Synergies with and Resistance to Membrane-Active Peptides

Synthesis and Evaluation of Melittin-Modified Peptides for Antibacterial Activity

Melittin, a naturally occurring antimicrobial peptide, demonstrates broad-spectrum activity, effectively suppressing and eliminating both Gram-positive and Gram-negative bacteria, including specific drug-resistant strains. In this study, molecular simulation software was employed to investigate and modify the structure of melittin with the aim of synthesizing a modified peptide exhibiting enhanced antibacterial potency and assessing its bacteriostatic and antibacterial properties. The primary research objectives were as follows: 1. Preparation and characterization of melittin-modified peptide-Using molecular simulation software, the structure of the melittin-modified peptide was adjusted to predict its activity and select the most appropriate amino acid sequence. The peptide was synthesized through solid-phase peptide synthesis employing the Fmoc strategy and subsequently purified using liquid chromatography. The yield of the purified modified melittin was determined to be 30.97%, and the identity of the product was confirmed by LC-MS and MALDI-TOF-MS. 2. Evaluation of the antimicrobial activity of the melittin-modified peptide-The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of melittin and its modified peptide were measured using gradient dilution and plate counting techniques. The results revealed that both melittin and its modified peptide exhibited strong antibacterial efficacy against Gram-positive and Gram-negative bacteria, as well as certain drug-resistant strains. This showed that melittin and its modified peptide have the same antibacterial (killing) effect. A scanning electron microscope analysis indicated that both melittin and its modified peptide were capable of disrupting bacterial cell structures, leading to bacterial cell death.

Cationicity Enhancement on the Hydrophilic Face of Ctriporin Significantly Reduces Its Hemolytic Activity and Improves the Antimicrobial Activity against Antibiotic-Resistant ESKAPE Pathogens

The ESKAPE pathogen-associated antimicrobial resistance is a global public health issue, and novel therapeutic strategies are urgently needed. The short cationic antimicrobial peptide (AMP) family represents an important subfamily of scorpion-derived AMPs, but high hemolysis and poor antimicrobial activity hinder their therapeutic application. Here, we recomposed the hydrophilic face of Ctriporin through lysine substitution. We observed non-linear correlations between the physiochemical properties of the peptides and their activities, and significant deviations regarding the changes of antimicrobial activities against different bacterial species, as well as hemolytic activity. Most importantly, we obtained two Ctriporin analogs, CM5 and CM6, these two have significantly reduced hemolytic activity and more potent antimicrobial activities against all tested antibiotic-resistant ESKAPE pathogens. Fluorescence experiments indicated they may perform the bactericidal function through a membrane-lytic action model. Our work sheds light on the potential of CM5 and CM6 in developing novel antimicrobials and gives clues for optimizing peptides from the short cationic AMP family.

SMR peptide antagonizes Staphylococcus aureus biofilm formation

The emergence and international dissemination of multi-drug resistant Staphylococcus aureus (S. aureus) strains challenge current antibiotic-based therapies, representing an urgent threat to public health worldwide. In the U.S. alone, S. aureus infections are responsible for 11,000 deaths and 500,000 hospitalizations annually. Biofilm formation is a major contributor to antibiotic tolerance and resistance-induced delays in empirical therapy with increased infection severity, frequency, treatment failure, and mortality. Developing novel treatment strategies to prevent and disrupt biofilm formation is imperative. In this article, we test the Secretion Modification Region (SMR) peptides for inhibitory effects on resistant S. aureus biofilm-forming capacity by targeting the molecular chaperone DnaK. The dose effect of SMR peptides on biofilm formation was assessed using microtiter plate methods and confocal microscopy. Interaction between the antagonist and DnaK was determined by immune precipitation with anti-Flag M2 Affinity and Western blot analysis. Increasing SMR peptide concentrations exhibited increasing blockade of S. aureus biofilm formation with significant inhibition found at 18 µM, 36 µM, and 72 µM. This work supports the potential therapeutic benefit of SMR peptides in reducing biofilm viability and could improve the susceptibility to antimicrobial agents.IMPORTANCEThe development of anti-biofilm agents is critical to restoring bacterial sensitivity, directly combating the evolution of resistance, and overall reducing the clinical burden related to pervasive biofilm-mediated infections. Thus, in this study, the SMR peptide, a novel small molecule derived from the HIV Nef protein, was preliminarily explored for anti-biofilm properties. The SMR peptide was shown to effectively target the molecular chaperone DnaK and inhibit biofilm formation in a dose-dependent manner. These results support further investigation into the mechanism of SMR peptide-mediated biofilm formation and inhibition to benefit rational drug design and the identification of therapeutic targets.

Membrane-Active Peptides and Their Potential Biomedical Application

Membrane-active peptides (MAPs) possess unique properties that make them valuable tools for studying membrane structure and function and promising candidates for therapeutic applications. This review paper provides an overview of the fundamental aspects of MAPs, focusing on their membrane interaction mechanisms and potential applications. MAPs exhibit various structural features, including amphipathic structures and specific amino acid residues, enabling selective interaction with multiple membranes. Their mechanisms of action involve disrupting lipid bilayers through different pathways, depending on peptide properties and membrane composition. The therapeutic potential of MAPs is significant. They have demonstrated antimicrobial activity against bacteria and fungi, making them promising alternatives to conventional antibiotics. MAPs can selectively target cancer cells and induce apoptosis, opening new avenues in cancer therapeutics. Additionally, MAPs serve as drug delivery vectors, facilitating the transport of therapeutic cargoes across cell membranes. They represent a fascinating class of biomolecules with significant potential in basic research and clinical applications. Understanding their mechanisms of action and designing peptides with enhanced selectivity and efficacy will further expand their utility in diverse fields. Exploring MAPs holds promise for developing novel therapeutic strategies against infections, cancer, and drug delivery challenges.

Mycobacterium tuberculosis cell-wall and antimicrobial peptides: a mission impossible?

Mycobacterium tuberculosis (Mtb) is one of the most important infectious agents worldwide and causes more than 1.5 million deaths annually. To make matters worse, the drug resistance among Mtb strains has risen substantially in the last few decades. Nowadays, it is not uncommon to find patients infected with Mtb strains that are virtually resistant to all antibiotics, which has led to the urgent search for new molecules and therapies. Over previous decades, several studies have demonstrated the efficiency of antimicrobial peptides to eliminate even multidrug-resistant bacteria, making them outstanding candidates to counterattack this growing health problem. Nevertheless, the complexity of the Mtb cell wall makes us wonder whether antimicrobial peptides can effectively kill this persistent Mycobacterium. In the present review, we explore the complexity of the Mtb cell wall and analyze the effectiveness of antimicrobial peptides to eliminate the bacilli.

Discovery and Mechanism of Action of a Novel Antimicrobial Peptide from an Earthworm

The robust innate immune system of the earthworm provides a potential source of natural antimicrobial peptides (AMPs). However, the cost and high rediscovery rate of direct separation and purification limits their discovery. Genome sequencing of numerous earthworm species facilitates the discovery of new antimicrobial peptides. Through predicting potential antimicrobial peptides in the open reading frames of the Eisenia andrei genome and sequence optimization, a novel antimicrobial peptide, named EWAMP-R (RIWWSGGWRRWRW), was identified. EWAMP-R demonstrated good activity against various bacteria, including drug-resistant strains. The antibacterial mechanisms of EWAMP-R were explored through molecular simulation and wet-laboratory experiments. These experiments demonstrated that the bacterial membrane may be one of the targets of EWAMP-R but that there may be different interactions with Gram-negative and Gram-positive bacterial membranes. EWAMP-R can disrupt bacterial membrane integrity; however, at low concentrations, it appears that EWAMP-R may get through the membrane of Escherichia coli instead of damaging it directly, implying the existence of a secondary response. Gene expression studies identified that in E. coli, only the apoptosis-like cell death (ALD) pathway was activated, while in Staphylococcus aureus, the MazEF pathway was also upregulated, limiting the influence of the ALD pathway. The different antimicrobial actions against Gram-positive and -negative bacteria can provide important information on the structure-activity relationship of AMPs and facilitate AMP design with higher specificity. This study identified a new source of antibacterial agents that has the potential to address the increasingly serious issue of antibiotic resistance. IMPORTANCE Drug-resistant bacteria are a great threat to public health and drive the search for new antibacterial agents. The living environment of earthworms necessitates a strong immune system, and therefore, they are potentially a rich resource of novel antibiotics. A novel AMP, EWAMP-R, with high antibacterial activity was found through in silico analysis of the Eisenia andrei genome. Molecular analysis investigating the interactions between EWAMP-R and the cell membrane demonstrated the importance of tryptophan and arginine residues to EWAMP-R activity. Additionally, the different secondary responses found between E. coli and S. aureus were in accordance with a common phenomenon where some antibacterial agents only target specific species of bacteria. These results provided useful molecular information to support further AMP research and design. Our study expands the sources of antimicrobial peptides and also helps to explain the adaptability of earthworms to their environment.

Alternative Antibiotics in Dentistry: Antimicrobial Peptides

The rise of antibiotic resistant bacteria due to overuse and misuse of antibiotics in medicine and dentistry is a growing concern. New approaches are needed to combat antibiotic resistant (AR) bacterial infections. There are a number of methods available and in development to address AR infections. Dentists conventionally use chemicals such as chlorohexidine and calcium hydroxide to kill oral bacteria, with many groups recently developing more biocompatible antimicrobial peptides (AMPs) for use in the oral cavity. AMPs are promising candidates in the treatment of (oral) infections. Also known as host defense peptides, AMPs have been isolated from animals across all kingdoms of life and play an integral role in the innate immunity of both prokaryotic and eukaryotic organisms by responding to pathogens. Despite progress over the last four decades, there are only a few AMPs approved for clinical use. This review summarizes an Introduction to Oral Microbiome and Oral Infections, Traditional Antibiotics and Alternatives & Antimicrobial Peptides. There is a focus on cationic AMP characteristics and mechanisms of actions, and an overview of animal-derived natural and synthetic AMPs, as well as observed microbial resistance.

Investigation of the effects of antimicrobial and anti-biofilm peptide IDR1018 and chitosan nanoparticles on ciprofloxacin-resistant Escherichia coli

Peptide IDR1018 and chitosan nanoparticles (CNs) showed antimicrobial and anti-biofilm activity against bacteria. In this study, the antimicrobial effects of peptide IDR1018 and CNs were evaluated on 50 clinical isolates of uropathogenic Escherichia coli (UPEC) resistant to ciprofloxacin. Ion gelation method was applied for CNs synthesis. Scanning electron microscope (SEM) and dynamic light scattering (DLS) were utilized to evaluate the nanoparticles. Antimicrobial and synergistic activity of peptide IDR1018 and CNs with ciprofloxacin were evaluated by microtiter broth dilution method. The checkerboard test was used to investigate the antimicrobial effects of IDR1018 and CNS in combination with ciprofloxacin. Anti-biofilm effect of ciprofloxacin, peptide IDR1018, and CNs was evaluated using crystal violet method. Fourteen (28%), 21 (42%), and 15 (30%) of clinical isolates produced strong, moderate, and weak biofilm, respectively. The CNs were spherical and uniform under electron microscopy with an average diameter of 246 nm. The minimum inhibitory concentration (MIC) values were 16-128, 20-40, and 375-750 (µg/ml) for ciprofloxacin, peptide IDR1018, and CNs, respectively. Fractional inhibitory concentration (FIC) analysis indicated a synergistic effect of ciprofloxacin in combination with peptide IDR1018, but in combination with CNs, this antibiotic showed an additive effect. Our results revealed that peptide IDR1018 and CNs have antimicrobial properties on UPEC isolates. Biofilm inhibition and biofilm eradication of clinical isolate were shown by peptide IDR1018 and CNs in a concentration-dependent manner. The antimicrobial agents alone and in combination decreased the number of viable bacteria in the biofilms. Therefore, these components seem to be a treating approach against biofilm-forming UPEC isolates.

Investigations into the membrane activity of arenicin antimicrobial peptide AA139

Arenicin-3 is an amphipathic β-hairpin antimicrobial peptide that is produced by the lugworm Arenicola marina. In this study, we have investigated the mechanism of action of arenicin-3 and an optimized synthetic analogue, AA139, by studying their effects on lipid bilayer model membranes and Escherichia coli bacterial cells. The results show that simple amino acid changes can lead to subtle variations in their interaction with membranes and therefore alter their pre-clinical potency, selectivity and toxicity. While the mechanism of action of arenicin-3 is primarily dependent on universal membrane permeabilization, our data suggest that the analogue AA139 relies on more specific binding and insertion properties to elicit its improved antibacterial activity and lower toxicity, as exemplified by greater selectivity between lipid composition when inserting into model membranes i.e. the N-terminus of AA139 seems to insert deeper into lipid bilayers than arenicin-3 does, with a clear distinction between zwitterionic and negatively charged lipid bilayer vesicles, and AA139 demonstrates a cytoplasmic permeabilization dose response profile that is consistent with its greater antibacterial potency against E. coli cells compared to arenicin-3.

Synthetic molecular evolution of antimicrobial peptides

As we learn more about how peptide structure and activity are related, we anticipate that antimicrobial peptides will be engineered to have strong potency and distinct functions and that synthetic peptides will have new biomedical applications, such as treatments for emerging infectious diseases. As a result of the enormous number of possible amino acid sequences and the low-throughput nature of antimicrobial peptide assays, computational tools for peptide design and optimization are needed for direct experimentation toward obtaining functional sequences. Recent developments in computational tools have improved peptide design, saving labor, reagents, costs, and time. At the same time, improvements in peptide synthesis and experimental platforms continue to reduce the cost and increase the throughput of peptide-drug screening. In this review, we discuss the current methods of peptide design and engineering, including in silico methods and peptide synthesis and screening, and highlight areas of potential improvement.

Design and Manufacture of a Low-Cost Microfluidic System for the Synthesis of Giant Liposomes for the Encapsulation of Yeast Homologues: Applications in the Screening of Membrane-Active Peptide Libraries

The discovery of new membrane-active peptides (MAPs) is an area of considerable interest in modern biotechnology considering their ample applicability in several fields ranging from the development of novel delivery vehicles (via cell-penetrating peptides) to responding to the latent threat of antibiotic resistance (via antimicrobial peptides). Different strategies have been devised for such discovery process, however, most of them involve costly, tedious, and low-efficiency methods. We have recently proposed an alternative route based on constructing a non-rationally designed library recombinantly expressed on the yeasts’ surfaces. However, a major challenge is to conduct a robust and high-throughput screening of possible candidates with membrane activity. Here, we addressed this issue by putting forward low-cost microfluidic platforms for both the synthesis of Giant Unilamellar Vesicles (GUVs) as mimicking entities of cell membranes and for providing intimate contact between GUVs and homologues of yeasts expressing MAPs. The homologues were chitosan microparticles functionalized with the membrane translocating peptide Buforin II, while intimate contact was through passive micromixers with different channel geometries. Both microfluidic platforms were evaluated both in silico (via Multiphysics simulations) and in vitro with a high agreement between the two approaches. Large and stable GUVs (5–100 µm) were synthesized effectively, and the mixing processes were comprehensively studied leading to finding the best operating parameters. A serpentine micromixer equipped with circular features showed the highest average encapsulation efficiencies, which was explained by the unique mixing patterns achieved within the device. The microfluidic devices developed here demonstrate high potential as platforms for the discovery of novel MAPs as well as for other applications in the biomedical field such as the encapsulation and controlled delivery of bioactive compounds.

Study on the Structure-Activity Relationship of an Antimicrobial Peptide, Brevinin-2GUb, from the Skin Secretion of Hylarana guentheri

Antimicrobial peptides (AMPs) are considered potential alternatives to antibiotics due to their advantages in solving antibiotic resistance. Brevinin-2GUb, which was extracted from the skin secretion of Hylarana guentheri, is a peptide with modest antimicrobial activity. Several analogues were designed to explore the structure–activity relationship and enhance its activity. In general, the Rana box is not an indispensable motif for the bioactivity of Brevinin-2GUb, and the first to the 19th amino acids at the N-terminal end are active fragments, such that shortening the peptide while maintaining its bioactivity is a promising strategy for the optimisation of peptides. Keeping a complete hydrophobic face and increasing the net charges are key factors for antimicrobial activity. With the increase of cationic charges, α-helical proportion, and amphipathicity, the activity of t-Brevinin-2GUb-6K (tB2U-6K), in combatting bacteria, drastically improved, especially against Gram-negative bacteria, and the peptide attained the capacity to kill clinical isolates and fungi as well, which made it possible to address some aspects of antibiotic resistance. Thus, peptide tB2U-6K, with potent antimicrobial activity against antibiotic-resistant bacteria, the capacity to inhibit the growth of biofilm, and low toxicity against normal cells, is of value to be further developed into an antimicrobial agent.