Association Between Aneurysmal Haemodynamics and Device Microstructural Characteristics After Flow-Diversion Treatments With Dual Stents of Different Sizes: A Numerical Study

Quantitative analysis of hemodynamic changes induced by the discrepancy between the sizes of the flow diverter and parent artery

The efficacy of flow diverters is influenced by the strut configuration changes resulting from size discrepancies between the stent and the parent artery. This study aimed to quantitatively analyze the impact of size discrepancies between flow diverters and parent arteries on the flow diversion effects, using computational fluid dynamics. Four silicone models with varying parent artery sizes were developed. Real flow diverters were deployed in these models to assess stent configurations at the aneurysm neck. Virtual stents were generated based on these configurations for computational fluid dynamics analysis. The changes in the reduction rate of the hemodynamic parameters were quantified to evaluate the flow diversion effect. Implanting 4.0 mm flow diverters in aneurysm models with parent artery diameters of 3.0-4.5 mm, in 0.5 mm increments, revealed that a shift from oversized to undersized flow diverters led to an increase in the reduction rates of hemodynamic parameter, accompanied by enhanced metal coverage rate and pore density. However, the flow diversion effect observed transitioning from oversizing to matching was less pronounced when moving from matching to undersizing. This emphasizes the importance of proper sizing of flow diverters, considering the benefits of undersizing and not to exceed the threshold of advantages.

Experimental Study of Collateral Patency following Overlapped Multilayer Flow Modulators Deployment

Decades after its introduction, endovascular aneurysm repair remains a challenging procedure with risks of collateral patency failure. Here, we investigate the ability of a porous stent, the Multilayer Flow Modulator (MFM), to maintain renal perfusion after a single or overlapping case. Silicone models representing an ideal infrarenal AAA geometry were used to analyze and compare three cases (control, single MFM and two overlapped MFMs). Micro-computed tomography was used to image the deployed MFM devices geometry and evaluate pore size and density along with porosity in both two (planimetric) and three dimensions (gravimetric). Laser particle image velocimetry (PIV) experiments were performed to image velocity and vorticity fields at the aorta-renal bifurcation. Flow experiments revealed renal arteries perfusion preservation in both single and overlapped cases. Microstructure analysis revealed an uneven distribution of wires in the MFM devices leading to local change in planimetric porosity and pore size. Overlap of a second MFM device led to a significant decrease in those 2D metrics but did not affect the gravimetric porosity and the branch perfusion. This first microstructure evaluation of MFM device combined with flow experiments revealed the ability of the device to preserve collateral flow thanks to a highly porous microstructure.