Enhanced Agarose and Xylan Degradation for Production of Polyhydroxyalkanoates by Co-Culture of Marine Bacterium, Saccharophagus degradans and Its Contaminant, Bacillus cereus

Metabolic conversion of phenol to polyhydroxyalkanoate (PHA) for addressing dual environmental challenges: A review

A sustainable approach to microbial polyhydroxyalkanoate (PHA) production involves utilizing waste as a substrate, which can include toxic pollutants like phenol as a carbon feedstock. Phenol-contaminated effluents offer cost-effective and readily available resources for PHA production, while simultaneously addressing phenol contamination issues. Understanding the metabolic conversion of phenol to PHA is crucial to enhance its efficiency, especially considering phenol's toxicity to microbial cells and the substrate-dependent nature of microbial PHA production. In this review, the mechanisms of phenol biodegradation and PHA biosynthesis are first independently elucidated to comprehend the role of bacteria in these processes. Phenol can be metabolized aerobically via various pathways, including catechol meta-cleavage I and II, catechol ortho-cleavage, protocatechuate ortho-cleavage, and protocatechuate meta-cleavage, as well as anaerobically via 4-hydrozybenzoate and/or n-caproate formation. Meanwhile, PHA can be synthesized through the acetoacetyl-CoA (pathway I), de novo fatty acids synthesis (pathway II), β-oxidation (pathway III), and the tricarboxylic acid (TCA) cycle, with the induction of these pathways are highly dependent on the substrate. Given that the link between these two mechanisms was not comprehensively reported before, the second part of the review delve into understanding phenol conversion into PHA, specifically polyhydroxybutyrate (PHB). While phenol toxicity can inhibit bacterial performance, it can be alleviated through the utilization of microbial mixed culture (MMC), which offers a wider range of metabolic capabilities. Utilizing phenol as a carbon feedstock for PHB accumulation could offer a viable approach to boost PHA's commercialization while addressing the issue of phenol pollution.

Current models in bacterial hemicellulase-encoding gene regulation

The discovery and characterization of bacterial carbohydrate-active enzymes is a fundamental component of biotechnology innovation, particularly for renewable fuels and chemicals; however, these studies have increasingly transitioned to exploring the complex regulation required for recalcitrant polysaccharide utilization. This pivot is largely due to the current need to engineer and optimize enzymes for maximal degradation in industrial or biomedical applications. Given the structural simplicity of a single cellulose polymer, and the relatively few enzyme classes required for complete bioconversion, the regulation of cellulases in bacteria has been thoroughly discussed in the literature. However, the diversity of hemicelluloses found in plant biomass and the multitude of carbohydrate-active enzymes required for their deconstruction has resulted in a less comprehensive understanding of bacterial hemicellulase-encoding gene regulation. Here we review the mechanisms of this process and common themes found in the transcriptomic response during plant biomass utilization. By comparing regulatory systems from both Gram-negative and Gram-positive bacteria, as well as drawing parallels to cellulase regulation, our goals are to highlight the shared and distinct features of bacterial hemicellulase-encoding gene regulation and provide a set of guiding questions to improve our understanding of bacterial lignocellulose utilization. KEY POINTS: • Canonical regulatory mechanisms for bacterial hemicellulase-encoding gene expression include hybrid two-component systems (HTCS), extracytoplasmic function (ECF)-σ/anti-σ systems, and carbon catabolite repression (CCR). • Current transcriptomic approaches are increasingly being used to identify hemicellulase-encoding gene regulatory patterns coupled with computational predictions for transcriptional regulators. • Future work should emphasize genetic approaches to improve systems biology tools available for model bacterial systems and emerging microbes with biotechnology potential. Specifically, optimization of Gram-positive systems will require integration of degradative and fermentative capabilities, while optimization of Gram-negative systems will require bolstering the potency of lignocellulolytic capabilities.

Reductive soil disinfestation influences microbial aging of low-density polyethylene and polyhydroxyalkanoate microplastics and microbial communities in plastispheres

The extensive use of plastic products has led to the accumulation of microplastics (MPs) in agricultural soils, raising concerns about their fate in various environments. Reductive soil disinfestation (RSD) treatment is increasingly being adopted in various countries to address agricultural soil health issues. However, the treatment can alter the soil microbial environment, potentially affecting the fate of contaminants, including MPs. The effect of RSD on the aging of low-density polyethylene (LDPE) and polyhydroxyalkanoates (PHA) MPs was studied through an incubation experiment. The mechanism involved was further investigated by microbial community analysis. The characterization results shown that RSD treatment inhibited the aging of LDPE but promoted the aging of PHA. The results indicated that RSD reshaped the microbial community and reduced the relative abundance of lipid metabolism in the LDPE plastisphere, thereby hindering LDPE aging. Predicted functional genes in the plastispheres were primarily involved in metabolism (77.15-87.48%) and genetic information processing (8.774-12.62%). The enrichment of bacteria related to poly(3-hydroxybutyrate) depolymerase (phaZ) in the PHA plastisphere explained the higher aging degree of PHA during RSD. Some fungus also involved in the MPs aging, while some fungus pathogens can proliferate in the MPs plastispheres. The 3DEEM analysis indicated that PHA MPs aging increased tyrosine-like substances in soil extracts. These findings provide new insights into the ecological implications of RSD and enhance our understanding of microbial communities within plastispheres.

Clindamycin-Loaded Polyhydroxyalkanoate Nanoparticles for the Treatment of Methicillin-Resistant Staphylococcus aureus-Infected Wounds

Background/Objectives: Owing to the growing resistance of methicillin-resistant Staphylococcus aureus (MRSA) to conventional antibiotics, the development of innovative therapeutic strategies for the treatment of MRSA-infected cutaneous wounds poses a significant challenge. Methods: Here, by using polyhydroxyalkanoates (PHA), emerging biodegradable and biocompatible polymers naturally produced by various microorganisms, we developed clindamycin-loaded PHA nanoparticles (Cly-PHA NPs) as a novel approach for the treatment of MRSA-infected cutaneous wounds. Results: Cly-PHA NPs were characterized in terms of mean particle size (216.2 ± 38.9 nm), polydispersity index (0.093 ± 0.03), zeta potential (11.3 ± 0.5 mV), and drug loading (6.76 ± 0.19%). Owing to the sustained release of clindamycin over 2 days provided by the PHA, Cly-PHA NPs exhibited potent antibacterial effects against MRSA. Furthermore, Cly-PHA NPs significantly facilitated wound healing in a mouse model of MRSA-infected full-thickness wounds by effectively eradicating MRSA from the wound bed. Conclusions: Therefore, our results suggest that Cly-PHA NPs offer a promising approach for combating MRSA infections and accelerating cutaneous wound healing.

One-pot treatment of Saccharophagus degradans for polyhydroxyalkanoate production from brown seaweed

The conventional production of polyhydroxyalkanoate (PHA) from waste biomass requires a pretreatment step (acid or alkali) for reducing sugar extraction, followed by bacterial fermentation. This study aims to find a greener approach for PHA production from brown seaweed. Saccharophagus degradans can be a promising bacterium for simultaneous reducing sugar and PHA production, bypassing the need for a pretreatment step. Cell retention cultures of S. degradans in membrane bioreactor resulted in approximately 4- and 3-fold higher PHA concentrations than batch cultures using glucose and seaweed as carbon sources, respectively. X-ray diffraction, Fourier transform infrared spectroscopy, and nuclear magnetic resonance results revealed identical peaks for the resulting PHA and standard poly(3-hydroxybutyrate). The developed one step process using cell retention culture of S. degradans could be a beneficial process for scalable and sustainable PHA production.

Consolidated bioprocessing of plant biomass to polyhydroxyalkanoate by co-culture of Streptomyces sp. SirexAA-E and Priestia megaterium

Polyhydroxyalkanoate (PHA) production from plant biomass is an ideal way to realize sustainable PHA-based bioplastic. The present study demonstrated consolidated bioconversion of plant biomass to PHA by co-culturing two specialized bacteria, cellulolytic Streptomyces sp. SirexAA-E and PHA producing Priestia megaterium. In monoculture, S. sp. SirexAA-E does not produce PHA, while P. megaterium did not grow on plant polysaccharides. The co-culture showed poly(3-hydroxybutyrate) (PHB) production using purified polysaccharides, including cellulose, xylan, mannan and their combinations, and plant biomass (Miscanthus, corn stalk and corn leaves) as sole carbon sources, confirmed by GC-MS. The co-culture inoculated with 1:4 (v/v) ratio of S. sp. SirexAA-E to P. megaterium produced 40 mg PHB/g Miscanthus using 0.5% biomass loading. Realtime PCR showed ∼85% S. sp. SirexAA-E and ∼15% P. megaterium in the co-culture. Thus, this study provides a concept of proof for one-pot bioconversion of plant biomass into PHB without separate saccharification processes.

Bottom-Up Design of a Green and Transient Zinc-Ion Battery with Ultralong Lifespan

Transient batteries are expected to lessen the inherent environmental impact of traditional batteries that rely on toxic and critical raw materials. This work presents the bottom-up design of a fully transient Zn-ion battery (ZIB) made of nontoxic and earth-abundant elements, including a novel hydrogel electrolyte prepared by cross-linking agarose and carboxymethyl cellulose. Facilitated by a high ionic conductivity and a high positive zinc-ion species transference number, the optimized hydrogel electrolyte enables stable cycling of the Zn anode with a lifespan extending over 8500 h for 0.25 mA cm^-2 - 0.25 mAh cm^-2 . On pairing with a biocompatible organic polydopamine-based cathode, the full cell ZIB delivers a capacity of 196 mAh g^-1 after 1000 cycles at a current density of 0.5 A g^-1 and a capacity of 110 mAh g^-1 after 10 000 cycles at a current density of 1 A g^-1 . A transient ZIB with a biodegradable agarose casing displays an open circuit voltage of 1.123 V and provides a specific capacity of 157 mAh g^-1 after 200 cycles at a current density of 50 mA g^-1 . After completing its service life, the battery can disintegrate under composting conditions.

Reconstruction and optimization of a Pseudomonas putida-Escherichia coli microbial consortium for mcl-PHA production from lignocellulosic biomass

The demand for non-petroleum-based, especially biodegradable plastics has been on the rise in the last decades. Medium-chain-length polyhydroxyalkanoate (mcl-PHA) is a biopolymer composed of 6–14 carbon atoms produced from renewable feedstocks and has become the focus of research. In recent years, researchers aimed to overcome the disadvantages of single strains, and artificial microbial consortia have been developed into efficient platforms. In this work, we reconstructed the previously developed microbial consortium composed of engineered Pseudomonas putida KT∆ABZF (p2-a-J) and Escherichia coli ∆4D (ACP-SCLAC). The maximum titer of mcl-PHA reached 3.98 g/L using 10 g/L glucose, 5 g/L octanoic acid as substrates by the engineered P. putida KT∆ABZF (p2-a-J). On the other hand, the maximum synthesis capacity of the engineered E. coli ∆4D (ACP-SCLAC) was enhanced to 3.38 g/L acetic acid and 0.67 g/L free fatty acids (FFAs) using 10 g/L xylose as substrate. Based on the concept of “nutrient supply-detoxification,” the engineered E. coli ∆4D (ACP-SCLAC) provided nutrient for the engineered P. putida KT∆ABZF (p2-a-J) and it acted to detoxify the substrates. Through this functional division and rational design of the metabolic pathways, the engineered P. putida-E. coli microbial consortium could produce 1.30 g/L of mcl-PHA from 10 g/L glucose and xylose. Finally, the consortium produced 1.02 g/L of mcl-PHA using lignocellulosic hydrolysate containing 10.50 g/L glucose and 10.21 g/L xylose as the substrate. The consortium developed in this study has good potential for mcl-PHA production and provides a valuable reference for the production of high-value biological products using inexpensive carbon sources.

Direct processing of alginate-immobilized microalgae into polyhydroxybutyrate using marine bacterium of Saccharophagus degradans

Alginate immobilized microalgae (AIM) was found efficient in algal cells separation and pollutants removal, however, its processing required alginate removal. In present study, polysaccharide-degrading bacterium of Saccharophagus degradans was used to biodegrade alginate and microalgae in AIM and produce polyhydroxybutyrate (PHB). Results showed that AIM cultivated in wastewater contained 34.0% carbohydrate and 45.7% protein. S. degradans effectively degraded and utilized polysaccharide of AIM to maintain five-day continuous growth at 7.1-8.8 log CFU/mL. Compared with glucose, S. degradans metabolism of mixed polysaccharide in AIM maintained the medium pH at 7.1-7.8. Increasing the inoculum concentration did not enhance AIM utilization by S. degradans due to the carbon catabolite repression of glucose which likely inactivated hydrolysis enzymes. PHB production in S. degradans peaked at 64.9 mg/L after 72 h cultivation but was later degraded to provide energy. Conclusively, S. degradans was effective in direct processing of AIM while showing potential in PHB production.

Optimization of a Two-Species Microbial Consortium for Improved Mcl-PHA Production From Glucose-Xylose Mixtures

Polyhydroxyalkanoates (PHAs) have attracted much attention as a good substitute for petroleum-based plastics, especially mcl-PHA due to their superior physical and mechanical properties with broader applications. Artificial microbial consortia can solve the problems of low metabolic capacity of single engineered strains and low conversion efficiency of natural consortia while expanding the scope of substrate utilization. Therefore, the use of artificial microbial consortia is considered a promising method for the production of mcl-PHA. In this work, we designed and constructed a microbial consortium composed of engineered Escherichia coli MG1655 and Pseudomonas putida KT2440 based on the "nutrition supply-detoxification" concept, which improved mcl-PHA production from glucose-xylose mixtures. An engineered E. coli that preferentially uses xylose was engineered with an enhanced ability to secrete acetic acid and free fatty acids (FFAs), producing 6.44 g/L acetic acid and 2.51 g/L FFAs with 20 g/L xylose as substrate. The mcl-PHA producing strain of P. putida in the microbial consortium has been engineered to enhance its ability to convert acetic acid and FFAs into mcl-PHA, producing 0.75 g/L mcl-PHA with mixed substrates consisting of glucose, acetic acid, and octanoate, while also reducing the growth inhibition of E. coli by acetic acid. The further developed artificial microbial consortium finally produced 1.32 g/L of mcl-PHA from 20 g/L of a glucose-xylose mixture (1:1) after substrate competition control and process optimization. The substrate utilization and product synthesis functions were successfully divided into the two strains in the constructed artificial microbial consortium, and a mutually beneficial symbiosis of "nutrition supply-detoxification" with a relatively high mcl-PHA titer was achieved, enabling the efficient accumulation of mcl-PHA. The consortium developed in this study is a potential platform for mcl-PHA production from lignocellulosic biomass.

The power of two: An artificial microbial consortium for the conversion of inulin into Polyhydroxyalkanoates

One of the major issues for the microbial production of polyhydroxyalkanoates (PHA) is to secure renewable, non-food biomass feedstocks to feed the fermentation process. Inulin, a polydisperse fructan that accumulates as reserve polysaccharide in the roots of several low-requirement crops, has the potential to face this challenge. In this work, a "substrate facilitator" microbial consortium was designed to address PHA production using inulin as feedstock. A microbial collection of Bacillus species was screened for efficient inulinase producer and the genome of the selected strain, RHF15, identified as Bacillus gibsonii, was analysed unravelling its wide catabolic potential. RHF15 was co-cultured with Cupriavidus necator, an established PHA producer, lacking the ability to metabolize inulin. A Central Composite Rotary Design (CCRD) was applied to optimise PHA synthesis from inulin by the designed artificial microbial consortium, assessing the impact of species inoculum ratio and inulin and N-source concentrations. In the optimized conditions, a maximum of 1.9 g L^-1 of Polyhydroxybutyrate (PHB), corresponding to ~80% (g_polymer/g_CDW) polymer content was achieved. The investigated approach represents an effective process optimization method, potentially applicable to the production of PHA from other complex C- sources.

Emerging technologies for conversion of sustainable algal biomass into value-added products: A state-of-the-art review

Concerns regarding high energy demand and gradual depletion of fossil fuels have attracted the desire of seeking renewable and sustainable alternatives. Similar to but better than the first- and second-generation biomass, algae derived third-generation biorefinery aims to generate value-added products by microbial cell factories and has a great potential due to its abundant, carbohydrate-rich and lignin-lacking properties. However, it is crucial to establish an efficient process with higher competitiveness over the current petroleum industry to effectively utilize algal resources. In this review, we summarize the recent technological advances in maximizing the bioavailability of different algal resources. Following an overview of approaches to enhancing the hydrolytic efficiency, we review prominent opportunities involved in microbial conversion into various value-added products including alcohols, organic acids, biogas and other potential industrial products, and also provide key challenges and trends for future insights into developing biorefineries of marine biomass.

Recent advances in constructing artificial microbial consortia for the production of medium-chain-length polyhydroxyalkanoates

Polyhydroxyalkanoates (PHAs) are a class of high-molecular-weight polyesters made from hydroxy fatty acid monomers. PHAs produced by microorganisms have diverse structures, variable physical properties, and good biodegradability. They exhibit similar physical properties to petroleum-based plastics but are much more environmentally friendly. Medium-chain-length polyhydroxyalkanoates (mcl-PHAs), in particular, have attracted much interest because of their low crystallinity, low glass transition temperature, low tensile strength, high elongation at break, and customizable structure. Nevertheless, high production costs have hindered their practical application. The use of genetically modified organisms can reduce production costs by expanding the scope of substrate utilization, improving the conversion efficiency of substrate to product, and increasing the yield of mcl-PHAs. The yield of mcl-PHAs produced by a pure culture of an engineered microorganism was not high enough because of the limitations of the metabolic capacity of a single microorganism. The construction of artificial microbial consortia and the optimization of microbial co-cultivation have been studied. This type of approach avoids the addition of precursor substances and helps synthesize mcl-PHAs more efficiently. In this paper, we reviewed the design and construction principles and optimized control strategies for artificial microbial consortia that produce mcl-PHAs. We described the metabolic advantages of co-cultivating artificial microbial consortia using low-value substrates and discussed future perspectives on the production of mcl-PHAs using artificial microbial consortia.

Biodegradability of poly(3-hydroxyalkanoate) and poly(ε-caprolactone) via biological carbon cycles in marine environments

Approximately 4.8–12.7 million tons of plastic waste has been estimated to be discharged into marine environments annually by wind and river currents. The Ellen MacArthur Foundation warns that the total weight of plastic waste in the oceans will exceed the total weight of fish in 2050 if the environmental runoff of plastic continues at the current rate. Hence, biodegradable plastics are attracting attention as a solution to the problems caused by plastic waste. Among biodegradable plastics, polyhydroxyalkanoates (PHAs) and poly(ε-caprolactone) (PCL) are particularly noteworthy because of their excellent marine biodegradability. In this review, the biosynthesis of PHA and cutin, a natural analog of PCL, and the biodegradation of PHA and PCL in carbon cycles in marine ecosystems are discussed. PHA is biosynthesized and biodegraded by various marine microbes in a wide range of marine environments, including coastal, shallow-water, and deep-sea environments. Marine cutin is biosynthesized by marine plants or obtained from terrestrial environments, and PCL and cutin are biodegraded by cutin hydrolytic enzyme-producing microbes in broad marine environments. Thus, biological carbon cycles for PHA and PCL exist in the marine environment, which would allow materials made of PHA and PCL to be quickly mineralized in marine environments.

Recent Advances and Challenges towards Sustainable Polyhydroxyalkanoate (PHA) Production

Sustainable biofuels, biomaterials, and fine chemicals production is a critical matter that research teams around the globe are focusing on nowadays. Polyhydroxyalkanoates represent one of the biomaterials of the future due to their physicochemical properties, biodegradability, and biocompatibility. Designing efficient and economic bioprocesses, combined with the respective social and environmental benefits, has brought together scientists from different backgrounds highlighting the multidisciplinary character of such a venture. In the current review, challenges and opportunities regarding polyhydroxyalkanoate production are presented and discussed, covering key steps of their overall production process by applying pure and mixed culture biotechnology, from raw bioprocess development to downstream processing.