as Mps), namely BSA-Mps and BSA-Mps-Car was evaluated. The antioxidant activity of Mps was negatively impacted by BSA, while the addition of Car could enhance the antioxidant capacity of BSA-Mps-Car complexes. Meanwhile, Mps showed a protective effect against free radical-induced oxidation damage to BSA, and Car could further improve this effect.

Monascus Red Pigment Liposomes: Microstructural Characteristics, Stability, and Anticancer Activity

Monascus red pigments (MRPs), which are a kind of natural colorant produced by Monascus spp., are widely used in the food and health supplements industry but are not very stable during processing and storage. Thus, MRPs were embedded into liposome membranes using a thin-film ultrasonic method to improve stability in this study. Monascus red pigments liposomes (MRPL) exhibited spherical unilamellar vesicles (UV) with particle size, polydispersity indexes (PDI), and zeta potential of 20-200 nm, 0.362 ± 0.023, and -42.37 ± 0.21 mV, respectively. pH, thermal, light, metal ion, storage, and in vitro simulated gastrointestinal digestion stability revealed that, compared with free MRPs, liposomes embedding significantly enhanced the stability of MRPs when exposed to adverse environmental conditions. Furthermore, anticancer assay suggested that MRPL exhibited a stronger inhibitory effect on MKN-28 cells by damaging the integrity of cells, with the IC₅₀ value at 0.57 mg/mL. Overall, MRPLs possess stronger stability in external environment and in vitro simulated digestion with greater anticancer activity, indicating that MRPLs have the potential for promising application in the functional foods and pharmaceutical industries.

Pickering Emulsions Stabilized by Tea Water-Insoluble Protein Nanoparticles From Tea Residues: Responsiveness to Ionic Strength

Tea water-insoluble protein nanoparticles (TWIPNs) can be applied to stabilize Pickering emulsions. However, the effect of ionic strength (0–400 mmol/L) on the characteristics of Pickering emulsions stabilized by TWIPNs (TWIPNPEs) including volume-averaged particle size (d_4,3), zeta potential, microstructure and rheological properties is still unclear. Therefore, this work researched the effect of ionic strength on the characteristics of TWIPNPEs. The d_4,3 of TWIPNPEs in the aquatic phase increased with the increase in ionic strength (0–400 mmol/L), which was higher than that in the SDS phase. Furthermore, the flocculation index of TWIPNPEs significantly (P < 0.05) increased from 24.48 to 152.92% with the increase in ionic strength. This could be verified from the microstructure observation. These results indicated that ionic strength could promote the flocculation of TWIPNPEs. Besides, the absolute values of zeta potential under different ionic strengths were above 40 mV in favor of the stabilization of TWIPNPEs. The viscosity of TWIPNPEs as a pseudoplastic fluid became thin when shear rate increased from 0.1 to 100 s⁻¹. The viscoelasticity of TWIPNPEs increased with increasing ionic strength to make TWIPNPEs form a gel-like Pickering emulsion. the possible mechanism of flocculation stability of TWIPNPEs under different ionic strengths was propose. TWIPNs adsorbed to the oil-water interface would prompt flocculation between different emulsion droplets under the high ionic strength to form gel-like behavior verified by CLSM. These results on the characteristics of TWIPNPEs in a wide ionic strength range would provide the theoretical basis for applying Pickering emulsions stabilized by plant proteins in the food industry.

Effects of M/G Ratios of Sodium Alginate on Physicochemical Stability and Calcium Release Behavior of Pickering Emulsion Stabilized by Calcium Carbonate

The gel properties of sodium alginate (SA) have been revealed to be strongly correlated with its ratio of D-mannuronate to L-guluronate (M/G ratio). Herein, we focused on SA with different M/G ratios to conduct an in-depth study on the effect of the M/G ratio difference on physicochemical stability and calcium release behavior of the Pickering emulsion stabilized by calcium carbonate (CaCO₃). The oil phase was added to the aqueous phase, prepared by SA with different M/G ratios (2.23, 0.89, and 0.56) and CaCO₃, for one-step shearing to obtain the E1, E2, and E3 emulsions, respectively. The results of the particle size, microstructure, long-term stability, rheological, and microrheological properties of the emulsions showed that the E3 emulsion, prepared by SA with a smaller M/G ratio, had a smaller particle size and has remained in a flow condition during the long-term storage, while the E1 and E2 emulsions had a gelation behavior and a stronger viscoelasticity. Moreover, the emulsion, as a liquid calcium supplement, is not only convenient for oral intake while meeting the calcium needs of the body, but also controls the release of Ca²⁺. The calcium release of the emulsions in a simulated gastric environment demonstrated that the calcium release ratio increased with the decrease of SA concentration, with the increase of M/G ratio, and with the decrease of oil phase volume.

Polyphenol Loaded W1/O/W2 Emulsions Stabilized with Lesser Mealworm (Alphitobius diaperinus) Protein Concentrate Produced by Membrane Emulsification: Stability under Simulated Storage, Process, and Digestion Conditions

Water-in-oil-in-water (W1/O/W2) emulsions are complex delivery systems for polyphenols amongst other bio-actives. To stabilize the oil-water interphase, dairy proteins are commonly employed, which are ideally replaced by other, more sustainable sources, such as insect proteins. In this study, lesser mealworm (Alphitobius diaperinus) protein concentrate (LMPC) is assessed and compared to whey protein (WPI) and pea protein (PPI), to stabilize W1/O/W2 emulsions and encapsulate a commercial polyphenol. The results show that LMPC is able to stabilize W1/O/W2 emulsions comparably to whey protein and pea protein when using a low-energy membrane emulsification system. The final droplet size (d4,3) is 7.4 μm and encapsulation efficiency is between 72 and 74%, regardless of the protein used. Under acidic conditions, the LMPC shows a similar performance to whey protein and outperforms pea protein. Under alkaline conditions, the three proteins perform similarly, while the LMPC-stabilized emulsions are less able to withstand osmotic pressure differences. The LMPC stabilized emulsions are also more prone to droplet coalescence after a freeze-thaw cycle than the WPI-stabilized ones, but they are the most stable when exposed to the highest temperatures tested (90 °C). The results show LMPC's ability to stabilize multiple emulsions and encapsulate a polyphenol, which opens the door for application in foods.