Applications of Pulsed Light Decontamination Technology in Food Processing: An Overview

Characterization and subcellular localization of selenium in Limosilactobacillus fermentum Ln-9 obtained by intense pulsed light-ultraviolet combined mutagenesis

Lactic acid bacteria (LAB) can convert inorganic selenium (Se) to organic Se and elemental forms with low toxicity and high bioavailability, but a comprehensive Se analysis of Se-enriched LAB is lacking. In this study, Limosilactobacillus fermentum Ln-9 was obtained by intense pulsed light-ultraviolet combined mutagenesis, and its characteristics and subcellular localization of Se were analyzed. The results displayed that Ln-9 accumulated 3.03 times Se that of the original strain. Under optimal fermentation conditions, the total Se content of Se-enriched Ln-9 (SeLn-9) reached 12.16 mg/g with 96.34% contained in Se nanoparticles (SeNPs), which was much higher than that of organic macromolecules. Furthermore, SeNPs were mainly localized outside the cell, Se-proteins were in the membrane and cytoplasmic fractions, and Se-polysaccharides were in the membrane fraction. Besides, SeLn-9 maintained a good morphology and gastrointestinal tolerance and had an enhanced antioxidant capacity. These findings make Ln-9 promising for applications in the food industry.

Electromagnetic wave-based technology for ready-to-eat foods preservation: a review of applications, challenges and prospects

In recent years, the ready-to-eat foods market has grown significantly due to its high nutritional value and convenience. However, these foods are also at risk of microbial contamination, which poses food safety hazards. Additionally, traditional high-temperature sterilization methods can cause food safety and nutritional health problems such as protein denaturation and lipid oxidation. Therefore, exploring and developing effective sterilization technologies is imperative to ensure food safety and nutritional properties, and protect consumers from potential foodborne diseases. This paper focuses on electromagnetic wave-based pasteurization technologies, including thermal processing technologies such as microwave, radio frequency, and infrared, as well as non-thermal processing technologies like ultraviolet, irradiation, pulsed light, and photodynamic inactivation. Furthermore, it also reviews the antibacterial mechanisms, advantages, disadvantages, and recent applications of these technologies in ready-to-eat foods, and summarizes their limitations and prospects. By comparing the limitations of traditional high-temperature sterilization methods, this paper highlights the significant advantages of these pasteurization techniques in effectively inhibiting microbial growth, slowing lipid oxidation, and preserving food nutrition and flavor. This review may contribute to the industrial application and process optimization of these pasteurization technologies, providing an optimal choice for preserving various types of ready-to-eat foods.

Effect of dehydration and pulsed light treatment on decontamination of minced onions: Microbial safety and physicochemical properties

Microbial contamination of dehydrated onion products is a challenge to the industry. The study focused on opting for a suitable drying condition for minced onion and exploring the decontamination efficacy of pulsed light (PL) treatment conditions for the dehydrated product. The minced onions were hot air dried at 55-75°C for 280 min. The drying condition selected was 195 min at 75°C with a final water activity of 0.5 and moisture content of 7% (wet basis [w.b.]). The weight losses, browning indexes (BI), shrinkage volumes (%), and thiosulfinate content were considered. The dehydrated product was exposed to PL treatment corresponding to an effective fluence range of 0.007-0.731 J/cm2. A fluence of 0.444 J/cm2 (1.8 kV for 150 s) achieved 5.00, 3.14, 2.96, and 2.98 log reduction in total plate count, yeast and mold count, Bacillus cereus 10876, and Escherichia coli ATCC 43888, respectively. The PL-treated sample (0.444 J/cm2) produced a microbially safe product with no significant difference in the moisture contents (%w.b.) and water activity (aw) from the untreated dehydrated sample. Further, a 30.9% increase in the BI and a 4.25% depletion in thiosulfinate content were observed after PL treatment. An optimum drying combination (75°C for 195 min) of minced onion followed by decontamination using pulsed light treatment at 0.444 J/cm2 fluence satisfies the microbial safety and quality. PRACTICAL APPLICATION: Dehydrated minced onion can be used for dishes requiring low water content and short cooking time. It is helpful during shortages, high price fluctuations, and famines.

Nonthermal Sterilization of Animal-based Foods by Intense Pulsed Light Treatment

The consumption of meat has been increasing, leading to a dynamic meat and meat processing industry. To maintain the quality and safety of meat products, various technologies have been explored, including intense pulsed light (IPL) technology. Several factors affect the inactivation of microorganisms by IPL treatment, including light intensity (fluence), treatment duration, pulse frequency, and the distance between the lamp and the samples. Meat products have been studied for IPL treatment, resulting in microbial reductions of approximately 0.4-2.4 Log. There are also impacts on color, sensory attributes, and physico-chemical quality, depending on treatment conditions. Processed meat products like sausages and ham have shown microbial reductions of around 0.1-4 Log with IPL treatment. IPL treatment has minimal impact on color and lipid oxidation in these products. Egg products and dairy items can also benefit from IPL treatment, achieving microbial reductions of around 1-7.8 Log. The effect on product quality varies depending on the treatment conditions. IPL technology has shown promise in enhancing the safety and quality of various food products, including meat, processed meat, egg products, and dairy items. However, the research results on animal-based food are not diverse and fragmentary, this study discusses the future research direction and industrial application through a review of these researches.

Radical species generating technologies for decontamination of Listeria species in food: a recent review report

Foodborne illnesses occur due to the contamination of fresh, frozen, or processed food products by some pathogens. Among several pathogens responsible for the illnesses, Listeria monocytogenes is one of the lethal bacteria that endangers public health. Several preexisting and novel technologies, especially non-thermal technologies are being studied for their antimicrobial effects, particularly toward L. monocytogenes. Some noteworthy emerging technologies include ultraviolet (UV) or light-emitting diode (LED), pulsed light, cold plasma, and ozonation. These technologies are gaining popularity since no heat is employed and undesirable deterioration of food quality, especially texture, and taste is devoided. This review aims to summarize the most recent advances in non-thermal processing technologies and their effect on inactivating L. monocytogenes in food products and on sanitizing packaging materials. These technologies use varying mechanisms, such as photoinactivation, photosensitization, disruption of bacterial membrane and cytoplasm, etc. This review can help food processing industries select the appropriate processing techniques for optimal benefits, in which the structural integrity of food can be preserved while simultaneously destroying L. monocytogenes present in foods. To eliminate Listeria spp., different technologies possess varying mechanisms such as rupturing the cell wall, formation of pyrimidine dimers in the DNA through photochemical effect, excitation of endogenous porphyrins by photosensitizers, generating reactive species, causing leakage of cellular contents and oxidizing proteins and lipids. These technologies provide an alternative to heat-based sterilization technologies and further development is still required to minimize the drawbacks associated with some technologies.

Effectiveness of Ultra-High Irradiance Blue-Light-Emitting Diodes to Control Salmonella Contamination Adhered to Dry Stainless Steel Surfaces

Controlling Salmonella contamination in dry food processing environments represents a significant challenge due to their tolerance to desiccation stress and enhanced thermal resistance. Blue light is emerging as a safer alternative to UV irradiation for surface decontamination. In the present study, the antimicrobial efficacy of ultra-high irradiance (UHI) blue light, generated by light-emitting diodes (LEDs) at wavelengths of 405 nm (841.6 mW/cm2) and 460 nm (614.9 mW/cm2), was evaluated against a five-serovar cocktail of Salmonella enterica dry cells on clean and soiled stainless steel (SS) surfaces. Inoculated coupons were subjected to blue light irradiation treatments at equivalent energy doses ranging from 221 to 1106 J/cm2. Wheat flour was used as a model food soil system. To determine the bactericidal mechanisms of blue light, the intracellular concentration of reactive oxygen species (ROS) in Salmonella cells and the temperature changes on SS surfaces were also measured. The treatment energy dose had a significant effect on Salmonella inactivation levels. On clean SS surfaces, the reduction in Salmonella counts ranged from 0.8 to 7.4 log CFU/cm2, while, on soiled coupons, the inactivation levels varied from 1.2 to 4.2 log CFU/cm2. Blue LED treatments triggered a significant generation of ROS within Salmonella cells, as well as a substantial temperature increase in SS surfaces. However, in the presence of organic matter, the oxidative stress in Salmonella cells declined significantly, and treatments with higher energy doses (>700 J/cm2) were required to uphold the antimicrobial effectiveness observed on clean SS. The mechanism of the bactericidal effect of UHI blue LED treatments is likely to be a combination of photothermal and photochemical effects. These results indicate that LEDs emitting UHI blue light could represent a novel cost- and time-effective alternative for controlling microbial contamination in dry food processing environments.

Emerging technologies in seafood processing: An overview of innovations reshaping the aquatic food industry

Seafood processing has traditionally been challenging due to the rapid spoilage rates and quality degradation of these products. With the rise of food science and technology, novel methods are being developed to overcome these challenges and improve seafood quality, shelf life, and safety. These methods range from high-pressure processing (HPP) to edible coatings, and their exploration and application in seafood processing are of great importance. This review synthesizes the recent advancements in various emerging technologies used in the seafood industry and critically evaluates their efficacy, challenges, and potential benefits. The technologies covered include HPP, ultrasound, pulsed electric field, plasma technologies, pulsed light, low-voltage electrostatic field, ozone, vacuum cooking, purified condensed smoke, microwave heating, and edible coating. Each technology offers unique advantages and presents specific challenges; however, their successful application largely depends on the nature of the seafood product and the desired result. HPP and microwave heating show exceptional promise in terms of quality retention and shelf-life extension. Edible coatings present a multifunctional approach, offering preservation and the potential enhancement of nutritional value. The strength, weakness, opportunity, and threat (SWOT) analysis indicates that, despite the potential of these technologies, cost-effectiveness, scalability, regulatory considerations, and consumer acceptance remain crucial issues. As the seafood industry stands on the cusp of a technological revolution, understanding these nuances becomes imperative for sustainable growth. Future research should focus on technological refinements, understanding consumer perspectives, and developing regulatory frameworks to facilitate the adoption of these technologies in the seafood industry.

Effects of multi-frequency ultrasonic assisted sodium hypochlorite on the cleaning effect and quality of fresh-cut scallion stems

This study aimed to evaluate the feasibility of multi-frequency ultrasound-assisted sodium hypochlorite (NaClO) on fresh-cut scallion stem (FCS) cleaning. Ultrasonic cleaning parameters (frequency mode, frequency amplitude, and the sample to water ratios) were optimized against cleanliness and microbial biomass as evaluation indexes. Under the optimum conditions, the free chlorine residues and quality attributes of FCS were also investigated. The results showed that the cleanliness of FCS improved significantly (p < 0.05) and the total number of microorganisms, especially Escherichia coli, decreased dramatically under the optimized cleaning condition with the simultaneous ultrasound (US) at the sweep frequency (SF) combination of 20 + 28 kHz, the ultrasonic density of 60 W/L, pulse time of 10 s, which indicated that the shelf life of FCS would be extended. Compared to FCS after the 250 ppm NaClO cleaning, the retention of ascorbic acid (AA), color, and texture structure of FCS had no significant difference after ultrasound-assisted NaClO treatment. Meanwhile, the content of allicin increased by 52.5% under ultrasound-assisted cleaning. The integration of US into the cleaning process resulted in a notably reduction of 68% in NaClO concentration, as well as the weight loss and respiration rate (RR) of the scallion stems. Therefore, ultrasound-assisted NaClO cleaning was regarded as a promising and effective approach for cleaning fresh-cut vegetables.

Effect of pulsed light on curcumin chemical stability and antioxidant capacity

Curcumin is the major bioactive component in turmeric with potent antioxidant activity. Little is known about how pulsed light (PL) technology (an emerging non-thermal food processing technology relying on high intensity short duration flashes of light) can affect the chemical stability and antioxidant capacity of curcumin. This study found that PL treatment of fluence levels from 0 to 12.75 J/cm2 produced a fluence-dependent reduction in curcumin content. These results paralleled the production of a tentative curcumin dimer, identified as a potential photochemical transformation product. PL-treated curcumin at relatively higher fluence levels decreased chemical-based ORAC and ABTS antioxidant capacity, relative to control (P < 0.05). This contrasted the effect observed to increase coincidently both intracellular antioxidant capacity (e.g., DCFH-DA (P < 0.05)) and GSH/GSSG ratio (P < 0.05), respectively, in cultured differentiated Caco-2 cells. In conclusion, the application of PL on curcumin results in photochemical transformation reactions, such as dimerization, which in turn, can enhance biological antioxidant capacity in differentiated Caco-2 cells.

Effectiveness of Ultra-High Irradiance Blue Light-Emitting Diodes in Inactivating Escherichia coli O157:H7 on Dry Stainless Steel and Cast-Iron Surfaces

The use of blue light-emitting diodes (LEDs) is emerging as a promising dry decontamination method. In the present study, LEDs emitting ultra-high irradiance (UHI) density at 405 nm (842 mW/cm2) and 460 nm (615 mW/cm2) were used to deliver high-intensity photoinactivation treatments ranging from 221 to 1107 J/cm2. The efficacy of these treatments to inactivate E. coli O157:H7 dry cells was evaluated on clean and soiled stainless steel and cast-iron surfaces. On clean metal surfaces, the 405 and 460 nm LED treatment with a 221 J/cm2 dose resulted in E. coli reductions ranging from 2.0 to 4.1 log CFU/cm2. Increasing the treatment energy dose to 665 J/cm2 caused further significant reductions (>8 log CFU/cm2) in the E. coli population. LED treatments triggered a significant production of intracellular reactive oxygen species (ROS) in E. coli cells, as well as a significant temperature increase on metal surfaces. In the presence of organic matter, intracellular ROS generation in E. coli cells dropped significantly, and treatments with higher energy doses (>700 J/cm2) were required to uphold antimicrobial effectiveness. The mechanism of the bactericidal effect of UHI blue LED treatments is likely to be a combination of photothermal and photochemical effects. This study showed that LEDs emitting monochromatic blue light at UHI levels may serve as a viable and time-effective method for surface decontamination in dry food processing environments.

Ultraviolet C irradiation: A promising approach for the disinfection of public spaces?

Ultraviolet irradiation C (UVC) has emerged as an effective strategy for microbial control in indoor public spaces. UVC is commonly applied for air, surface, and water disinfection. Unlike common 254 nm UVC, far-UVC at 222 nm is considered non-harmful to human health, being safe for occupied spaces, and still effective for disinfection purposes. Therefore, and allied to the urgency to mitigate the current pandemic of SARS-CoV-2, an increase in UVC-based technology devices appeared in the market with levels of pathogens reduction higher than 99.9 %. This environmentally friendly technology has the potential to overcome many of the limitations of traditional chemical-based disinfection approaches. The novel UVC-based devices were thought to be used in public indoor spaces such as hospitals, schools, and public transport to minimize the risk of pathogens contamination and propagation, saving costs by reducing manual cleaning and equipment maintenance provided by manpower. However, a lack of information about UVC-based parameters and protocols for disinfection, and controversies regarding health and environmental risks still exist. In this review, fundamentals on UVC disinfection are presented. Furthermore, a deep analysis of UVC-based technologies available in the market for the disinfection of public spaces is addressed, as well as their advantages and limitations. This comprehensive analysis provides valuable inputs and strategies for the development of effective, reliable, and safe UVC disinfection systems.

New preservation and detection technologies for edible mushrooms: A review

Edible mushrooms are nutritious, tasty, and have medicinal value, which makes them very popular. Fresh mushrooms have a high water content and a crisp texture. They demonstrate strong metabolic activity after harvesting. However, they are prone to textural changes, microbial infestation, and nutritional and flavor loss, and they therefore require appropriate post-harvest processing and preservation. Important factors affecting safety and quality during their processing and storage include their quality, source, microbial contamination, physical damage, and chemical residues. Thus, these aspects should be tested carefully to ensure safety. In recent years, many new techniques have been used to preserve mushrooms, including electrofluidic drying and cold plasma treatment, as well as new packaging and coating technologies. In terms of detection, many new detection techniques, such as nuclear magnetic resonance (NMR), imaging technology, and spectroscopy can be used as rapid and effective means of detection. This paper reviews the new technological methods for processing and detecting the quality of mainstream edible mushrooms. It mainly introduces their working principles and application, and highlights the future direction of preservation, processing, and quality detection technologies for edible mushrooms. Adopting appropriate post-harvest processing and preservation techniques can maintain the organoleptic properties, nutrition, and flavor of mushrooms effectively. The use of rapid, accurate, and non-destructive testing methods can provide a strong assurance of food safety. At present, these new processing, preservation and testing methods have achieved good results but at the same time there are certain shortcomings. So it is recommended that they also be continuously researched and improved, for example through the use of new technologies and combinations of different technologies. © 2023 Society of Chemical Industry.

Effect of UV Filters during the Application of Pulsed Light to Reduce Lactobacillus brevis Contamination and 3-Methylbut-2-ene-1-thiol Formation While Preserving the Physicochemical Attributes of Blonde Ale and Centennial Red Ale Beers

Pulsed light (PL) is a novel, non-thermal technology being used to control the microbial spoilage of foods and beverages. Adverse sensory changes, commonly characterized as "lightstruck", can occur in beers when exposed to the UV portion of PL due to the formation of 3-methylbut-2-ene-1-thiol (3-MBT) upon the photodegradation of iso-α-acids. This study is the first to investigate the effect of different portions of the PL spectrum on UV-sensitive beers (light-colored blonde ale and dark-colored centennial red ale) using clear and bronze-tinted UV filters. PL treatments with its entire spectrum, including the ultraviolet portion of the spectrum, resulted in up to 4.2 and 2.4 log reductions of L. brevis in the blonde ale and centennial red ale beers, respectively, but also resulted in the formation of 3-MBT and small but significant changes in physicochemical properties including color, bitterness, pH, and total soluble solids. The application of UV filters effectively maintained 3-MBT below the limit of quantification but significantly reduced microbial deactivation to 1.2 and 1.0 log reductions of L. brevis at 8.9 J/cm² fluence with a clear filter. Further optimization of the filter wavelengths is considered necessary to fully apply PL for beer processing and possibly other light-sensitive foods and beverages.

Comparison of microbial reduction effect of intense pulsed light according to growth stage and population density of Escherichia coli ATCC 25922 using a double Weibull model

This study evaluated how the efficacy of intense pulsed light (IPL) was influenced by biological factors such as the incubation time and the population of Escherichia coli. According to the 4D value, the microorganisms in the exponential phase were more susceptible to IPL (0.51 J/cm²), while those in the stationary phase were the most resistant (0.67 J/cm²). The microorganisms in the exponential phase could have more critical DNA damage. In addition, the degree of inactivation was affected by the microbial population. When the population was 10⁹ CFU/ml, a maximum 3.4-log reduction was observed after applying IPL at 12.5 J/cm². In contrast, a population with a density of 10¹⁰ CFU/ml showed maximally 0.13-log reduction when IPL was applied at 18.7 J/cm². This large difference might have been due to cell distribution and aggregation. The study is expected to contribute to the analytical confirmation of the microbial reduction mechanism through non-thermal technologies.

Dry surface biofilms in the food processing industry: An overview on surface characteristics, adhesion and biofilm formation, detection of biofilms, and dry sanitization methods

Bacterial biofilm formation in low moisture food processing (LMF) plants is related to matters of food safety, production efficiency, economic loss, and reduced consumer trust. Dry surfaces may appear dry to the naked eye, however, it is common to find a coverage of thin liquid films and microdroplets, known as microscopic surface wetness (MSW). The MSW may favor dry surface biofilm (DSB) formation. DSB formation is similar in other industries, it occurs through the processes of adhesion, production of extracellular polymeric substances, development of microcolonies and maturation, it is mediated by a quorum sensing (QS) system and is followed by dispersal, leading to disaggregation. Species that survive on dry surfaces develop tolerance to different stresses. DSB are recalcitrant and contribute to higher resistance to sanitation, becoming potential sources of contamination, related to the spoilage of processed products and foodborne disease outbreaks. In LMF industries, sanitization is performed using physical methods without the presence of water. Although alternative dry sanitizing methods can be efficiently used, additional studies are still required to develop and assess the effect of emerging technologies, and to propose possible combinations with traditional methods to enhance their effects on the sanitization process. Overall, more information about the different technologies can help to find the most appropriate method/s, contributing to the development of new sanitization protocols. Thus, this review aimed to identify the main characteristics and challenges of biofilm management in low moisture food industries, and summarizes the mechanisms of action of different dry sanitizing methods (alcohol, hot air, UV-C light, pulsed light, gaseous ozone, and cold plasma) and their effects on microbial metabolism.

Continuous and Pulsed Ultraviolet-C LED on Germicidal Effect and Energy Consumption in Fresh Products: Applications in Tomatoes as a Model

Nowadays, lifestyle change is one of the problems of the new world economic order, and the procedures of feeding, purchasing, preparation, and the storage of food products, are forcing authorities to establish more rigorous methods concerning the control of food quality and safety. Owing quality in the agro-food sector is a complex and global issue, due to the distance between production and final consumption, as well as the new demands of society on food. Contributing to the bacteria minimization during their path in the supply chain, the objective of this research is the use of an UV-C LED artificial lighting system with emission in continuous light (CL) and two of pulsed light (Mode 1 and Mode 2) for fresh products' disinfection. A mathematical model is introduced as a reference to establish the equivalence dose of continuous and pulsed UV-C LED irradiation. The doses applied were 5, 15, and 25 mJ cm^-². The configured parameters per each technique were the irradiance, time also the frequency (500 Hz), and duty cycle (30, 50, and 80%) for Mode 1 and Mode 2. The germicidal effect (GE), energy consumption, and effective germicidal effect (EGE), were evaluated for the different techniques. According to the results, the technique Mode 1 was the best in the GE with 1.06 ± 0.01 and 1.08 ± 0.01 Log reduction by 25 mJ cm^-2 at 30 and 80% duty cycle, correspondingly. The CL and Mode 1 showed an outstanding performance with the EGE. Finally, Mode 1 reduced 11% in energy and the GE is comparable with CL. The pulsed light technique Mode 1 constitutes a powerful method against the microorganism's destruction and a strategy for saving energy during the treatment. The UV-C LEDs proved to be an excellent alternative in the disinfection of fresh products with pulsed light emission in the real process.

Advances in prepared dish processing using efficient physical fields: A review

Prepared dishes are increasingly popular convenience food that can be eaten directly from hygienic packaging by heating. Physics field (PF) is food processing method built with physical processing technology, which has the characteristics of high efficiency and environmental safety. This review focuses on summarizing the application of PFs in prepared dishes, evaluating and comparing PFs through quality changes during processing and storage of prepared dishes. Currently, improving the quality and extending the shelf life of prepared dishes through thermal and non-thermal processing are the main modes of action of PFs. Most PFs show good potential in handing prepared dishes, but may also react poorly to some prepared dishes. In addition, the difficulty of precise control of processing conditions has led to research mostly at the laboratory stage, but as physical technology continues to break through, more PFs and multi-physical field will be promoted for commercial use in the future. This review contributes to a deeper understanding of the effect of PFs on prepared dishes, and provides theoretical reference and practical basis for future processing research in the development of various enhanced PFs.

The propensity of fomite spread of SARS-CoV-2 virus through produce supply chain

Background

The global community has battled the spread of SAR-CoV-2 for almost 2 years, and the projection is that the virus may be recurrent like the seasonal flu. The SARS-CoV-2 pandemic disrupted activities within the food supply chain that cost billions of dollars globally. This has heightened concerns about fomite spread of the virus through surfaces. There is an urgent need to understand the risk portends by this virus along the produce supply chain with conditions (low temperature and high relative humidity) conducive to extended survival of the virus.

Main body

Pre-dating SARS-CoV-2 are other types of coronaviruses that had lower infection and mortality rates. There are some similarities between the former and the new coronavirus, especially with regards to transmission modes and their survivability on surfaces. There is evidence of other coronaviruses' survival on surfaces for weeks. Currently, there are limited evidence-based studies to enlighten us on how the virus is transmitted within the produce supply chain. A few studies claim that the virus could spread through the cold supply chains. However, these are not sufficient to make a conclusive inference about the deadly SARS-CoV-2.

Conclusions

This paper provides a succinct review of the literature on current understanding of the transmission, survivability, and risk SARS-CoV-2 portend to humans within the produce supply chain and calls for more evidence-based research to allay or alert us of the potential risk of fomite transmission of SARS-CoV-2. The paper also highlights examples of conventional and novel non-thermal inactivation and sanitation methods applicable to this type of virus.

UVC radiation intensity dependence of pathogen decontamination rate: semiclassical theory and experiment

A semiclassical (light classical and molecule quantum) model describing the dependence of DNA/RNA dimerization rate as function of the ultraviolet C (UVC) radiation's intensity is proposed. Particularly, a nonlinear model is developed based on the Raman-like processes in quantum optics. The main result of the theory shows that the process of dimerization in the DNA/RNA depends strongly on the UVC light's intensity, thus proving a possible quantum microscopical mechanism of the interaction of UV light with the DNA. To corroborate the theoretical findings, we realize some experiments, by which want to investigate how the inactivation rate of the yeast colonies depends on the intensity of the UVC irradiation. The experimental results evidence a nonlinear decreasing of the residual yeast colonies as a function of the intensity in the irradiation process. The possibilities to optimize the intensity of UVC radiation in the considered decontamination equipment by using metamaterials are studied. The application of such equipment in disinfection of fluids (air, water, droplets, etc.), as well for the SARS-CoV-2-infected aerosols, is discussed.

Lifestyle of Listeria monocytogenes and food safety: Emerging listericidal technologies in the food industry

Listeria monocytogenes, a causative agent of listeriosis, is a major foodborne pathogen. Among pathogens, L. monocytogenes stands out for its unique ecological and physiological characteristics. This distinct lifestyle of L. monocytogenes has a significant impact on food safety and public health, mainly through the ability of this pathogen to multiply at refrigeration temperature and to persist in the food processing environment. Due to a combination of these characteristics and emerging trends in consumer preference for ready-to-eat and minimally processed food, there is a need to develop effective and sustainable approaches to control contamination of food products with L. monocytogenes. Implementation of an efficient and reliable control strategy for L. monocytogenes must first address the problem of cross-contamination. Besides the preventive control strategies, cross-contamination may be addressed with the introduction of emerging post packaging non-thermal or thermal hurdles that can ensure delivery of a listericidal step in a packed product without interfering with the organoleptic characteristics of a food product. This review aims to present the most relevant findings underlying the distinct lifestyle of L. monocytogenes and its impact on food safety. We also discuss emerging food decontamination technologies that can be used to better control L. monocytogenes.

Microwaves, a potential treatment for bacteria: A review

Bacteria have brought great harm to the public, especially after the emergence of multidrug-resistant bacteria. This has rendered traditional antibiotic therapy ineffective. In recent years, hyperthermia has offered new treatments to remove bacteria. Microwaves (MW) are a component of the electromagnetic spectrum and can rapidly heat materials. Taking advantage of this characteristic of MW, related studies have shown that both thermal and non-thermal effects of MW can inactivate various bacteria. Even though the understanding of MW in the field of bacteria is not sufficient for widespread use at present, MW has performed well in dealing with microorganisms and controlling infection. This review will focus on the application of MW in bacteria and discuss the advantages, prospects and challenges of using MW in the bacterial field.

Recent developments for controlling microbial contamination of nuts

In recent years, the consumption of nuts has shown an increasing trend worldwide. Nuts are an essential part of several countries' economies as an excellent source of nutrients and bioactive compounds. They are contaminated by environmental factors, improper harvesting practices, inadequate packaging procedures, improper storage, and transportation. The longer storage time also leads to the greater chances of contamination from pathogenic fungi. Nuts are infected with Aspergillus species, Penicillium species, Escherichia coli, Salmonella, and Listeria monocytogenes. Therefore, nuts are associated with a high risk of pathogens and mycotoxins, which demand the urgency of using techniques for enhancing microbial safety and shelf-life stability. Many techniques such as ozone, cold plasma, irradiation, radiofrequency have been explored for the decontamination of nuts. These techniques have different efficiencies for reducing the contamination depending on processing parameters, type of pathogen, and conditions of food material. This review provides insight into decontamination technologies for reducing microbial contamination from nuts.

Mild processing of seafood-A review

Recent years have shown a tremendous increase in consumer demands for healthy, natural, high-quality convenience foods, especially within the fish and seafood sector. Traditional processing technologies such as drying or extensive heating can cause deterioration of nutrients and sensory quality uncompilable with these demands. This has led to development of many novel processing technologies, which include several mild technologies. The present review highlights the potential of mild thermal, and nonthermal physical, and chemical technologies, either used alone or in combination, to obtain safe seafood products with good shelf life and preference among consumers. Moreover, applications and limitations are discussed to provide a clear view of the potential for future development and applications. Some of the reviewed technologies, or combinations thereof, have shown great potential for non-seafood products, yet data are missing for fish and seafood in general. The present paper visualizes these knowledge gaps and the potential for new technology developments in the seafood sector. Among identified gaps, the combination of mild heating (e.g., sous vide or microwave) with more novel technologies such as pulsed electric field, pulsed light, soluble gas stabilization, cold plasma, or Ohmic heat must be highlighted. However, before industrial applications are available, more research is needed.

Improving the Extraction of Catechins of Green Tea (Camellia sinensis) by Subcritical Water Extraction (SWE) Combined with Pulsed Electric Field (PEF) or Intense Pulsed Light (IPL) Pretreatment

The aim of this study was to find the optimum condition of pulsed electric field (PEF) and intense pulsed light (IPL) for the enhancement of subcritical water extraction (SWE), which is an eco-friendly extraction method, for extracting tea catechins from green tea leaves (Camellia sinensis). The leaves were treated with PEF under conditions of electric field strength (1, 2 and 3 kV/cm) during 60 s. Moreover, IPL was applied at various voltages (800, 1000, and 1200 V) for 60 s. The SWE was performed for 5 min at varying temperatures (110, 130, 150, 170, and 190 °C). The maximum yield of total catechin was 44.35 ± 2.00 mg/g dry green tea leaves at PEF treatment conditions of 2 kV/cm during 60 s, as well as the SWE temperature of 130 °C. In the case of IPL treatment, the largest amount of total catechin was 48.06 ± 5.03 mg/g dry green tea leaves at 800 V during 60 s when the extraction temperature was 130 °C. The total catechin content was increased by 15.43% for PEF and 25.09% for IPL compared to the value of untreated leaves. This study verified that PEF and IPL had a positive effect on the enhancement of tea catechins extraction from green tea leaves using SWE.

Innovative Preservation Methods Improving the Quality and Safety of Fish Products: Beneficial Effects and Limits

Fish products are highly perishable, requiring proper processing to maintain their quality and safety during the entire storage. Different from traditional methods used to extend the shelf-life of these products (smoking, salting, marinating, icing, chilling, freezing, drying, boiling, steaming, etc.), in recent years, some alternative methods have been proposed as innovative processing technologies able to guarantee the extension of their shelf-life while minimally affecting their organoleptic properties. The present review aims to describe the primary mechanisms of some of these innovative methods applied to preserve quality and safety of fish products; namely, non-thermal atmospheric plasma (NTAP), pulsed electric fields (PEF), pulsed light (PL), ultrasounds (US) and electrolyzed water (EW) are analysed, focusing on the main results of the studies published over the last 10 years. The limits and the benefits of each method are addressed in order to provide a global overview about these promising emerging technologies and to facilitate their greater use at industrial level. In general, all the innovative methods analysed in this review have shown a good effectiveness to control microbial growth in fish products maintaining their organoleptic, nutritional and sensory characteristics. Most of the technologies have also shown the great advantage to have a lower energy consumption and shorter production times. In contrast, not all the methods are in the same development stage; thus, we suggest further investigations to develop one (or more) hurdle-like non-thermal method able to meet both food production requirements and the modern consumers' demand.

Acaricidal efficacy of ultraviolet-C irradiation of Tetranychus urticae adults and eggs using a pulsed krypton fluoride excimer laser

BACKGROUND

Pulsed ultraviolet (UV)-C light sources, such as excimer lasers, are used in emerging non-thermal food-decontamination methods and also have high potential for use in a wide range of microbial decontamination applications. The acaricidal effect of an experimental UV-C irradiation device was assessed using female adults and eggs of a model organism, the two-spotted spider mite Tetranychus urticae.

METHODS

UV-C light was generated by a pulsed krypton fluoride excimer laser operating at 248-nm emission wavelength. The pulse energy and pulse repetition rate were 5 mJ and up to 100 Hz, respectively. The distance from the light source to the target was 150 mm; the target surface area was 2.16 cm2. The exposure time for the mites and fresh eggs varied from 1 to 4 min at 5-300 mW, which corresponded to UV doses of 5-80 kJ/m2. Post-irradiation acaricidal effects (mite mortality) were assessed immediately and also measured at 24 h. The effects of UV-C irradiation on the hatchability of eggs were observed daily for up to 12 days post-irradiation.

RESULTS

The mortality of mites at 5 and 40 kJ/m2 was 26% and 92%, respectively. Mite mortality reached 98% at 80 kJ/m2. The effect of exposure duration on mortality was minimal. The effect of irradiation on egg hatchability was even more significant than that on adult mite mortality, i.e. about 100% egg mortality at an accumulated dose of as little as 5 kJ/m2 for each exposure time.

CONCLUSIONS

A high rate of mite mortality and lethal egg damage were observed after less than 1 min of exposure to 5 mJ UV-C pulsed irradiation at 60 Hz. Pending further developments (such as beam steering, beam shaping and miniaturisation) and feasibility studies (such as testing with mites in real-life situations), the reported results and characteristics of the UV-C generator (modulation of energy output and adaptability to varying spot sizes) open up the use of this technology for a vast field of acaricidal applications that require long-range radiation.

Pasteurization of fruit juices by pulsed light treatment: A review on the microbial safety, enzymatic stability, and kinetic approach to process design

Pulsed light (PL) is a polychromatic radiation-based technology, among many other non-thermal processing techniques. The microbiological lethality of the PL technique has been explored in different food matrices along with their associated mechanisms. Pasteurization of fruit juice requires a 5-log cycle reduction in the resistant pathogen in the product. The manufacturers look toward achieving the microbial safety and stability of the juice, while consumers demand high-quality juice. Enzymatic spoilage in fruit juice is also a crucial factor that needs attention. The retailers want the processed juice to be stable, which can be achieved by inactivating the spoilage enzymes and native microflora inside it. The present review argued about the potential of PL technology to produce a microbiologically safe and enzymatically stable fruit juice with a minimal loss in bioactive compounds in the product. Concise information of factors affecting the PL treatment (PLT), primary inactivation mechanism associated with microorganisms, enzymes, the effect of PLT on various quality attributes (microorganisms, spoilage enzymes, bioactive components, sensory properties, color), and shelf life of fruit juices has been put forward. The potential of PL integrated with other non-thermal and mild thermal technologies on the microbial safety and stability of fruit juices has been corroborated. The review also provides suggestions to the readers for designing, modeling, and optimizing the PLT and discusses the use of various primary, secondary kinetic models in detail that have been utilized for different quality parameters in juices. Finally, the challenges and future need associated with PL technology has been summarized.

Impact of factors affecting the efficacy of intense pulsed light for reducing Bacillus subtilis spores

This study investigated how the following four intense pulsed light (IPL) treatment factors affect the inactivation of Bacillus subtilis (KCCM 11,315) spores: distance between the sample and IPL lamp (8, 13, and 18 cm), pulse width (0.5, 1.3, and 2.1 ms), charging voltage (1000, 1200, and 1400 V), and processing time (10, 20, and 30 s). The results showed that all four factors considerably influenced the spore inactivation rate in different ways. Excluding processing time, which does not affect the pulse itself, the effect was largest for pulse width, followed by distance, and charging voltage. The optimal treatment condition that maximized the inactivation rate was a distance of 8 cm, a pulse width of 2.1 ms, a charging voltage of 1000 V, and a processing time of 30 s, which together produced a 6 log reduction. It revealed that individual factors need to be investigated together for achieving the optimal condition of IPL.

Promising strategies to control persistent enemies: Some new technologies to combat biofilm in the food industry-A review

Biofilm is an advanced form of protection that allows bacterial cells to withstand adverse environmental conditions. The complex structure of biofilm results from genetic-related mechanisms besides other factors such as bacterial morphology or substratum properties. Inhibition of biofilm formation of harmful bacteria (spoilage and pathogenic bacteria) is a critical task in the food industry because of the enhanced resistance of biofilm bacteria to stress, such as cleaning and disinfection methods traditionally used in food processing plants, and the increased food safety risks threatening consumer health caused by recurrent contamination and rapid deterioration of food by biofilm cells. Therefore, it is urgent to find methods and strategies for effectively combating bacterial biofilm formation and eradicating mature biofilms. Innovative and promising approaches to control bacteria and their biofilms are emerging. These new approaches range from methods based on natural ingredients to the use of nanoparticles. This literature review aims to describe the efficacy of these strategies and provide an overview of recent promising biofilm control technologies in the food processing sector.

Effect of nonthermal treatments on selected natural food pigments and color changes in plant material

In recent years, traditional high-temperature food processing is continuously being replaced by nonthermal processes. Nonthermal processes have a positive effect on food quality, including color and maintaining natural food pigments. Thus, this article describes the influence of nonthermal, new, and traditional treatments on natural food pigments and color changes in plant materials. Characteristics of natural pigments, such as anthocyanins, betalains, carotenoids, chlorophylls, and so forth available in the plant tissue, are shortly presented. Also, the characteristics and mechanism of nonthermal processes such as pulsed electric field, ultrasound, high hydrostatic pressure, pulsed light, cold plasma, supercritical fluid extraction, and lactic acid fermentation are described. Furthermore, the disadvantages of these processes are mentioned. Each treatment is evaluated in terms of its effects on all types of natural food pigments, and the possible applications are discussed. Analysis of the latest literature showed that the use of nonthermal technologies resulted in better preservation of pigments contained in the plant tissue and improved yield of extraction. However, it is important to select the appropriate processing parameters and to optimize this process in relation to a specific type of raw material.