Antibiotic Adsorption by Metal-Organic Framework (UiO-66): A Comprehensive Kinetic, Thermodynamic, and Mechanistic Study

Development of hybrid MIL-53(Al)@CBS for ternary adsorption of tetracyclines antibiotics in water: Physical interpretation of the adsorption mechanism

In this study, a hybrid material, MIL-53(Al)@CBS, was synthesized via the solvothermal method, involving the growth of MIL-53(Al) crystals on cocoa bean shell residues (CBS). Physicochemical characterization techniques, including TGA, BET, FTIR, XRD, and SEM, confirmed successful hybridization. MIL-53(Al)@CBS was employed as an adsorbent for antibiotics (oxytetracycline, tetracycline, chlortetracycline) separation from aqueous solutions. Parameters like pH, adsorbent dose, concentration, time, and temperature were systematically evaluated. FTIR revealed π-π interactions and hydrogen bonds between tetracyclines and the adsorbent. MIL-53(Al)@CBS exhibited adsorption, with removal rates up to 98.92%, 99.04%, and 98.24% for OTC, TC, and CTC, respectively. Kinetics suggested adsorption depends on active site availability, with TC adsorbing fastest. Microscopic models showed adsorption on three distinct active site types with different affinities without competition or adherence to the Langmuir hypothesis. Importantly, MIL-53(Al)@CBS maintained high adsorption capacity even after ten washing cycles, highlighting its potential for water treatment.

Adsorption of tetracycline on polyvinyl chloride microplastics in aqueous environments

Microplastics (MPs), as carriers of organic pollutants in the environment, have become a growing public concern in recent years. Tetracycline (TTC) is an antibiotic that can be absorbed by MPs and have a harmful effect on human health. Therefore, this study was conducted with the aim of investigating the adsorption rate of TTC onto polyvinyl chloride (PVC) MPs. In addition, the adsorption mechanism of this process was studied using isothermal, kinetic, and thermodynamic models. For this purpose, experimental runs using the Box-Behnken model were designed to investigate the main research parameters, including PVC dose (0.5-2 g/L), reaction time (5-55 min), initial antibiotic concentration (5-15 mg/L), and pH (4-10). Based on the research findings, the highest TTC adsorption rate (93.23%) was obtained at a pH of 10, a contact time of 55 min, an adsorbent dose of 1.25 g/L, and an antibiotic concentration of 10 mg/L. The study found that the adsorption rate of TTC followed the pseudo-second-order and Langmuir models. Thermodynamic data indicated that the process was spontaneous, exothermic, and physical. Increasing ion concentration decreased TTC adsorption, and distilled water had the highest adsorption, while municipal wastewater had the lowest adsorption. These findings provide valuable insights into the behavior of MPs and organic pollutants, underscoring the importance of conducting additional research and implementing measures to mitigate their detrimental effects on human health and the environment.

A study on the performance of a novel adsorbent UiO-66 modified by a nickel on removing tetracycline in wastewater

In the present study, Ni-UiO-66 was synthesized to improve the adsorption efficiency of tetracycline (TC) in wastewater treatment. To this end, nickel doping was performed in the preparation process of UiO-66. The synthesized Ni-UiO-66 was characterized by XRD, SEM and EDS, BET, FTIR, TGA, and XPS for obtaining the lattice structure, surface topography, specific surface area, surface functional groups, and thermostability. More specifically, Ni-UiO-66 has a removal efficiency and adsorption capacity of up to 90% and 120 mg g-1, respectively, when used to treat TC. The presence of ions HCO3-, SO42-, NO3- and PO43- slightly affects the TC adsorption. A 20 mg L-1 humic acid reduces the removal efficiency from 80% to 60%. The performed analyses revealed that Ni-UiO-66 had similar adsorption capacity in wastewater with different ion strengths. The variation of adsorption capacity with the adsorption time was fitted using a pseudo-second-order kinetic equation. Meanwhile, it is found that the adsorption reaction occurs only on the monolayer of the UiO-66 surface so the adsorption process can be simulated using the Langmuir isotherm model. The thermodynamic analysis indicates that the adsorption of TC is an endothermic reaction. Electrostatic attraction, hydrogen-bond interaction, and π-π interaction might be the main reasons for the adsorption. The synthesized Ni-UiO-66 has well adsorption capacity and stable structure. Accordingly, it is expected to achieve a good prospect in industrial applications and wastewater treatment plants.

Parametric study and process modeling for metronidazole removal by rhombic dodecahedron ZIF-67 crystals

Metronidazole (MNZ) is an extensively used antibiotic against bacterial infections for humans and farm animals. Prevention of antibiotics discharge is essential to prevent adverse environmental and health impacts. A member of metal-organic frameworks, zeolite imidazole framework-67 with cobalt sulfate precursor (ZIF-67-SO4) and exceptional physio-chemical properties was prepared via room temperature precipitation to adsorb MNZ. The study framework was designed by Box-Behnken Design to evaluate the effect of pH, ZIF-67-SO4 dose, and contact time on adsorption efficiency. The polynomial model fitted the adsorption system indicated the optimal condition for 97% MNZ removal occurs at pH = 7, adsorbent dosage = 1 g/L, and mixing time = 60 min. The model also revealed that the removal increased with contact time and decreased at strong pH. Equilibrium and kinetic study also indicated the adsorption of MNZ followed the intra-particle diffusion model and the Langmuir isotherm model with a qmax = 63.03 mg/g. The insignificant loss in removal efficacy in use-reuse adsorption cycles reflected the practical viability of ZIF-67-SO4.

A dual purpose aluminum-based metal organic framework for the removal of chloramphenicol from wastewater

The presence of antibiotics in the aquatic environment can cause significant environmental and human health problems even at trace concentrations. Conventional treatment systems alone are ineffective in removing these resistant antibiotics. To address this problem, oxidation and adsorption techniques were used to explore the removal of recalcitrant antibiotic chloramphenicol (CAP). An aluminum-based metal-organic framework (Al-MIL) with high surface area and extended porosity, was prepared and used both as adsorbent and catalyst for the oxidation of CAP. Characterization of the Al-MIL revealed a large surface area of 1137 m² g^-1, a homogeneous microporous structure, good crystallinity, and particle size in the range of 200-400 nm. Adsorption of CAP on Al-MIL achieved equilibrium after 1 h, reaching a maximum adsorption capacity of 96.1 mg g^-1 at the optimum pH value of 5.3. The combination of adsorption and oxidation did not improve the % TOC reduction considerably, indicating an antagonistic rather than synergistic effect between the two processes. Oxidation alone in the presence of persulfate, achieved a % TOC reduction of 71% after 2 h, compared to 56% achieved by adsorption alone at the same duration. The optimum persulfate concentration was determined as 2.5 mM. The Al-MIL structure did not demonstrate any substantial deterioriation after six repeated runs, according to the reusability experiments.

Fabrication of HKUST-1/ZnO/SA nanocomposite for Doxycycline and Naproxen adsorption from contaminated water

Doxycycline and Naproxen are among the most widely used drugs in the therapy of CoVID 19 disease found in surface water. Water scarcity in recent years has led to research to treat polluted water. One of the easy and low-cost methods for treatment is adsorption. The utilize of Metal-Organic Frameworks (MOFs) to evacuate pharmaceutical contaminants from water sources has been considered by researchers in the last decade. In this research, HKUST-1/ZnO/SA composite with high adsorption capacity, chemical and water stability, recovery, and reuse properties has been synthesized and investigated. By adding 10 wt% of ZnO and 50 wt% of sodium alginate to HKUST-1, at 25 °C and pH = 7, the specific surface area is reduced by 60%. The parameters of drugs concentration C₀ =(5,80) mg/L, time=(15,240) min, and pH= (2,12) were investigated, and the results showed that the HKUST-1/ZnO/SA is stable in water for 14 days and it can be used in 10 cycles with 80% removal efficiency. The maximum Adsorption loading of doxycycline and Naproxen upon HKUST-1/ZnO/SA is 97.58 and 80.04 mg/g, respectively. Based on the correlation coefficient (R²), the pseudo-second-order and the Langmuir isotherm models were selected for drug adsorption. The proposed mechanism of drug uptake is by MOFs, hydrogen bonding, electrostatic bonding, and acid-base interaction.

Reducing the negative impact of ceftriaxone and doxycycline in aqueous solutions using ferrihydrite/plant-based composites: mechanism pathway

The adsorption of ceftriaxone (CET) and doxycycline (DOX) from aqueous solution using ferrihydrite/plant-based composites (silica rice husk) to reduce their negative impact on the ecosystem was adequately studied. On the other hand, phosphate and humic acid are often found in water and soil; in view of this, their effects on the adsorption of CET and DOX were investigated. The results showed that the removal of ceftriaxone decreased with an increase in pH, while that of doxycycline did not. Ferrihydrite with 10% silica rice husk (Fh-10%SRH) has the highest maximum adsorption capacity of 139 and 178 mg g^-1 for CET and DOX, respectively, at room temperature based on Liu's adsorption isotherm. This implies that the presence of silica rice husk increases CET and DOX uptake due to an increase in the pore volume of FH-10%SRH. The results showed that phosphate had a significant inhibition role on CET adsorption and minor on DOX, whereas humic acid salt affected neither case. Increase in temperature up to 333 K favored the adsorption of both contaminants. The proposed adsorption mechanisms of ceftriaxone are electrostatic interaction, n-π interaction, and hydrogen bond, while that of DOX entails n-π interaction and hydrogen bond.

Critical review on adsorptive removal of antibiotics: Present situation, challenges and future perspective

This review gives a proper dedicated understanding of the contamination level, sources, and biological dangers related with different classes of antibiotics in consumable water. The literature on the adsorption of antibiotics is relatively uncommon and developments are still under progression, especially for adsorbents other than activated carbon. Also, adsorption technique has already been applied vastly for water treatment. Notwithstanding significant progressions, designed natural wastewater treatment frameworks are just bearably effective (48-77%) in the expulsion of antibiotics. Hence, the compilation of available literature especially for antibiotic adsorption was much needed. Moreover, the conventional adsorbents have some limitations of their own. In this study, the main focus was laid on unconventional adsorbents such as Biochar, Biopolymers, Carbon Nanotubes, Clays, Metal-Organic Frameworks, Microalgae and some miscellaneous adsorbents. The mechanism of adsorption by the unconventional adsorbents includes electrostatic interactions, π-π bonding, weak Van der Waal forces, H-bonding and surface complexation, which was similar to that of conventional adsorbents and hence these unconventional adsorbents can easily replace the costlier conventional adsorbents with even better adsorption efficiency. This paper also briefly discussed the thermodynamics, adsorption equilibrium; isotherm and kinetics of adsorption. This review paper seizes the critical advances of adsorption phenomenon at various interfaces and lays the foundation for current scenario associated with further progress. Besides, this study would help in understanding the antibiotic adsorption, cost estimation and future goals that will attract the young the researchers of this field.

Reusable Ratiometric Fluorescent Probe for Detection and Removal of Doxycycline Antibiotic Demonstrated by Environmental Samples Investigations

Tetracycline antibiotics residue has attracted worldwide attention due to its serious damage to human health and environment. Herein, by taking the advantage of unique properties of zeolitic imidazolate framework (ZIF),...

Impact of Zr6 Node in a Metal-Organic Framework for Adsorptive Removal of Antibiotics from Water

Quinolone-based antibiotics commonly detected in surface, ground, and drinking water are difficult to remove and therefore pose a threat as organic contaminants of aqueous environment. We performed adsorptive removal of quinolone antibiotics, nalidixic acid and ofloxacin, using a zirconium-porphyrin-based metal-organic framework (MOF), PCN-224. PCN-224 exhibits the highest adsorption capacities for both nalidixic acid and ofloxacin among those reported for MOFs to date. The accessible metal sites of Zr metal nodes are responsible for efficient adsorptive removal. This study offers a pragmatic approach to design MOFs optimized for adsorptive removal of antibiotics.