Closing the Yield Gap for Cannabis: A Meta-Analysis of Factors Determining Cannabis Yield

Evaluating the impact of light quality on plant-herbivore interactions using hemp as the model system

Light-emitting diodes (LED) offer energy-efficient and customizable light sources that can be tailored to optimize plant chemistry and growth characteristics. Indoor cannabis production is the most energy-intensive crop in the United States and suffers from insect pest infestations including the cannabis aphid, Phorodon cannabis Passerini, which can negatively impact yield. Here we investigated the potential of light quality (color) to manage Cannabis sativa plant chemistry and cannabis aphids to increase crop quality. Cannabis was grown indoors under LED lighting systems where we manipulated the color spectrum. Within each light treatment, a subset of plants was exposed to aphid herbivory. Physical and chemical plant responses and aphid biology were measured. The interaction between light quality and herbivory drove the time to the first flower (cola) in our experimental plants. Light quality did not impact THC/CBD, but plants under increased blue light had higher bud yield than those grown under white light. The red-blue light treatment resulted in the tallest plants with the lowest leaf-stem dry mass and bud yield. Herbivory decreased bud yield and lowered the concentration of CBD/THC in buds. Lastly, light quality impacted the reproduction and mortality of the cannabis aphid. This study demonstrates the capacity of light quality to impact plant growth traits but offers no evidence for light quality impacting CBD/THC production in Cannabis. More importantly, herbivory resulting from aphid feeding was shown to decrease CBD and THC. Light quality impacted pest biology, supporting the potential use of light quality as a pest management tool.

Morphological Characterization of Cannabis sativa L. Throughout Its Complete Life Cycle

This study extensively characterizes the morphological characteristics, including the leaf morphology, plant structure, flower development, and trichome features throughout the entire life cycle of Cannabis sativa L. cv. White Widow. The developmental responses to photoperiodic variations were investigated from germination to mature plant senescence. The leaf morphology showed a progression of complexity, beginning with serrations in the 1st true leaves, until the emergence of nine leaflets in the 6th true leaves, followed by a distinct shift to eight, then seven leaflets with the 14th and 15th true leaves, respectively. Thereafter, the leaf complexity decreased, culminating in the emergence of a single leaflet from the 25th node. The leaf area peaked with the 12th leaves, which coincided with a change from opposite to alternate phyllotaxy. The stipule development at nodes 5 and 6 signified the vegetative phase, followed by bract and solitary flower development emerging in nodes 7-12, signifying the reproductive phase. The subsequent induction of short-day photoperiod triggered the formation of apical inflorescence. Mature flowers displayed abundant glandular trichomes on perigonal bracts, with stigma color changing from whitish-yellow to reddish-brown. A pronounced increase in trichome density was evident, particularly on the abaxial bract surface, following the onset of flowering. The trichomes exhibited simultaneous growth in stalk length and glandular head diameter and pronounced shifts in color. Hermaphroditism occurred well after the general harvest date. This comprehensive study documents the intricate photoperiod-driven morphological changes throughout the complete lifecycle of Cannabis sativa L. cv. White Widow. The developmental responses characterized provide valuable insights for industrial and research applications.

Cannabis Hunger Games: nutrient stress induction in flowering stage - impact of organic and mineral fertilizer levels on biomass, cannabidiol (CBD) yield and nutrient use efficiency

Indoor medicinal cannabis cultivation systems enable year-round cultivation and better control of growing factors, however, such systems are energy and resource intensive. Nutrient deprivation during flowering can trigger nutrient translocation and modulate the production of cannabinoids, which might increase agronomic nutrient use efficiency, and thus, a more sustainable use of fertilizers. This experiment compares two fertilizer types (mineral and organic) applied in three dilutions (80, 160 and 240 mg N L-1) to evaluate the effect of nutrient deprivation during flowering on biomass, Cannabidiol (CBD) yield and nutrient use efficiency of N, P and K. This is the first study showing the potential to reduce fertilizer input while maintaining CBD yield of medicinal cannabis. Under nutrient stress, inflorescence yield was significantly lower at the final harvest, however, this was compensated by a higher CBD concentration, resulting in 95% of CBD yield using one-third less fertilizer. The higher nutrient use efficiency of N, P, and K in nutrient-deprived plants was achieved by a larger mobilization and translocation of nutrients increasing the utilization efficiency of acquired nutrients. The agronomic nutrient use efficiency of CBD yield - for N and K - increased 34% for the organic fertilizers and 72% for the mineral fertilizers comparing the dilution with one-third less nutrients (160) with the highest nutrient concentration (240). Differences in CBD yield between fertilizer types occurred only at the final harvest indicating limitations in nutrient uptake due to nutrient forms in the organic fertilizer. Our results showed a lower acquisition and utilization efficiency for the organic fertilizer, proposing the necessity to improve either the timing of bio-availability of organic fertilizers or the use of soil amendments.

Enhanced production of select phytocannabinoids in medical Cannabis cultivars using microbial consortia

The root microbiome of medical cannabis plants has been largely unexplored due to past legal restrictions in many countries. Microbes that live on and within the tissue of Cannabis sativa L. similar to other plants, provide advantages such as stimulating plant growth, helping it absorb minerals, providing protection against pathogen attacks, and influencing the production of secondary metabolites. To gain insight into the microbial communities of C. sativa cultivars with different tetrahydrocannabinol (THC) and cannabidiol (CBD) profiles, a greenhouse trial was carried out with and without inoculants added to the growth substrate. Illumina MiSeq metabarcoding was used to analyze the root and rhizosphere microbiomes of the five cultivars. Plant biomass production showed higher levels in three of five cultivars inoculated with the arbuscular mycorrhizal fungus Rhizophagus irregularis and microbial suspension. The blossom dry weight of the cultivar THE was greater when inoculated with R. irregularis and microbial suspension than with no inoculation. Increasing plant biomass and blossom dry weight are two important parameters for producing cannabis for medical applications. In mature Cannabis, 12 phytocannabinoid compounds varied among cultivars and were affected by inoculants. Significant differences (p ≤ 0.01) in concentrations of cannabidivarinic acid (CBDVA), cannabidivarin (CBDV), cannabigerol (CBG), cannabidiol (CBD), and cannabigerolic acid (CBGA) were observed in all Cannabis cultivars when amended with F, K1, and K2 inoculants. We found microbes that were shared among cultivars. For example, Terrimicrobium sp., Actinoplanes sp., and Trichoderma reesei were shared by the cultivars ECC-EUS-THE, CCL-ECC, and EUS-THE, respectively. Actinoplanes sp. is a known species that produces phosphatase enzymes, while Trichoderma reesei is a fungal train that produces cellulase and contributes to organic matter mineralization. However, the role of Terrimicrobium sp. as an anaerobic bacterium remains unknown. This study demonstrated that the use of inoculants had an impact on the production of phytocannabinoids in five Cannabis cultivars. These inoculants could have useful applications for optimizing cannabis cultivation practices and increasing the production of phytocannabinoids.

Comparative genomics of flowering behavior in Cannabis sativa

Cannabis sativa L. is a phenotypically diverse and multi-use plant used in the production of fiber, seed, oils, and a class of specialized metabolites known as phytocannabinoids. The last decade has seen a rapid increase in the licit cultivation and processing of C. sativa for medical end-use. Medical morphotypes produce highly branched compact inflorescences which support a high density of glandular trichomes, specialized epidermal hair-like structures that are the site of phytocannabinoid biosynthesis and accumulation. While there is a focus on the regulation of phytocannabinoid pathways, the genetic determinants that govern flowering time and inflorescence structure in C. sativa are less well-defined but equally important. Understanding the molecular mechanisms that underly flowering behavior is key to maximizing phytocannabinoid production. The genetic basis of flowering regulation in C. sativa has been examined using genome-wide association studies, quantitative trait loci mapping and selection analysis, although the lack of a consistent reference genome has confounded attempts to directly compare candidate loci. Here we review the existing knowledge of flowering time control in C. sativa, and, using a common reference genome, we generate an integrated map. The co-location of known and putative flowering time loci within this resource will be essential to improve the understanding of C. sativa phenology.

Molecular Mechanisms Underlying Potential Pathogen Resistance in Cannabis sativa

Cannabis (Cannabis sativa L.) is one of the earliest cultivated crops, valued for producing a broad spectrum of compounds used in medicinal products and being a source of food and fibre. Despite the availability of its genome sequences, few studies explore the molecular mechanisms involved in pathogen defense, and the underlying biological pathways are poorly defined in places. Here, we provide an overview of Cannabis defence responses against common pathogens, such as Golovinomyces spp., Fusarium spp., Botrytis cinerea and Pythium spp. For each of these pathogens, after a summary of their characteristics and symptoms, we explore studies identifying genes involved in Cannabis resistance mechanisms. Many studies focus on the potential involvement of disease-resistance genes, while others refer to other plants however whose results may be of use for Cannabis research. Omics investigations allowing the identification of candidate defence genes are highlighted, and genome editing approaches to generate resistant Cannabis species based on CRISPR/Cas9 technology are discussed. According to the emerging results, a potential defence model including both immune and defence mechanisms in Cannabis plant-pathogen interactions is finally proposed. To our knowledge, this is the first review of the molecular mechanisms underlying pathogen resistance in Cannabis.

Sub-optimal nutrient regime coupled with Bacillus and Pseudomonas sp. inoculation influences trichome density and cannabinoid profiles in drug-type Cannabis sativa

Cannabis sativa remains under heavy legal restriction around the globe that prevents extensive investigations into agricultural applications for improving its development. This work investigates the potential of specific plant growth-promoting rhizobacteria (PGPR) to improve Cannabis cannabinoid yield through increased trichome densities on floral organs, and to determine if sub-optimal environmental conditions would affect the outcomes of PGPR presence by altering plant development and cannabinoid profiles. Here, Pseudomonas sp. or Bacillus sp. were applied to the root system either separately or in a consortium to determine the effect of this bacterial treatment on the density of stalked glandular trichomes. Further, a low nutrient regime was applied for the first half of plant development to determine if an environmental stressor interacts with the effects of the microbial treatments on stalked trichome densities. Following 8 weeks of flower development, trichome density on calyces and bracts of inflorescences were determined using microscopy. Our findings unexpectedly indicate that recommended nutrient levels were linked to a decreasing trend in trichome densities with PGPR inoculations, but a low nutrient regime coupled with PGPR treatment increased them. Cannabinoid content is partially consistent with these results, in that a low nutrient regime increased the abundance of key cannabinoids compared to recommended regimes, with Bacillus sp. inoculation linked to the greatest number of significant changes between the two nutrient regimes. Overall, this work provides insight into how PGPR presence affects Cannabis stalked trichome development and cannabinoid profiles, and how environmental stressors can affect, and even enhance, trichome densities and influence major cannabinoid production, thereby pointing towards avenues for reducing the reliance on synthetic fertilizers during plant production without compromising yield.

Plant Growth-Promoting Rhizobacteria (PGPR) with Microbial Growth Broth Improve Biomass and Secondary Metabolite Accumulation of Cannabis sativa L

Plant growth-promoting rhizobacteria (PGPR) are a sustainable crop production input; some show positive effects under laboratory conditions but poorly colonize host field-grown plants. Inoculating with PGPR in microbial growth medium (e.g., King's B) could overcome this. We evaluated cannabis plant (cv. CBD Kush) growth promotion by inoculating three PGPR (Bacillus sp., Mucilaginibacter sp., and Pseudomonas sp.) in King's B at vegetative and flower stages. At the vegetative stage, Mucilaginibacter sp. inoculation increased flower dry weight (24%), total CBD (11.1%), and THC (11.6%); Pseudomonas sp. increased stem (28%) dry matter, total CBD (7.2%), and THC (5.9%); and Bacillus sp. increased total THC by 4.8%. Inoculation with Mucilaginibacter sp. and Pseudomonas sp. at the flowering stage led to 23 and 18% increases in total terpene accumulation, respectively. Overall, vegetative inoculation with PGPR enhanced cannabis yield attributes and chemical profiles. Further research into PGPR inoculation onto cannabis and the subsequent level of colonization could provide key insights regarding PGPR-host interactions.

Controlled environments for cannabis cultivation to support "omics" research studies and production

The cannabis (Cannabis sativa L.) genome is highly heterozygous and, to retain genetic identity, clonal propagation of cultivars is very common. Establishing controlled environments, often involving multiple locations throughout a single grow, is critical for reliably generating materials to be used in research and production. In this article, we break down different periods of the grow cycle, such as cloning, hardening (optional), vegetative growth, flowering growth, and harvest, into individual steps. We are including images and videos for an in-depth coverage of methodological details. We are providing a list of equipment, supplies, reagents, and other resources to help with planning a grow experiment. Finally, we are discussing considerations for different aspects of controlled environments, including lighting, fertilizer regimes, and integrated pest management. With this article, it is our goal to empower researchers to reliably generate disease-free cannabis material suitable for genetic and biochemical studies that require full control of environmental factors.

Foliar Symptomology, Nutrient Content, Yield, and Secondary Metabolite Variability of Cannabis Grown Hydroponically with Different Single-Element Nutrient Deficiencies

In controlled environment production systems, Cannabis sativa (hereafter cannabis) is a commodity with high nutrient demands due to prolific growth under optimized environmental conditions. Since nutrient deficiencies can reduce yield and quality, cultivators need tools to rapidly detect and evaluate deficiency symptoms so corrective actions can be taken quickly to minimize losses. We grew cannabis plants in solution culture with different individual nutrient elements withheld from the solutions to identify deficiency symptoms. Control plants received a complete nutrient recipe, whereas the following single elements were withheld from the respective nutrient deficiency treatments: N, P, K, Ca, Mg, S, Fe, and Mn. The nutrient treatments began when the photoperiod was switched to a 12/12 h (light/dark), and plants were grown to commercial maturity. Plants were monitored daily, and the development of visual deficiency symptoms were recorded. Photographs of each plant were taken weekly. Upon the onset of visual deficiency symptoms, both upper- and lower-canopy foliage were analyzed for nutrient element concentrations. At harvest, plants were evaluated for biomass partitioning, and the cannabinoid composition of inflorescence tissues. This manuscript describes the onset and progression of nutrient deficiency symptoms (with pictures), relates symptomology to foliar nutrient analyses, and contextualizes the relationships between nutrient deficiencies and cannabis growth, yield, and quality. Aboveground vegetative fresh weights were reduced by 73% in the -N treatment and 59% in the -P treatment, compared with the control. All deficiency treatments except for -Fe and -Mn had floral yields reduced by between 33% to 72%, compared with the control. Overall, deficiencies of individual nutrients can substantially reduce vegetative growth and inflorescence yield, although only minor effects were observed in secondary metabolite composition. The onset of individual deficiency symptoms did not always correspond with elemental analysis of foliar tissues. Cultivators should take an integrated approach in diagnosing nutrient deficiencies and take timely corrective actions to optimize productivity and minimize losses to yield and quality.

Genetic Variants Associated with Long-Terminal Repeats Can Diagnostically Classify Cannabis Varieties

Cannabis sativa (Cannabis) has recently been legalized in multiple countries globally for either its recreational or medicinal use. This, in turn, has led to a marked increase in the number of Cannabis varieties available for use in either market. However, little information currently exists on the genetic distinction between adopted varieties. Such fundamental knowledge is of considerable value and underpins the accelerated development of both a nascent pharmaceutical industry and the commercial recreational market. Therefore, in this study, we sought to assess genetic diversity across 10 Cannabis varieties by undertaking a reduced representation shotgun sequencing approach on 83 individual plants to identify variations which could be used to resolve the genetic structure of the assessed population. Such an approach also allowed for the identification of the genetic features putatively associated with the production of secondary metabolites in Cannabis. Initial analysis identified 3608 variants across the assessed population with phylogenetic analysis of this data subsequently enabling the confident grouping of each variety into distinct subpopulations. Within our dataset, the most diagnostically informative single nucleotide polymorphisms (SNPs) were determined to be associated with the long-terminal repeat (LTRs) class of retroelements, with 172 such SNPs used to fully resolve the genetic structure of the assessed population. These 172 SNPs could be used to design a targeted resequencing panel, which we propose could be used to rapidly screen different Cannabis plants to determine genetic relationships, as well as to provide a more robust, scientific classification of Cannabis varieties as the field moves into the pharmaceutical sphere.

Too Dense or Not Too Dense: Higher Planting Density Reduces Cannabinoid Uniformity but Increases Yield/Area in Drug-Type Medical Cannabis

A major challenge for utilizing cannabis for modern medicine is the spatial variability of cannabinoids in the plant, which entail differences in medical potency. Since secondary metabolism is affected by environmental conditions, a key trigger for the variability in secondary metabolites throughout the plant is variation in local micro-climates. We have, therefore, hypothesized that plant density, which is well-known to alter micro-climate in the canopy, affects spatial standardization, and concentrations of cannabinoids in cannabis plants. Canopy density is affected by shoot architecture and by plant spacing, and we have therefore evaluated the interplay between plant architecture and plant density on the standardization of the cannabinoid profile in the plant. Four plant architecture modulation treatments were employed on a drug-type medicinal cannabis cultivar, under a density of 1 or 2 plants/m². The plants were cultivated in a naturally lit greenhouse with photoperiodic light supplementation. Analysis of cannabinoid concentrations at five locations throughout the plant was used to evaluate treatment effects on chemical uniformity. The results revealed an effect of plant density on cannabinoid standardization, as well as an interaction between plant density and plant architecture on the standardization of cannabinoids, thus supporting the hypothesis. Increasing planting density from 1 to 2 plants/m² reduced inflorescence yield/plant, but increased yield quantity per area by 28-44% in most plant architecture treatments. The chemical response to plant density and architecture modulation was cannabinoid-specific. Concentrations of cannabinoids in axillary inflorescences from the bottom of the plants were up to 90% lower than in the apical inflorescence at the top of the plant, considerably reducing plant uniformity. Concentrations of all detected cannabinoids in these inflorescences were lower at the higher density plants; however, cannabinoid yield per cultivation area was not affected by neither architecture nor density treatments. Cannabigerolic acid (CBGA) was the cannabinoid least affected by spatial location in the plant. The morpho-physiological response of the plants to high density involved enhanced leaf drying at the bottom of the plants, increased plant elongation, and reduced cannabinoid concentrations, suggesting an involvement of chronic light deprivation at the bottom of the plants. Therefore, most importantly, under high density growth, architectural modulating treatments that facilitate increased light penetration to the bottom of the plant such as "Defoliation", or that eliminated inflorescences development at the bottom of the plant such as removal of branches from the lower parts of the plant, increased chemical standardization. This study revealed the importance of plant density and architecture for chemical quality and standardization in drug-type medical cannabis.

Indoor grown cannabis yield increased proportionally with light intensity, but ultraviolet radiation did not affect yield or cannabinoid content

Cannabis (Cannabis sativa) flourishes under high light intensities (LI); making it an expensive commodity to grow in controlled environments, despite its high market value. It is commonly believed that cannabis secondary metabolite levels may be enhanced both by increasing LI and exposure to ultraviolet radiation (UV). However, the sparse scientific evidence is insufficient to guide cultivators for optimizing their lighting protocols. We explored the effects of LI and UV exposure on yield and secondary metabolite composition of a high Δ⁹-tetrahydrocannabinol (THC) cannabis cultivar 'Meridian'. Plants were grown under short day conditions for 45 days under average canopy photosynthetic photon flux densities (PPFD, 400-700 nm) of 600, 800, and 1,000 μmol m^-2 s^-1, provided by light emitting diodes (LEDs). Plants exposed to UV had PPFD of 600 μmol m^-2 s^-1 plus either (1) UVA; 50 μmol m^-2 s^-1 of UVA (315-400 nm) from 385 nm peak LEDs from 06:30 to 18:30 HR for 45 days or (2) UVA + UVB; a photon flux ratio of ≈1:1 of UVA and UVB (280-315 nm) from a fluorescent source at a photon flux density of 3.0 μmol m^-2 s^-1, provided daily from 13:30 to 18:30 HR during the last 20 days of the trial. All aboveground biomass metrics were 1.3-1.5 times higher in the highest vs. lowest PPFD treatments, except inflorescence dry weight - the most economically relevant parameter - which was 1.6 times higher. Plants in the highest vs. lowest PPFD treatment also allocated relatively more biomass to inflorescence tissues with a 7% higher harvest index. There were no UV treatment effects on aboveground biomass metrics. There were also no intensity or UV treatment effects on inflorescence cannabinoid concentrations. Sugar leaves (i.e., small leaves associated with inflorescences) of plants in the UVA + UVB treatment had ≈30% higher THC concentrations; however, UV did not have any effect on the total THC in thesefoliar tissues. Overall, high PPFD levels can substantially increase cannabis yield, but we found no commercially relevant benefits of adding UV to indoor cannabis production.

Genome-Wide Identification and Expression Analysis of Homeodomain Leucine Zipper Subfamily IV (HD-ZIP IV) Gene Family in Cannabis sativa L

The plant-specific homeodomain zipper family (HD-ZIP) of transcription factors plays central roles in regulating plant development and environmental resistance. HD-ZIP transcription factors IV (HDZ IV) have been involved primarily in the regulation of epidermal structure development, such as stomata and trichomes. In our study, we identified nine HDZ IV-encoding genes in Cannabis sativa L. by conducting a computational analysis of cannabis genome resources. Our analysis suggests that these genes putatively encode proteins that have all the conserved domains of HDZ IV transcription factors. The phylogenetic analysis of HDZ IV gene family members of cannabis, rice (Oryza sativa), and Arabidopsis further implies that they might have followed distinct evolutionary paths after divergence from a common ancestor. All the identified cannabis HDZ IV gene promoter sequences have multiple regulation motifs, such as light- and hormone-responsive elements. Furthermore, experimental evidence shows that different HDZ IV genes have different expression patterns in root, stem, leaf, and flower tissues. Four genes were primarily expressed in flowers, and the expression of CsHDG5 (XP_030501222.1) was also correlated with flower maturity. Fifty-nine genes were predicted as targets of HDZ IV transcription factors. Some of these genes play central roles in pathogen response, flower development, and brassinosteroid signaling. A subcellular localization assay indicated that one gene of this family is localized in the Arabidopsis protoplast nucleus. Taken together, our work lays fundamental groundwork to illuminate the function of cannabis HDZ IV genes and their possible future uses in increasing cannabis trichome morphogenesis and secondary metabolite production.

Biocontrol Activity of Bacillus spp. and Pseudomonas spp. Against Botrytis cinerea and Other Cannabis Fungal Pathogens

Gray mold caused by Botrytis cinerea is one of the most widespread and damaging diseases in cannabis crops worldwide. With challenging restrictions on pesticide use and few effective control measures, biocontrol agents are needed to manage this disease. The aim of this study was to identify bacterial biocontrol agents with wide-spectrum activity against B. cinerea and other cannabis fungal pathogens. Twelve Bacillus and Pseudomonas strains were first screened with in vitro confrontational assays against 10 culturable cannabis pathogens, namely B. cinerea, Sclerotinia sclerotiorum, Fusarium culmorum, F. sporotrichoides, F. oxysporum, Nigrospora sphaerica, N. oryzae, Alternaria alternata, Phoma sp., and Cercospora sp. Six strains displaying the highest inhibitory activity, namely Bacillus velezensis LBUM279, FZB42, LBUM1082, Bacillus subtilis LBUM979, P. synxantha LBUM223, and P. protegens Pf-5, were further assessed in planta where all, except LBUM223, significantly controlled gray mold development on cannabis leaves. Notably, LBUM279 and FZB42 reduced disease severity by at least half compared with water-treated plants and prevented lesion development and/or sporulation up to 9 days after pathogen inoculation. Genomes of LBUM279, LBUM1082, and LBUM979 were sequenced de novo and taxonomic affiliations were determined to ensure nonrelatedness with pathogenic strains. Moreover, the genomes were exempt of detrimental genes encoding major toxins and virulence factors that could otherwise pose a biosafety risk when used on crops. Eighteen gene clusters of potential biocontrol interest were also identified. To our knowledge, this is the first reported attempt to control cannabis fungal diseases in planta by direct antagonism with beneficial bacteria.

Exploiting Beneficial Pseudomonas spp. for Cannabis Production

Among the oldest domesticated crops, cannabis plants (Cannabis sativa L., marijuana and hemp) have been used to produce food, fiber, and drugs for thousands of years. With the ongoing legalization of cannabis in several jurisdictions worldwide, a new high-value market is emerging for the supply of marijuana and hemp products. This creates unprecedented challenges to achieve better yields and environmental sustainability, while lowering production costs. In this review, we discuss the opportunities and challenges pertaining to the use of beneficial Pseudomonas spp. bacteria as crop inoculants to improve productivity. The prevalence and diversity of naturally occurring Pseudomonas strains within the cannabis microbiome is overviewed, followed by their potential mechanisms involved in plant growth promotion and tolerance to abiotic and biotic stresses. Emphasis is placed on specific aspects relevant for hemp and marijuana crops in various production systems. Finally, factors likely to influence inoculant efficacy are provided, along with strategies to identify promising strains, overcome commercialization bottlenecks, and design adapted formulations. This work aims at supporting the development of the cannabis industry in a sustainable way, by exploiting the many beneficial attributes of Pseudomonas spp.

Optimizing Photoperiod Switch to Maximize Floral Biomass and Cannabinoid Yield in Cannabis sativa L.: A Meta-Analytic Quantile Regression Approach

Cannabis sativa L. is an annual, short-day plant, such that long-day lighting promotes vegetative growth while short-day lighting induces flowering. To date, there has been no substantial investigation on how the switch between these photoperiods influences yield of C. sativa despite the tight correlation that plant size and floral biomass have with the timing of photoperiod switches in indoor growing facilities worldwide. Moreover, there are only casual predictions around how the timing of the photoperiodic switch may affect the production of secondary metabolites, like cannabinoids. Here we use a meta-analytic approach to determine when growers should switch photoperiods to optimize C. sativa floral biomass and cannabinoid content. To this end, we searched through ISI Web of Science for peer-reviewed publications of C. sativa that reported experimental photoperiod durations and results containing cannabinoid concentrations and/or floral biomass, then from 26 studies, we estimated the relationship between photoperiod and yield using quantile regression. Floral biomass was maximized when the long daylength photoperiod was minimized (i.e., 14 days), while THC and CBD potency was maximized under long day length photoperiod for ~42 and 49-50 days, respectively. Our work reveals a yield trade-off in C. sativa between cannabinoid concentration and floral biomass where more time spent under long-day lighting maximizes cannabinoid content and less time spent under long-day lighting maximizes floral biomass. Growers should carefully consider the length of long-day lighting exposure as it can be used as a tool to maximize desired yield outcomes.

Impact of Harvest Time and Pruning Technique on Total CBD Concentration and Yield of Medicinal Cannabis

The definition of optimum harvest and pruning interventions are important factors varying inflorescence yield and cannabinoid composition. This study investigated the impact of (i) harvest time (HT) and (ii) pruning techniques (PT) on plant biomass accumulation, CBD and CBDA-concentrations and total CBD yield of a chemotype III medical cannabis genotype under indoor cultivation. The experiment consisted of four HTs between 5 and 11 weeks of flowering and three PTs-apical cut (T); removal of side shoots (L) and control (C), not pruned plants. Results showed that inflorescence dry weight increased continuously, while the total CBD concentration did not differ significantly over time. For the studied genotype, optimum harvest time defined by highest total CBD yield was found at 9 weeks of flowering. Total CBD-concentration of inflorescences in different fractions of the plant's height was significantly higher in the top (9.9%) in comparison with mid (8.2%) and low (7.7%) fractions. The T plants produced significantly higher dry weight of inflorescences and leaves than L and C. Total CBD yield of inflorescences for PTs were significantly different among pruned groups, but do not differ from the control group. However, a trend for higher yields was observed (T > C > L).

Effects of short-term environmental stresses on the onset of cannabinoid production in young immature flowers of industrial hemp (Cannabis sativa L.)

BACKGROUNDS

Cannabis sativa L. produces at least 120 cannabinoids. Although genetic variation is the main factor in cannabinoid production, the effects of short-term environmental stresses in the early flowering stage remains largely unknown.

METHODS

To investigate the effects of short-term environmental stresses on the onset of cannabinoid production in young immature flowers, a hemp variety, Green-Thunder (5-8% CBD/mg of dry weight), was treated with mechanical damage, insect herbivory, extreme heat, or drought stress for 5-7 days during the first 2 weeks of flowering. Three hemp tissues, including flowers, leaves, and stems, were collected from hemp grown under these stress conditions at multiple time points during the first 2 weeks after transition to the short photoperiod and analyzed using high pressure liquid chromatography to quantify phytocannabinoids including cannabigerolic acid (CBGA), cannabigerol (CBG), cannabidiolic acid (CBDA), cannabidiol (CBD), Δ-tetrahydrocannabinolic acid (THCA), Δ-tetrahydrocannabinol (THC), and cannabinol (CBN).

RESULTS

The 5 days of mechanical wounding did not affect the production of any of the cannabinoids during the initial stage of flowering. However, after 5 days of herbivore treatment, there was a significant difference in concentration between day 1 and day 6 of CBGA (control: 308 μg/g; treatment - 24 μg/g), CBG (control: 69 μg/g; treatment: 52 μg/g), and CBD (control: 755 μg/g; treatment: 194 μg/g) between the control and treatment plants. The 7 days of heat treatment at 45-50 oC significantly reduced the production of CBGA during this observed window (control: 206 μg/g; treatment: 182 μg/g) and CBG (control: 21 μg/g; treatment: - 112 μg/g). Notably, the largest change was observed after 7 days of drought stress, when plants showed a 40% greater accumulation of CBG (control: 336 μg/g; treatment: 622 μg/g), and a significant decrease (70-80%) in CBD (control: 1182 μg/g; treatment: 297 μg/g) and THC amounts (control: 3927 μg/g; treatment: 580 μg/g).

CONCLUSIONS

Although this observation is limited in the early flowering stage, the common field stresses are adequate to induce changes in the cannabinoid profiles, particularly drought stress being the most impactful stress for hemp flower initiation with the altering the cannabinoid production by decreasing CBD and THC accumulation while increasing CBG by 40%.

Microbiome of Field Grown Hemp Reveals Potential Microbial Interactions With Root and Rhizosphere Soil

Hemp (Cannabis sativa L.) is a crop bred and grown for the production of fiber, grain, and floral extracts that contribute to health and wellness. Hemp plants interact with a myriad of microbiota inhabiting the phyllosphere, endosphere, rhizoplane, and rhizosphere. These microbes offer many ecological services, particularly those of below ground biotopes which are involved in nutrient cycling, uptake, and alleviating biotic and abiotic stress. The microbiota communities of the hemp rhizosphere in the field are not well documented. To discover core microbiota associated with field grown hemp, we cultivated single C. sativa cultivar, “TJ’s CBD,” in six different fields in New York and sampled hemp roots and their rhizospheric soil. We used Illumina MiSeq amplicon sequencing targeting 16S ribosomal DNA of bacteria and ITS of fungi to study microbial community structure of hemp roots and rhizospheres. We found that Planctobacteria and Ascomycota dominated the taxonomic composition of hemp associated microbial community. We identified potential core microbiota in each community (bacteria: eight bacterial amplicon sequence variant – ASV, identified as Gimesia maris, Pirellula sp. Lacipirellula limnantheis, Gemmata sp. and unclassified Planctobacteria; fungi: three ASVs identified as Fusarium oxysporum, Gibellulopsis piscis, and Mortierella minutissima). We found 14 ASVs as hub taxa [eight bacterial ASVs (BASV) in the root, and four bacterial and two fungal ASVs in the rhizosphere soil], and 10 BASV connected the root and rhizosphere soil microbiota to form an extended microbial communication in hemp. The only hub taxa detected in both the root and rhizosphere soil microbiota was ASV37 (Caulifigura coniformis), a bacterial taxon. The core microbiota and Network hub taxa can be studied further for biocontrol activities and functional investigations in the formulation of hemp bioinoculants. This study documented the microbial diversity and community structure of hemp grown in six fields, which could contribute toward the development of bioinoculants for hemp that could be used in organic farming.

Three classes of hemoglobins are required for optimal vegetative and reproductive growth of Lotus japonicus: genetic and biochemical characterization of LjGlb2-1

Legumes express two major types of hemoglobins, namely symbiotic (leghemoglobins) and non-symbiotic (phytoglobins), with the latter being categorized into three classes according to phylogeny and biochemistry. Using knockout mutants, we show that all three phytoglobin classes are required for optimal vegetative and reproductive development of Lotus japonicus. The mutants of two class 1 phytoglobins showed different phenotypes: Ljglb1-1 plants were smaller and had relatively more pods, whereas Ljglb1-2 plants had no distinctive vegetative phenotype and produced relatively fewer pods. Non-nodulated plants lacking LjGlb2-1 showed delayed growth and alterations in the leaf metabolome linked to amino acid processing, fermentative and respiratory pathways, and hormonal balance. The leaves of mutant plants accumulated salicylic acid and contained relatively less methyl jasmonic acid, suggesting crosstalk between LjGlb2-1 and the signaling pathways of both hormones. Based on the expression of LjGlb2-1 in leaves, the alterations of flowering and fruiting of nodulated Ljglb2-1 plants, the developmental and biochemical phenotypes of the mutant fed on ammonium nitrate, and the heme coordination and reactivity of the protein toward nitric oxide, we conclude that LjGlb2-1 is not a leghemoglobin but an unusual class 2 phytoglobin. For comparison, we have also characterized a close relative of LjGlb2-1 in Medicago truncatula, MtLb3, and conclude that this is an atypical leghemoglobin.

Cannabis sativa: From Therapeutic Uses to Micropropagation and Beyond

The development of a protocol for the large-scale production of Cannabis and its variants with little to no somaclonal variation or disease for pharmaceutical and for other industrial use has been an emerging area of research. A limited number of protocols have been developed around the world, obtained through a detailed literature search using web-based database searches, e.g., Scopus, Web of Science (WoS) and Google Scholar. This article reviews the advances made in relation to Cannabis tissue culture and micropropagation, such as explant choice and decontamination of explants, direct and indirect organogenesis, rooting, acclimatisation and a few aspects of genetic engineering. Since Cannabis micropropagation systems are fairly new fields, combinations of plant growth regulator experiments are needed to gain insight into the development of direct and indirect organogenesis protocols that are able to undergo the acclimation stage and maintain healthy plants desirable to the Cannabis industry. A post-culture analysis of Cannabis phytochemistry after the acclimatisation stage is lacking in a majority of the reviewed studies, and for in vitro propagation protocols to be accepted by the pharmaceutical industries, phytochemical and possibly pharmacological research need to be undertaken in order to ascertain the integrity of the generated plant material. It is rather difficult to obtain industrially acceptable micropropagation regimes as recalcitrance to the regeneration of in vitro cultured plants remains a major concern and this impedes progress in the application of genetic modification technologies and gene editing tools to be used routinely for the improvement of Cannabis genotypes that are used in various industries globally. In the future, with more reliable plant tissue culture-based propagation that generates true-to-type plants that have known genetic and metabolomic integrity, the use of genetic engineering systems including "omics" technologies such as next-generation sequencing and fast-evolving gene editing tools could be implemented to speed up the identification of novel genes and mechanisms involved in the biosynthesis of Cannabis phytochemicals for large-scale production.

Acidic Cannabinoid Decarboxylation

Introduction: Cannabis is a valuable plant, cultivated by humans for millennia. However, it has only been in the past several decades that biologists have begun to clarify the interesting Cannabis biosynthesis details, especially the production of its fascinating natural products termed acidic cannabinoids. Discussion: Acidic cannabinoids can experience a common organic chemistry reaction known as decarboxylation, transforming them into structural analogues referred to as neutral cannabinoids with far different pharmacology. This review addresses acidic and neutral cannabinoid structural pairs, when and where acidic cannabinoid decarboxylation occurs, the kinetics and mechanism of the decarboxylation reaction as well as possible future directions for this topic. Conclusions: Acidic cannabinoid decarboxylation is a unique transformation that has been increasingly investigated over the past several decades. Understanding how acidic cannabinoid decarboxylation occurs naturally as well as how it can be promoted or prevented during harvesting or storage is important for the various stakeholders in Cannabis cultivation.

Impact of Three Different Light Spectra on the Yield, Morphology and Growth Trajectory of Three Different Cannabis sativa L. Strains

Cannabis is one of the oldest cultivated plants, but plant breeding and cultivation are restricted by country specific regulations. Plant growth, morphology and metabolism can be manipulated by changing light quality and intensity. Three morphologically different strains were grown under three different light spectra with three real light repetitions. Light dispersion was included into the statistical evaluation. The light spectra considered had an influence on the morphology of the plant, especially the height. Here, the shade avoidance induced by the lower R:FR ratio under the ceramic metal halide lamp (CHD) was of particular interest. The sugar leaves seemed to be of elementary importance in the last growth phase for yield composition. Furthermore, the last four weeks of flowering were crucial to influence the yield composition of Cannabis sativa L. through light spectra. The dry flower yield was significantly higher under both LED treatments compared to the conventional CHD light source. Our results indicate that the plant morphology can be artificially manipulated by the choice of light treatment to create shorter plants with more lateral branches which seem to be beneficial for yield development. Furthermore, the choice of cultivar has to be taken into account when interpreting results of light studies, as Cannabis sativa L. subspecies and thus bred strains highly differ in their phenotypic characteristics.

The Highs and Lows of P Supply in Medical Cannabis: Effects on Cannabinoids, the Ionome, and Morpho-Physiology

Environmental conditions, including the availability of mineral nutrients, affect secondary metabolism in plants. Therefore, growing conditions have significant pharmaceutical and economic importance for Cannabis sativa. Phosphorous is an essential macronutrient that affects central biosynthesis pathways. In this study, we evaluated the hypothesis that P uptake, distribution and availability in the plant affect the biosynthesis of cannabinoids. Two genotypes of medical "drug-type" cannabis plants were grown under five P concentrations of 5, 15, 30, 60, and 90 mg L-1 (ppm) in controlled environmental conditions. The results reveal several dose-dependent effects of P nutrition on the cannabinoid profile of both genotypes, as well as on the ionome and plant functional physiology, thus supporting the hypothesis: (i) P concentrations ≤15 mg L-1 were insufficient to support optimal plant function and reduced photosynthesis, transpiration, stomatal conductance and growth; (ii) 30-90 mg L-1 P was within the optimal range for plant development and function, and 30 mg L-1 P was sufficient for producing 80% of the maximum yield; (iii) Ionome: about 80% of the plant P accumulated in the unfertilized inflorescences; (iv) Cannabinoids: P supply higher than 5 mg L-1 reduced Δ9-tetrahydrocannabinolic acid (THCA) and cannabidiolic acid (CBDA) concentrations in the inflorescences by up to 25%. Cannabinoid concentrations decreased linearly with increasing yield, consistent with a yield dilution effect, but the total cannabinoid content per plant increased with increasing P supply. These results reveal contrasting trends for effects of P supply on cannabinoid concentrations that were highest under <30 mg L-1 P, vs. inflorescence biomass that was highest under 30-90 mg L-1 P. Thus, the P regime should be adjusted to reflect production goals. The results demonstrate the potential of mineral nutrition to regulate cannabinoid metabolism and optimize pharmacological quality.

Potential impacts of soil microbiota manipulation on secondary metabolites production in cannabis

BACKGROUND

Cannabis growing practices and particularly indoor cultivation conditions have a great influence on the production of cannabinoids. Plant-associated microbes may affect nutrient acquisition by the plant. However, beneficial microbes influencing cannabinoid biosynthesis remain largely unexplored and unexploited in cannabis production.

OBJECTIVE

To summarize study outcomes on bacterial and fungal communities associated with cannabis using high-throughput sequencing technologies and to uncover microbial interactions, species diversity, and microbial network connections that potentially influence secondary metabolite production in cannabis.

MATERIALS AND METHOD

A mini review was conducted including recent publications on cannabis and their associated microbiota and secondary metabolite production.

RESULTS

In this review, we provide an overview of the potential role of the soil microbiome in production of cannabinoids, and discussed that manipulation of cannabis-associated microbiome obtained through soil amendment interventions of diversified microbial communities sourced from natural forest soil could potentially help producers of cannabis to improve yields of cannabinoids and enhance the balance of cannabidiol (CBD) and tetrahydrocannabinol (THC) proportions.

CONCLUSION

Cannabis is one of the oldest cultivated crops in history, grown for food, fiber, and drugs for thousands of years. Extension of genetic variation in cannabis has developed into wide-ranging varieties with various complementary phenotypes and secondary metabolites. For medical or pharmaceutical purposes, the ratio of CBD to THC is key. Therefore, studying soil microbiota associated with cannabis and its potential impact on secondary metabolites production could be useful when selecting microorganisms as bioinoculant agents for enhanced organic cannabinoid production.

Cannabis Yield, Potency, and Leaf Photosynthesis Respond Differently to Increasing Light Levels in an Indoor Environment

Since the recent legalization of medical and recreational use of cannabis (Cannabis sativa) in many regions worldwide, there has been high demand for research to improve yield and quality. With the paucity of scientific literature on the topic, this study investigated the relationships between light intensity (LI) and photosynthesis, inflorescence yield, and inflorescence quality of cannabis grown in an indoor environment. After growing vegetatively for 2 weeks under a canopy-level photosynthetic photon flux density (PPFD) of ≈425 μmol·m-2·s-1 and an 18-h light/6-h dark photoperiod, plants were grown for 12 weeks in a 12-h light/12-h dark "flowering" photoperiod under canopy-level PPFDs ranging from 120 to 1,800 μmol·m-2·s-1 provided by light emitting diodes. Leaf light response curves varied both with localized (i.e., leaf-level) PPFD and temporally, throughout the flowering cycle. Therefore, it was concluded that the leaf light response is not a reliable predictor of whole-plant responses to LI, particularly crop yield. This may be especially evident given that dry inflorescence yield increased linearly with increasing canopy-level PPFD up to 1,800 μmol·m-2·s-1, while leaf-level photosynthesis saturated well-below 1,800 μmol·m-2·s-1. The density of the apical inflorescence and harvest index also increased linearly with increasing LI, resulting in higher-quality marketable tissues and less superfluous tissue to dispose of. There were no LI treatment effects on cannabinoid potency, while there were minor LI treatment effects on terpene potency. Commercial cannabis growers can use these light response models to determine the optimum LI for their production environment to achieve the best economic return; balancing input costs with the commercial value of their cannabis products.

Cannabis lighting: Decreasing blue photon fraction increases yield but efficacy is more important for cost effective production of cannabinoids

LED technology facilitates a range of spectral quality, which can be used to optimize photosynthesis, plant shape and secondary metabolism. We conducted three studies to investigate the effect of blue photon fraction on yield and quality of medical hemp. Conditions were varied among studies to evaluate potential interactions with environment, but all environmental conditions other than the blue photon fraction were maintained constant among the five-chambers in each study. The photosynthetic photon flux density (PPFD, 400 to 700 nm) was rigorously maintained at the set point among treatments in each study by raising the fixtures. The lowest fraction of blue photons was 4% from HPS, and increased to 9.8, 10.4, 16, and 20% from LEDs. There was a consistent, linear, 12% decrease in yield in each study as the fraction of blue photons increased from 4 to 20%. Dry flower yield ranged from 500 to 750 g m-2. This resulted in a photon conversion efficacy of 0.22 to 0.36 grams dry flower mass yield per mole of photons. Yield was higher at a PPFD of 900 than at 750 μmol m-2 s-1. There was no effect of spectral quality on CBD or THC concentration. CBD and THC were 8% and 0.3% at harvest in trials one and two, and 12% and 0.5% in trial three. The CBD/THC ratio was about 25 to 1 in all treatments and studies. The efficacy of the fixtures ranged from 1.7 (HPS) to 2.5 μmol per joule (white+red LED). Yield under the white+red LED fixture (10.4% blue) was 4.6% lower than the HPS on a per unit area basis, but was 27% higher on a per dollar of electricity basis. These findings suggest that fixture efficacy and initial cost of the fixture are more important for return on investment than spectral distribution at high photon flux.

Effect of Colonization of Trichoderma harzianum on Growth Development and CBD Content of Hemp (Cannabis sativa L.)

Trichoderma harzianum, as a natural endophytic biocontrol agent, can ameliorate plant development, nutrient uptake, and resistance to biotic and abiotic stresses. This study aimed to investigate the effect of Trichoderma harzianum inoculation on agronomical and quality characteristics of two monoecious hemp (Cannabis sativa L.) varieties, Fedora 17 and Felina. A greenhouse pot experiment was conducted in a completely randomized design of two treatments of Trichoderma harzianum with a low and high dose of the fungus (T1 and T2). The significance of differences between treatments was estimated by using a Fisher’s test with a significance level p = 0.05. The root density of both varieties was significantly affected by treatments, and higher values were recorded in Fedora 17 (2.32 mm cm⁻³). The Arbuscular Mycorrhizal Fungi (AMF) colonization of the root system and the soil emission of CO₂ were higher after the inoculation of Trichoderma harzianum. The highest values of plant height and dry weight were noticed for T2, especially in variety Felina. Trichoderma harzianum positively influenced characteristics of inflorescences such as their number, fresh weight moisture, and compactness in both varieties, while the dry weight, length, and dry yield of inflorescences were not improved. Finally, the fertigation of Trichoderma harzianum in hemp plants was beneficial by increasing the cannabidiol (CBD) content, especially in T2 treatment (4 × 10¹² CFU kg⁻¹).

Cannabis sativa: Interdisciplinary Strategies and Avenues for Medical and Commercial Progression Outside of CBD and THC

Cannabis sativa (Cannabis) is one of the world’s most well-known, yet maligned plant species. However, significant recent research is starting to unveil the potential of Cannabis to produce secondary compounds that may offer a suite of medical benefits, elevating this unique plant species from its illicit narcotic status into a genuine biopharmaceutical. This review summarises the lengthy history of Cannabis and details the molecular pathways that underpin the production of key secondary metabolites that may confer medical efficacy. We also provide an up-to-date summary of the molecular targets and potential of the relatively unknown minor compounds offered by the Cannabis plant. Furthermore, we detail the recent advances in plant science, as well as synthetic biology, and the pharmacology surrounding Cannabis. Given the relative infancy of Cannabis research, we go on to highlight the parallels to previous research conducted in another medically relevant and versatile plant, Papaver somniferum (opium poppy), as an indicator of the possible future direction of Cannabis plant biology. Overall, this review highlights the future directions of cannabis research outside of the medical biology aspects of its well-characterised constituents and explores additional avenues for the potential improvement of the medical potential of the Cannabis plant.

Can public online databases serve as a source of phenotypic information for Cannabis genetic association studies?

The use of Cannabis is gaining greater social acceptance for its beneficial medicinal and recreational uses. With this acceptance has come new opportunities for crop management, selective breeding, and the potential for targeted genetic manipulation. However, as an agricultural product Cannabis lags far behind other domesticated plants in knowledge of the genes and genetic variation that influence plant traits of interest such as growth form and chemical composition. Despite this lack of information, there are substantial publicly available resources that document phenotypic traits believed to be associated with particular Cannabis varieties. Such databases could be a valuable resource for developing a greater understanding of genes underlying phenotypic variation if combined with appropriate genetic information. To test this potential, we collated phenotypic data from information available through multiple online databases. We then produced a Cannabis SNP database from 845 strains to examine genome wide associations in conjunction with our assembled phenotypic traits. Our goal was not to locate Cannabis-specific genetic variation that correlates with phenotypic variation as such, but rather to examine the potential utility of these databases more broadly for future, explicit genome wide association studies (GWAS), either in stand-alone analyses or to complement other types of data. For this reason, we examined a very broad array of phenotypic traits. In total, we performed 201 distinct association tests using web-derived phenotype data appended to 290 uniquely named Cannabis strains. Our results indicated that chemical phenotypes, such as tetrahydrocannabinol (THC) and cannabidiol (CBD) content, may have sufficiently high-quality information available through web-based sources to allow for genetic association inferences. In many cases, variation in chemical traits correlated with genetic variation in or near biologically reasonable candidate genes, including several not previously implicated in Cannabis chemical variation. As with chemical phenotypes, we found that publicly available data on growth traits such as height, area of growth, and floral yield may be precise enough for use in future association studies. In contrast, phenotypic information for subjective traits such as taste, physiological affect, neurological affect, and medicinal use appeared less reliable. These results are consistent with the high degree of subjectivity for such trait data found on internet databases, and suggest that future work on these important but less easily quantifiable characteristics of Cannabis may require dedicated, controlled phenotyping.

Impact of Different Phytohormones on Morphology, Yield and Cannabinoid Content of Cannabis sativa L

The impact of exogenously applied plant growth regulators (PGR), 1-naphthalenaecetic acid (NAA), 6-benzylaminopurine (BAP), and a mixture of both (NAA/BAP-mix), was investigated in regard to plant height, length of axillary branches, number of internodes, biomass yield and cannabinoid content of three different phytocannabinoid-rich (PCR) Cannabis genotypes. The results showed that total plant height was significantly reduced under the application of NAA (28%), BAP (18%), and NAA/BAP-mix treated plants (15%). Axillary branch length was also significantly reduced by 58% (NAA) and 30% (NAA/BAP-mix). BAP did not significantly reduce the length of axillary branches. The number of internodes was reduced by NAA (19%), BAP (10%), and the NAA/BAP-mix (14%) compared to the untreated control. NAA application influenced the plant architecture of the tested cv. KANADA beneficially, resulting in a more compact growth habitus, while inflorescence yield (23.51 g plant-1) remained similar compared to the control (24.31 g plant-1). Inflorescence yield of v. 0.2x and cv. FED was reduced due to PGR application while cannabinoid content remained stable. Overall, the application of PGR could be used on a genotype-specific level to beneficially influence plant architecture and optimize inflorescence yield per unit area and thus cannabinoid yield, especially in the presence of space limitations under indoor cultivation.

Photochemical efficiency is negatively correlated with the Δ9- tetrahydrocannabinol content in Cannabis sativa L

Cannabis sativa L is an important plant, which is a source of durable fibers, nutritious seeds, and medicinally important phytocannabinoids including Δ⁹-tetrahydrocannabinol (THC) and cannabidiol (CBD). Light has shown to be a key modulator of biomass and cannabinoid yield suggesting responsive photochemical machinery. The present study was envisaged to understand the effect of the increasing levels of metabolic THC on the photochemical efficiency in Cannabis. The chlorophyll a fluorescence kinetics, photosynthetic pigments and immuno-detection of the photosynthetic machinery was analyzed on seven accessions from different environments, in conjunction with the cannabinoid content. All the accessions were clearly divided into three groups based on their relative content of CBD and THC. Group I with (CBD/THC > 1) had a clear advantage in terms of the damage to the D1, RbCL and Lhc1 protein holo-complex. Performance indicators of photochemistry based on the OJIP kinetics suggested a stoichiometrically negative correlation with the THC content. Zeaxanthin-dependent quenching is primarily responsible for lower NPQ in Group III with high THC content (THC > 6%). The THC treatment on Arabidopsis thaliana also suggested dose-dependent decrease in the photochemical efficiency suggesting the exclusivity of THC in causing the response. This resulted in the damage of photosynthetic machinery and the generation of free radicals, thereby compromising the yield. The study also opens a new screening method for Cannabis, based on cannabinoid content.

Scientific Prospects for Cannabis-Microbiome Research to Ensure Quality and Safety of Products

Cannabis legalization has occurred in several countries worldwide. Along with steadily growing research in Cannabis healthcare science, there is an increasing interest for scientific-based knowledge in plant microbiology and food science, with work connecting the plant microbiome and plant health to product quality across the value chain of cannabis. This review paper provides an overview of the state of knowledge and challenges in Cannabis science, and thereby identifies critical risk management and safety issues in order to capitalize on innovations while ensuring product quality control. It highlights scientific gap areas to steer future research, with an emphasis on plant-microbiome sciences committed to using cutting-edge technologies for more efficient Cannabis production and high-quality products intended for recreational, pharmaceutical, and medicinal use.

Expression of Putative Defense Responses in Cannabis Primed by Pseudomonas and/or Bacillus Strains and Infected by Botrytis cinerea

Cannabis (Cannabis sativa L.) offers many industrial, agricultural, and medicinal applications, but is commonly threatened by the gray mold disease caused by the fungus Botrytis cinerea. With few effective control measures currently available, the use of beneficial rhizobacteria represents a promising biocontrol avenue for cannabis. To counter disease development, plants rely on a complex network of inducible defense pathways, allowing them to respond locally and systemically to pathogens attacks. In this study, we present the first attempt to control gray mold in cannabis using beneficial rhizobacteria, and the first investigation of cannabis defense responses at the molecular level. Four promising Pseudomonas (LBUM223 and WCS417r) and Bacillus strains (LBUM279 and LBUM979) were applied as single or combined root treatments to cannabis seedlings, which were subsequently infected by B. cinerea. Symptoms were recorded and the expression of eight putative defense genes was monitored in leaves by reverse transcription quantitative polymerase chain reaction. The rhizobacteria did not significantly control gray mold and all infected leaves were necrotic after a week, regardless of the treatment. Similarly, no systemic activation of putative cannabis defense genes was reported, neither triggered by the pathogen nor by the rhizobacteria. However, this work identified five putative defense genes (ERF1, HEL, PAL, PR1, and PR2) that were strongly and sustainably induced locally at B. cinerea's infection sites, as well as two stably expressed reference genes (TIP41 and APT1) in cannabis. These markers will be useful in future researches exploring cannabis defense pathways.

Plant Growth-Promoting Rhizobacteria for Cannabis Production: Yield, Cannabinoid Profile and Disease Resistance

Legal Cannabis production is now experiencing growing consumer demand due to changing legislation around the world. However, because of heavy restrictions on cannabis cultivation over the past century, little scientific research has been conducted on this crop, in particular around use of members of the phytomicrobiome to improve crop yields. Recent developments in the field of plant science have demonstrated that application of microbes, isolated from the rhizosphere, have enormous potential to improve yields, in particular under stressful growing conditions. This perspective carefully examines the potential for plant growth-promoting rhizobacteria (PGPR) to improve marijuana and hemp yield and quality. It then explores the potential use of PGPR for biological control of plant pathogens, which is particularly interesting given the stringent regulation of pesticide residues on this crop. As an industry-relevant example, biocontrol of powdery mildew, a common and deleterious pathogen affecting cannabis production, is assessed. Finally, two PGPR in genera frequently associated with higher plants (Pseudomonas and Bacillus) were selected as case studies for the potential effects on growth promotion and disease biocontrol in commercial cannabis production.