Biosynthesis and characterization of iron oxide nanoparticles from Mentha spicata and screening its combating potential against Phytophthora infestans

Mentha spicata Mediated Formulation of Iron Oxide Nanoparticles Exhibit Superior Antimicrobial, Antioxidant, and Photodegradation Propensity Compared to Chemically Formulated Counterparts

INTRODUCTION

Iron oxide nanoparticles demonstrate tremendous potential in preserving the ecological balance of the environment since they act as antimicrobial agents and efficient photocatalysts. However, environmental sustainability has challenged the synthesis protocols of nanomaterials.

METHODS

This study compares the green synthesis method with the scalable chemical synthesis method. In this work, Iron oxide nanoparticles were fabricated via the green chemistry technique utilizing the leaf extract of Mentha spicata (M-IONP) and also via the chemical co-precipitation method (C-IONP). The synthesized IONPs were analyzed by different characterization methods such as XRD, FTIR, SEM analysis, ZETA potential measurements, and DLS spectroscopy analysis.

RESULTS

The biosynthesized and chemically synthesized IONPs were analyzed for their mechanistic action against different applications like antimicrobial, antioxidant, and degradation of harmful dyes. Interestingly, the biosynthesized IONPs (M-IONP) exhibited more effective antimicrobial efficacy towards Gram-positive and Gram-negative organisms than chemically synthesized IONPs.

CONCLUSION

The green synthesized M-IONP also showed significant antioxidant propensity similar to that of the standards taken. Additionally, green-synthesized M-IONP exhibited enhanced degradation efficacies against Methylene blue, chromium, and sulphamethoxazole in comparison to chemically synthesized IONP.

Potential biological applications of environment friendly synthesized iron oxide nanoparticles using Sageretia thea root extract

The green synthesis of Iron oxide nanoparticles (IONPs) has shown numerous advantages over conventional physical and chemical synthesis methods as these methods non-ecofriendly and uses toxic chemicals and complicated equipments. In present study, Iron oxide nanoparticles (IONPs) were created using simple, sustainable, eco-friendly and green chemistry protocol. The roots of novel medicinal plant Sageretia thea was used as a bio-template for the preparation of IONPs. Further, the synthesis of IONPs was confirmed using different analytical tools like UV-Vis, FT-IR, XRD, EDX, and SEM. The average sizes of (NPs) were found to be 16.04 nm. Further, asynthesized IONPs were evaluated for several biological potentials including antibacterial, antifungal Anti-radical potentials (DPPH) and cytotoxicity assays. Antibacterial potencies were investigated using bacterial strains (in the concentration range of 1000-31.25 µg/mL) revealing significant antibacterial potentials. ABA and SAU was reported to be least susceptible while KPN was observed to be most susceptible strain in bactericidal studies. Further, different fungal strains were used to investigate the antifungal potentials of IONPs (in the concentration range of 1000-31.25 µg/mL) and revealed strong antifungal potencies against different pathogenic strains. Furthermore, MRA, FA and ANI were most susceptible and ABA was least susceptible in fungicidal examination. Significant cytotoxicity potential was examined using brine shrimps cytotoxicity assay, thus revealing the cytotoxic potential of asynthesized IONPs. The IC50 for S. thea based IONPs was recorded as 33.85 µg/mL. Strong anti-radical potentials (DPPH) assay was performed to evaluate the ROS scavenging potential of S.T@IONPs. The highest scavenging potential was noted as 78.06%, TRP as 81.92% and TAC as 84% on maximum concentration of 200 µg/mL. In summary, our experimental results concluded, that asynthesized IONPs have strong antibacterial, antifungal, DPPH scavenging and cytotoxic potentials and can be used in different biological applications. In nutshell, our as-prepared nanoparticles have shown potential bioactivities and we recommend, different other in vitro and in vivo biological and bioactivities to further analyze the biological potentials.

A comparative anticancer analysis of iron oxide nanoparticles of Hippophae rhamnoides and Cichorium intybus found in the Karakoram Range of Gilgit Baltistan against liver cancer targeting the RhoA gene

OBJECTIVE

The current research work focused on the evaluation of of H. rhamnoides and C. intybus Fe2O3 NPs against liver cancer cell line (HepG2) by performing antiproliferative assay targeting the RhoA gene and apoptotic pathway genes and proteins.

METHODS

Fe2O3 NPs were synthesized using extracts of H. rhamnoides and C. intybus and characterized by UV-Vis spectroscopy, FTIR, SEM/EDS and XRD. MTT assay was used to study cytotoxicity against the HepG2 cells. Real-time qPCR and ELISA were used for the gene and protein analysis.

RESULTS

An absorbance peak at 300 nm for H. rhamnoides and 289 nm for C. intybus nanoparticles were observed by UV-Vis analysis. The FTIR bands of H. rhamnoide Fe2O3 NPs suggested the presence of aldehydes, alcohols and polyols whereas bands of C. intybus Fe2O3 NPs suggested the presence of carboxyl groups, hydroxyl groups, alkynes and amines. The size of Fe2O3 NPs was found to be 27 ± 5nm for H. rhamnoides and 84 ± 4nm for C. intybus. The IC50 value of 41.69 µM for H. rhmnoides and 71.04 µM for C. intybus Fe2O3 NPs compared to plant extract (78.10 and 96.03 µM for H. rhamnoides and C. intybus, respectively) were found against HepG2 cells. The gene expression and protein levels of RhoA were decreased whereas those of bax, caspase 3, caspase 8 and caspase 9 were found increased.

CONCLUSION

Nanoparticles and extract of H. rhamnoides were found more effective as compared to C. intybus, which was evident by the results of cytotoxicity and analysis of studied genes and proteins.

Recent Trends in Biologically Synthesized Metal Nanoparticles and their Biomedical Applications: a Review

In recent years, biologically synthesized metal nanoparticles have emerged as a dynamic field of research with significant implications for biomedical applications. This review explores the latest trends in the synthesis of metal nanoparticles using biological methods, encompassing plant extracts and microorganisms such as bacteria, yeasts, and fungi. These innovative approaches offer a sustainable, cost-effective, and environmentally friendly alternative to conventional chemical synthesis methods. Moreover, this review delves into the multifaceted biomedical applications of biologically synthesized metal nanoparticles. These applications include drug delivery systems, diagnostics, therapeutics, and imaging technologies, showcasing the versatility and promise of these nanomaterials in addressing contemporary biomedical challenges. In addition, the review addresses the critical issue of cytotoxicity, offering insights into the safety and viability of these biologically derived NPs for medical use. The exploration of recent trends and advancements in this field underscores the transformative potential of biologically synthesized metal nanoparticles in revolutionizing biomedical research and healthcare.

Zinc oxide and copper oxide nanoparticles as a potential solution for controlling Phytophthora infestans, the late blight disease of potatoes

Late blight, caused by Phytophthora infestans, is a major potato disease globally, leading to significant economic losses of $6.7 billion. To address this issue, we evaluated the antifungal activity of ZnO and CuO nanoparticles (NPs) against P. infestans for the first time in laboratory and greenhouse conditions. Nanoparticles were synthesized via a chemical precipitation method and characterized using various techniques. The XRD results revealed that the synthesized ZnO nanoparticles had a pure hexagonal wurtzite crystalline structure, whereas the CuO NPs had a monoclinic crystalline structure. TEM images confirmed the synthesis of quasi-spherical nanoparticles with an average size of 11.5 nm for ZnO NPs and 24.5 nm for CuO NPs. The UV-Vis Spectral Report showed peaks corresponding to ZnO NPs at 364 nm and 252 nm for CuO NPs.In an in vitro study, both ZnO and CuO NPs significantly (p < 0.05) inhibited the radial growth of P. infestans at all tested concentrations compared to the untreated control. The highest inhibitory effect of 100% was observed with ZnO and CuO NPs at 30 mg/L. A lower inhibition of 60.4% was observed with 10 mg/L CuO NPs. Under greenhouse conditions, 100 mg/L ZnO NPs was the most effective treatment for controlling potato late blight, with an efficacy of 71%. CuO NPs at 100 mg/L followed closely, with an efficacy of 69%. Based on these results, ZnO and CuO NPs are recommended as promising eco-friendly fungicides for the management and control of potato late blight after further research.

Biogenic synthesis, characterization, and in vitro biological investigation of silver oxide nanoparticles (AgONPs) using Rhynchosia capitata

The current research aimed to study the green synthesis of silver oxide nanoparticles (AgONPs) using Rhynchosia capitata (RC) aqueous extract as a potent reducing and stabilizing agent. The obtained RC-AgONPs were characterized using UV, FT-IR, XRD, DLS, SEM, and EDX to investigate the morphology, size, and elemental composition. The size of the RC-AgONPs was found to be ~ 21.66 nm and an almost uniform distribution was executed by XRD analysis. In vitro studies were performed to reveal biological potential. The AgONPs exhibited efficient DPPH free radical scavenging potential (71.3%), reducing power (63.8 ± 1.77%), and total antioxidant capacity (88.5 ± 4.8%) to estimate their antioxidative power. Antibacterial and antifungal potentials were evaluated using the disc diffusion method against various bacterial and fungal strains, and the zones of inhibition (ZOI) were determined. A brine shrimp cytotoxicity assay was conducted to measure the cytotoxicity potential (LC50: 2.26 μg/mL). In addition, biocompatibility tests were performed to evaluate the biocompatible nature of RC-AgONPs using red blood cells, HEK, and VERO cell lines (< 200 μg/mL). An alpha-amylase inhibition assay was carried out with 67.6% inhibition. Moreover, In vitro, anticancer activity was performed against Hep-2 liver cancer cell lines, and an LC50 value of 45.94 μg/mL was achieved. Overall, the present study has demonstrated that the utilization of R. capitata extract for the biosynthesis of AgONPs offers a cost-effective, eco-friendly, and forthright alternative to traditional approaches for silver nanoparticle synthesis. The RC-AgONPs obtained exhibited significant bioactive properties, positioning them as promising candidates for diverse applications in the spheres of medicine and beyond.

A narrative review of the synthesis, characterization, and applications of iron oxide nanoparticles

The significance of green synthesized nanomaterials with a uniform shape, reduced sizes, superior mechanical capabilities, phase microstructure, magnetic behavior, and superior performance cannot be overemphasized. Iron oxide nanoparticles (IONPs) are found within the size range of 1-100 nm in nanomaterials and have a diverse range of applications in fields such as biomedicine, wastewater purification, and environmental remediation. Nevertheless, the understanding of their fundamental material composition, chemical reactions, toxicological properties, and research methodologies is constrained and extensively elucidated during their practical implementation. The importance of producing IONPs using advanced nanofabrication techniques that exhibit strong potential for disease therapy, microbial pathogen control, and elimination of cancer cells is underscored by the adoption of the green synthesis approach. These IONPs can serve as viable alternatives for soil remediation and the elimination of environmental contaminants. Therefore, this paper presents a comprehensive analysis of the research conducted on different types of IONPs and IONP composite-based materials. It examines the synthesis methods and characterization techniques employed in these studies and also addresses the obstacles encountered in prior investigations with comparable objectives. A green engineering strategy was proposed for the synthesis, characterization, and application of IONPs and their composites with reduced environmental impact. Additionally, the influence of their phase structure, magnetic properties, biocompatibility, toxicity, milling time, nanoparticle size, and shape was also discussed. The study proposes the use of biological and physicochemical methods as a more viable alternative nanofabrication strategy that can mitigate the limitations imposed by the conventional methods of IONP synthesis.

Antimicrobial efficacy of Mentha piperata-derived biogenic zinc oxide nanoparticles against UTI-resistant pathogens

Misuse of antibiotics leads to the worldwide spread of antibiotic resistance, which motivates scientists to create new antibiotics. The recurring UTI due to antibiotics-resistant microorganism's challenges scientists globally. The biogenic nanoparticles have the potential to meet the escalating requirements of novel antimicrobial agents. The green synthesis of nanoparticles (NPs) gained more attention due to their reliable applications against resistant microbes. The current study evaluates the biogenic ZnO NPs of Mentha piperata extract against resistant pathogens of urinary tract infections by agar well diffusion assay. The biogenic ZnO NPs revealed comparatively maximum inhibition in comparison to synthetic antibiotics against two bacterial strains (Proteus mirabilis, Pseudomonas aeruginosa) and a fungal strain (Candida albicans).The synthesized biogenic ZnO NPs alone revealed maximum activities than the combination of plant extract (PE) and ZnO NPs, and PE alone. The physiochemical features of ZnO NPs characterized through UV-Vis spectroscopy, FTIR, XRD, SEM, and EDX. The UV-Vis spectroscopy revealed 281.85 nm wavelengths; the XRD pattern revealed the crystalline structure of ZnO NPs. The FTIR analysis revealed the presence of carboxylic and nitro groups, which could be attributed to plant extract. SEM analysis revealed spherical hollow symmetry due to electrostatic forces. The analysis via EDX confirmed the presence of Zn and oxygen in the sample. The physiochemical features of synthesized ZnO NPs provide pivotal information such as quality and effectiveness. The current study revealed excellent dose-dependent antimicrobial activity against the pathogenic isolates from UTI-resistant patients. The higher concentration of ZnONPs interacts with the cell membrane which triggers oxidative burst. They may bind with the enzymes and proteins and brings epigenetic alteration which leads to membrane disruption or cell death.

Novel nanotechnological approaches for managing Phytophthora diseases of plants

Members of the Phytophthora genus are soil-dwelling pathogens responsible for diseases of several important plants. Among these, Phytophthora infestans causes late blight of potatoes, which was responsible for the Irish potato famine during the mid-19th century. Various strategies have been applied to control Phytophthora, including integrated management programs (IMPs) and quarantine, but without successful full management of the disease. Thus, there is a need to search for alternative tools. Here, we discuss the emerging role of nanomaterials in the detection and treatment of Phytophthora species, including slow delivery of agrochemicals (microbicides and pesticides). We propose integrating these tools into an IMP, which could lead to a reduction in pesticide use and provide more effective and sustainable control of Phytophthora pathogens.

Antibacterial Efficacy of Green Synthesized Silver Nanoparticles Using Salvia nubicola Extract against Ralstonia solanacearum, the Causal Agent of Vascular Wilt of Tomato

Ralstonia solanacearum is a phytopathogen causing bacterial wilt diseases of tomato and affecting its productivity, which leads to prominent economic losses annually. As an alternative to conventional pesticides, green synthesized nanoparticles are believed to possess strong antibacterial activities besides being cheap and ecofriendly. Here, we present the synthesis of silver nanoparticles (Sn-AgNPs) from medicinally important aqueous plant extracts of Salvia nubicola. Characterization of biologically synthesized nanoparticles was performed through UV-vis spectrophotometry, Fourier transform infrared spectroscopy (FTIR), energy-dispersive X-ray spectroscopy, X-ray diffraction, scanning electron microscopy, transmission electron microscopy (TEM), and thermogravimetric analysis. The antibacterial activity of the biosynthesized silver nanoparticles was tested against the phytopathogen R. solanacearum through in vitro experiments. Preliminary phytochemical analysis of the plant extracts revealed the presence of substantial amounts of flavonoids (57.08 mg GAE/g), phenolics (42.30 mg GAE/g), tannins, and terpenoids. The HPLC phenolic profile indicated the presence of 25 possible bioactive compounds. Results regarding green synthesized silver nanoparticles revealed the conformation of different functional groups through FTIR analysis, which could be responsible for the bioreduction and capping of Ag ions into silver NPs. TEM results revealed the spherical, crystalline shape of nanoparticles with the size in the range of 23-63 nm, which validates SEM results. Different concentrations of Sn-AgNPs (T1 (500 μg/mL) to T7 (78.1 μg/mL)) with a combination of plant extracts (PE-Sn-AgNPs) and plant extracts alone exhibited an efficient inhibition of R. solanacearum. These findings could be used as an effective alternative preparation against the bacterial wilt of tomato.

Fabrication and Characterization of Ag-Graphene Nanocomposites and Investigation of Their Cytotoxic, Antifungal and Photocatalytic Potential

In the present study, we aimed to synthesize (Ag)_1-x(GNPs)_x nanocomposites in variable ratios (25% GNPs-Ag, 50% GNPs-Ag, and 75% GNPs-Ag) via an ex situ approach to investigate the incremental effects of GNPs (graphene nanoparticles) on AgNPs (silver nanoparticles). The prepared nanocomposites were successfully characterized using different microscopic and spectroscopic techniques, including X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, ultraviolet spectroscopy, and Raman spectroscopic analysis. For the evaluation of morphological aspects, shape, and percentage elemental composition, SEM and EDX analyses were employed. The bioactivities of the synthesized nanocomposites were briefly investigated. The antifungal activity of (Ag)_1-x(GNPs)_x nanocomposites was reported to be 25% for AgNPs and 66.25% using 50% GNPs-Ag against Alternaria alternata. The synthesized nanocomposites were further evaluated for cytotoxic potential against U87 cancer cell lines with improved results (for pure AgNPs IC₅₀: ~150 µg/mL, for 50% GNPs-Ag IC₅₀: ~12.5 µg/mL). The photocatalytic properties of the nanocomposites were determined against the toxic dye Congo red, and the percentage degradation was recorded as 38.35% for AgNPs and 98.7% for 50% GNPs-Ag. Hence, from the results, it is concluded that silver nanoparticles with carbon derivatives (graphene) have strong anticancer and antifungal properties. Dye degradation strongly confirmed the photocatalytic potential of Ag-graphene nanocomposites in the removal of toxicity present in organic water pollutants.

A Novel Based Synthesis of Silver/Silver Chloride Nanoparticles from Stachys emodi Efficiently Controls Erwinia carotovora, the Causal Agent of Blackleg and Soft Rot of Potato

In recent years, the biological synthesis of silver nanoparticles has captured researchers’ attention due to their unique chemical, physical and biological properties. In this study, we report an efficient, nonhazardous, and eco-friendly method for the production of antibacterial silver/silver chloride nanoparticles utilizing the leaf extract of Stachys emodi. The synthesis of se-Ag/AgClNPs was confirmed using UV-visible spectroscopy, DPPH free radical scavenging activity, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and X-ray diffraction (XRD). An intense peak absorbance was observed at 437 nm from the UV-visible analysis. The Stachys emodi extract showed the highest DPPH scavenging activity (89.4%). FTIR analysis detected various bands that indicated the presence of important functional groups. The SEM morphological study revealed spherical-shaped nanoparticles having a size ranging from 20 to 70 nm. The XRD pattern showed the formation of a spherical crystal of NPs. The antibacterial activity performed against Erwinia carotovora showed the maximum inhibition by centrifuged silver nanoparticles alone (se-Ag/AgClNPs) and in combination with leaf extract (se-Ag/AgClNPs + LE) and leaf extract (LE) of 98%, 93%, and 62% respectively. These findings suggested that biosynthesized NPs can be used to control plant pathogens effectively.

Biocatalysis as a Green Approach for Synthesis of Iron Nanoparticles—Batch and Microflow Process Comparison

There is a growing need for production of iron particles due to their possible use in numerous systems (e.g., electrical, magnetic, catalytic, biological and others). Although severe reaction conditions and heavy solvents are frequently used in production of nanoparticles, green synthesis has arisen as an eco-friendly method that uses biological catalysts. Various precursors are combined with biological material (such as enzymes, herbal extracts, biomass, bacteria or yeasts) that contain chemicals from the main or secondary metabolism that can function as catalysts for production of nanoparticles. In this work, batch (“one-pot”) biosynthesis of iron nanoparticles is reviewed, as well as the possibilities of using microfluidic systems for continuous biosynthesis of iron nanoparticles, which could overcome the limitations of batch synthesis.

Improvement of heat stress tolerance in soybean (Glycine max L), by using conventional and molecular tools

The soybean is a significant legume crop, providing several vital dietary components. Extreme heat stress negatively affects soybean yield and quality, especially at the germination stage. Continuous change in climatic conditions is threatening the global food supply and food security. Therefore, it is a critical need of time to develop heat-tolerant soybean genotypes. Different molecular techniques have been developed to improve heat stress tolerance in soybean, but until now complete genetic mechanism of soybean is not fully understood. Various molecular methods, like quantitative trait loci (QTL) mapping, genetic engineering, transcription factors (TFs), transcriptome, and clustered regularly interspaced short palindromic repeats (CRISPR), are employed to incorporate heat tolerance in soybean under the extreme conditions of heat stress. These molecular techniques have significantly improved heat stress tolerance in soybean. Besides this, we can also use specific classical breeding approaches and different hormones to reduce the harmful consequences of heat waves on soybean. In future, integrated use of these molecular tools would bring significant results in developing heat tolerance in soybean. In the current review, we have presented a detailed overview of the improvement of heat tolerance in soybean and highlighted future prospective. Further studies are required to investigate different genetic factors governing the heat stress response in soybean. This information would be helpful for future studies focusing on improving heat tolerance in soybean.

Biosynthesized silver nanoparticles using Polygonatum geminiflorum efficiently control fusarium wilt disease of tomato

Nanomaterials are gaining tremendous potential as emerging antimicrobials in the quest to find resistance-free alternatives of chemical pesticides. In this study, stable silver nanoparticles were synthesized using the aqueous extract of medicinal plant species Polygonatum geminiflorum , and their morphological features were evaluated by transmission electron microscopy, X-ray diffraction spectroscopy and energy dispersive X-ray analysis. In vitro Antifungal activity of the synthesized silver nanoparticles (AgNPs) and P. geminiflorum extract (PE) either alone or in combination (PE-AgNPs) against Fusarium oxysporum was evaluated using disc-diffusion and well-diffusion methods. In planta assay of the same treatments against Fusarium wilt diseases of tomato was evaluated by foliar spray method. Moreover, plant extract was evaluated for the quantitative investigation of antioxidant activity, phenolics and flavonoids by spectroscopic and HPLC techniques. Phytochemical analysis indicated the presence of total phenolic and flavonoid contents as 48.32 mg ± 1.54 mg GAE/g and 57.08 mg ± 1.36 mg QE/g, respectively. The DPPH radical scavenging of leaf extract was found to be 88.23% ± 0.87%. Besides, the HPLC phenolic profile showed the presence of 15 bioactive phenolic compounds. Characterization of nanoparticles revealed the size ranging from 8 nm to 34 nm with average crystallite size of 27 nm. The FTIR analysis revealed important functional groups that were responsible for the reduction and stabilization of AgNPs. In the in vitro assays, 100 μg/ml of AgNPs and AgNPs-PE strongly inhibited Fusarium oxysporum. The same treatments tested against Fusarium sprayed on tomato plants in controlled environment exhibited nearly 100% plant survival with no observable phytotoxicity. These finding provide a simple baseline to control Fusarium wilt using silver nano bio-control agents without affecting the crop health.