In Vitro Molecular Study of Titanium-Niobium Alloy Biocompatibility

Compression and bending performance of selective laser melted Ti6Al4V porous structures with cylindrical thin walls for dental implants

Titanium alloy dental implants play a crucial role in the field of oral rehabilitation. However, the use of solid designs can give rise to mechanical problems such as mismatched compressive elastic modulus with the host bone tissue, resulting in stress shielding and stress concentration. These problems have been a persistent bottleneck in their application effectiveness. To overcome this challenge, this study creatively designed five types of porous structures with cylindrical thin wall based on the Gibson-Ashby theoretical model. The aim is to optimize the mechanical performance of dental implants, enhance their compatibility with the host bone tissue, and utilize selective laser melting technology for precise fabrication of porous structures using Ti6Al4V material. Through a combination of simulation analysis and compression experiments, the stress and strain distributions of the five structures are systematically investigated under different bite conditions. The experimental results demonstrate that all five porous structures designed in this study effectively alleviate stress shielding phenomenon in dental implants, significantly improving the bonding performance between the implants and bone tissue. This meets the clinical implantation requirements and provides strong theoretical support for the application of dental implants in clinical settings.

A Comprehensive Review of Niobium Nanoparticles: Synthesis, Characterization, Applications in Health Sciences, and Future Challenges

Niobium nanoparticles (NbNPs) have gained attention as promising materials in biomedical applications due to their exceptional biocompatibility, corrosion resistance, and versatility. These nanoparticles offer potential in drug delivery, imaging, and tissue engineering, where their nanoscale properties allow precise interactions with biological systems. Among niobium-based nanomaterials, niobium pentoxide (Nb2O5) is the most extensively studied due to its chemical stability, bioactivity, and optical properties. Nb2O5 nanoparticles have shown significant potential in catalysis, biosensing, and photodynamic therapy, as their stability and reactivity make them ideal for functionalization in advanced biomedical applications. Despite these advantages, challenges remain regarding the biodegradability and long-term retention of NbNPs in biological systems. Their accumulation in tissues can lead to risks such as chronic inflammation or toxicity, emphasizing the importance of designing nanoparticles with controlled clearance and biodegradability. Surface modifications, such as coatings with biocompatible polymers, have demonstrated the ability to mitigate these risks while enhancing therapeutic efficacy. This review provides a comprehensive overview of NbNPs, with a focus on Nb2O5, highlighting their unique properties, current biomedical applications, and limitations. By addressing the remaining challenges, this work aims to guide the development of safer and more effective niobium-based nanomaterials for future medical innovations.

Exploring the Broad Spectrum of Titanium-Niobium Implants and Hydroxyapatite Coatings-A Review

Tooth loss replacement using dental implants is becoming more frequent. Traditional dental implant materials such as commercially pure titanium and titanium aluminum vanadium alloys have well-proven mechanical and biological properties. New titanium alloying metals such as niobium provide improved mechanical properties such as lower elastic modulus while displaying comparable or even better biocompatibility. Hydroxyapatite coatings are a well-documented and widely used method for enhancing dental implants' surface characteristics and properties and could provide a useful tool for further enhancing titanium-niobium implant properties like osteointegration. Among several coating techniques, physical deposition methods and, in particular, vapour deposition ones are the most used due to their advantages compared to wet deposition techniques for hydroxyapatite coating of metallic surfaces like that of dental implants. Considering the scarcity of data concerning the in vivo evaluation of titanium-niobium biocompatibility and osteointegration and the lack of studies investigating coating these new proposed alloys with hydroxyapatite, this review aims to further knowledge on hydroxyapatite-coated titanium niobium alloys.

Assessing Microstructural, Biomechanical, and Biocompatible Properties of TiNb Alloys for Potential Use as Load-Bearing Implants

Titanium-Niobium (TiNb) alloys are commonly employed in a number of implantable devices, yet concerns exist regarding their use in implantology owing to the biomechanical mismatch between the implant and the host tissue. Therefore, to balance the mechanical performance of the load-bearing implant with bone, TiNb alloys with differing porosities were fabricated by powder metallurgy combined with spacer material. Microstructures and phase constituents were characterized with energy dispersive spectroscopy (EDS), scanning electron microscopy (SEM), and X-ray diffraction (XRD). The mechanical properties were tested by uniaxial compression, and the corrosion performance was determined via a potentiodynamic polarization experiment. To evaluate a highly matched potential implant with the host, biocompatibilities such as cell viability and proliferation rate, fibronectin adsorption, plasmid-DNA interaction, and an SEM micrograph showing the cell morphology were examined in detail. The results showed that the alloys displayed open and closed pores with a uniform pore size and distribution, which allowed for cell adherence and other cellular activities. The alloys with low porosity displayed compressive strength between 618 MPa and 1295 MPa, while the alloys with high porosity showed significantly lower strength, ranging from 48 MPa to 331 MPa. The biological evaluation of the alloys demonstrated good cell attachment and proliferation rates.

In situ production of low-modulus Ti-Nb alloys by selective laser melting and their functional assessment toward orthopedic applications

This work aimed to manufacture Ti-28.5Nb and Ti-40.0Nb (wt%) alloys in situ via selective laser melting (SLM) from Ti and Nb elemental powders. X-ray diffraction analysis revealed complete β-phase (cubic) in Ti-40.0Nb and a mixture of (α'' orthorhombic + β cubic) phases in Ti-28.5Nb were formed, whereas few of the Nb particles remained only partially fused during manufacturing. The fraction of partially melted Nb particles was determined as ∼2 and ∼18% in Ti-28.5Nb and Ti-40Nb, respectively. Mechanical characterization revealed higher hardness and more strength in Ti-28.5Nb than in Ti-40.0Nb due to the presence of the α'' phase in the former. Tribocorrosion tests reveal a significantly better wear-corrosion resistance for Ti-40.0Nb, as determined from a lower total volume loss in Ti-40.0Nb (∼2 × 10-4 mm-3) than in Ti-28.5Nb (∼13 × 10-2 mm-3). The lower volume loss and better corrosion resistance behavior are attributed to the β phase, which was dominant in Ti-40.0Nb. Cell studies reveal no toxicity for up to 7 days. Both the alloys were better at supporting cell proliferation than wrought Ti6Al4V. This study presents a route to preparing Ti-Nb alloys in situ by SLM that are promising candidates for biomedical applications.

Enhanced antibacterial activity and superior biocompatibility of cobalt-deposited titanium discs for possible use in implant dentistry

The clinical success of implants depends on rapid osseointegration, and new materials are being developed considering the increasing demand. Considering cobalt (Co) antibacterial characteristics, we developed Co-deposited titanium (Ti) using direct current (DC) sputtering and investigated it as a new material for implant dentistry. The material was characterized using atomic absorption spectroscopy, scanning electron microscopy-energy dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy. The material's surface topography, roughness, surface wettability, and hardness were also analyzed. The Co thin film (Ti-Co15) showed excellent antibacterial effects against microbes implicated in peri-implantitis. Furthermore, Ti-Co15 was compatible and favored the attachment and spreading of MG-63 cells. The alkaline phosphatase and calcium mineralization activities of MG-63 cells cultured on Ti-Co15 remained unaltered compared to Ti. These data correlated well with the time-dependent expression of ALP, RUNX-2, and BMP-2 genes involved in osteogenesis. The results demonstrate that Co-deposited Ti could be a promising material in implant dentistry.